Motorola Talkabout T62 Blue/Black (2 штуки) Manuel utilisateur

Taper
Manuel utilisateur
B
Talkabout T62
OWNER’S MANUAL
en-US
it-IT
pt-PT ru-RU fi
-FI sv-SE tr-TR
hu-
HU nl-NL nb-NO pl-PL
da-DK de-DE es-ES fr-FR
uk
-UA
1
English
RF ENERGY EXPOSURE AND
PRODUCT SAFETY GUIDE FOR
PORTABLE TWO-WAY RADIOS
ATTENTION!
Before using this product, read the RF Energy Exposure and
Product Safety Guide that ships with the radio which
contains instructions for safe usage and RF energy
awareness and control for compliance with applicable
standards and regulation.
Package Contents
Personalization Stickers:
Stickers are provided in order to personalize and keep track
of radios. Use permanent marker for the blank stickers.
Frequency Chart
Note: *Only Channels 1 to 8 are available by default. Channels 9 to 16
need to be activated by user before they can be selected.
Channels 9 to 16 should only be used in countries where these
frequencies are allowed by government authorities.Channels 9 to
16 are not allowed in Russia.
Package Content
T62
Radio
2
Belt clip
2
Battery
2
Power Supply
1
Stickersheet(16pcs)
1
Owner’s manual
1
Ch. Freq. (MHz) Ch. Freq. (MHz) Ch. Freq. (MHz)
1 446.00625 7 446.08125 13 446.15625
2 446.01875 8 446.09375 14 446.16875
3 446.03125 9 446.10625 15 446.18125
4 446.04375 10 446.11875 16 446.19375
5 446.05625 11 446.13125
6 446.06875 12 446.14375
2
English
Features and Specifications
8 PMR Channels. User expandable to 16 Channels in
countries where allowed by government authorities.
121 Sub-Codes (38 CTCSS Codes & 83 DCS codes)
Up to 8 km Range*
iVOX/VOX
Easy Pairing
20 Selectable Call Tone Alerts
Backlit LCD Display
Roger Tone
Micro USB Connector for charging
Battery Level Meter
Channel Monitor
Channel Scan
Dual Channel Monitor
Keypad Lock
Auto Squelch Control
Auto Repeat (Scrolling)
Battery Low Alert
Keypad Tone (On/Off)
Power Source: NiMH battery Pack/3 x AA Alkaline
batteries
Battery Life: 16 Hours (under typical use conditions)
Note: *Range may vary depending on environmental and/or
topographical conditions.
3
English
Radio Control Buttons and Display
Power
Note: *Only Channels 1 to 8 are available by default. Channels 9
to 16 need to be activated by user before they can be
selected.
Channels 9 to 16 should only be used in countries where
these frequencies are allowed by government authorities.
Channels 9 to 16 are not allowed in Russia.
1. Channel [1–8/* 1–16]
2. Call Tone [Off, 1–20]
3. Roger Tone [On/Off]
4. Dual Channel Monitor
5. Keypad Tone [On/Off]
6. Easy Pairing
7. Speaker Volume [0–7]
8. Battery Indicator [3
Battery Levels]
9. Status [Transmit]
10. Status [Receive]
11. Scan Indicator
12. Keypad Lock
13. iVOX [Off, L1, L2, L3]
VOX [Off, L1, L2, L3]
14. Sub-Code [0–121]
2
3
4
5
1
6
7
8
9
11
13
10
12
14
Menu
Lock
Screen
Speaker
Antenna
Micro-USB
Charging Port
Easy Pairing Button
Microphone
Call Tone
Scroll
Scan/Monitor
PTT Button
Accessory Port
Space for Personalization
Stickers
4
English
Installing the Batteries
Each radio can either use a NiMH rechargeable battery pack
or three units of AA Alkaline Battery, and beeps when the
batteries are low.
1. Make sure your radio is turned off.
2. To remove the battery compartment door, press the tab at
the bottom of the compartment door.
3. For NiMH battery pack, insert the battery pack with the
and signs facing you. Observe polarity.
For AA Alkaline batteries, insert the batteries. Observe
polarity.
4. Close the battery compartment door.
Radio Battery Meter
The number of bars (0–3) on the Radio Battery icon shown
indicates the charge remaining in the battery. When the radio
battery meter shows one segment left, the radio chirps
periodically or after releasing the PTT button (Low Battery
Alert).
Battery Capacity Maintenance
1. Charge the NiMH batteries once every three months
when not in use.
2. For storage purposes, remove the battery from the radio.
3. Store the NiMH batteries in a temperature between -20
°C to 35 °C and in low humidity. Avoid damp conditions
and corrosive materials.
Using the Micro-USB Charger
The micro-USB charger allows you to charge your NiMH
battery pack.
1. Power off your radio before start charging.
2. Plug the micro-USB cable into the micro-USB charging
port on your radio. Connect the other end of the micro-
USB charger to wall power outlet.
3. An empty battery will be fully charged in 8 hours.
4. The battery meter bar will scroll when the battery is
charging.
Note: It is recommended to power off your radio while charging.
However, if power is on while charging, you may not be able to
transmit a message if the battery is completely empty. Allow time
for the battery to charge to one bar before attempting to transmit a
message.
When moving between hot and cold temperatures, do not charge
the NiMH battery pack until the temperature acclimates (usually
about 20 minutes).
For optimal battery life, remove the radio from the charger within
16 hours. Do not store the radio while connected to the charger.
Turning your Radio On and Off
Press and hold the Power button to turn the radio on or off.
1. In the on position, the radio chirps and briefly shows all
feature icons available on the radio.
2. The display screen then shows the current channel, code,
and all features that are enabled.
Setting the Volume
From Standby Mode, press on either or to show the
current value. Press or again to adjust the volume
setting.
1. Press to increase the speaker volume.
2. Press to decrease the speaker volume.
Do not hold the radio close to your ear. If the volume is set to
an uncomfortable level, it could hurt your ear. Adjust ‘0’ to
mute the speaker.
5
English
Talking and Listening
All radios in your group must be set to the same channel and
Sub-Code in order to communicate.
1. Hold your radio 2–3 cm from your mouth.
2. Press and hold the PTT button while speaking. The
Transmit icon appears on the display.
3. Release the PTT button. You can now receive incoming
calls. When you do, the Receive icon appears on the
display.
For maximum clarity, hold the radio 2 to 3 cm away and
avoid covering the microphone while talking.
Talk Range
Your radio is designed to maximize performance and
improve transmission range. Ensure the radios are at least 5
feet apart when in used.
Monitor Button
Pressing and holding Scan/Monitor for 3 seconds to enter
Monitor mode and listen for weak signals on the current
channel. You can also listen to the volume level of the radio
when you are not receiving. This allows you to adjust the
volume, if necessary.
Push-to-Talk Time-out Timer
To prevent accidental transmissions and save battery life,
the radio emits a continuous warning tone and stops
transmitting if you press the PTT button for 60 seconds
continuously.
Menu Options
Note: *Only Channels 1 to 8 are available by default. Channels 9 to 16
need to be activated by user before they can be selected.
Channels 9 to 16 should only be used in countries where these
frequencies are allowed by government authorities. Channels 9 to
16 are not allowed in Russia.
Menu Key
Menu Key
Menu Key
Menu Key
Menu Key
Menu Key
Menu Key
Menu Key
Menu Key
Two Way Mode
Channel (1-8 / *1-16)
Sub-Code (0-121)
Call Tone (Off, 1-20)
Keypad Tones (On/Off)
Roger Tones (On/Off)
Dual Channel Monitor Channel (1-8 / *1-16)
Dual Channel Monitor Sub-Code (0-121)
Internal Voice Operated Transmission/
Voice Operated Transmission
(iVOX,VOX) (Off, L1,L2,L3)
6
English
Selecting the Channel
The channel is the frequency of the radio uses to transmit.
1. Press Menu until the channel number starts to flash.
2. Press or to change the channel. Long press on
these keys allows you to scroll through the channels
rapidly to browse the codes.
3. Press PTT button to exit menu or Menu to continue set
up.
Note: Your radio has eight channels by default. In countries where 16
channels are allowed, you can activate Channels 9 to 16 with the
following steps:
1. Press Menu until the channel number starts to flash.
2. Press and hold down and simultaneously for 3 seconds
until you hear a beep and “16 CH” is displayed briefly.
Note: *Only Channels 1 to 8 are available by default. Channels 9 to 16
need to be activated by user before they can be selected.
Channels 9 to 16 should only be used in countries where these
frequencies are allowed by government authorities.Channels 9 to
16 are not allowed in Russia.
Selecting the Sub-Code
Sub-Codes help minimize interference by blocking
transmissions from unknown sources. Your radio has 121
Sub-Codes.
To set the code for a channel:
1. Press Menu until the code starts to flash.
2. Press or to select the code. You can hold down the
button to speed up scrolling through the codes.
3. Press the PTT button to exit menu or Menu to continue
set up.
Setting and Transmitting Call Tones
Your radio can transmit different call tones to other radios
in your group so you can alert them that you want to talk.
Your radio has 20 call tones for you to choose from.
To set a call tone:
1. Press Menu until the Call Tone icon appears. The
current call tone setting will flash.
2. Press or to change and listen to the call tone.
3. Press the PTT button to exit menu or Menu to continue
set up.
In order to transmit your call tone to other radios, set up the
same channel and Sub-Code on your radio and press Call
Ton e.
Easy Pairing
The Easy Pairing feature allows a group of radio users to
program all their radios to the same Channel and Sub-Code
settings quickly and simultaneously. Any one radio within the
group can be designated as the “Leader’s radio” and have
it’s Channel and Sub-Code settings transmitted to and
copied by all the other radios in the group (Members’ radios).
1. Pick any one of the radios as the “Leader’s radio”. On this
radio, program the Channel and Sub-Code to the desired
settings.(See “Selecting the Channel” and “Selecting the
Sub-Code” sections in this user manual)
2. To copy the channel and Sub-Code combination to all the
other “Members’ radios”, press and hold the button on
the Members’ radios until you hear a beep. Release the
button after the beep, and wait for the transmission from
the Leader’s radio.
7
English
Note:
You will see the icon blinking on the display. This confirms that
the radio is in Easy Pairing mode waiting to receive the Channel
and Sub-Code settings from the Leader’s radio. All Members’
radios will remain in this mode for 3 minutes.
A group with many radios should have all users take this step at
the same time, so all radios can be programmed in one go.
3. On the Leader’s radio, press and hold down the button
until you hear a double beep.
Note:
At the double beep, this radio’s Channel and Sub-Code settings
will be transmitted, which will be received and copied by all the
other (Members’) radios.
• The Leader’s radio must make this transmission when all the
Members’ radios are still in the Easy Pairing mode, otherwise the
transmission will not be picked up.
• On the Leader’s radio, user must remember not to release the
button on the first (single) beep, otherwise this radio will become
another Member’s radio. If that happens, you can press PTT to
escape, and retry the steps described in #3 again.
• If the Leader’s radio is set to a channel between 9 and 16, please
ensure that all Members’ radios have channels 9 to 16 activated.
• When a Member’s radio with only eight Channels is being Easy-
Paired by a Leader’s radio on Channel 9 or above, Easy-Pairing
will fail, indicated by three short beeps, and “Err” is displayed briefly.
Internal Voice Operated Transmission/
Voice Operated Transmission ( / )
Transmission is initiated by speaking into the microphone of
the radio/audio accessory instead of pushing the PTT button.
1. Press Menu until the icon appears on the display.
When audio accessory is connected, the icon will
be shown. The current setting (Off, L1–L3) will flash.
2. Press or to select the sensitivity level.
3. Press the PTT button to exit menu or Menu to continue
set up.
Note: When using iVOX/VOX, there will be a short delay.
Dual Channel Monitor
Enables you to scan the current channel and another
channel alternately.
To set another channel and start Dual Channel Monitor:
1. Press Menu until the Dual Channel Monitor icon
appears. The Dual Channel Monitor icon will flash.
2. Press or to select the channel then press Menu.
3. Press or to select the Sub-Code.
4. Press the PTT button or wait until time out to activate
Dual Channel Monitor. The screen will alternate between
home channel and Dual Channel Monitor channel.
5. To end Dual Channel Monitor, press Menu.
Note: If you set the same channel and Sub-Code as the current channel,
Dual Channel Monitor does not work.
Keypad Tones
You may enable or disable the keypad tones. You will hear
the key tone each time a button is pushed.
1. Press Menu until the Keypad Tone icon appears.
The current setting on/off will flash.
2. Press either or to turn on/off.
3. Press the PTT button to confirm or Menu to continue
set up.
L3 = High Sensitivity for quiet environments
L2 = Medium Sensitivity for most environments
L1 = Low Sensitivity for noisy environments
8
English
Roger Tone
You can set your radio to transmit a unique tone when you
finish transmitting. It is like saying “Roger” or “Over” to let
others know you have finished talking.
1. Press Menu until the Roger Tone icon appears. The
current setting on/off flashes.
2. Press or to turn on or off.
3. Press the PTT button to set or Menu to continue set
up.
Keypad Lock
To avoid accidentally changing your radio settings:
1. Press and hold Key Lock until the Key Lock Indicator
icon displays.
2. You can turn the radio on and off, adjust the volume,
receive, transmit, send a call tone, send Emergency
Alert, and monitor channels when in the lock mode. All
other functions remain locked.
3. Press Key Lock and hold until the Key Lock Indicator
is no longer displayed to unlock the radio.
Scanning
Use the scan function to do the following:
Search all channels for transmissions from unknown
parties.
Find someone in your group who has accidentally
changed channels or
To quickly find unused channels for your own use.
There is a priority feature and two modes of scanning
(basic and advanced) to make your search more
effective.
The “Basic Scan” mode uses the channel and code
combinations for each of the channel as you have set
them (or with the default code value of 1).
The “Advance Scan” mode will scan all channels for any
and all codes; detect any code in use and use that code
value temporary for that channel.
Priority is given to the “Home Channel” (i.e. the channel
and Sub-Code your radio is set to when you start the
scan). This means the initial channel (and code settings)
is scanned more often than the other seven channels and
your radio will respond quickly to any activity occurring on
the home channel as a priority.
To start Basic Scanning:
1. Press the Scan/Monitor button briefly. The Scan
icon will appear in the display and the radio will begin to
scroll through the channel and code combinations.
2. When the radio detects channel activities matching the
channel and Sub-Code combination, the radio will stop
scrolling and you can hear the transmission.
3. Press the PTT button within 5 seconds after the end of
the transmission to respond and talk to the person
transmitting.
4. The radio will resume scrolling through the channels
5 seconds after the end of any received activity.
5. Press the Scan/Monitor button briefly to stop scanning.
To start Advanced Scanning:
1. Set home channel’s Sub-Code to “zero” or off.
2. Press the Scan/Monitor button briefly. The Scan
icon will appear in the display and the radio will begin to
9
English
scroll through the channels. No Sub-Codes will filter what
is heard.
3. When the radio detects channel activities with any code
(or no code), it stops scrolling and you can hear the
transmission. Any Sub-Code that may be use by other
party will be detected and displayed.
4. To respond and talk to the person transmitting, press the
PTT button within 5 seconds after the end of the
transmission.
5. The radio will resume scrolling through the channels 5
seconds after the end of any received activity.
6. Press the Scan/Monitor button briefly to stop scanning.
Note:
1. The transmission will be on the “Home Channel” if you press the PTT
button while the radio is scrolling through inactive channels. You may
press the Scan/Monitor button to stop scanning at any time.
2. You may immediately resume the scan by briefly pressing or if
the radio stops on an undesired transmission.
3. You may temporarily remove that channel from the scan list by
pressing and holding or for 3 seconds if the radio stops
repeatedly on an undesired transmission. You may remove more
than one channel this way.
4. Turn the radio off and then turn back on, or exit and re-enter the
scanning mode by pressing Scan/Monitor to restore and remove
channel(s) to the scan list.
5. You cannot remove the “Home Channel” from the scan list.
6. In the Advanced Scan, the detected code will only be used for one
transmission. You must take note of that code, exit scan, and set the
detected code on that channel to permanently use.
Warranty Information
The authorized Motorola Solutions dealer or retailer where
you purchased your Motorola Solutions two-way radio and/or
original accessories will honour a warranty claim and/or
provide warranty service.
Please return your radio to your dealer or retailer to claim
your warranty service. Do not return your radio to Motorola
Solutions.
In order to be eligible to receive warranty service, you must
present your receipt of purchase or a comparable substitute
proof of purchase bearing the date of purchase. The two-
way radio should also clearly display the serial number. The
warranty will not apply if the type or serial numbers on the
product have been altered, deleted, removed, or made
illegible.
10
English
What Is Not Covered By The Warranty
Defects or damage resulting from use of the Product in
other than its normal and customary manner or by not
following the instructions in this user manual.
Defects or damage from misuse, accident or neglect.
Defects of damage from improper testing, operation,
maintenance, adjustment, or any alteration or
modification of any kind.
Breakage or damage to aerials unless caused directly by
defects in material or workmanship.
Products disassembled or repaired in such a manner as
to adversely affect performance or prevent adequate
inspection and testing to verify any warranty claim.
Defects or damage due to range.
Defects or damage due to moisture, liquid or spills.
All plastic surfaces and all other externally exposed parts
that are scratched or damaged due to normal use.
Products rented on a temporary basis.
Periodic maintenance and repair or replacement of parts
due to normal usage, wear and tear.
Copyright Information
The Motorola Solutions products described in this manual
may include copyrighted Motorola Solutions programs,
stored semiconductor memories or other media. Laws in the
United States and other countries preserve for Motorola
Solutions, certain exclusive rights for copyrighted computer
programs, including the exclusive right to copy or reproduce
in any form, the copyrighted Motorola Solutions programs.
Accordingly, any copyrighted Motorola Solutions computer
programs contained in the Motorola Solutions products
described in this manual may not be copied or reproduced in
any manner without express written permission of Motorola
Solutions. Furthermore, the purchase of Motorola Solutions
products shall not be deemed to grant either directly or by
implication, estoppel, or otherwise, any license under the
copyrights, patents or patent applications of Motorola
Solutions, except for the normal non-exclusive royalty free
license to use that arises by operation of law in the sale of a
products.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the
Stylized M logo are trademarks or registered trademarks of
Motorola Trademark Holdings, LLC and are used under
license. All other trademarks are the property of their
respective owners.
© 2017 Motorola Solutions, Inc. All rights reserved.
11
Dansk
VEJLEDNING OM RF-
ENERGIEKSPONERING OG
PRODUKTSIKKERHED TIL BÆRBARE
TOVEJSRADIOER
OBS!
Inden brug af radioen skal du læse vejledningen om
RF-energieksponering og sikkerhed, der leveres sammen
med radioen. Vejledningen indeholder instruktioner
omkring sikker brug, opmærksomhed omkring forekomst
af RF-energi og kontrol af overholdelse af gældende
standarder og bekendtgørelser.
Pakkens indhold
Etiketter til personlig tilpasning:
Etiketter leveres med henblik på personlig tilpasning og for
at holde styr på radioerne. Brug permanent markør til de
tomme etiketter.
Frekvenstabel
Bemærk: *Kun Kanal 1 til 8 er tilgængelige som standard. Kanal 9 til 16
skal aktiveres af brugeren, før de kan vælges. Kanal 9 til 16 må
kun bruges i lande, hvor myndighederne tillader brug af disse
frekvenser. Kanalerne 9 til 16 må ikke anvendes i Rusland.
Pakkens indhold
T62
Radio
2
Bælteclips
2
Batteri
2
Strømforsyning
1
Ark med etiketter (16 stk.)
1
Brugervejledning
1
K. Frekv. (MHz) K. Frekv. (MHz) K. Frekv. (MHz)
1 446,00625 7 446,08125 13 446,15625
2 446,01875 8 446,09375 14 446,16875
3 446,03125 9 446,10625 15 446,18125
4 446,04375 10 446,11875 16 446,19375
5 446,05625 11 446,13125
6 446,06875 12 446,14375
12
Dansk
Funktioner og specifikationer
8 PMR-kanaler. Kan udvides af brugeren til 16 kanaler
i lande, hvor myndighederne tillader dette.
121 delkoder (38 CTCSS-koder og 83 DCS-koder)
Rækkevidde på op til 8 km*
iVOX/VOX
Nem parring
20 opkaldstonealarmer, som brugeren vælger
Baggrundsbelyst LCD-skærm
Modtaget-tone
Micro-USB-stik til opladning
Batteriniveaumåler
Kanalskærm
Kanalscanning
Overvågning af to kanaler
•Tastelås
Automatisk squelch-styring
Automatisk gentagelse (rulning)
Advarsel om lavt batteriniveau
Tastaturtone (Til/Fra)
Strømkilde: NiMH-batteripakke / 3 x AA-alkalinebatterier
Batteritid: 16 timer (under normale brugsforhold)
Bemærk: *Intervallet kan variere afhængigt af miljømæssige og/eller
topografiske forhold.
13
Dansk
Radioens kontrolknapper og display
Tænd/
sluk
Bemærk: *Kun Kanal 1 til 8 er tilgængelige som standard. Kanal
9 til 16 skal aktiveres af brugeren, før de kan vælges.
Kanal 9 til 16 må kun bruges i lande, hvor
myndighederne tillader brug af disse frekvenser. Kanal
9 til 16 må ikke anvendes i Rusland.
1. Kanal [1-8/ * 1-16]
2. Opkaldstone [Fra, 1-20]
3. Modtaget-tone [Til/Fra]
4. Overvågning af to
kanaler
5. Tastaturtone [Til/Fra]
6. Nem parring
7. Lydstyrke for højttaler
[0- 7]
8. Batteriindikator [3
batteriniveauer]
9. Status [Send]
10. Status [Modtag]
11. Indikator for scanning
12. Tastelås
13. iVOX [Fra, L1, L2, L3];
VOX [L1, L2, L3]
14. Delkode [0- 121]
2
3
4
5
1
6
7
8
9
11
13
10
12
14
Menu
Lås
Skærm
Højttaler
Antenne
Micro-USB
Opladerport
Knap til nem parring
Mikrofon
Opkaldstone
Rul
Scan/Monitor
PTT-knap
Adgangsport
Plads til etiketter til per-
sonlig tilpasning
14
Dansk
Installer batterierne
Hver radio kan enten bruge en genopladelig NiMH-
batteripakke eller tre AA-alkalinebatterienheder og bipper,
når batterierne er ved at løbe tør for strøm.
1. Sørg for, at radioen er slukket.
2. Du kan fjerne dækslet til batterirummet ved at trykke på
tappen nederst på dækslet.
3. For NiMH-batteripakke skal du indsætte batteripakken
med symbolerne og mod dig selv. Vær opmærksom
på polariteten.
For AA-alkalinebatterier skal du sætte batterierne ind.
Vær opmærksom på polariteten.
4. Luk dækslet til batterirummet.
Radioens batterimåler
Antallet af viste søjler (0 – 3) på radiobatteriikonet angiver
den resterende opladning i batteriet. Når radioens
batterimåler har ét segment tilbage, bipper radioen
regelmæssigt, eller når PTT-knappen slippes (advarsel om
lavt batteriniveau).
Vedligeholdelse af batterikapacitet
1. Oplad NiMH-batterierne én gang hver tredje måned,
når de ikke er i brug.
2. Ved opbevaring skal du tage batteriet ud af radioen.
3. Opbevar NiMH-batterierne ved en temperatur på mellem
-20 °C og 35 °C og ved lav luftfugtighed. Undgå fugtige
forhold og ætsende stoffer.
Brug af micro-USB-opladeren
Micro-USB-opladeren gør det muligt for dig at oplade NiMH-
batteripakken.
1. Sluk for radioen, før du starter opladningen.
2. Indsæt micro-USB-kablet i micro-USB-ladeporten på
radioen. Slut den anden ende af micro-USB-opladeren til
en stikkontakt.
3. Et tomt batteri er fuldt opladet efter 8 timer.
4. Bjælken på batterimåleren ruller, mens batteriet oplades.
Bemærk: Det anbefales at slukke for radioen under opladning. Hvis
radioen er tændt under opladningen, kan du muligvis ikke
transmittere en meddelelse, hvis batteriet er løbet helt tør for
strøm. Lad batteriet blive opladet til én bjælke, inden du
forsøger at transmittere en meddelelse.
Når der skiftes mellem varme og kolde temperaturer, må
NiMH-batteriet ikke oplades, før temperaturen akklimatiseres
(normalt ca. 20 minutter).
For at opnå den optimale batteritid skal radioen fjernes fra
opladeren inden for 16 timer. Opbevar ikke radioen, mens den
er tilsluttet opladeren.
Sådan tænder og slukker du radioen
Tryk på Tænd/sluk-knappen, og hold den nede for at tænde
eller slukke radioen.
1. Når radioen er tændt, kvidrer den og viser kort alle
funktionsikoner, der findes på radioen.
2. Visningsskærmen viser derefter den aktuelle kanal, kode
og alle funktioner, der er aktiveret.
Indstilling af lydstyrken
Når radioen er i tilstanden Standby, skal du trykke på enten
eller for at vise den aktuelle kanal. Tryk igen eller
for at indstille lydstyrken.
1. Tryk på for at øge lydstyrken for højttaleren.
2. Tryk på for at mindske lydstyrken for højttaleren.
Undgå at holde radioen tæt ved øret. Hvis lydstyrken er
indstillet til et ubehageligt niveau, kan det skade dit øre.
Indstil '0' for at sætte højttaleren på lydløs.
15
Dansk
Tale og lytte
Alle radioer i gruppen skal være indstillet til samme kanal og
delkode for at kunne kommunikere.
1. Hold radioen 2-3 cm fra munden.
2. Tryk på tasten PTT, og hold den nede, mens du taler.
Ikonet for transmission vises på skærmen.
3. Slip knappen PTT. Du kan nu modtage indgående
opkald. Når du gør det, vises ikonet for Modtag
skærmen.
For at få den bedste lydkvalitet skal du holde radioen 2 til 3 cm
væk og undgå at dække mikrofonen, mens du taler.
Rækkevidde for tale
Radioen er designet til at maksimere ydeevnen og forbedre
transmissionsrækkevidden. Sørg for, at radioer er mindst
5 meter fra hinanden, når de anvendes.
Knappen Monitor
Tryk på og hold Scan/Monitor i 3 sekunder for at gå i
monitortilstand og lytte efter svage signaler på den aktuelle
kanal. Du kan også lytte til radioens lydstyrke, når du ikke
modtager. Dette giver dig mulighed for at justere lydstyrken,
hvis det er nødvendigt.
Push-to-Talk Time-out timer
For at forhindre utilsigtede transmissioner og for at spare
batteritid, udsender radioen en konstant advarselstone
og standser transmissionen, hvis du trykker på knappen PTT
konstant i 60 sekunder.
Menuindstillinger
Bemærk: *Kun Kanal 1 til 8 er tilgængelige som standard. Kanal 9 til 16
skal aktiveres af brugeren, før de kan vælges.
Kanal 9 til 16 må kun bruges i lande, hvor myndighederne
tillader brug af disse frekvenser. Kanal 9 til 16 må ikke
anvendes i Rusland.
Menutast
Menutast
Menutast
Menutast
Menutast
Menutast
Menutast
Menutast
Menutast
Tovejstilstand
Kanal (1-8 / *1-16)
Delkode (0-121)
Opkaldstone (Fra, 1-20)
Tastaturtoner (Til/Fra)
Modtaget-toner (Til/Fra)
Kanal til overvågning af to kanaler (1-8 / *1-16)
Delkode for overvågning af to kanaler (0-121)
Intern stemmestyret transmission/
Stemmestyret transmission
(iVOX,VOX) (Fra, L1, L2, L3)
16
Dansk
Sådan vælger du kanalen
Kanalen er den frekvens, som radioen bruger til at
transmittere.
1. Tryk på Menu, indtil kanalnummeret begynder at blinke.
2. Tryk på eller for at skifte kanal. Et langt tryk på disse
taster giver dig mulighed for hurtigt at rulle igennem
kanalerne for at gennemse koderne.
3. Tryk på knappen PTT for at forlade menuen eller på
Menu for at forsætte opsætningen.
Bemærk: Radioen har som standard otte kanaler. I lande, hvor 16
kanaler er tilladt, kan du aktivere kanal 9 til 16 ved at udføre
følgende trin:
1. Tryk på Menu, indtil kanalnummeret begynder at blinke.
2. Tryk samtidigt på og , og hold dem nede i 3 sekunder,
indtil du hører et bip, og "16 CH" vises kortvarigt.
Bemærk: *Kun Kanal 1 til 8 er tilgængelige som standard. Kanal 9 til 16
skal aktiveres af brugeren, før de kan vælges. Kanal 9 til 16 må
kun bruges i lande, hvor myndighederne tillader brug af disse
frekvenser. Kanalerne 9 til 16 må ikke anvendes i Rusland.
Valg af delkoden
Delkoder hjælper med at minimere interferens ved at blokere
transmissioner fra ukendte kilder. Radioen har 121 delkoder.
Sådan angiver du koden for en kanal:
1. Tryk på Menu, indtil koden begynder at blinke.
2. Tryk på eller for at vælge koden. Du kan trykke på
knappen og holde den nede for at rulle hurtigere gennem
koderne.
3. Tryk på knappen PTT for at forlade menuen eller på
Menu for at fortsætte opsætningen.
Indstilling og transmission af
opkaldstoner
Radioen kan sende forskellige opkaldstoner til andre radioer
i gruppen, så du kan give dem besked om, at du vil tale.
Radioen har 20 opkaldstoner, som du kan vælge imellem.
Sådan indstiller du en opkaldstone:
1. Tryk på Menu, indtil ikonet for opkaldstone vises.
Den aktuelle opkaldstoneindstilling blinker.
2. Tryk på eller for at skifte og høre opkaldstonen.
3. Tryk på knappen PTT for at forlade menuen eller på
Menu for at fortsætte opsætningen.
For at transmittere dit opkald til andre radioer skal du
indstille den samme kanal og delkode på radioen og trykke
Opkaldstone.
Nem parring
Funktionen Nem parring gør det muligt for en gruppe
radiobrugere at programmere alle deres radioer til de
samme kanal- og delkodeindstillinger hurtigt og samtidigt.
Enhver radio i gruppen kan angives som "Lederens radio" og
få sine kanal- og delkodeindstillinger overført til og kopieret
på alle de andre radioer i gruppen (Medlemmernes radioer).
1. Vælg en hvilken som helst radio som "Lederens radio".
På denne radio skal du programmere kanalen og
delkoderne til de ønskede indstillinger (se afsnittene
"Sådan vælger du kanalen" og "Valg af delkoden" i denne
brugermanual).
2. For at kopiere kombinationen af kanal og delkode til alle
de øvrige "Medlemmernes radioer" skal du trykke på
og holde knappen nede på medlemmernes radioer,
til du hører et bip. Slip knappen efter bippet, og vent på
transmissionen fra lederens radio.
17
Dansk
Bemærk:
• Du vil se ikonet blinke på displayet. Det bekræfter, at radioen er
i nem parringstilstand og venter på at modtage indstillingerne for
kanal og delkode fra lederens radio. Alle medlemmernes radioer
forbliver i denne tilstand i 3 minutter.
• I en gruppe med mange radioer bør alle brugere udføre dette trin
samtidigt, så alle radioerne kan programmeres på én gang.
3. På lederens radio skal du trykke på knappen og holde
den nede, indtil du hører et dobbelt bip.
Bemærk:
• Ved det dobbelte bip bliver denne radios kanal- og
delkodeindstillinger overført, så de modtages og kopieres af alle
de andre (medlemmers) radioer.
• Lederens radio skal foretage denne transmission, mens alle
medlemmernes radioer stadig er i nem parringstilstand, ellers
bliver transmissionen ikke modtaget.
• På lederens radio må brugeren ikke slippe knappen efter det
første (enkelte) bip, ellers bliver denne radio endnu en
medlemsradio. Hvis det sker, kan du trykke på PTT for at afslutte
og forsøge at udføre de trin, der er beskrevet i nr. 3, igen.
• Hvis lederens radio er indstillet til en kanal mellem 9 og 16, skal
du sikre dig, at alle medlemmernes radioer har aktiveret
kanalerne 9 til 16.
• Når en medlemsradio med kun 8 kanaler nemt parres af en leders
radio på kanal 9 eller derover, mislykkes Nem parring. Dette
angives med tre korte bip, og "Err" vises kortvarigt.
Intern stemmestyret transmission/
Stemmestyret transmission ( / )
Transmission startes ved at tale ind i mikrofonen på radioen/
lydtilbehøret i stedet for at trykke på knappen PTT.
1. Tryk på Menu, indtil ikonet vises på displayet.
Når lydtilbehør er tilsluttet, vises ikonet . Den
aktuelle indstilling (Fra, L1–L3) blinker.
2. Tryk på eller for at vælge følsomhedsniveau.
3. Tryk på knappen PTT for at forlade menuen eller
Menu for at fortsætte opsætningen.
Bemærk: Når du bruger iVOX/VOX, er der en kort forsinkelse.
Overvågning af to kanaler
Giver dig mulighed for at scanne den aktuelle kanal og en
anden kanal skiftevis.
Sådan indstilles en anden kanal, og overvågning af to
kanaler startes:
1. Tryk på Menu, indtil ikonet for overvågning af to
kanaler vises. Ikonet for overvågning af to kanaler
blinker.
2. Tryk på eller for at vælge kanalen, og tryk derefter
Menu.
3. Tryk på eller for at vælge delkoden.
4. Tryk på PTT-knappen, eller vent indtil timeout for at
aktivere overvågning af to kanaler. Skærmen vil skifte
mellem startkanalen og kanalen til overvågning af to
kanaler.
5. Du kan afslutte overvågning af to kanaler ved at trykke
Menu.
Bemærk: Hvis du indstiller den samme kanal og delkode som den
aktuelle kanal, vil overvågning at to kanaler ikke fungere.
L3 = høj følsomhed til stille omgivelser
L2 = medium følsomhed til de fleste omgivelser
L1 = lav følsomhed til støjende omgivelser
18
Dansk
Tastaturtoner
Du kan aktivere eller deaktivere tastaturtonerne. Du hører
tastetonen, hver gang du trykker på en knap.
1. Tryk på Menu, indtil ikonet for tastaturtone vises.
Den aktuelle indstilling Til/Fra blinker.
2. Tryk på enten eller for at slå Til/Fra.
3. Tryk på knappen PTT for at bekræfte eller Menu for at
fortsætte opsætningen.
Modtaget-tone
Du kan indstille radioen til at transmittere en unik tone, når
du er færdig med at transmittere. Det svarer til at sige
"Modtaget" eller "Skifter" for at lade andre vide, at du er
færdig med at tale.
1. Tryk på Menu, indtil ikonet for modtaget-tone vises.
Den aktuelle indstilling Til/Fra blinker.
2. Tryk på eller for at slå Til eller Fra.
3. Tryk på knappen PTT for at indstille eller på Menu for
at fortsætte opsætningen.
Tastelås
For at undgå utilsigtet ændring af radioens indstillinger:
1. Tryk på Tastelås, og hold den nede, indtil ikonet for
tastelåsindikator vises.
2. Du kan tænde og slukke radioen, justere lydstyrken,
modtage, transmittere, sende en opkaldstone, sende
nødalarm og overvåge kanaler i låst tilstand. Alle andre
funktioner forbliver låst.
3. Tryk på Tastelås, og hold den nede, indtil
tastelåsindikatoren ikke længere vises, for at låse radioen.
Scanning
Brug scanningsfunktionen til at gøre følgende:
Søg på alle kanaler efter transmissioner fra ukendte parter.
Find en person i gruppen, som er kommet til at skifte
kanal, eller
For hurtigt at finde ubrugte kanaler til eget brug.
Der er en prioriteringsfunktion og to indstillinger for
scanning (basis og avanceret), som kan gøre din
søgning mere effektiv.
Tilstanden "Basic Scan" bruger kanal- og
kodekombinationer for hver af de 8 kanaler, som du har
indstillet dem (eller med standardkodeværdien 1).
Tilstanden "Advanced Scan" vil altid scanne alle kanaler
for alle koder. Find en kode, der er i brug, og brug den
kodeværdi midlertidigt for den pågældende kanal.
"Home Channel" prioriteres (dvs. den kanal og delkode,
som radioen er indstillet til, når du starter scanningen).
Det betyder, at den første kanal (og kodeindstillinger)
scannes oftere end de andre syv kanaler, og radioen
vil som prioritet reagere hurtigt på enhver aktivitet,
der foregår på startkanalen.
Sådan startes basisscanningen:
1. Tryk kortvarigt på knappen Scan/Monitor. Ikonet for
scanning vises på skærmen, og radioen begynder at
rulle gennem kanal- og kodekombinationerne.
2. Når radioen registrerer kanalaktiviteter, der passer til
kombinationen af kanal og delkode, vil radioen holde op
med at rulle, og du kan høre transmissionen.
3. Tryk på knappen PTT inden for 5 sekunder efter
transmissionens afslutning for at svare og tale med den
person, der transmitterer.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184

Motorola Talkabout T62 Blue/Black (2 штуки) Manuel utilisateur

Taper
Manuel utilisateur