Orbcomm ST6002 Manuel utilisateur

Catégorie
Antennes réseau
Taper
Manuel utilisateur
ORBCOMM® PROPRIETARY AND CONFIDENTIAL MATERIAL
User Manual
Model: ST6002
Ref T407
Oct 2022
Brand: ORBCOMM Inc.
Address: 395 W Passaic Street, Suite 325, Rochelle Park,
NJ 07662, USA
Visit ORBCOMM online: www.orbcomm.com
Contact Support: partner-support@orbcomm.com
+1 613 836 2222
http://partner-support.orbcomm.com
ST6002 Technical Manual
TABLE OF CONTENTS
TABLE OF CONTENTS ............................................................................................................... 2
1 Product Overview ........................................................................................................................ 4
2 Compliance ................................................................................................................................... 5
3 Satellite Messaging System Overview ........................................................................................ 7
4 Summary of Specifications .......................................................................................................... 8
5 Integration Guidelines ............................................................................................................... 12
ST6002 Technical Manual
T407, Version 05
ORBCOMM® PROPRIETARY AND CONFIDENTIAL MATERIAL © Jun 2019
3
ST6002 Technical Manual
4
1 Product Overview
The ST6002 provides a high performance, low latency, two-way communication solution that uses the
IsatData Pro network.
This OEM device consists of a Lua application controller, integral antennas, a satellite modem for
communicating with the satellite, an integral GNSS subsystem, several input/output feeds capable of
monitoring and controlling external sensors and devices and dedicated serial ports (two RS-232 ports).
Solution Providers (SPs) must create a custom power supply for their particular application.
Figure 1: ST6002
The ST6002 is suitable for both industrial and fixed applications, and it can work as a standalone data-
messaging device, with built-in I/O data collection and processing capabilities. Feature-rich software tools
make programming easy and shorten the design and testing time.
1. 1 Key Features and Benefits
The ST6002 has the following key features and benefits:
Designed to be incorporated into a custom solution
Built-in GNSS receiver to calculate position, speed, and heading that uses the satellite antenna
Broad operational temperature range
IsatData Pro message payload and latency capabilities
ST6002 Technical Manual
5
2 Compliance
The ST6002 is in the process to obtain the following certifications:
CE Mark
RED 2014/53/EU
Declaration of Conformity
Hereby, ORBCOMM declares that the radio equipment type ST6002 is in compliance with Directive
2014/53/EU.
The DOC (Declaration of Conformity) is either included in the packaging or can be found at the
following link:
The full text of the EU declaration of conformity is available from http://www2.orbcomm.com/eudoc.
Inmarsat Type Approval
ISED Canada
IC: 11881A-ST6002
ISED Canada Compliance Statements
This device contains licensed transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licensed RSS(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
L’émetteur/récepteur autorisée contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio
autorisée. L’exploitation est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
This equipment complies with ISED RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This module antenna should be installed and operated with minimum
distance 20 cm (7.9 inches) between the radiator and any part of your body.
Pour se conformer aux exigences de conformité ISED RSS-102 RF exposition, une distance de
séparation d'au moins 20 cm doit être maintenue entre l'antenne de cet appareil et toutes les
personnes.
FCC Part 25
FCC ID: XGS-ST6002
CFR Title 47: Telecommunication, Part 25 - Satellite Communications, Sub-part C - Technical
Standards
OET 65 - Radiation Safety
ST6002 Technical Manual
6
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation. Please note that changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter. In order to avoid the possibility of exceeding the FCC
radio frequency exposure limits, this equipment should be installed and operated with
minimum distance 20 cm (7.9 inches) between the antenna and your body during normal
operation. Users must follow the specific operating instructions for satisfying RF
exposure compliance.
RoHS
Restriction of Hazardous Substances (RoHS)
ST6002 Technical Manual
7
3 Satellite Messaging System Overview
IsatData Pro is a global, low data rate, two-way messaging service, optimized for machine-to-machine
communications. It offers fully-acknowledged transactions of varying size, with near real-time delivery.
The service is ideal for applications requiring relatively low amount of data such as form transfer, text
messaging, periodic reports and being suitable for event-driven data. Typical applications include vessel
and fleet management and security, remote monitoring, telematics and SCADA.
The network provides the following key features:
Up to 6,400 bytes from-mobile messages
Up to 10,000 bytes to-mobile messages
Broadcast and multicast capabilities
Store-and-forward message processing
IsatData Pro is an Inmarsat service delivered exclusively by ORBCOMM through the Inmarsat network.
ORBCOMM provides the service, either directly or through Distribution Partners, to Solution Providers
(SP) responsible for value-add application development and commercial fulfillment for end users of the
technology.
The key system elements to deliver the services are shown in Figure 2:
Figure 2: IsatData Pro Network
Application servers exchange data with the gateway to access the IsatData Pro service and
process the data to deliver it as meaningful business information to end users.
Gateway provides a web-service interface to application servers via the Internet and manages
administrative and billing aspects of the IsatData Pro service.
Land Earth Stations provide connection to the satellites in each region.
Inmarsat satellites provide global service coverage.
Terminals installed on remote assets send and receive messages using the Inmarsat satellites and
interface with devices or personal deployed in the field.
ST6002 Technical Manual
8
4 Summary of Specifications
Item
Feature
Model/Part number
ST6002
Modulation
OQPSK
Operation Frequency (MHz)
Rx: 1525.01559.0 MHz, Ext band: 15181525 MHz
Tx: 1626.51660.5 MHz, Ext band: 1668.01675.0 MHz
Maximum receiver input
10 dBm
Maximum transmitter output (EIRP)
7 dBW
Antenna elevation angle (fig. 5)
0 to 90°
Maximum transmit antenna gain
3.7 dBi (1626.51660.5 MHz), 3.9 dBi (16681675 MHz)
Polarization
RHCP
Electrical input voltage
VAUX: 3.5 VDC (Min)
VIN: 5.8 VDC ±3%
Power consumption @ 5.9V & 25°C
IDP receive: 125 mA
GPS/Glonass/Beidou/Galileo Receive: 40 mA
Transmit: 1.2 A
Interfaces (fig. 3,4)
4x Analog/Digital input/ digital output
2x Serial ports (TTL level)
Environmental
Operating Temperature: -40°C to +85°C
Vibration: SAE J1455 (Sec 4.9.4.2 fig 6-8);
MIL-STD-810G (Sec 14.6)
Shock: MIL-STD-810G (Sec 516.6)
Altitude: SAEJ1455(Sec 4.9.3)
UV Exposure: 1334 hr exposure per ASTM G154
Accelerometer
3-axis accelerometer
Dimensions (fig 7.8)
7.0 × 10.0 × 2.0 cm
Weight
60 g
ST6002 Technical Manual
9
Figure 3: ST 60xx Connector and PIN location
Figure 4: Mating Connector
ST6002 Technical Manual
10
Figure 5: Onboard Antennas
Figure 6: Top View
ST6002 Technical Manual
11
Figure 7: Side View Dimensions (in.)
Figure 8: Bottom View Dimensions (in.)
ST6002 Technical Manual
12
5 Integration Guidelines
This section contains a number of guidelines to assist the Solution Provider (SP) in building their ST6002
enclosure. It must be recognized that this section provides guidelines only and each SP must use their
own discretion to finalize the integration approach that works for them.
5.1 Enclosure Design
The ST6002 is not designed for outdoor environments. Consequently, the ST6002 requires a robust
environmentally sealed enclosure that can house the ST6002.
The following guidelines are recommended for the enclosure design.
An IP67 rating or better for outdoor use.
Use enclosure materials that are transparent to L-Band (12 GHz) radio signals.
Two recommended enclosure materials are:
Xenoy® Resin 5220U. This plastic material offers good chemical and UV resistance and great
impact resistance even at low temperatures.
Lexan EXL 9330.
5.2. Ground plane requirements and antenna integration
There are some requirements for the integration of the ST6002 terminal into a customer design including
ground plane requirements and minimum air gap between the antennas and the enclosure. Please
contact your Account Manager for more details around this topic.
5.3 Labeling
The mobile ID on the ST6002 is the network identification number. It is recommended that the SP place a
copy of the mobile ID on the exterior of the enclosure housing the device. With the mobile ID on the
enclosure, installers can readily identify the network identification number.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Orbcomm ST6002 Manuel utilisateur

Catégorie
Antennes réseau
Taper
Manuel utilisateur

dans d''autres langues