Levana LV-TW501-C Manuel utilisateur

Marque: Levana

Modèle: LV-TW501-C

Catégorie: Moniteurs vidéo bébé

Taper: Manuel utilisateur

USeR MANUAL

www.myLevana.com

Model #:

Safe’N See

Additional Camera

for LV-TW501 Digital Baby Monitor

Model #: LV-TW501-C

We take quality very seriously. This is why all of our products come with a one year warranty from the original

purchase date against defects in workmanship and materials. If you have warranty or support issues please

Phone: 1.866.946.7828 LEVANA Canada LEVANA USA

Fax: 1.888.771.1701 4080 Montrose Road 60 Industrial Parkway #Z64

Web: www.myLEVANA.com Niagara Falls, ON Cheektowaga NY 14227

Canada, L2H 1J9 USA 14305

Warranty Terms

1. LEVANA products are guaranteed for a period of one year from the date of purchase against defects in

workmanship and materials. This warranty is limited to the repair, replacement or refund of the purchase

price at LEVANA’s option.

2. This warranty becomes void if the product shows evidence of having been misused, mishandled or

tampered with contrary to the applicable instruction manual.

3. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of this

warranty.

4. The warranty expressly provided for herein is the sole warranty provided in connection with the product

itself and no other warranty, expressed or implied is provided. LEVANA assumes no responsibilities for

any other claims not specically mentioned in this warranty.

5. This warranty does not cover the shipping cost, insurance or any other incidental charges.

6. You MUST call LEVANA before sending any product back for repair. You will be sent a Return Authorization

form with return instructions. When returning the product for warranty service, please pack it carefully

in the original box with all supplied accessories, and enclose your original receipt or copy, and a brief

explanation of the problem (include RA #).

7. This warranty is valid only in Canada and the continental U.S.

8. This warranty cannot be re-issued.

PRODUCT WARRANTY

INFORMATION

Please visit our web site at www.myLEVANA.com for

information about your product’s warranty

INTRODUCTION

PRODUCT WARRANTY INFORMATION ............................................................................................................ 2

INTRODUCTION ............................................................................................................................................ 3

WHAT’S INCLUDED ........................................................................................................................................ 3

FEATURES ..................................................................................................................................................... 4

BUTTONS AND CONNECTIONS - CAMERA ....................................................................................................... 5

MOUNTING THE CAMERA .............................................................................................................................. 7

PLACING THE BABY CAMERA ......................................................................................................................... 7

TO MOUNT ON A TALBLETOP SAFELY ............................................................................................................. 7

TO MOUNT ON A WALL SAFELY ...................................................................................................................... 7

SETTING UP YOUR SYSTEM ............................................................................................................................ 8

BATTERY OPERATION ................................................................................................................... 8

ATTACHING POWER TO THE CAMERA ........................................................................................... 8

CAMERA OPERATION .................................................................................................................................... 9

SWITCHING THE CAMERA ON/OFF ............................................................................................... 9

NIGHT VISION .............................................................................................................................. 9

NIGHTLIGHT................................................................................................................................. 9

PAIRING THE DEVICES ................................................................................................................................. 10

TROUBLESHOOTING ..................................................................................................................................... 11

SPECIFICATIONS .......................................................................................................................................... 12

FCC STATEMENT .......................................................................................................................................... 13

SAFETY INSTRUCTIONS ................................................................................................................................ 13

TABLE OF CONTENTS

Congratulations on your purchase of the Levana

TW501-C additional camera! This camera uses advanced

Clearvu® digital technology that will deliver a crystal clear view of your

baby’s room no matter where you are in the house. Feel free to relax and

take comfort in knowing that your child is in good hands with Levana.

WHAT’S INCLUDED

Night Vision

Camera

• Power Adapter

• User Manual

• 24/7 Lifetime Live

Customer Support

FEATURES

ClearVu® Digital Wireless Technology

ClearVu® technology ensures outstanding image and sound clarity so that

you can watch and listen to your child up to 450ft away!

With Levana, you will never miss a moment.

Temperature Monitoring to Ensure Safety

Many studies indicate that your baby’s room should be between 61°-68° F (16°-20° C). This camera

is equipped so you can monitor the temperature in your baby’s room and know that they are always

safe and comfortable.

Talk to Baby™ Intercom

Soothe your baby from a distance with the Talk to Baby™ intercom. With the simple press of a button

you can let your baby know you are on your way to their nursery or simply talk to them until they fall

back to sleep without having to go into his or her room.

Night Vision

The built-in night vision allows you to see your child, in complete darkness. When the lights go out

the system automatically adjusts to the level of light. With 10ft of night vision range, the camera

can be placed anywhere in your child’s room while still displaying a precise image of your baby.

Relaxing Night Light

The camera has a gentle night light that you are able to turn on and o from the parent unit (not

included). Turn the light on if your baby is getting restless to calm them and turn it o when your

baby is asleep, all without going into the baby’s room.

Energy Ecient Power Adapter

The power adapter saves you on power all while saving the environment. It is rated with a Level V

eciency standard which means it is 30% more energy ecient than other conventional power

adapters.

Wall Mount for the Best Viewing Angle

The camera can be wall mounted so you can easily view your baby in its crib as well as see all other

parts of the nursery.

Lifetime Live Customer Support

Our customer support team can be reached by phone, by email and live web chat. Our experts will

be happy to assist you in English, French and Spanish.

Disclaimers

1. Optimum range is 150ft when signal is passing through walls or oors. Microwave ovens (when in use) may cause signal

disruption at close range. Buildings with metal frames may also cause signal disruption. Maximum transmission range is 450ft.

2. Night vision range up to 10ft under ideal conditions. Objects at or beyond this range may be partially or completely obscured,

depending on the camera application.

BUTTONS AND CONNECTIONS - CAMERA

1. Antenna

Transmits and receives signals

2. Night Vision IR LEDs

Allows you to see up to 10 feet in

complete darkness

3. Camera Lens

Point at what you would like to

view on the monitor

4. Microphone

Captures all sounds in the baby’s room

5. Night Light

Soothe baby to sleep with the built

in night light

6. CDS Light Sensor

Detects the absence of

light and turns on night vision

7. Power LED

Indicates that the camera is

powered on

8. Power Input

Plug the included adapter into

this jack

9. Temperature Sensor

Reads the temperature and

displays it on the monitor

10. Battery Compartment

Remove screw to install 4 AAA batteries

(not included) for a completely wireless

system

BUTTONS AND CONNECTIONS - CAMERA

MOUNTING THE CAMERA

Placing the Baby Camera

This camera can be placed on a tabletop or hung from a screw on the wall

above the area being monitored. Place the camera within ten feet of the area being monitored for

best picture, and to ensure that everything will be visible with the IR LEDs on.

Note: It is unsafe to mount the camera directly on the crib or anywhere within 3 feet of it.

Power cords should NEVER be left within baby’s reach.

To Mount on a Tabletop Safely:

1. Place the camera on a tabletop no less than 3 feet away from

your baby’s crib.

2. Feed the power cord down the back of the table or use wall

clips to secure the cord away so baby cannot reach.

3. Plug in the power cord, check to ensure that you are getting a

good view of your child and there are no obstructions.

To Mount on a Wall Safely:

Before drilling a hole, it is important to check the reception and camera positioning in the place that

you intend on hanging it to the wall. Ensure you are hanging the camera no less than 3 feet away

from baby’s crib.

1. Pre-drill a hole in the wall using a 3/16”, 4.8mm

drill bit.

2. Insert a wall anchor into the wall and tap gently with a

hammer until the anchor is ush with the wall.

3. Insert a screw into the wall anchor and tighten until the

screw only sticks out about 1/2 inch.

4. Plug the power cord into the power jack of the camera.

5. Locate the wall mounting hole on the bottom or back of

the camera.

6. Slide the hole over the screw sticking out of the wall.

7. Check to see that the camera is secure, if it is loose you may

have to tighten the screw more.

8. Use wall clips to secure the power cord away from the crib or

baby’s reach.

Battery Operation

The camera unit can be powered using 4 AAA batteries instead of the

included AC adapter.

1. Remove the battery compartment cover on the bottom of the camera base, using a small

phillips (cross) head screwdriver.

2. Place 4 AAA batteries (not included) in the compartment, paying attention to the labelled

polarity markings.

3. Replace the battery compartment cover using the small screwdriver.

Attaching Power to the Camera

1. Connect the AC adapter to the transmitter as shown in the diagram.

2. Connect the small end into the DC Jack on the back of the camera, connect the other end of the

adapter into an available wall outlet.

SETTING UP YOUR SYSTEM

Note: The power LED will ash when the battery charge is low.

Note: This camera is meant to be used in conjunction with the LV-TW501 Digital Baby Monitor

system. You cannot use this camera with any other system. For details on how to connect

your additional camera to a parent unit, please see the pairing instructions on page 10.

If you need to purchase a LV-TW501 system please visit www.mylevana.com or call our

support team at 1-866-946-7828.

CAMERA OPERATION

Switching the Camera ON/OFF

Position the camera to view the area you wish to monitor,

angle the camera lens for best view, by turning it up or

down.

1. Slide the power switch

to the ON position.

2. The Power LED on the front of the camera will light

up green. The camera is now ready to operate.

3. To turn OFF the camera, ip the power switch

back to the OFF position

↑

Note: If you are using batteries to power the camera unit, and it does not start up when the

power switch is in the ON position, you may need to replace the batteries. The Power

LED will ash slowly when the batteries have low power.

Night Vision

The camera is equipped with eight IR (infrared) LEDs. These LEDs, located on the front of the camera,

allow you to see up to ten feet in complete darkness. Allowing you to check your baby at any time

of night.The night vision LEDs will activate automatically when the camera detects that light levels

are low.

Night Light

The camera has a calming night light included, you must use the parent unit (sold separately) to

turn on this night light. You will nd detailed instructions on how to adjust the settings of your baby

monitor in the instruction manual included with the LV-TW501 system.

PAIRING THE DEVICES

The camera must be paired (connected) to a monitor (parent unit not

included). The monitor comes with the LV-TW501 packaged system. Please see

our website at www.mylevava.com or call our support team at 1-866-946-7828 if you cannot

connect your camera with a monitor, or if you need to purchase a monitor.

1. Slide the power switch

on the right hand side

of the camera to the OFF position.

2. Cover the light sensor on the front of the camera with

your nger or a cloth.

3. Slide the power switch

on the camera to the

ON position.

4. With the monitor switched on, press and hold the

play/pause button

for two seconds.

5. The pair icon

will appear on the screen and

the power LED on the camera will blink for a few

seconds.

6. Press the menu button

on the monitor to

conrm the setting.

7. C1... OK! will appear when the camera and monitor

are paired successfully and then the video and audio

will be transmitted automatically.

Note: If “C1...X” appears (pair failed) instead of “C1...OK!” you will have to remove all sources

of power from the camera and monitor and start the pairing process over again.

Light Sensor

TROUBLESHOOTING

PROBLEM SOLUTION

Equipment does not function • Camera and/or monitor are not

switched on

• The battery is dead or defective

• The power adapters are not connected

No reception • Camera and monitor are not paired

• Camera is too far away from monitor

• The VOX sensitivity is set too low

Reception Interference (static) • The camera and monitor are too far apart

• The battery power is too low

• Other electronic devices are interfering with the

signal

• The camera or monitor are placed near too many

metal objects

Feedback (screeching, static) • The camera and monitor are too close together

• The volume on the monitor is set too high

Picture works but there is no sound • Volume setting is too low

Picture is black and white • Night vision LEDs are ON

• Increase the amount of light in the room being

monitored

The rechargeable battery will not

charge

• The power adapters are not connected

• Battery pack is not plugged in inside the battery

compartment

• The monitor is not docked properly

Maintenance

• Clean the surfaces of the camera with a soft, u-free cloth

• If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to not allow

water into any openings

• Never use cleaning agents or solvents

SPECIFICATIONS

Camera Specications

Input Power...............................................................................100 - 240 VAC, 50 - 60 Hz ~ 200mA

Output Power ............................................................................6 VDC ~ 800mA

IR LEDs and Range ..................................................................... 4 LEDs, 10 foot range

Range.........................................................................................450 Feet Maximum

Frequency Range .......................................................................2.4 GHz

Operable Temperature ............................................................... 32 ˚ F to 104 ˚ F (0 ˚ C to 40 ˚ C)

Transmission Power ...................................................................15 ~17 dBm

FCC STATEMENT

SAFETY INSTRUCTIONS

Read and Keep Instructions: All the safety and operating instructions should be read before the

video baby monitor is operated.

Water and Moisture: This product is designed for indoor use only. The unit should not be exposed

to rain, moisture, dripping or splashing. No objects lled with liquid should be place on top of, or

beside the product, such as a glass or vase. This item should not be used near water.

This device complies with part 15 of

the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received,

including interference that may cause undesired

operation.

Any changes or modications not expressly approved by

the party responsible for compliance could void the user’s

authority to operate the equipment.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the

radiator and your body. This transmitter must not be co-located or operating in conjunction with

any other antenna or transmitter.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled

environment. This device and its antenna must not be co-located or operating in conjunction with

any other antenna or transmitter. This device has been tested for compliance with FCC RF Exposure

(SAR) limits in the typical laptop computer conguration and this device can be used in desktop or

laptop computers with side mounted USB slots. This device and its antenna must not be co-located

or operated in conjunction with any other antenna or transmitter.

IC STATEMENT:

Operation of this device is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of the device.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modications to this equipment. Such modications could void the user’s authority to operate the

equipment.

SAFETY INSTRUCTIONS

Non-Use Periods: Always unplug the AC adapters from the wall outlets

during long periods of non-use.

Ventilation: This baby monitor should not be used on a bed, sofa, rug or similar surface that may

block the ventilation openings, or be placed in an enclosed area, such as a bookcase or drawer that

may impede air ow.

Keep Away from Sources of Heat: This unit should not be exposed to direct heat sources such as

a candle, replace, radiator, heat register, stove or other appliance that emits heat. The unit should

not be left in direct sunlight.

Power Source: This unit should only be used with the AC power adapters included in this package

(rated 6V 800mA)

Damage Requiring Service: This unit should be serviced by qualied personnel only when:

a. Objects have fallen or liquid has been spilled into the product

b. The units have been exposed to rain

c. The units do not appear to operate normally or exhibits a distinct change in performance

d. The units have been dropped or the enclosure damaged

Caution: This product cannot replace responsible adult supervision of a child. You should personally

check your child’s activity at regular intervals.

STATEMENT ON REGULATION

These units are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy

and if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment o and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is

connected

• Consult the dealer or an experienced radio/TV technician for help

Operation with non-approved equipment or unshielded cables is likely to result in interference to

radio or TV reception. The user is cautioned that changes and modications made to the equipment

without the approval of manufacturer could void the user’s authority to operate this equipment.

NOTES

please visit

www.MYLevana.com for:

, Warranty information

, Product Support

, Contact information

, User Manual Downloads

, and much more!

visiter

www.mylevana.com pour:

, Informations de garantie

, Support technique

, informations de contact

, Manuels d'utilisateur

téléchargeable

, et beaucoup plus!

NOTES

CONSIGNES DE SÉCURITÉ

Ventilation: Ce moniteur bébé ne devrait pas être utilisé sur un lit, un

divan, un tapis ou une surface similaire qui pourrait bloquer les ouvertures de

ventilation, ou être placés dans un espace clos, tel qu’une bibliothèque ou un tiroir qui peut

empêcher l’écoulement de l’air.

Éviter les sources de chaleur : Cette unité ne devrait pas être exposée à des sources directes de

chaleur comme une bougie, cheminée, radiateur, un registre de chaleur, poêle ou autre appareil qui

émet de la chaleur. L’unité ne doit pas être laissée en plein soleil.

Source d’alimentation : Cette unité devrait être seulement utilisée avec les adaptateurs CA inclus

dans cet ensemble (évalué à 6V 800mA).

Dommages Exigeant le Service : Cette unité devrait être entretenue par le personnel qualié

seulement quand :

A. Des objets ont tombés ou du liquide a été renversé dans/sur le produit

B. Les unités ont été exposées à la pluie

C. Les unités ne semblent pas fonctionner normalement ou présentent un changement

notable de performance

D. Les unités ont été échappées ou le boîtier est endommagé

Attention: Ce produit ne peut remplacer la surveillance d’adultes responsables d’un enfant. Vous

devez vérier personnellement l’activité de votre enfant à des intervalles régulières.

DÉCLARATION SUR LE RÈGLEMENT

Ces unités sont conçues pour fournir une protection raisonnable contre les interférences nuisibles

dans une installation résidentielle. Cet équipement génère, utilise et peut émettre des fréquences

radio et s’il n’est pas installé et utilisé conformément aux instructions, peut causer des interférences

nuisibles aux communications radio. Cependant, il n’existe aucune garantie que des interférences ne

se produiront pas dans une installation particulière. Si cet équipement provoque des interférences

nuisibles à la réception radio ou de télévision, qui peuvent être déterminés en mettant l’équipement

hors tension, l’utilisateur est encouragé à essayer de corriger l’interférence par une ou plusieurs des

mesures suivantes:

• Réorienter ou déplacer l’antenne

• Augmenter la séparation entre l’équipement et le récepteur

• Connecter l’équipement à une prise sur un circuit diérent de celui auquel le récepteur

est branché

• Consulter le revendeur ou un technicien radio / TV

L’utilisation d’équipement non approuvé ou de câbles non blindés risque d’entraîner des interférences dans la

réception radio ou TV. L’utilisateur est averti que les changements et les modications apportées à l’équipement

sans l’approbation du fabricant peut annuler l’autorisation de l’utilisateur à utiliser cet équipement.

Cet appareil est conforme à la partie 15 des

règlements de la FCC. Son fonctionnement est

soumis aux deux conditions suivantes:

(1) Cet équipement ne doit pas causer d’interférences nuisibles et

(2) Cet équipement doit accepter toute interférence reçue, y

compris les interférences capables de causer un mauvais

fonctionnement.

Tout changement ou modication pas expressément approuvé par le parti responsable de la conformité

pourrait annuler l’autorité de l’utilisateur de faire fonctionner l’équipement.

Déclaration de la FCC de l’exposition aux radiations:

Cet équipement est conforme à l’exposition aux radiations dénies pour l’environnement non contrôlé.

Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre le radiateur

et votre corps. Cet émetteur ne doit pas être co-localisés ou fonctionner conjointement avec une

autre antenne ou transmetteur. Cet équipement est conforme aux limites établies par la FCC contre

l’exposition aux rayonnements RF pour un environnement non contrôlé. Cet appareil et son antenne ne

doivent pas être co-localisés ou fonctionner conjointement avec une autre antenne ou transmetteur. Ce

dispositif a été testé pour la conformité aux normes FCC d’exposition aux RF (SAR) des limites dans la

conguration typique ordinateur portable et ce dispositif peut être utilisé dans de bureau ou ordinateurs

portables avec ports USB latéraux montés. Cet appareil et son antenne ne doivent pas être co-localisé ou

fonctionné conjointement avec une autre antenne ou transmetteur.

DÉCLARATION IC:

Le fonctionnement de cet appareil est sujet aux conditions suivantes :

(1) Cet équipement ne doit pas causer d’interférences nuisibles et

(2) Cet équipement doit accepter toute interférence reçue, y compris les interférences capables de

causer un mauvais fonctionnement.

Remarque : Le fabricant n’est pas responsable d’aucune interférence radio ou TV causée par des modications

non autorisées à cet équipement. De telles modications pourraient annuler l’autorité de l’utilisateur à

opérer l’équipement.

CONSIGNES DE SÉCURITÉ

Lisez et conservez les instructions : Toutes les consignes de sécurité et de fonctionnement doivent

être lues avant de faire fonctionner le moniteur vidéo.

Eau et humidité: Ce produit est conçu pour une utilisation à l’intérieur. L’unité ne doit pas être exposée

à la pluie, l’humidité, des gouttes ou des éclaboussures. Aucun objet rempli de liquide ne doit être placé

sur le dessus ou à côté du produit, tel qu’un verre ou un vase. Ce produit ne doit pas être utilisé près de

l’eau

Periode de non utilisation : Débranchez les adaptateurs de la prise murale pendant de longues

périodes de non-utilisation.

DÉCLARATION DE LA FCC

La page charge ...

Levana LV-TW501-C Manuel utilisateur

Marque: Levana

Modèle: LV-TW501-C

Catégorie: Moniteurs vidéo bébé

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Levana LV-TW501-C User manual

Levana LV-TW501-C Manuel utilisateur

Levana LV-TW501-C Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents