Aeg-Electrolux T35850 Manuel utilisateur

Marque: Aeg-Electrolux

Modèle: T35850

Catégorie: Sèche-linge

Taper: Manuel utilisateur

LAVATHERM T35850

User manual Exhaust Dryer

Notice d'utilisation Sèche-linge à

évacuation

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this

instruction manual carefully. It will enable you to navigate all processes perfectly

and most efficiently. To refer to this manual any time you need to, we recommend

you to keep it in a safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

Contents

Operating Instructions 3

Important safety information 3

Product description 5

Control panel 6

Before first use 6

Sorting and preparing laundry 6

Laundry weights 7

Programme overview 8

Daily use 9

Switching machine on / switching light on

Opening loading door / loading laundry

Selecting the programme 10

Selecting additional options 10

Setting delay timer 11

Starting the programme 11

Changing programme 11

Putting in extra items or taking items out

before end of programme 11

Drying cycle complete / removing laundry

Care and cleaning 12

Cleaning fluff filter 12

Cleaning the door 13

Cleaning the drum 13

Clean operating screen and housing 13

What to do if ... 14

Troubleshooting by yourself 14

Machine settings 15

BUZZER SIGNAL permanent off 15

Water hardness 15

Technical data 16

Installation 17

Appliance positioning 17

Removing transport safety packaging 17

Fitting the vent hose 18

Electrical connection 19

Changing door stop 19

Special accessories 19

Environment 20

Environmental tips 20

Service 21

Guarantee/Customer Service Centres 21

Subject to change without notice

Contents

Operating Instructions

Important safety information

In the interest of your safety and to ensure the correct use, before installing and

first using the appliance, read this user manual carefully, including its hints and

warnings. To avoid unnecessary mistakes and accidents, it is important to ensure

that all people using the appliance are thoroughly familiar with its operation and

safety features. Save these instructions and make sure that they remain with the

appliance if it is moved or sold, so that everyone using it through its life will be

properly informed on appliance use and safety.

General safety

• It is dangerous to alter the specifications or attempt to modify this product in any way.

• This appliance is not intended for use by persons (including children) with reduced

physical, sensory or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for

their safety.

• Make sure that small pets do not climb into the drum. To avoid this, please check into

the drum before using.

• Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp

material can cause extensive damage and must not be placed into the machine.

• In order to avoid danger of fires caused by excessive drying, do not use appliance to dry

the following items: Cushions, quilts and the like (these items accumulate heat).

• Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed

articles and clothes or pillows fitted with foam rubber pads should not be dried in the

tumble dryer.

• Always unplug the appliance after use, clean and maintenance.

• Under no circumstances should you attempt to repair the machine yourself. Repairs

carried out by inexperienced persons may cause injury or serious malfunctioning. Contact

your local Service Centre. Always insist on genuine spare parts.

• Items that have been soiled with substances such as cooking oil acetone, petrol, kerosene,

spot removers, turpentine, waxes and wax removers should be washed in hot water with

an extra amount of detergent before being dried in the tumble dryer.

•

Danger of explosion: Never tumble dry items that have been in contact with inflam-

mable solvents (petrol, methylated spirits, dry cleaning fluid and the like). As these sub-

stance are volatile, they could cause an explosion. Only tumble dry items washed with

water.

•

Risk of fire: items that have been spotted or soaked with vegetable or cooking oil

constitute a fire hazard and should not be placed in the tumble dryer.

• If you have washed your laundry with stain remover you must execute an extra rinse

cycle before loading your tumble dryer.

Important safety information

• Please make sure that no gas lighters or matches have accidentally been left in pockets

of garments to be loaded into appliance

WARNING!

Never stop a tumble dry before the end of the drying cycle unless all items are

quickly removed and spread out so that the heat is dissipated. Risk of fire!

•

Risk of electric shock! Do not spray down the appliance with jets of water.

• The final part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure

that the items are left at a temperature that ensures that items will not be damaged.

• Ensure you have adequate ventilation in the installation room to avoid the back flow of

gases into the room from appliances burning other fuels, including open fires.

Installation

• This appliance is heavy. Care should be taken when moving it.

• When unpacking the appliance, check that it is not damaged. If in doubt, do not use it

and contact the Service Centre.

• All packing and transit bolts must be removed before use. Serious damage can occur to

the product and to property if this is not adhered to. See relevant section in the user

manual.

• Any electrical work required to install this appliance should be carried out by a qualified

electrician or competent person.

• Care must be taken to ensure that the appliance does not stand on the electrical supply

cable.

• If the machine is situated on a carpeted floor, please adjust the feet in order to allow air

to circulate freely.

• After having installed the appliance, check that it is not pressing or standing on its

electrical supply cable or/and inlet hose.

• If the tumble dryer is placed on top of a washing machine, it is compulsory to use the

stacking kit (optional accessory).

Use

• This appliance is designed for domestic use. It must not be used for purposes other than

those for which it was designed.

• Only wash fabrics which are designed to be machine dried. Follow the instructions on

each garment label.

• Do not dry unwashed items in the tumble dryer.

• Do not overload the appliance. See the relevant section in the user manual.

• Clothes which are dripping wet should not be placed in the dryer.

• Garments which have been in contact with volatile petroleum products should not be

machine dried. If volatile cleaning fluids are used, care should be taken to ensure that

the fluid is removed from the garment before placing in the machine.

• Never pull the power supply cable to remove the plug from the socket; always take hold

of the plug itself.

• Never use the tumble dryer if the power supply cable, the control panel, the working

surface or the base are damaged so that the inside of the tumble dryer is accessible.

• Fabric softeners, or similar products should be used as specified by the fabric softener

instructions.

Important safety information

•

Caution - hot surface : Do not touch the door light cover surface when the light is

switched on.

•

Hot surface: Do not touch the back of the appliance while it is operating!

Child safety

• This machine is not intended for use by young children or infirm persons without su-

pervision.

• Children should be supervised to ensure that they do not play with the appliance.

• The packaging components (e.g. plastic film, polystyrene) can be dangerous to children

- danger of suffocation! Keep them out of children’s reach.

• Keep all detergents in a safe place out of children’s reach.

• Make sure that children or pets do not climb into the drum.

Product description

1 Control panel

2 Door

3 Fluff filter

4 Lamp for inside light

5 Rating plate

6 Adjustable feet

7 Sideways vent outlets / back vent outlet

1) Only dryers equipped with internal drum light.

Product description

8 Ring nut

Control panel

1 Programme knob and OFF switch

2 Function buttons

3 START PAUSE button

4 DELAY START button

5 Function status led

Before first use

In order to remove any residues which may have been produced during production, wipe

the dryer drum with a damp cloth or carry out a brief drying cycle (ca. 30 min.) with damp

cloths in the machine.

Sorting and preparing laundry

Sorting laundry

• Sort by fabric type:

– Cotton/linen for programmes in COTTON programme group.

– Mixtures and syntheticsfor programmes in SYNTHETICS programme group.

START

FILTER

DRYING

COOLING

END

PAUSE

DELAY START

DELICATE

SENSITIVE

LONG

ANTI-

CREASE

BUZZER

DRUM LIGHT

COTTONS

EASY CARE

EXTRA DRY

STORAGE DRY

IRON DRY

WOOL CARE

EASY IRON PLUS

SPORTS

LIGHT

JEANS

BED LINEN

FRESHEN-UP

30 MIN

OFF

EXTRA DRY

STORAGE DRY

IRON DRY

Control panel

• Sorting by care label. The care labels mean:

Drying in the tumble

dryer possible in prin-

ciple

Dry at normal tem-

perature

Dry at reduced tem-

perature (press DELI-

CATE button!)

Drying in the tumble

dryer not possible

Do not place in the appliance any wet laundry which is not specified on the care label as

being suitable for tumble-drying.

This appliance can be used for all wet laundry items which are labelled as suitable for

tumble-drying.

• Do not dry new, coloured textiles together with light-coloured laundry items. Textile

colours may bleed.

• Do not dry cotton jersey and knitwear with the EXTRA programme. Items may shrink!

•

Wool can be dried only by special programme WOOL CARE !

Preparing laundry

• To avoid laundry becoming tangled: close zips, button up duvet covers and tie loose ties

or ribbons (e.g. of aprons).

• Empty pockets. Remove metal items (paper clips, safety pins, etc).

• Turn items with double-layered fabrics inside out (e.g. with cotton-lined anoraks, the

cotton layer should be outermost). These fabrics will then dry better.

Laundry weights

Type of laundry Weight

Bathrobe 1200 g

Napkin 100 g

Quilt cover 700 g

Sheet 500 g

Pillow case 200 g

Tablecloth 250 g

Towelling towel 200 g

Tea cloth 100 g

Night dress 200 g

Ladies' briefs 100 g

Man's work shirt 600 g

Man's work shirt 200 g

Man's pyjamas 500 g

Blouse 100 g

Men's underpants 100 g

Sorting and preparing laundry

Programme overview

Programmes

max. load (weight when dry)

Additional func-

tions/options

Application/properties

Care mark

DELICATE

SENSITIVE

LONG ANTICREASE

BUZZER

DELAY START

COTTON

EXTRA DRY

7 kg • • • • •

Thorough drying of thick or multi- layered fabrics,

e.g. terry towelling items, bathrobes.

COTTON

STORAGE

DRY

7 kg • • • • •

Thorough drying of fabrics of even thicknesses, e.g.

terry towelling items, knitwear, towels.

COTTON

IRON DRY

7 kg • • • • •

For thin fabrics which are also to be ironed, e.g.

knitwear, cotton shirts.

SYNTHET-

ICS (syn-

thetics)EX-

TRA DRY

3 kg • • • • •

Thorough drying of thick or multi-layered fabrics,

e.g. pullovers, bedding, table linen.

SYNTHET-

ICS STOR-

AGE DRY

3 kg • • • • •

For thin fabrics which are not ironed, e.g. easy care

shirts, table linen, baby clothes, socks, lingerie with

bones or wires.

SYNTHET-

ICS IRON

DRY

3 kg • • • • •

For thin fabrics which are also to be ironed, e.g.

knitwear, cotton shirts.

30 MIN 1 kg • - • • •

For further drying of individual items of laundry or

for small volumes of less than 1 kg.

FRESHEN

1 kg • - • • •

For refreshing or gently cleaning textiles with

commercially available dry cleaning products.

BED LINEN 3 kg • - • • •

Bed linen (single and double sheet, pillowcase,

bedspread, duvet cover).

JEANS 7 kg • • • • •

For leisure clothing, such as jeans, sweat-shirts,

etc., of different material thicknesses (e.g. at the

neck, cuffs and seams).

Programme overview

Programmes

max. load (weight when dry)

Additional func-

tions/options

Application/properties

Care mark

DELICATE

SENSITIVE

LONG ANTICREASE

BUZZER

DELAY START

SPORTS 2 kg

- • • •

For sportswear, thin fabrics, polyester, which are

not ironed.

EASY IRON

1 kg

(or 5

shirt

)

- • • •

Special programme with anti-crease mechanism

for easy care textiles such shirts and blouses; for

minimum ironing effort. The result depends on the

type and quality of textiles. (The loading volume

corresponds to approx. 5 to 7 shirts.) Recommen-

dation: Place textiles in the dryer straight after

spinning. Once dried, immediately remove textiles

and place on clothes hanger.

WOOL

CARE

1 kg • - - • •

WOOL CARE is special programme for briefly treat-

ing woollens with warm air after they have been

dried naturally, worn or stored for long periods.

Wool fibres are aligned and the wool becomes soft

and snugly.

1) In accordance with IEC61121

2) select DELICATE option

3) Automatic

Daily use

Switching machine on / switching light on

Turn the programme selector to any programme. The machine has been switched on.

Daily use

Opening loading door / loading laundry

1. Open loading door:

Use force to push against the loading door

(push point)

2. Load your laundry (do not force it in).

CAUTION!

Do not jam laundry in between the loading

door and rubber seal.

3. Close loading door securely. Lock must

audibly lock.

Selecting the programme

Use the programme selector to set the programme you require.

Selecting additional options

The additional options available for the drying programmes are DELICATE , SENSITIVE , LONG

ANTICREASE and BUZZER

1. By turning the knob choose a drying programme.

2. To set the option press required option button. The corresponding lights on .

3. Press alternately option button to select appropriate options. START PAUSE icon flashes.

Some options cannot be selected together as DELICATE and SENSITIVE. Some of them are

not selectable with certain programmes

DELICATE

For especially gentle drying of sensitive fabrics

with the

care label and for temperature-sen-

sitive textiles (e.g. acrylic, viscose). Programme is

executed with reduced heat.

DELICATE is only suitable for use with loads of up

to 3kg.

LONG ANTICREASE

A long anti-crease phase lengthen the anti-crease phase (30 min.) at the end of the drying

additionally by 60 minutes. The drum rotates at intervals during this phase. This keeps the

laundry loose and free of creases. Phase lasts in total 90 minutes. The laundry can be

removed at any time during the anti-crease phase.

When the option is active, the LONG ANTICREASE light is on.

SENSITIVE

For gentle drying of fabrics that are frequently worn. Programme starts on full heat setting,

which is then reduced as the programme progresses to be kind to the washing.

Daily use

BUZZER

The appliance is supplied with the BUZZER function deactivated.

To activate buzzer choose BUZZER option.

The buzzer sounds or plays a tune during:

– cycle end

– anti-crease phase and when phase starts or ends

– cycle interruption by a warning

–alarm

Setting delay timer

With the DELAY START button, you can delay the start of a programme by 3, 6 or 9

hours.

1. Select the programme and additional functions.

2. Press the DELAY START button as many times as necessary (the lights show which delay

time have been chosen).

To activate the delay timer, press the START PAUSE button. The lights (9H, 6H, 3H)

change on every three hours until the time is getting on for start cycle.

Starting the programme

Press the START PAUSE button. The programme is started.

The programme phase is shown by appropriate lights. From up to the down, from DRYING ,

COOLING, to END .

Changing programme

To change a programme which has been selected by mistake once the programme has

started, first turn the programme selector to OFF position. The programme is cancelled.

The programme can no longer be changed directly once the programme has started. If

nevertheless there is an attempt to change the programme on the programme knob or if

an function button (excluding the BUZZER button) is pressed, led above START PAUSE

button starts flashing temporarily in yellow. The drying programme is not however affected

by this (laundry protection).

Putting in extra items or taking items out before end of programme

1. Open loading door.

WARNING!

Laundry and drum can become hot. Risk of burns!

2. Load or remove laundry items.

3. Close loading securely. Lock must audibly lock.

4. Press the START PAUSE button to continue the drying cycle.

Drying cycle complete / removing laundry

Once the drying cycle is complete, the lights END and FILTER are on. If the BUZZER button

has been pressed, an acoustic signal sounds intermittently for about one minute.

Daily use

The drying cycles (except for the and WOOL CARE programme) are automatically followed

by an anti-crease phase which lasts around 30 minutes. The drum rotates at intervals during

this phase. This keeps the laundry loose and free of creases. The laundry can be removed at

any time during the anti-crease phase. (The laundry should be taken out towards the end

of the anti-crease phase at the latest to prevent creases from forming.) If LONG ANTI-

CREASE function has been selected, the anti-crease phase is lengthened by 60 minutes.

1. Open door.

2. Remove laundry.

3. Remove filter after clothes has been removed. Clean the filter.

WARNING!

Before You place the filter , please check it there is nothing inside the filter seat.

4. Turn the programme selector to OFF.

Clean the filter after each drying cycle.

5. Close the door.

Care and cleaning

WARNING!

The tumble dryer is not to be used if industrial chemicals have been used for cleaning!

Cleaning fluff filter

The filter collect all the fluff which accumulates during drying. To ensure that the dryer

works perfectly, the fluff filter must be cleaned after every drying cycle.

The light ZEEF is on to remind you this operation.

CAUTION!

Never operate the dryer without fluff filter or with damaged or blocked fluff filter.

1. Open loading door and remove laundry.

2. Remove the filter which is built into the

lower part of the loading aperture.

Care and cleaning

3. Open the filter pressing the button,

among two slots on fingers. Clean the fil-

ter using dump hand or cloth. After a pe-

riod of time, a patina due to detergent

residue on laundry forms on the filters.

When this occurs, clean the filter with

warm water using a brush.

Close the filter and do not forget to put it

back.

WARNING!

Before You place the filter, please check it

there is nothing inside the filter seat.

4. The filter can be positioned only to one side. If position is wrong, the filter overhangs.

If the filter will not snap into place, the loading door cannot be closed.

WARNING!

You must DISCONNECT the appliance from the electricity supply, before you can carry out

any cleaning or maintenance work.

Cleaning the door

Clean periodically the interior part of the door to remove any fluff. Accurate cleaning

ensures correct drying.

Cleaning the drum

CAUTION!

Do not use abrasives or steel wool to clean the drum.

Lime in the water or cleaning agents may form a barely visible lining on the inside of the

drum. The degree to which the laundry has been dried is then no longer detected reliably.

The laundry is damper than expected when removed from the dryer.

Use a standard domestic cleaner (e.g. vinegar-based cleaner) to wipe down the inside of

the drum and drum ribs.

Clean operating screen and housing

CAUTION!

Do not use furniture cleaners or aggressive cleaning agents to clean the machine.

Use a damp cloth to wipe down the operating screen and housing.

Care and cleaning

What to do if ...

Troubleshooting by yourself

Problem Possible cause Remedy

Dryer does not work.

Mains plug is not plugged in or

fuse is not working correctly.

Plug in at mains socket. Check

fuse in fuse box (domestic in-

stallation).

Loading door is open. Close loading door.

Have you pressed the START

PAUSE button?

Press the START PAUSE button

again.

Drying results unsatisfactory.

Wrong programme selected.

Select a different programme

the next time you dry (see “Pro-

gramme chart” chapter).

Filter clogged. Clean filter.

Overloading of laundry.

Observe recommended loading

volumes.

Ventilation slots covered up. Uncover ventilation slots.

Residue on inside surface of

drum or drum ribs.

Clean inside surface of drum

and drum ribs.

Conductance of water at in-

stallation site differs from

standard setting of machine.

Re-programme standard set-

ting for degree of drying (see

‘Programming options’ chap-

ter).

Loading door does not close. Filter not in place. Install filter into place.

Drum light does not work.

Programme selector in OFF po-

sition.

Turn programme selector to

LIGHT or to any programme.

Defective light bulb.

Replace light bulb (see next

section).

Drying cycle ends shortly after

programme starts.

Not enough washing loaded or

washing loaded is too dry for

selected programme.

Select time programme or

higher drying level (e.g. EXTRA

DRYinstead of STORAGE DRY).

Drying cycle lasts an unusually

long time. Note: After around 5

hours the drying cycle ends au-

tomatically.

Filter clogged. Clean filter.

Load volume too big. Reduce load volume.

Laundry insufficiently spun.

Laundry must be adequately

spun.

Particularly high room temper-

ature. Temporary switching off

of the compressor to avoid

overload.

Automatic process, there is no

fault with the appliance. If pos-

sible, lower the room tempera-

ture.

What to do if ...

Changing the bulb for interior lighting

Only use a special bulb which is designed specially for dryers. The special bulb can be

obtained from your local service centre.

When the appliance is switched on, the interior lighting switches itself off after 4 minutes

when the door is open.

WARNING!

Do not use standard bulbs! These develop too much heat and may damage the machine!

Before replacing the bulb, disconnect the mains plug; with a permanent connection: fully

unscrew or deactivate the fuse.

1. Unscrew cover above the bulb (this can be found directly behind the loading aperture,

at the top; refer to “Description of machine” section.)

2. Replace defective bulb.

3. Screw cover back down.

Check the correct positioning of o-ring gasket before screwing back the door light cover.

Do not operate the dryer when missing o-ring gasket on door light cover.

WARNING!

For safety reasons, the cover must be screwed down tightly. If this is not done, the dryer

must not be operated.

Machine settings

BUZZER SIGNAL permanent off

1. Turn the programme selector to any programme. If the buzzer light is on, the buzzer

signal is active.

2. Press simultaneously the DELICATE and SENSITIVE buttons and hold down for approx.

5 seconds. The buzzer light is turn off. The buzzer signal is permanent off.

3. The buzzer is by default always off. You can use BUZZER button to activate or deactivate

sound but machine does not memorize your selection.

Water hardness

Water contains, a variable quantity of limestone and mineral salts of which quantities vary

according to geographical locations thus varying its conductivity values. Relevant varia-

tions of the conductivity of the water compared to those prefixed by the factory could

slightly influence the residual humidity of the laundry at the end of the cycle. Your dryer

allows you to regulate the sensitivity of the drying sensor based on conductivity values of

the water.

1. Turn the programme selector to any programme.

2. Press simultaneously the DELICATE and BUZZER buttons and hold down for approx. 5

seconds. The current setting is on the lights: light "END "– low conductivity <300 micro

S/cm, light "COOLING" – medium conductivity 300-600 micro S/cm,lightS "COOLING

"and "END"– high conductivity >600 micro S/cm

3. Press the START PAUZE button sequentially until you set desired level.

Machine settings

4. To memorize setting press simultaneously the DELICATE and BUZZER buttons or turn

knob to OFF position

Technical data

This appliance conforms with the following EU Directives:

– 2006/95/EC dated 12.12.2006 Low Voltage Directive

– 89/336/E.E.C dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC

– 93/68/EEC dated 22.07.1993 CE Marking Directive

Height x width x depth 85 x 60 x 58 cm

Drum volume 108 l

Depth with loading door open 109 cm

Height can be adjusted by 1.5 cm

Weight when empty approx. 32,5 kg

Loading volume (depends on programme)

max. 7 kg

Voltage 220-240 V

Required fuse 13 A

Total power 2600 W

Energy efficiency class

Energy consumption (7 kg of cotton, pre-

drained at 1000 rpm)

3.9 kWh

Average annual energy consumption 263.1 kWh

Use Domestic

Permissible ambient temperature + 5°C to + 35°C

Consumption values

The consumption values have been established under standard conditions. They may deviate when

the machine is operated in domestic circumstances.

Programme

Energy consumption in kWh / average dry-

ing time in min.

COTTON STORAGE DRY

3.9 / 95(7 kg load pre-drained at 1000 rpm)

COTTON IRON DRY

3.05 / 75 (7 kg load pre-drained at 1000 rpm)

SYNTHETICS CUPBOARD DRY

1.15 / 30 (3 kg load pre-drained at 1200 rpm)

1) Different loading volume data may be needed in some countries as a result of different measuring methods.

2) in accordance with EN 61121

Technical data

Installation

Appliance positioning

• It is recommended that, for your convenience, the machine is positioned close to your

washing machine.

• The tumble dryer must be installed in a clean place, where dirt does not build up.

• Air must be able to circulate freely all round the appliance. Do not obstruct the front

ventilation grille or the air intake grilles at the back of the machine.

• To keep vibration and noise to a minimum when the dryer is in use, it should be placed

on a firm, level surface.

• Once in its permanent operating position, check that the dryer is absolutely level with

the aid of a spirit level. If it is not, raise or lower the feet until it is.

• The feet must never be removed. Do not restrict the floor clearance through deeppile

carpets, strips of wood or similar. This might cause heat built-up which would interfere

with the operation of the appliance.

The hot air emitted by the tumble dryer can reach temperatures of up to 60°C. The appliance

must therefore not be installed on floors which are not resistant to high temperatures.

When operating the tumble dryer, the room temperature must not be lower than +5°C and

higher than +35°C, as it may affect the performance of the appliance.

WARNING!

Should the appliance be moved, it must be transported vertically.

WARNING!

The appliance must not be installed behind the lockable door, a sliding door or a door with

a hinge on the opposite side to that of the appliance.

Removing transport safety packaging

CAUTION!

Before use all parts of the transport packaging must be removed.

1. Open loading door

2. Pull off adhesive strips from inside ma-

chine on top of drum.

Installation

3. Remove foil hose and polystyrene pad-

ding from the machine.

Fitting the vent hose

To simplify the installation, there is a choice of vent outlets: one at the back, the others in

the left and right-hand side. Connect the hose to whichever is the more convenient by

pulling the ring nut (A) from the vent outlet at the back, screwing it on to the hose and

pushing it firmly back into place. The unused vents should now be sealed with the special

snap covers provided.

If the hose is long and the room temperature low,

the moisture might condense to water inside the

hose. This is an unavoidable natural phenomenon.

To prevent this water from Iying in the hose or

flowing back into the tumble dryer, it is advisable

to drill a small hole (via. 3 mm) in the lowest point

of the hose and to place a small container below

it. (See picture, point B).

Once connected to the dryer, run the vent hose to

the desired outlet point, ensuring that the run’s

overall length is less than 2 m, and that it contains

no more than two bends. As to the outlet itself, if

you have decided on a fixed wall/window grille, a

good local builder’s merchant should be able to

supply you with the necessary fittings and installation advice.

Installation

WARNING!

It is important not to connect the vent hose to, for

example, a cooker hood, or a chimney or flue pipe

designed to carry the exhaust from a fuel burning

appliance.

Note that to avoid condensation problems, it is

essential that the dryer be fitted with the flexible

hose to carry its “exhaust” at least beyond the

kitchen units; preferable outside the kitchen. In

order to prevent the appliance from overheating,

it is important that the steam exhaust is unob-

structed. Therefore, in case of a permanent hose

fitted to an exterior wall or ceiling, it must be en-

sured an exhaust capacity of at least 150 m3/h. If

the dryer is fitted next to kitchen units, make sure that the vent hose is not squashed. If

the hose is partially squashed, drying efficiency will be reduced, resulting in longer drying

times and higher energy consumption. If the hose is completely squashed, the safety cut-

outs with which the machine is fitted may operate. When operating the tumble dryer, the

room temperature must not be lower than +5°C and higher than +35°C, as it may affect

the performance of the appliance.

Electrical connection

Details on mains voltage, type of current and the fuses required should be taken from the

type plate. The type plate is fitted near the loading aperture (see “Product description”

chapter).

Connect the machine to an earthed socket, in accordance with current wiring reg-

ulations.

WARNING!

The manufacturer declines any responsibility for damage or injury through failure

to comply with the above safety precautions.

Should the appliance power supply cable need to be replaced, this must be carried

out by our Service Center.

WARNING!

The plug must be accessible after installing the machine.

Changing door stop

To make it easier to load or unload the laundry the door can be reversed. This operation

must be carried out by qualified personnel. Please contact the nearest Service Centre.

Special accessories

Stacking kit

Installation

A special stacking kit is available through your

dealer, to enable the mounting of the dyer on

top of a front loading washing machine with

cover’s depth between 48 and 60 cm. Read

carefully the instructions supplied with the kit.

Environment

The symbol on the product or on its packaging indicates that this product may not be

treated as household waste. Instead it should be taken to the appropriate collection point

for the recycling of electrical and electronic equipment. By ensuring this product is disposed

of correctly, you will help prevent potential negative consequences for the environment

and human health, which could otherwise be caused by inappropriate waste handling of

this product. For more detailed information about recycling of this product, please contact

your local council, your household waste disposal service or the shop where you purchased

the product.

Packaging material

The packaging materials are environmentally friendly and can be recycled. The plastic com-

ponents are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging

materials in the appropriate container at the community waste disposal facilities.

WARNING!

When disposing of old appliances, remove the mains cable and dispose of together with

the plug. Remove the door hook and ensure it is no longer lockable to prevent young

children being trapped inside.

Environmental tips

• In the dryer, laundry becomes fluffy and soft. Fabric softeners are not therefore needed

when washing.

Environment

La page charge ...

Aeg-Electrolux T35850 Manuel utilisateur

Marque: Aeg-Electrolux

Modèle: T35850

Catégorie: Sèche-linge

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Aeg-Electrolux T35850 User manual

Aeg-Electrolux T35850 Manuel utilisateur

Aeg-Electrolux T35850 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents