FICHA TÉCNICA
TECHNICAL FILE
R03.001_22/09/2014
Prole made of aluminum to be installed as a corner protector to pro-
tect and decorate the edges of ceramic walls. Also useful to top off
skirting boards or medium height tiled walls. The bevel visible side inte-
grates with the tiling providing it with a ne and elegant nish. Available
in four different trendy nishes.
Novobisel
Material: Anodized/chromed aluminum
Lenght: 2,5 m.l. (8.2”)
Dimensions:
h: 10 mm
(3/8”)
a: 12.4 mm
(0,04”)
h: 12 mm
(1/2”)
a: 16,70 mm
(0,05”)
Packaging: 30 u/box
Finishes: Bright mirror
Brushed mirror
Matt silver
Chrome
Applications
Technical Features and tests
General Features
Alloy 6063 (L-3441/38-337)
Fire resistance M0 (UNE 23-727-90)
Abrasion resistance* Very good
Lightfastness* Excellent
Appearance and color* EN 12373-1
Page 1 of 3
Novobisel is a prole with several different applications. It can be installed as:
- Edge protector
- Finishing edge (countertops...)
- Medium height walls nishing
- Skirting top off
*Anodized aluminum
FICHA TÉCNICA
TECHNICAL FILE
R03.001_22/09/2014
Novobisel
Installation
Cleaning and maintenance
Page 2 of 3
Materials
1 2 3 4 5
Aluminum
As edge protector
As stair nosing or
countertop nish
Novobisel is a prole made by extrusion of aluminum. The anodizing nish improves the corrosion
resistance, mechanical resistance and appearance of proles. It has the quality seal Qualanod, which
guarantees the quality of the process and the resulting proles. This seal regulates several tests: ap-
pearance and color, thickness measurements, sealing and impregnation control, abrasion resistance,
lightfastness, acetic saline chamber and nitric acid immersion.
Aluminum has excellent chemical, physical and mechanical properties. It is lightweight, tough, ductile,
malleable and highly durable
1. Spread a big amount of thin-set mortar on the surface to be tiled.
2. Align the prole with the corner and press it to make the thin-set mortar pass through the holes of
the xing wing.
3. Place tiles on the xing wing and press them to get an optimal adhesion.
4. Continue tiling the wall.
5. Finally, clean the leftover material, remove the protective lm if necessary and let dry.
To see the video, capture this
image with your mobile phone
(QR code reader software is ne-
cessary) or click on it.
1. Spread a big amount of thin-set mortar on the riser
2. Tile the riser.
3. Then, spread a big amount of thin-set mortar on the tread and align the prole on its vertex (Do not
let overhang, the leverage may remove the step and the tiles). Then press it so the thin-set mortar pas-
ses through the holes of the anchoring wing
4. Place a tile on the tread, align it to the prole and press it to ensure a perfect adhesion. Continue
tiling.
5. Clean the leftover material, remove the protective lm if necessary and let dry
The proles should be cleaned periodically with a soft cloth. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry to remove excess moisture.
You can clean the anodized nishes, if dirtiness persists, with a suitable slightly abrasive cleaning pro-
ducts or with specic metal cleaners. The lacquered nishes are more delicate and must be cleaned
with neutral detergents using soft cloths with no abrasive particles that could damage the surface
treatment. You can obtain a polished nish in natural nishes by using specic metal cleaners such as
magic cotton or generic polishers.
TECHNICAL FILE
R03.001_22/09/2014
Technical Information
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
You can nd out more information about the technical features of Emac®’s products by downloading
their Technical File from www.emac.es
If you have any query, please contact our Technical Department in tecnico@emac.es
Novobisel
Indoors Outdoors Wall tiling Recyclable
Page 3 of 3
In all cases the steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric
and perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommen-
ded. Citric acid is not recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
-
1
-
2
-
3
dans d''autres langues
- English: Emac NBIS11038 User manual
Documents connexes
-
Emac NBIS0112 Guide d'installation
-
-
-
-
-
-
-
-
-