Motorola CP110 Manuel utilisateur

CP110 UHF and VHF Display Models / Modèles avec afficheur CP110 UHF et VHF

CP110

TM

Series / Série CP110

MC

Two-way Radios

Radios bidirectionnelles

User Guide

Guide de l’utilisateur

Motorola, the Stylized M Logo, and all other trademarks indicated as such herein are Trademarks of Motorola,

Motorola, le M Stylisé du Logo et toutes les autres marques déposées indiquées comme tel ci-dessus sont les Marques

déposées de Motorola, Compagnie juridiquement constituée aux États-Unis. Brevet & Marque déposée.

CONTENTS

English

1

CONTENTS

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Batteries and Chargers Safety

Information . . . . . . . . . . . . . . . . . . . . . . . . . .5

Operational Safety Guidelines. . . . . . . . . . . . .6

Introduction . . . . . . . . . . . . . . . . . . . . . . . . .7

Package Contents. . . . . . . . . . . . . . . . . . . . . .7

FCC Licensing Information . . . . . . . . . . . . .8

Interference Information . . . . . . . . . . . . . . . . .8

Radio Overview . . . . . . . . . . . . . . . . . . . . .10

Parts of the Radio . . . . . . . . . . . . . . . . . . . . .10

On/Off/Volume Knob. . . . . . . . . . . . . . . .11

Accessory Connector . . . . . . . . . . . . . . .11

Model Label . . . . . . . . . . . . . . . . . . . . . .11

Microphone . . . . . . . . . . . . . . . . . . . . . . .11

Antenna. . . . . . . . . . . . . . . . . . . . . . . . . .11

LED Indicator . . . . . . . . . . . . . . . . . . . . .11

Front Buttons . . . . . . . . . . . . . . . . . . . . .11

Side Buttons . . . . . . . . . . . . . . . . . . . . . .12

The Lithium-Ion (Li-Ion) Battery . . . . . . .12

Battery Features. . . . . . . . . . . . . . . . . . . . . . 14

About the Li-Ion Battery . . . . . . . . . . . . . 14

Battery Recycling and Disposal . . . . . . . 15

Installing the Lithium-Ion (Li-Ion)

Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Removing the Lithium-Ion (Li-Ion)

Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Alkaline Battery Pack

(Optional Accessory) . . . . . . . . . . . . . . . 17

Installing Alkaline Batteries . . . . . . . . . . 17

Removing Alkaline Batteries . . . . . . . . . 17

Attaching the Antenna . . . . . . . . . . . . . . 18

Removing the Antenna . . . . . . . . . . . . . 18

Installing Spring Action Belt Clip . . . . . . 19

Power Supply, Adaptor and

Drop-in Tray Charger. . . . . . . . . . . . . . . 19

Battery Life Information . . . . . . . . . . . . . 20

Alkaline Battery Life . . . . . . . . . . . . . . . . 20

Charging the Battery . . . . . . . . . . . . . . . 21

Getting Started . . . . . . . . . . . . . . . . . . . . . 28

Turning radio ON/OFF . . . . . . . . . . . . . . . . . 28

Adjusting volume . . . . . . . . . . . . . . . . . . . . . 28

CONTENTS

English

2

Reading the Display . . . . . . . . . . . . . . . . . . .28

Selecting a Channel . . . . . . . . . . . . . . . . . . .29

Talking and Monitoring . . . . . . . . . . . . . . . . .29

Receiving a Call . . . . . . . . . . . . . . . . . . . . . .29

Signal Strength Indicator and

Channel Busy Indicators. . . . . . . . . . . . .30

Talk Range . . . . . . . . . . . . . . . . . . . . . . . . . .30

Radio LED Indicators . . . . . . . . . . . . . . . . . .32

Hands-Free Use/VOX . . . . . . . . . . . . . . . . . .33

With Compatible VOX Accessories. . . . .33

Hands Free without Accessories

(iVOX) . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Battery Save . . . . . . . . . . . . . . . . . . . . . .34

Reset to Factory Defaults . . . . . . . . . . . .34

End of Transmission Tone

(Roger Beep Tone) . . . . . . . . . . . . . . . . .34

Keypad Beeps. . . . . . . . . . . . . . . . . . . . .34

Keypad Lock/Unlock . . . . . . . . . . . . . . . .34

MENU Options . . . . . . . . . . . . . . . . . . . .35

Setting VOX / iVOX sensitivity . . . . . . . .35

Programming Features . . . . . . . . . . . . . . .37

Entering Programming Mode . . . . . . . . . . . .37

Programming RX (Reception) Frequencies .38

Programming RX (Reception) Codes

(CTCSS/DPL). . . . . . . . . . . . . . . . . . . . . . . . 38

Programming RX (Reception) Bandwidth . . 39

Programming Scramble

L

LL

L

. . . . . . . . . . . . . . 39

Programming Maximum Number of

Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Programming Call Tones . . . . . . . . . . . . . . . 41

Programming Microphone Gain Level . . . . . 42

Programming Microphone Accessory

Gain Level . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Other Programming Features . . . . . . . . . . . 43

Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Programming Buttons . . . . . . . . . . . . . . . . . 45

Editing Channel Alias Name . . . . . . . . . . . . 45

Nuisance Channel Delete . . . . . . . . . . . . . . 47

CPS (Computer Programming Software). . . 47

Bandwidth Select . . . . . . . . . . . . . . . . . . 48

Time-Out Timer . . . . . . . . . . . . . . . . . . . 48

Power Select . . . . . . . . . . . . . . . . . . . . . 48

Battery Type Setting . . . . . . . . . . . . . . . 49

Call Tones . . . . . . . . . . . . . . . . . . . . . . . 49

Scramble . . . . . . . . . . . . . . . . . . . . . . . . 49

Reverse Burst . . . . . . . . . . . . . . . . . . . . 49

CONTENTS

English

3

Cloning Radios . . . . . . . . . . . . . . . . . . . . . . .49

Cloning with a Multi-Unit Charger

(MUC) . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Cloning Radios using the Radio

to Radio (R2R) Cloning Cable

(optional accessory) . . . . . . . . . . . . . . . .52

Cloning Radios using the CPS

(Computer Programming Software) . . . .54

Troubleshooting . . . . . . . . . . . . . . . . . . . . .55

Use and Care . . . . . . . . . . . . . . . . . . . . . . .59

Frequency and Code Charts . . . . . . . . . . .60

CP110™ VHF Frequencies Chart. . . . . . . . .60

CP110™ UHF Frequencies Chart. . . . . . . . .60

CTCSS and PL/DPL Codes . . . . . . . . . . . . .61

Motorola Limited Warranty for the

United States and Canada . . . . . . . . . . . . .64

Accessories . . . . . . . . . . . . . . . . . . . . . . . .68

Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . .68

Audio Accessories. . . . . . . . . . . . . . . . . . . . .68

Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Carry Accessories . . . . . . . . . . . . . . . . . . . . .70

Software and Cables. . . . . . . . . . . . . . . . . . .70

Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

SAFETY

English

4

SAFETY

PRODUCT SAFETY AND RF

EXPOSURE COMPLIANCE

ATTENTION!

This radio is restricted to occupational use only

to satisfy FCC RF energy exposure

requirements.

For a list of Motorola-approved antennas,

batteries, and other accessories, visit the

following website which lists approved

accessories:

http://www.motorola.com

Before using this product,

read the operating

instructions and RF energy

awareness information

contained in the Product

Safety and RF Exposure

booklet enclosed with your

radio.

!

BATTERIES AND CHARGERS

SAFETY INFORMATION

English

5

BATTERIES AND

CHARGERS SAFETY

INFORMATION

This document contains important safety and

operating instructions. Read these instructions

carefully and save them for future reference.

Before using the battery charger, read all the

instructions and cautionary markings on

• the charger,

• the battery, and

• the radio using the battery

1. To reduce risk of injury, charge only the

rechargeable Motorola-authorized batteries.

Other batteries may explode, causing personal

injury and damage.

2. Use of accessories not recommended by

Motorola may result in risk of fire, electric

shock, or injury.

3. To reduce risk of damage to the electric plug

and cord, pull by the plug rather than the cord

when disconnecting the charger.

4. An extension cord should not be used unless

absolutely necessary. Use of an improper

extension cord could result in risk of fire and

electric shock. If an extension cord must be

used, make sure that the cord size is 18AWG

for lengths up to 6.5 feet (2 m), and 16AWG for

lengths up to 9.8 feet (3 m).

5. To reduce risk of fire, electric shock, or injury,

do not operate the charger if it has been broken

or damaged in any way. Take it to a qualified

Motorola service representative.

6. Do not disassemble the charger; it is not

repairable and replacement parts are not

available. Disassembly of the charger may

result in risk of electrical shock or fire.

7. To reduce risk of electric shock, unplug the

charger from the AC outlet before attempting

any maintenance or cleaning.

BATTERIES AND CHARGERS

SAFETY INFORMATION

English

6

OPERATIONAL SAFETY

GUIDELINES

• Turn the radio OFF when charging battery.

• The charger is not suitable for outdoor use. Use

only in dry locations/conditions.

• Connect charger only to an appropriately fused

and wired supply of the correct voltage

(as specified on the product).

• Disconnect charger from line voltage by removing

main plug.

• The outlet to which this equipment is connected

should be nearby and easily accessible.

• In equipment using fuses, replacements must

comply with the type and rating specified in the

equipment instructions.

• Maximum ambient temperature around the power

supply equipment must not exceed 40°C (104°F).

• Power output from the power supply unit must not

exceed the ratings stated on the product label

located at the bottom of the charger.

• Make sure that the cord is located where it will

not be stepped on, tripped over, or subjected to

water, damage, or stress.

INTRODUCTION

English

7

INTRODUCTION

Thank you for purchasing the Motorola®

CP110™ Series Radio. This radio is a product

of Motorola's 75 plus years of experience

as a world leader in the designing and

manufacturing of communications equipment.

The CP110™ Series radios provide

cost-effective communications for businesses

such as retail stores, restaurants, schools,

construction sites, manufacturing, property

and hotel management and more. Motorola

two-way radios are the perfect communications

solution for all of today's fast-paced industries.

Note: Read this user guide carefully to ensure you

know how to properly operate the radio

before use

Business Radios,

RPSD 1C15, Motorola

8000 West Sunrise Boulevard

Plantation, Florida 33322

PACKAGE CONTENTS

•Radio

• VHF/UHF Antenna

• Spring Action Belt-Clip

• Lithium-Ion Battery

• Power Supply

•User Guide

• Drop-in Tray Charger

• Product Safety & RF Exposure Booklet

For a copy of a large-print version of this user

guide or for product-related questions, contact:

1-800-924-2744 in the USA/Canada

1-888-390-6456 on your TTY

(Text Telephone)

FCC LICENSING

INFORMATION

English

8

FCC LICENSING

INFORMATION

INTERFERENCE INFORMATION

This device complies with Part 15 of the FCC

Rules. Operation is subject to the condition that

this device does not cause harmful

interference.

CP110™ Series two-way radios operate on

radio frequencies that are regulated by the

Federal Communications Commission (FCC).

To transmit on these frequencies, you are

required to have a license issued by the FCC.

Application is made available on FCC Form

601 and Schedules D, H, and Remittance

Form 159.

To obtain these FCC forms, request document

000601 which includes all forms and

instructions. If you wish to have the document

faxed, mailed or have questions, use the

following contact information.

Faxed contact the

Fax-On- Demand

system at:

Mailed call the FCC forms hotline at:

Questions regarding FCC

license contact the FCC at:

1-202-418-0177 1-800-418-FORM

1-800-418-3676

1-888-CALL-FCC

1-888-225-5322

Or: http://www.fcc.gov

FCC LICENSING

INFORMATION

English

9

Before filling out your application, you must

decide which frequency(ies) you can operate

on. See “Frequencies and Code Charts”. For

questions on determining the radio frequency,

call Motorola Product Services at:

1-800-927-2744

Changes or modifications not expressly

approved by Motorola may void the user’s

authority granted by the FCC to operate this

radio and should not be made. To comply with

FCC requirements, transmitter adjustments

should be made only by or under the

supervision of a person certified as technically

qualified to perform transmitter maintenance

and repairs in the private land mobile and fixed

services as certified by an organization

representative of the user of those services.

Replacement of any transmitter component

(crystal, semiconductor, etc.) not authorized by

the FCC equipment authorization for this radio

could violate FCC rules.

Use of this radio outside the country where it

was intended to be distributed is subject to

government regulations and may be prohibited.

RADIO OVERVIEW

English

10

RADIO OVERVIEW

PARTS OF THE RADIO

On/Off/

Volume

Knob

Antenna

Microphone

LED Indicator

Accessory

Connector

Model Label

Use and to scroll up/

down through channels and

menu setting

Front Buttons

PTT (Push-to-Talk)

Button

SB1 - Monitor

Button

SB2 - Nuisance

Channel Delete

Lithium-Ion

Battery

Use ‘Menu’ button

to lock keypad

RADIO OVERVIEW

English

11

On/Off/Volume Knob

Used to turn the radio ON or OFF and to adjust

the radio’s volume.

Accessory Connector

Used to connect compatible audio accessories.

Model Label

Indicates the model of the radio

Microphone

Speaks clearly into the microphone when

sending a message.

Antenna

The radio’s antenna is removable.

LED Indicator

Used to give battery status, power-up status,

radio call information and scan status.

Front Buttons

• Button

This button give you access to set up features

like VOX/ iVOX levels, battery type, etc. It also

allows you to move through all the features

while in Programming Mode.

• Toggle up / down buttons

Allows you to change channels and to scroll

up/down menu options or set up programming

values. These buttons are not programmable

buttons.

MENU

RADIO OVERVIEW

English

12

• Programmable Button

Default set to generate the current

programmed call tone.

• Programmable Button

Default set to preset Channel 1

• Programmable Button

Default set to preset Channel 2

Note: A short press of either preset button (B or C)

tunes the radio to the preset channel and

the radio will play a good chirp. You can

assign different functions to these buttons

via the CPS. For example: Backlight Time

Out, Reverse Burst, Power Select, Scan/

Nuisance Channel Delete, Monitor and Call

Tones. To learn more about how to program

these buttons refer to “Entering

Programming Mode” on page 37 and “CPS

(Computer Programming Software)” on

page 47

Side Buttons

Push-to-Talk (PTT) Button

Press and hold down this button to talk, release

it to listen.

Side Button 1 (SB1)

The Side Button 1 is a general button that can

be configured by the CPS. The default setting

of the SB1 button is ‘Monitor’.

Side Button 2 (SB2)

The Side Button 2 is a general button that can

be configured by the CPS. The SB2 button

default setting is ‘Scan/Nuisance Channel

Delete’.

The Lithium-Ion (Li-Ion) Battery

CP110™ Series provides different types of

batteries. For more information, see “Battery

Features” on page 14.

A

B

C

RADIO OVERVIEW

English

13

This User Guide covers multiple CP110™

Series models, and may detail some features

your radio does not have. The radio’s model is

shown on the front of the radio, underneath the

speaker, and tells you the following information:

Model

Frequency

Band

Transmit

Power (Watts)

Number of

Channels

Antenna

CP110 VHF 2 16 Removable

CP110 UHF 2 16 Removable

RADIO OVERVIEW

English

14

BATTERY FEATURES

CP110™ Series radios provide Lithium-Ion

batteries that come in different capacities that

will define the battery life. It also offers the

option to use Alkaline batteries. The radio

comes equipped with a rapid charger.

About the Li-Ion Battery

The CP110™ Series radio comes equipped

with a rechargeable Li-Ion battery. This battery

should be charged before initial use to ensure

optimum capacity and performance.

Battery life is determined by several factors.

Among the more critical are the regular

overcharge of batteries and the average depth

of discharge with each cycle. Typically, the

greater the overcharge and the deeper the

average discharge, the fewer cycles a battery

will last. For example, a battery which is

overcharged and discharged 100% several

times a day, lasts fewer cycles than a battery

that receives less of an overcharge and is

discharged to 50% per day. Further, a battery

which receives minimal overcharging and

averages only 25% discharge, lasts even

longer.

Motorola batteries are designed specifically to

be used with a Motorola charger and vice

versa. Charging in non-Motorola equipment

may lead to battery damage and void the

battery warranty. The battery should be at

about 77°F (25°C) (room temperature),

whenever possible. Charging a cold battery

(below 50° F [10°C]) may result in leakage of

electrolyte and ultimately in failure of the

battery. Charging a hot battery (above 95°F

[35°C]) results in reduced discharge capacity,

affecting the performance of the radio.

Motorola rapid-rate battery chargers contain a

temperature-sensing circuit to ensure that

batteries are charged within the temperature

limits stated above.

RADIO OVERVIEW

English

15

Battery Recycling and Disposal

Li-Ion rechargeable batteries can be recycled.

However, recycling facilities may not be

available in all areas. Under various U.S. state

laws and the laws of several other countries,

batteries must be recycled and cannot be

disposed of in landfills or incinerators. Contact

your local waste management agency for

specific requirements and information in your

area. Motorola fully endorses and encourages

the recycling of Li-Ion batteries. In the U.S. and

Canada, Motorola participates in the

nationwide Rechargeable Battery Recycling

Corporation (RBRC) program for Li-Ion battery

collection and recycling.

Many retailers and dealers participate in this

program. For the location of the drop-off facility

closest to you, access RBRC's Internet web

site at:

www.rbrc.com

or call:

1-800-8-BATTERY

This internet site and telephone number also

provides other useful information concerning

recycling options for consumers, businesses

and governmental agencies.

RADIO OVERVIEW

English

16

Installing the Lithium-Ion (Li-Ion) Battery

1. Turn OFF the radio.

2. With the Motorola logo side up on the battery

pack, fit the tabs at the bottom of the battery

into the slots at the bottom of the radio’s body.

3. Press the top part of the battery towards the

radio until a click is heard.

Note: To learn about the Li-Ion Battery Life

features, refer to “About the Li-Ion Battery”

on page 14

Removing the Lithium-Ion (Li-Ion) Battery

1. Turn OFF the radio.

2. Push down the battery latch and hold it

depressed while removing the battery.

3. Pull the battery away from the radio.

Battery

Latch

slots

Battery

Latch

RADIO OVERVIEW

English

17

Alkaline Battery Pack (Optional Accessory)

Installing Alkaline Batteries

1. Turn OFF the radio, if it is turned ON.

2. Remove Li-Ion battery.

3. Assemble alkaline battery pack in the same

steps as installing the Li-Ion battery pack.

4. Remove battery door from alkaline battery pack.

5. Slide the 5 AA alkaline batteries into the frame,

matching the markings inside the compartment

Removing Alkaline Batteries

1. Turn OFF the radio, if it is turned ON.

2. Slide the battery latches, on both sides of the

battery, downwards.

3. Pull the top of the battery away from the radio’s

body, and lift the battery from the radio’s body.

Alkaline

Battery

Door

Alkaline

Battery

Door

RADIO OVERVIEW

English

18

Attaching the Antenna

1. Align the threaded end of the antenna with the

radio’s antenna connector.

2. Turn the antenna clockwise to fasten it.

Removing the Antenna

1. Turn the antenna counterclockwise until you

can remove it.

La page est en cours de chargement...

Motorola CP110 Manuel utilisateur

Motorola CP110 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents