LG LSN240HEV2 Le manuel du propriétaire

FRANÇAIS ESPAÑOLENGLISH

OWNER'S MANUAL

AIR

CONDITIONER

Read this owner's manual thoroughly before operating the appliance and

keep it handy for reference at all times.

TYPE: WALL MOUNTED

www.lg.com

MFL69491103

Rev.03_113018

TABLE OF CONTENTS

2 TABLE OF CONTENTS

3 SAFETY INSTRUCTIONS

3 IMPORTANT SAFETY INSTRUCTIONS

7 OPERATION

7 Notes for Operation

7 Parts and Functions

8 Wireless Remote Control

13 Restarting the Air Conditioner Automatically

13 Using the Mode Function

15 Using the Jet Mode Function

16 Using the Fan Speed Function

16 Using the Air Flow Direction Function

17 Setting the On/Off Timer

18 Using the Sleep Function (Optional)

18 Using the Simple Timer Function (Optional)

19 Using the Energy Display Function (Optional)

19 Using the Light Off Function (Optional)

19 Using the Comfort Air Function (Optional)

20 Using the Energy Saving Function (Optional)

20 Using the Energy Control Function (Optional)

21 Using Special Functions

24 SMART FUNCTIONS

24 Using LG SmartThinQ Application

27 MAINTENANCE

29 Clean the Air Filter

30 Clean the 3M and Triple Filter (Optional)

31 TROUBLESHOOTING

35 WARRANTY (USA)

37 WARRANTY (CANADA)

3SAFETY INSTRUCTIONS

ENGLISH

SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always

read and follow all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or injure you and others.

All safety messages will follow the safety alert symbol and either the word WARNING, or

CAUTION.

WARNING

If you do not follow instructions, it could result in death or serious injury.

CAUTION

If you do not follow instructions, it could result in minor or moderate injury or damage to the

product.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of

injury, and tell you what may happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of explosion, fire, death, electric shock, injury or scalding to persons

when using this product, follow basic precautions, including the following:

• Installation or repairs made by unauthorized persons can pose hazards to you and others.

• Installation MUST conform to the local building codes or, in the absence of local codes, the

National Electrical Code NFPA 70/ANSI C1-1003 or current edition and Canadian Electrical Code

Part1 CSA C.22. 1.

• The information contained in the manual is intended for use by a qualified service technician who

is familiar with the safety procedures and equipped with the proper tools and test instruments.

• Failure to read and follow all instructions in this manual can result in equipment malfunction,

property damage, personal injury and/or death.

• When the power cord is to be replaced, the replacement work shall be performed by authorized

personnel using only genuine replacement parts.

• This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

4 SAFETY INSTRUCTIONS

Installation

• Do not install the air conditioner on an unstable surface or in a place where there is danger of it

falling.

• Contact an authorized service center when installing or relocating the air conditioner.

• Install the panel and the cover of the control box safely.

• Do not install the air conditioner in a place where flammable liquids or gases such as gasoline,

propane, paint thinner, etc., are stored.

• Make sure that the pipe and the power cable connecting the indoor and outdoor units are not

pulled too tight when installing the air conditioner.

• Use standard circuit breaker and fuse that conform to the rating of the air conditioner.

• Do not input air or gas into the system except with the specific refrigerant.

• Use non-flammable gas (nitrogen) to check for leak and to purge air; using compressed air or

flammable gas may cause fire or explosion.

• The indoor/outdoor wiring connections must be secured tightly, and the cable should be routed

properly so that there is no force pulling the cable from the connection terminals. Improper or

loose connections can cause heat generation or fire.

• Install dedicated electric outlet and circuit breaker before using the air conditioner.

• Do not connect the ground wire to a gas pipe, a lightning rod, or a telephone ground wire.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualified person in order to avoid a hazard.

Operation

• Be sure to use only those parts listed in the service parts list. Never attempt to modify the

equipment.

• Make sure that children do not climb on or hit the outdoor unit.

• Dispose of the batteries in a place where there is no danger of fire.

• Use only the refrigerant specified on the air conditioner label.

• Cut off the power supply if there is any noise, smell, or smoke coming from the air conditioner.

• Do not leave flammable substances such as gasoline, benzene, or thinner near the air conditioner.

• Contact an authorized service center when the air conditioner is submerged by flood waters.

• Do not use the air conditioner for an extended period of time in a small place without proper

ventilation.

• In the event of a gas leak (such as Freon, propane gas, LP gas, etc.) ventilate sufficiently before

using the air conditioner again.

• To clean the interior, contact an authorized service center or dealer. Using harsh detergents may

cause corrosion or damage to the unit.

5SAFETY INSTRUCTIONS

ENGLISH

• Be sure to ventilate sufficiently when the air conditioner and a heating appliance such as a heater

are used simultaneously.

• Do not block the inlet or outlet of air flow.

• Do not insert hands or other objects through the air inlet or outlet while the air conditioner is

operating.

• Make sure that the power cable is neither dirty, loose, nor broken.

• Never touch, operate, or repair the air conditioner with wet hands.

• Do not place any objects on the power cable.

• Do not place a heater or other heating appliances near the power cable.

• Do not modify or extend the power cable. Scratches or peeling insulation on the power cables

may result in fire or electric shock, and should be replaced.

• Cut off the power supply immediately in the event of a blackout or a thunderstorm.

• Take care to ensure that power cable could not be pulled out or damaged during operation.

• Do not touch refrigerant pipe, water pipe and any internal parts while the unit is operating or

immediately after operation.

Maintenance

• Do not clean the appliance by spraying water directly onto the product.

• Before cleaning or performing maintenance, disconnect the power supply and wait until the fan

stops.

CAUTION

To reduce the risk of minor injury to persons, malfunction, or damage to the product or

property when using this product, follow basic precautions, including the following:

Installation

• Do not install the air conditioner in an area where it is directly exposed to sea wind (salt spray).

• Install the drain hose properly for the smooth drainage of water condensation.

• Exercise caution when unpacking or installing the air conditioner.

• Do not touch the leaking refrigerant during installation or repair.

• Transport the air conditioner with two or more people or use a forklift.

• Install the outdoor unit such that it is protected from direct sunlight. Do not place the indoor unit in

a place where it is directly exposed to sunlight via the windows.

• Safely dispose of packing materials such as screws, nails or batteries using proper packaging

after installation or repair.

• Install the air conditioner in a place where the noise from the outdoor unit or the exhaust fumes will

not inconvenience the neighbors. Failure to do so may result in conflict with the neighbors.

6 SAFETY INSTRUCTIONS

Operation

• Remove the batteries if the remote control is not to be used for an extended period of time.

• Make sure that the filter is installed before operating the air conditioner.

• Be sure to check if there is a refrigerant leak after installing or repairing the air conditioner.

• Follow the standards of the corresponding region or country for handling the refrigerant and the air

conditioner and for disassembling the air conditioner.

• Do not place any object on the air conditioner.

• Never mix different types of batteries, or old and new batteries for the remote control.

• Do not let the air conditioner run for a long time when humidity is very high or when a door or a

window has been left open.

• Stop using the remote control if there is a fluid leak in the battery. If your clothes or skin are

exposed to the leaking battery fluid, wash off with clean water.

• Do not expose people, animals, or plants to the cold or hot wind from the air conditioner for

extended periods of time.

• If the leaking battery fluid has been swallowed, rinse the inside of the mouth thoroughly and

consult a doctor.

• Do not drink the water drained from the air conditioner.

• Do not use the product for special purposes, such as preserving foods, works of art, and etc. It

is an air conditioner for consumer purposes, not a precision refrigeration system. There is risk of

damage or loss of property.

• Do not recharge or disassemble the batteries.

Maintenance

• Never touch the metal parts of the air conditioner when removing the air filter.

• Use a sturdy stool or ladder when cleaning, maintaining, or repairing the air conditioner at a

height.

• Never use strong cleaning agents or solvents when cleaning the air conditioner or spray water.

Use a smooth cloth.

7OPERATION

ENGLISH

OPERATION

Notes for Operation

Suggestion for Energy Saving

• Do not over-cool the space. This may be harmful for your health and may consume more electricity.

• Block sunlight with blinds or curtains while you are operating the air conditioner.

• Keep doors or windows closed tightly while you are operating the air conditioner.

• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.

• Speed up the fan to cool or warm indoor air quickly, within a short period of time.

• Open windows regularly for ventilation. The indoor air quality may deteriorate if the air conditioner is used for

long durations.

• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block the air flow or

reduce the unit performance.

Parts and Functions

Indoor Unit Outdoor Unit

1

Air Filter

2

Air Intake

3

Front Cover

4

Air Outlet

5

Air Deflector (Horizontal Vane)

6

Air Deflector (Vertical Louver)

7

On/Off Button

1

Air Intake Vents

2

Air Outlet Vents

NOTE

• The number and location of operation lamps may vary according to the model of the air conditioner.

• The feature may be changed according to the type of model.

8 OPERATION

Wireless Remote Control

Inserting Batteries

If the display screen of the remote control begins

to fade, replace the batteries. Insert AAA (1.5 V)

batteries before using the remote control.

1

Remove the battery cover.

2

Insert the new batteries and make sure that the

+ and - terminals of the batteries are installed

correctly.

Installing the Remote Control Holder

To protect the remote control, install the holder where

there is no direct sunlight.

1

Choose a safe and easily accessible location.

2

Fix the holder by fastening 2 screws firmly with a

screwdriver.

Operating Method

Point the remote control towards the signal receiver

at the right side of the air conditioner to operate it.

NOTE

• The remote control may operate other electronic

devices if it is directed towards them. Make sure to

point the remote control towards the air conditioner

signal receiver.

• For proper operation, use a soft cloth to clean the

signal transmitter and receiver.

• In case of a function not provided in the product,

no buzzer sound occurs from the product when

a button for such function on the remote control

is pressed except for Air Flow Direction (

SWING

),

Energy Display ( ), Air Purification function ( ).

9OPERATION

ENGLISH

Setting the Current Time

1

Insert batteries.

• The icon below blinks at the bottom of the

display screen.

2

Press or button to select the minutes.

3

Press SET/CANCEL button to finish.

NOTE

• The On/Off Timer is available after setting the

current time.

Using the °C/°F Conversion Function

(Optional)

This function changes unit between °C and °F

• Press and hold

SWING

button about 5 seconds.

Operating the Air Conditioner without

the Remote Control

You can use the ON/OFF button of the indoor unit to

operate the air conditioner when the remote control is

unavailable.

1

Open the front cover (Type2) or horizontal vane

(Type1).

2

Press the ON/OFF button.

Type1

ON/OFF

Type2

ON/OFF

NOTE

• The stepping motor may be broken, if the horizontal

vane opens rapidly.

• The fan speed is set to high.

• The feature may be changed according to the type

of model.

• The temperature cannot be altered when using this

emergency ON/OFF button.

• For cooling-only models, the temperature is set to

22 °C

• For cooling & heating models, the temperature is

set from 22 °C to 24 °C

10 OPERATION

Using Wireless Remote Control

You can operate the air conditioner more conveniently with the remote control.

SWING

kW [3 s]

℃↔℉ [5 s]

DIAGNOSIS [5 s]

SWING

SET UP

ROOM

TEMP

JET

MODE

TEMP

FAN

SPEED

FUNC.

TIMER CANCEL

SET

CANCEL

*

1

2

*

RESET

Button

Display

Screen

Description

- To turn on/off the air conditioner.

To adjust the desired room

temperature in cooling, heating or

auto changeover mode.

MODE

To select the cooling mode.

To select the heating mode.

To select the dehumidification mode.

To select the fan mode.

To select the auto changeover/auto

operation mode.

JET

MODE

To change room temperature quickly.

FAN

SPEED

To adjust the fan speed.

SWING

To adjust the air flow direction

vertically or horizontally.

NOTE

• * buttons may be changed according to the type of model.

11OPERATION

ENGLISH

SWING

kW [3 s]

℃↔℉ [5 s]

DIAGNOSIS [5 s]

SWING

SET UP

ROOM

TEMP

JET

MODE

TEMP

FAN

SPEED

FUNC.

TIMER CANCEL

SET

CANCEL

*

1

2

*

RESET

Button

Display

Screen

Description

TIMER

To turn on/off air conditioner

automatically at desired time.

SET/

CANCEL

-

To set/cancel the special functions

and timer.

CANCEL

- To cancel the timer settings.

- To adjust time.

*LIGHT

OFF

-

To set the brightness of the display on

the indoor unit.

ROOM

TEMP

To display the room temperature.

°C↔°F [5 s] To change unit between °C and °F

*ENERGY

SAVING

To minimize power consumption.

*COMFORT

AIR

To adjust the air flow to deflect wind.

kW [3 s] -

To set whether or not to display

information regarding energy.

*ENERGY

CTRL

To bring the effect of the power

saving.

*COMFORT

SLEEP

To make a comfortable sleeping

environment.

DIAGNOSIS

[5 s]

-

To conveniently check maintenance

information of a product.

12 OPERATION

SWING

kW [3 s]

℃↔℉ [5 s]

DIAGNOSIS [5 s]

SWING

SET UP

ROOM

TEMP

JET

MODE

TEMP

FAN

SPEED

FUNC.

TIMER CANCEL

SET

CANCEL

*

1

2

*

RESET

Button

Display

Screen

Description

FUNC.

The Ion generator uses millions of

ions to help improve indoor air quality.

To reduce noise from outdoor units.

To keep your skin moisturized by

generating ion clusters.

To lower indoor humidity quickly.

To maintain a minimum room

temperature and prevent objects in

the room from freezing.

To scare away a mosquito.

To remove moisture generated inside

the indoor unit.

To make a comfortable sleeping

environment.

RESET -

To initialize the remote control

settings.

NOTE

• Some functions may not be supported, depending on the model.

• * buttons may be changed according to the type of model.

• Press the SET/CANCEL button to operate the selected FUNC.

13OPERATION

ENGLISH

Restarting the Air Conditioner

Automatically

When the air conditioner is turned on again after

a power failure, this function restores the previous

settings.

Disabling Auto Restart

1

Open the front cover (Type2) or horizontal vane

(Type1).

2

Press the ON/OFF button and hold it for 6

seconds, then the unit will beep twice and the

lamp will blink twice 4 times.

• To re-enable the function, press the ON/OFF

button and hold it for 6 seconds. The unit will

beep twice and the lamp will blink 4 times.

Type1

ON/OFF

Type2

ON/OFF

NOTE

• The feature may be changed according to the type

of model.

• If you press and hold the ON/OFF button for 3 – 5

seconds, instead of 6 seconds, the unit will switch

to the test operation. In the test operation, the unit

blows out strong cooling air for 18 minutes and

then returns to factory default settings.

Using the Mode Function

This function allows you to select the desired

function.

Cooling Only Model

Cooling Mode

Auto Operation(AI) Mode

Dehumidification Mode

Fan Mode

Cooling & Heating Model

Cooling Mode

Auto Changeover Mode

Dehumidification Mode

Heating Mode

Fan Mode

Cooling Mode

1

Turn the appliance on.

2

Press MODE button repeatedly to select the

Cooling Mode.

• is displayed on the display screen.

3

Press or button to set the desired

temperature.

14 OPERATION

Auto Operation (Artificial

Intelligence)

Cooling Only Model

This mode automatically sets the fan speed and

temperature depending on the room temperature.

1

Turn the appliance on.

2

Press MODE button repeatedly to select the Auto

Operation.

• is displayed on the display screen.

3

Press or button to select the desired

operation code if the temperature is higher or

lower than the desired temperature.

Code Description

2 Cold

1 A little cold

0 Maintain room temperature

-1 A little hot

-2 Hot

NOTE

• In this mode, you cannot adjust the fan speed, but

you can set the air deflector to rotate automatically.

Auto Changeover Mode

Cooling & Heating Model

This mode changes the mode automatically to

maintain the set temperature at ±2 °C

1

Turn the appliance on.

2

Press MODE button repeatedly to select the Auto

Changeover Mode.

• is displayed on the display screen.

3

Press or button to set the desired

temperature.

4

Press FAN SPEED button to adjust the fan

speed.

Dehumidification Mode

This mode removes excess moisture from a highly

humid environment or during the rainy season,

in order to prevent mildew from setting in. This

mode adjusts the room temperature and the fan

speed automatically to maintain the optimal level of

humidity.

1

Turn the appliance on.

2

Press MODE button repeatedly to select the

Dehumidification Mode.

• is displayed on the display screen.

NOTE

• In this mode you cannot adjust the room

temperature, it is adjusted automatically.

• The room temperature is not displayed on the

display screen.

15OPERATION

ENGLISH

Heating Mode

1

Turn the appliance on.

2

Press MODE button repeatedly to select the

Heating Mode.

• is displayed on the display screen.

3

Press or button to set the desired

temperature.

NOTE

• will be displayed on the indoor unit when

defrosting is operating.

• Furthermore, this indication will be displayed on the

indoor unit:

− When preheating is operating.

− When the room temperature has been reached

to the set temperature.

Fan Mode

This mode only circulates the indoor air without

changing the room temperature.

1

Turn the appliance on.

2

Press MODE button repeatedly to select the Fan

Mode.

• is displayed on the display screen.

3

Press FAN SPEED button to adjust the fan

speed.

Using the Jet Mode Function

Changing Room Temperature

Quickly

This function allows you to cool indoor air quickly

during the summer or warm it quickly during winter.

• Cooling & Heating model : The Jet Mode

function is available with Cooling, Heating and

Dehumidification Mode.

• Cooling Only model : The Jet Mode function is

available with Cooling, Dehumidification, Fan, Auto

Operation Mode and Air Purification function.

1

Turn the appliance on.

2

Press MODE button repeatedly to select the

desired mode.

3

Press JET MODE button.

• is displayed on the display screen.

NOTE

• Jet Heating Mode is not available on some models.

• In Jet Cooling Mode, strong air blows out for 30

minutes.

• After 30 minutes later, setting temperature is

maintaining 18 °C

If you want to change the temperature, Press

or button to set the desired temperature.

• In Jet Heating Mode, strong air blows out for 30

minutes.

• After 30 minutes later, setting temperature is

maintaining 30 °C

If you want to change the temperature, Press

or button to set the desired temperature.

• This function may operate differently from the

remote control display.

16 OPERATION

Using the Fan Speed

Function

Adjusting the Fan Speed

• Press FAN SPEED button repeatedly to adjust the

fan speed.

Display Screen Speed

High

Medium - High

Medium

Medium - Low

Low

- Natural Wind

NOTE

• The fan speed of Natural Wind adjusts

automatically.

→ →

• The fan speed icons are displayed on some indoor

units.

→ → → →

• Indoor unit display is displayed only 5 seconds and

return to the setting temperature on some models.

Using the Air Flow Direction

Function

This function adjusts the direction of the air flow

vertically (horizontally).

• Press

SWING

(

SWING

) button repeatedly and select the

desired direction.

− Select ( ) to adjust the direction of the air

flow automatically.

NOTE

• Adjusting the air flow direction horizontally may not

be supported, depending on the model.

• Adjusting the air deflector arbitrarily may cause

product failure.

• If you restart the air conditioner, it starts to operate

with the previously set direction of air flow, so the

air deflector may not match the icon displayed on

the remote control. When this occurs, press

SWING

or

SWING

button to adjust the direction of the air flow

again.

• This function may operate differently from the

remote control display.

17OPERATION

ENGLISH

Setting the On/Off Timer

This function sets the air conditioner to turn on/off

automatically at desired time.

On/Off Timer can be set together.

Setting the On Timer

1

Press

TIMER

button repeatedly.

• The icon below blinks at the bottom of the

display screen.

2

Press or button to select the minutes.

3

Press SET/CANCEL button to finish.

• After setting the timer, current time and icon

are displayed on the display screen indicating

that the desired time is set.

Canceling the On Timer

1

Press

TIMER

button repeatedly.

• The icon below blinks at the bottom of the

display screen.

2

Press SET/CANCEL button to cancel the setting.

Setting the Off Timer

1

Press

TIMER

button repeatedly.

• The icon below blinks at the bottom of the

display screen.

2

Press or button to select the minutes.

3

Press SET/CANCEL button to finish.

• After setting the timer, current time and icon

are displayed on the display screen indicating

that the desired time is set.

NOTE

• This function is disabled when you set Simple

Timer.

Canceling the Off Timer

1

Press

TIMER

button repeatedly.

• The icon below blinks at the bottom of the

display screen.

2

Press SET/CANCEL button to cancel the setting.

Canceling the Timer Setting

• Press

CANCEL

button to cancel all timer settings.

18 OPERATION

Using the Sleep Function

(Optional)

This function turns off the air conditioner

automatically when you go to sleep.

1

Turn the appliance on.

2

Press

TIMER

button repeatedly.

• The icon below blinks at the bottom of the

display screen.

3

Press or button to select the hour (up to

7 hours).

4

Press SET/CANCEL button to finish.

• is displayed on the display screen.

NOTE

• is displayed on some indoor units.

• Indoor unit display is displayed from 1H to 7H

which is displayed only 5 seconds and then return

to the setting temperature.

• In the Cooling and Dehumidification Mode, the

temperature increases by 1 °C after 30 minutes

and additional 1 °C after another 30 minutes for a

more comfortable sleep.

• The temperature increases up to 2 °C from the

preset temperature.

• Although the remark for fan speed on the display

screen may be changed, the fan speed is adjusted

automatically.

Using the Simple Timer

Function (Optional)

This function turns off the air conditioner

automatically when you go to sleep.

1

Turn the appliance on.

2

Press

TIMER

button repeatedly.

• The icon below blinks at the bottom of the

display screen.

3

Press or button to select the hour (up to

7 hours).

4

Press SET/CANCEL button to finish.

• is displayed on the display screen.

NOTE

• This function is disabled when you set Off Timer.

19OPERATION

ENGLISH

Using the Energy Display

Function (Optional)

This function displays the amount of electricity

generated on the indoor display as the product

operates.

Display the Current Energy Usage

1

Turn the appliance on.

2

Press button and hold it about 3 seconds.

• The instantaneous power consumption ( or

kW

kWh

) is displayed for a while on some indoor

units.

Display the Cumulative Energy

Usage (Optional)

1

Turn the appliance on.

2

Press button and hold it about 3 seconds

twice.

• The cumulative power consumption (

kW

kWh

) is

displayed for a while on some indoor units.

NOTE

• It is not displayed on the wireless remote control.

• kW refers to instantaneous power consumption.

• kWh refers to cumulative power consumption.

• If it is more than 99 kWh, which is the range of

expression, maintain it as 99 kWh.

• Power off resets its value.

• Display wattage under 10 kW(h) with 0.1 kW(h)

unit, and display one over 10 kW(h) with 1 kW(h)

unit.

• The actual power may differ from the power

displayed.

Using the Light Off Function

(Optional)

Display Screen Brightness

You can set the brightness of the indoor unit display

screen.

• Press LIGHT OFF button.

NOTE

• Turn on/off the Display screen.

Using the Comfort Air

Function (Optional)

Comfort Vane Operation

This function conveniently sets the vane to a preset

position to deflect the supply air away from blowing

directly onto the occupants in the room.

1

Turn the appliance on.

2

Press COMFORT AIR button repeatedly and

select the desired direction.

• or is displayed on the display screen.

NOTE

• or is displayed on some indoor units.

• This function is disabled when you press MODE or

JET MODE button.

• This function is disabled and auto swing of vertical

direction is set up when you press

SWING

button.

• When this function is off, the horizontal vane

operates automatically depending on the set mode.

20 OPERATION

Using the Energy Saving

Function (Optional)

This function minimizes power consumption during

Cooling and increases the set temperature to the

optimal level for a more comfortable environment.

The temperature automatically settles at 22 °C if

desired temperature is below 22 °C The temperature

remains constant if it is above 22 °C

1

Turn the appliance on.

2

Press MODE button repeatedly to select the

Cooling Mode.

3

Press ENERGY SAVING button.

• is displayed on the display screen.

Using the Energy Control

Function (Optional)

1

Turn the appliance on.

2

Press ENERGY CTRL button.

• Press ENERGY CTRL button repeatedly to

select each step.

NOTE

• 1 step : The power Input is decreased by 20 %

compared to rated power input.

− is displayed on the display screen.

• 2 step : The power Input is decreased by 40 %

compared to rated power input.

− is displayed on the display screen.

• 3 step (Optional) : The power Input is decreased by

60 % compared to rated power input.

− is displayed on the display screen.

• (1 step), (2 step) is displayed on some indoor

units.

• This function is available with Cooling Mode.

• Capacity may decrease when Energy Control mode

is selected.

• Desired temperature is displayed about 5 seconds

if you press FAN SPEED,

or button.

• Room temperature is displayed about 5 seconds if

you press ROOM TEMP button.

La page est en cours de chargement...

LG LSN240HEV2 Le manuel du propriétaire

Ce manuel convient également à

LG LSN240HEV2 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents