Levana LV-TW501-C Manuel utilisateur

Marque: Levana

Modèle: LV-TW501-C

Catégorie: Moniteurs vidéo bébé

Taper: Manuel utilisateur

Ce manuel convient également à

Safe’N See

USeR MaNUaL

www.myLevana.com

Model #:

Safe’N See

Additional Camera

for LV-TW501 Digital Baby Monitor

Model #: LV-TW501-C

We take quality very seriously. This is why all of our products come with a one year warranty from

the original purchase date against defects in workmanship and materials. If you have warranty or

support issues please contact us using any of the following methods:

Phone: 1.866.946.7828 LEVANA Canada LEVANA USA

Fax: 1.888.771.1701 4080 Montrose Road 60 Industrial Parkway #Z64

Web: www.myLEVANA.com Niagara Falls, ON Cheektowaga NY 14227

Canada, L2H 1J9 USA 14305

Warranty Terms

1. LEVANA products are guaranteed for a period of one year from the date of purchase against

defects in workmanship and materials. This warranty is limited to the repair, replacement or

refund of the purchase price at LEVANA’s option.

2. This warranty becomes void if the product shows evidence of having been misused,

mishandled or tampered with contrary to the applicable instruction manual.

3. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the

terms of this warranty.

4. The warranty expressly provided for herein is the sole warranty provided in connection with

the product itself and no other warranty, expressed or implied is provided. LEVANA assumes

no responsibilities for any other claims not specically mentioned in this warranty.

5. This warranty does not cover the shipping cost, insurance or any other incidental charges.

6. You MUST call LEVANA before sending any product back for repair. You will be sent a Return

Authorization form with return instructions. When returning the product for warranty service,

please pack it carefully in the original box with all supplied accessories, and enclose your

original receipt or copy, and a brief explanation of the problem (include RA #).

7. This warranty is valid only in Canada and the continental U.S.

8. This warranty cannot be re-issued.

PRODUCT WARRANTY

INFORMATION

Please visit our web site at www.myLEVANA.com

for information about your product’s warranty

INTRODUCTION

PRODUCT WARRANTY INFORMATION .................................................................. 2

INTRODUCTION ................................................................................................ 3

WHAT’S INCLUDED ............................................................................................ 3

FEATURES ........................................................................................................ 4

BUTTONS AND CONNECTIONS - CAMERA .............................................................. 5

MOUNTING THE CAMERA ................................................................................... 7

PLACING THE BABY CAMERA ................................................................ 7

TO MOUNT ON A TALBLETOP SAFELY ...................................................... 7

TO MOUNT ON A WALL SAFELY .............................................................. 7

SETTING UP YOUR SYSTEM ................................................................................. 8

BATTERY OPERATION .......................................................................... 8

ATTACHING POWER TO THE CAMERA ..................................................... 8

CAMERA OPERATION ......................................................................................... 9

SWITCHING THE CAMERA ON/OFF ......................................................... 9

NIGHT VISION .................................................................................... 9

NIGHTLIGHT ....................................................................................... 9

PAIRING THE DEVICES ....................................................................................... 10

TROUBLESHOOTING .......................................................................................... 11

SPECIFICATIONS ............................................................................................... 12

FCC STATEMENT ............................................................................................... 13

SAFETY INSTRUCTIONS ...................................................................................... 13

TABLE OF CONTENTS

Congratulations on your purchase of the Levana

TW501-C additional camera! This camera uses advanced

Clearvu® digital technology that will deliver a crystal clear view of

your baby’s room no matter where you are in the house. Feel free

to relax and take comfort in knowing that your child is in good

hands with Levana.

WHAT’S INCLUDED

Night Vision

Camera

• Power Adapter

• User Manual

• 24/7 Lifetime Live

Customer Support

FEATURES

ClearVu® Digital Wireless Technology

ClearVu® technology ensures outstanding image and sound clarity so that

you can watch and listen to your child up to 450ft away! With Levana, you will never miss

a moment.

Temperature Monitoring to Ensure Safety

Many studies indicate that your baby’s room should be between 61°-68° F (16°-20° C).

This camera is equipped so you can monitor the temperature in your baby’s room and

know that they are always safe and comfortable.

Talk to Baby Intercom

Sooth your baby from a distance with the talk-to-baby intercom. With the simple press of

a button you can let your baby know you are on your way to their nursery or simply talk to

them until they fall back to sleep without having to go into his or her room.

Night Vision

The built-in night vision allows you to see your child, even in complete darkness. When

the lights go down the system automatically adjusts to the level of light. With 10ft of

night vision range, the camera can be placed anywhere in your child’s room while still

displaying a precise image of your baby.

Relaxing Night Light

The camera has a gentle night light that you are able to turn on and o from the parent

unit (not included). Turn the light on if your baby is getting restless to calm them and turn

it o when your baby is asleep, all without going into the baby’s room.

Energy Ecient Power Adapter

The power adapter saves you on power all while saving the environment. It is rated with

a Level V eciency standard which means it is 30% more energy ecient than other

conventional power adapters.

Wall Mount for the Best Viewing Angle

The camera can be wall mounted so you can easily view your baby in its crib as well as see

all other parts of the nursery.

24/7 Lifetime Live Customer Support

Our customer support team can be reached by phone 24/7 or by email and live web chat

services, so you always have access to an expert.

BUTTONS AND CONNECTIONS - CAMERA

1. Antenna

Transmits and receives signals

2. Night Vision IR LEDs

Allows you to see up to 10 feet in

complete darkness

3. Camera Lens

Point at what you would like to

view on the monitor

4. Microphone

Captures all sounds in the baby’s

room

5. Night Light

Soothe baby to sleep with the built

in night light

6. CDS Light Sensor

Detects the absence of

light and turns on night vision

7. Power LED

Indicates that the camera is

powered on

8. Power Input

Plug the included adapter into

this jack

9. Temperature Sensor

Reads the temperature and

displays it on the monitor

10. Battery Compartment

Remove screw to install 4 AAA

batteries (not included) for a

completely wireless system

BUTTONS AND CONNECTIONS - CAMERA

MOUNTING THE CAMERA

Placing the Baby Camera

This camera can be placed on a tabletop or hung from a screw on the wall

above the area being monitored. Place the monitor within ten feet of the area being

monitored for best picture, and to ensure that everything will be visible with the IR LEDs on.

Note: It is unsafe to mount the camera directly on the crib or anywhere within 3

feet of it. Power cords should NEVER be left within baby’s reach.

To Mount on a Tabletop Safely:

1. Place the camera/monitor on a tabletop no less than 3

feet away from your baby’s crib.

2. Feed the power cord down the back of the table or use

wall clips to secure the cord away so baby cannot reach.

3. Plug in the power cord, check to ensure that you are

getting a good view of your child and there are no

obstructions.

To Mount on a Wall Safely:

Before drilling a hole, it is important to check the reception and camera/monitor

positioning in the place that you intend on hanging it to the wall. Ensure you are hanging

the camera no less than 3 feet away from baby’s crib.

1. Pre-drill a hole in the wall using a 3/16”, 4.8mm

drill bit.

2. Insert a wall anchor into the wall and tap gently with

a hammer until the anchor is ush with the wall.

3. Insert a screw into the wall anchor and tighten until

the screw only sticks out about 1/2 inch.

4. Plug the power cord into the power jack of the

camera/monitor.

5. Locate the wall mounting hole on the bottom or back

of the camera/monitor.

6. Slide the hole over the screw sticking out of the wall.

7. Check to see that the camera/monitor is secure, if it is

loose you may have to tighten the screw more.

8. Use wall clips to secure the power cord away from the

crib or baby’s reach.

Battery Operation

The camera unit can be powered using 4 AAA batteries instead of the

included AC adapter.

1. Remove the battery compartment cover on the bottom of the camera base, using a

small phillips (cross) head screwdriver.

2. Place 4 AAA batteries (not included) in the compartment, paying attention to the

labelled polarity markings.

3. Replace the battery compartment cover using the small screwdriver.

Attaching Power to the Camera

1. Connect the AC adapter to the transmitter as shown in the diagram.

2. Connect the small end into the DC Jack on the back of the camera, connect the other

end of the adapter into an available wall outlet.

SETTING UP YOUR SYSTEM

Note: The power LED will ash when the battery charge is low.

Note: This camera is meant to be used in conjunction with the LV-TW501 Digital

Baby Monitor system. You cannot use this camera with any other system. For

details on how to connect your additional camera to a parent unit, please see

the pairing instructions on page 10. If you need to purchase a LV-TW501 system

please visit www.mylevana.com or call our support team at 1-866-946-7828.

CAMERA OPERATION

Switching the Camera ON/OFF

Position the camera to view the area you wish to

monitor, angle the camera lens for best view, by

turning it up or down.

1. Slide the power switch

to the ON position.

2. The Power LED on the front of the camera will

light up green. The camera is now ready to

operate.

3. To turn OFF the camera, ip the power switch

back to the OFF position

↑

Note: If you are using batteries to power the camera unit, and it does not start up

when the power switch is in the ON position, you may need to replace the

batteries. The Power LED will ash slowly when the batteries have low power.

Night Vision

The camera is equipped with eight IR (infrared) LEDs. These LEDs, located on the front of

the camera, allow you to see up to ten feet in complete darkness. Allowing you to check

your baby at any time of night.The night vision LEDs will activate automatically when the

camera detects that light levels are low.

Night Light

The camera has a calming night light included, you must use the parent unit (sold

separately) to turn on this night light. You will nd detailed instructions on how to adjust

the settings of your baby monitor in the instruction manual included with the LV-TW501

system.

PAIRING THE DEVICES

The camera must be paired (connected) to a monitor (parent unit not

included). The monitor comes with the LV-TW501 packaged system. Please see

our website at www.mylevava.com or call our support team at 1-866-946-7828 if you

cannot connect your camera with a monitor, or if you need to purchase a monitor.

1. Slide the power switch

on the right

hand side of the camera to the OFF position.

2. Cover the light sensor on the front of the

camera with your nger or a cloth.

3. Slide the power switch

on the camera

to the ON position.

4. With the monitor switched on, press and

hold the play/pause button

for two

seconds.

5. The pair icon

will appear on the

screen and the power LED on the camera will

blink for a few seconds.

6. Press the menu button

on the monitor to conrm the setting.

7. C1... OK! will appear when the camera and monitor are paired successfully and then

the video and audio will be transmitted automatically.

Note: If “C1...X” appears (pair failed) instead of “C1...OK!” you will have to remove all

sources of power from the camera and monitor and start the pairing process

over again.

Light Sensor

TROUBLESHOOTING

PROBLEM SOLUTION

Equipment does not function • Camera and/or monitor are not

switched on

• The battery is dead or defective

• The power adapters are not connected

No reception • Camera and monitor are not paired

• Camera is too far away from monitor

• The VOX sensitivity is set too low

Reception Interference (static) • The camera and monitor are too far apart

• The battery power is too low

• Other electronic devices are interfering

with the signal

• The camera or monitor are placed near too

many metal objects

Feedback (screeching, static) • The camera and monitor are too close

together

• The volume on the monitor is set too high

Picture works but there is no sound • Volume setting is too low

Picture is black and white • Night vision LEDs are ON

• Increase the amount of light in the room

being monitored

The rechargeable battery will not

charge

• The power adapters are not connected

• Battery pack is not plugged in inside the

battery compartment

• The monitor is not docked properly

Maintenance

• Clean the surfaces of the camera with a soft, u-free cloth

• If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to

not allow water into any openings

• Never use cleaning agents or solvents

SPECIFICATIONS

Camera Specications

Input Power...............................................................100 - 240 VAC, 50 - 60 Hz ~ 200mA

Output Power ............................................................6 VDC ~ 800mA

IR LEDs and Range .....................................................8 LEDs, 10 foot range

Range.........................................................................450 Feet Maximum

Frequency Range .......................................................2.4 GHz

Operable Temperature ...............................................32 ˚ F to 104 ˚ F (0 ˚ C to 40 ˚ C)

Transmission Power ...................................................15 ~17 dBm

FCC APPROVED

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment o

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorientorrelocatethereceivingantenna

• Increasetheseparationbetweentheequipmentandreceiver

• Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthe

receiver is connected

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp

• FCCLabelComplianceStatement

• ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowing

two conditions:

(1) This device may not cause harmful interference

(2) This device must accept any interference received, including interference

that may cause undesired operation

The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modications to this equipment. Such modications could void the user's

authority to operate the equipment.

SAFETY INSTRUCTIONS

Read and Keep Instructions: All the safety and operating instructions should

be read before the video baby monitor is operated.

Water and Moisture: This product is designed for indoor use only. The unit should not

be exposed to rain, moisture, dripping or splashing. No objects lled with liquid should

be place on top of, or beside the product, such as a glass or vase. This item should not be

used near water.

Non-Use Periods: Always unplug the AC adapters from the wall outlets during long

periods of non-use.

SAFETY INSTRUCTIONS

Ventilation: This baby monitor should not be used on a bed, sofa, rug or

similar surface that may block the ventilation openings, or be placed in an

enclosed area, such as a bookcase or drawer that may impede air ow.

Keep Away from Sources of Heat: This unit should not be exposed to direct heat

sources such as a candle, replace, radiator, heat register, stove or other appliance that

emits heat. The unit should not be left in direct sunlight.

Power Source: This unit should only be used with the AC power adapters included in this

package (rated 6V 800mA)

Damage Requiring Service: This unit should be serviced by qualied personnel only

when:

a. Objects have fallen or liquid has been spilled into the product

b. The units have been exposed to rain

c. The units do not appear to operate normally or exhibits a distinct change in

performance

d. The units have been dropped or the enclosure damaged

Caution: This product cannot replace responsible adult supervision of a child. You should

personally check your child’s activity at regular intervals.

STATEMENT ON REGULATION

These units are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning

the equipment o and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Operation with non-approved equipment or unshielded cables is likely to result in

interference to radio or TV reception. The user is cautioned that changes and modications

made to the equipment without the approval of manufacturer could void the user’s

authority to operate this equipment.

please visit www.MYLevana.com for:

Warranty information

Product Support

Contact information

User Manual Downloads

and much more!

visiter www.mylevana.com pour:

Informations de garantie

Support technique

informations de contact

Manuels d'utilisateur t

lé

chargeable

et beaucoup plus!

NOTES

CONSIGNES DE SÉCURITÉ

Ventilation: Ce moniteur bébé ne devrait pas être utilisé sur un lit, un

divan, un tapis ou une surface similaire qui pourrait bloquer les ouvertures de

ventilation, ou être placés dans un espace clos, tel qu’une bibliothèque ou un tiroir qui peut

empêcher l’écoulement de l’air.

Éviter les sources de chaleur : Cette unité ne devrait pas être exposée à des sources directes de

chaleur comme une bougie, cheminée, radiateur, un registre de chaleur, poêle ou autre appareil qui

émet de la chaleur. L’unité ne doit pas être laissée en plein soleil.

Source d’alimentation : Cette unité devrait être seulement utilisée avec les adaptateurs CA inclus

dans cet ensemble (évalué à 6V 800mA).

Dommages Exigeant le Service : Cette unité devrait être entretenue par le personnel qualié

seulement quand :

A. Des objets ont tombés ou du liquide a été renversé dans/sur le produit

B. Les unités ont été exposées à la pluie

C. Les unités ne semblent pas fonctionner normalement ou présentent un changement

notable de performance

D. Les unités ont été échappées ou le boîtier est endommagé

Attention: Ce produit ne peut remplacer la surveillance d’adultes responsables d’un enfant. Vous

devez vérier personnellement l’activité de votre enfant à intervalles réguliers.

DÉCLARATION SUR LE REGLEMENT

Ces unités sont conçues pour fournir une protection raisonnable contre les interférences nuisibles

dans une installation résidentielle. Cet équipement génère, utilise et peut émettre des fréquences

radio et s’il n’est pas installé et utilisé conformément aux instructions, peut causer des interférences

nuisibles aux communications radio. Cependant, il n’existe aucune garantie que des interférences ne

se produiront pas dans une installation particulière. Si cet équipement provoque des interférences

nuisibles à la réception radio ou de télévision, qui peut être déterminé en mettant l’équipement

hors tension, l’utilisateur est encouragé à essayer de corriger l’interférence par un ou plusieurs des

mesures suivantes:

• Réorienter ou déplacer l’antenne antenne

• Augmenter la séparation entre le matériel et le récepteur

• Connecter l’équipement à une prise sur un circuit diérent de celui auquel le récepteur

est branché

• Consulter le revendeur ou un technicien radio / TV

L’utilisation d’équipement non approuvé ou de câbles non blindés risque d’entraîner des interférences dans la

réception radio ou TV. L’utilisateur est averti que les changements et les modications apportées à l’équipement

sans l’approbation du fabricant peut annuler l’autorisation de l’utilisateur à utiliser cet équipement.

APPROUVÉ PAR LA FCC

Cet équipement a été testé et il est considéré conforme

aux conditions restrictives relatives à un appareil numérique

de classe B, en vertu de la section 15 de la réglementation de la FCC. Ces

conditions restrictives sont conçues pour fournir une protection raisonnable

contre les interférences nuisibles dans le cadre d’une installation résidentielle. Cet équipement

produit, utilise et peut émettre de l’énergie sous forme de radiofréquences. S’il n’est pas utilisé

conformément aux instructions, il peut produire des interférences nuisibles aux communications

radio. Toutefois, rien ne garantit que le brouillage ne se produise pas dans une installation

donnée. Si cet équipement produit des interférences nuisibles pour la réception des ondes radio

ou télévision, ce qui peut être déterminé en allumant et éteignant l’équipement, l’utilisateur peut

essayer de corriger les interférences en prenant une ou plusieurs des mesures suivantes :

Réorientez ou déplacez l’antenne de réception.

• Augmentezladistanceséparantl’appareildurécepteur

• Raccordezl’appareilàuneprisedecourantsituéesuruncircuitdiérentdeceluidurécepteur.

• Consulterledétaillantouuntechnicienqualiéenradio/télévisionpourobtenirdel’aide.

• ÉtiquettededéclarationdeconformitédelaFCC:

• Cetappareilestconformeàlapartie15durèglementdelaFCC.Lefonctionnementdecet

appareil est sujet aux conditions suivantes :

(1) cet équipement ne doit pas causer d’interférences nuisibles et

(2) cet équipement doit accepter toute interférence reçue, y compris les

interférences capables de causer un mauvais fonctionnement.

Remarque : Le fabricant n’est responsable d’aucune interférence radio ou TV causée par des

modications non autorisées à cet équipement. De telles modications pourraient annuler

l’autorité de l’utilisateur à opérer l’équipement.

CONSIGNES DE SÉCURITÉ

Lisez et conservez les instructions : Toutes les consignes de sécurité et de fonctionnement

doivent être lues avant que le moniteur vidéo peut être fonctionné.

Eau et humidité: Ce produit est conçu pour une utilisation à lèintérieur. L’unité ne doit pas être

exposée à la pluie, l’humidité, des gouttes ou des éclaboussures. Aucun objet rempli de liquide

ne doit être placé sur le dessus ou à côté du produit, tel qu’un verre ou un vase. Ce produit ne doit

pas être utilisé près de l’eau

Periode de non utilisation : Débranchez les adaptateurs de la prise murale pendant de longues

périodes de non-utilisation.

SPÉCIFICATIONS

Spécications de la caméra

Puissance d’entrée ......................................................100 - 240 VAC, 50 - 60 Hz ~ 200mA

Puissance d’entrée ......................................................6 VDC ~ 800mA

LED IR et gamme ........................................................8 LED, 10 pieds

Gamme ......................................................................450 Pieds Max.

Gamme de fréquence .................................................2.4 GHz

Température operable ................................................32 ˚ F à 104 ˚ F (0 ˚ C à 40 ˚ C)

Pouvoir de transmission .............................................15 ~17 dBm

DÉPANNAGE

PROBLÈME SOLUTION

L’équipement ne

fonctionne pas

• L’unité n’a pas été allumée

• La pile est déchargée ou défectueuse

• L’adaptateur AC / DC n’a pas été connecté

Pas de réception • Les unités ne sont pas jumelées

• La caméra est trop loin du moniteur

• La sensibilité VOX est réglé trop bas

Interférence de la

réception (brouillage)

• La caméra est trop loin du moniteur

• La pile est déchargée ou défectueuse

• D’autres appareils électroniques interfèrent avec le

signal

• La caméra et le moniteur sont placés à proximité de

trop d’objets métalliques

Eet de rétroaction «

feedback » (bruyant,

brouillage)

• la caméra et le moniteur sont trop proche ensemble

• Le volume sur le moniteur est réglé trop haut

Bruits • La pile est trop faible

L’image fonctionne mais

il n’y a pas de son

• Le volume est trop bas

L’image est en noir et

blanc

• Les LED de vision nocturne sont activées

• La pile n’est pas branché à l’intérieure du

compartiment de la pile.

• Le moniteur n’est pas placé correctement sur la base

La pile rechargeable ne

se charge pas

• Les adaptateurs de courant ne sont pas connectés

• La pile n’est pas branché à l’intérieur du

compartiment à piles

• Le moniteur n’est pas connecté correctement

Entretien

• Nettoyer les surfaces de la caméra et le moniteur avec un chion doux non

pelucheux

• Si les unités sont sales, utilisez un chion légèrement humide pour nettoyer les

surfaces, en prenant soin de ne pas permettre à l’eau d’entrer dans les ouvertures

• N’utilisez jamais de détergents ou de solvants

La page est en cours de chargement...

Levana LV-TW501-C Manuel utilisateur

Marque: Levana

Modèle: LV-TW501-C

Catégorie: Moniteurs vidéo bébé

Taper: Manuel utilisateur

Ce manuel convient également à

Safe’N See

Télécharger le PDF

rapport

dans d''autres langues

English: Levana LV-TW501-C User manual

Levana LV-TW501-C Manuel utilisateur

Ce manuel convient également à

Levana LV-TW501-C Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents