Sony MDX-C800REC Manuel utilisateur

Operating Instructions

Mode d’emploi

Manual de instrucciones

US

FM/AM

MiniDisc Recorder

MDX-C800REC

For installation and connections, see the supplied installation/connections manual.

Owner’s Record

The model and serial numbers are located on the bottom of the unit.

Record the serial number in the space provided below.

Refer to these numbers whenever you call upon your Sony dealer regarding this

product.

Model No. MDX-C800REC Serial No.

FR

ES

FM/AM MiniDisc Recorder MDX-C800REC

2

Warning

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses, and can radiate

radio frequency energy and, if not installed

and used in accordance with the instructions,

may cause harmful interference to radio

communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the interference

by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the

equipment and receiver.

— Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

— Consult the dealer or an experienced radio/

TV technician for help.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate

this equipment.

CAUTION

The use of optical instruments with this

product will increase eye hazard.

Welcome !

Thank you for purchasing the Sony MiniDisc

Recorder. This unit lets you enjoy a variety of

features using the following controller

accessories:

Optional accessories

Rotary commander RM-X4S

Card remote commander RM-X91

In addition to the MD playback and radio

operations, you can expand your system by

connecting optional CD/MD units*

1

.

When you play a CD TEXT disc*

2

on a

connected optional CD unit with the CD TEXT

function, the CD TEXT information will appear

on the display.

*

1

You can connect MD changers, CD changers, MD

players, or CD players.

*

2

A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name

and track names.

This information is recorded on the disc.

Precautions

•If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

•If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

•If your car is equipped with a power

antenna, it will extend automatically while

the unit is operating.

•Do not use the CUSTOM FILE feature while

driving, or perform any other function which

could divert your attention from the road.

•Do not edit the MD while driving.

•Make sure that the vehicle’s battery and

charging system are functioning properly

prior to using Timer-off recording and the

REC Continue mode function. Under certain

unusual conditions, use of the Timer-off

recording and the REC Continue mode

function could cause the vehicle’s battery to

be discharged to a degree that would prevent

the vehicle from starting. For the maximum

current drain per connection, refer to the

“connection diagram” of the supplied

installation/connections.

3

•Be careful if your car is equipped with an

electric current detector-type car-alarm

system: when Timer-off recording or REC

Continue mode ends, the alarm may

mistakenly go off, detecting a change in the

car’s electrical current.

•When an optional TV/video unit is

connected, the monitor stays on during

Timer-off recording or REC Continue mode.

Turn the monitor off before leaving the car to

reduce the likelihood of battery drain or

theft.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

Notes on recording

If you are going to make a recording that

cannot be done over, it is recommended to

make a test recording before actual recording.

IN NO EVENT SHALL SELLER BE LIABLE

FOR ANY DIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGE OF ANY

NATURE, OR LOSSES OR EXPENSES

RESULTING FROM ANY DEFECTIVE

PRODUCT OR THE USE OF ANY

PRODUCT.

Moisture condensation

On a rainy day or in a very damp area,

moisture may condense on the lenses inside

the unit. Should this occur, the unit will not

operate properly. In such a case, remove the

disc and wait for about an hour until the

moisture has evaporated.

To maintain high sound quality

If you have drink holders near your audio

equipment, be careful not to splash juice or

other soft drinks onto the unit and MD. Sugary

residues on the unit or MD may contaminate

the lenses inside the unit, reduce the sound

quality, or prevent sound reproduction

altogether.

Notes on MDs

Since the disc itself is housed in a cartridge,

free from accidental contact with your fingers

and dust, MDs can withstand a certain degree

of rough handling. However, dirt or dust on

the surface of the cartridge or a warped

cartridge may cause a malfunction. Observe

the following for best results.

Never touch the surface of the disc itself by

deliberately opening the shutter on the

cartridge.

When you eject the MD, the shutter may be

open. In such a case, close the shutter

immediately.

Do not expose the MD to direct sunlight or

heat sources such as hot-air ducts. Do not leave

it in a car parked in direct sunlight where there

can be a considerable rise in temperature.

Make sure the MD is not left on the dashboard

or rear tray of a car, etc. where the temperature

can also be excessive.

4

Notes on attaching labels

Be sure to attach labels on cartridges correctly,

as failing to do so may cause the MD to

become stuck in the unit.

•Attach the label in a suitable position.

•Remove old labels before putting new ones

on.

•Replace labels that are beginning to peel

away from the MD.

Cleaning

Wipe the surface of the cartridge from time to

time with a soft, dry cloth.

Protecting a recorded MD

To record-protect an MD, slide open the tab at

the side of the MD.

With the tab in this position, the MD cannot be

recorded on. To record on the MD, slide the

tab closed.

Slide open the tab.

Tab

5

Table of Contents

Location of controls ............................................. 6

Getting Started

Resetting the unit ................................................. 8

Detaching the front panel ................................... 8

Turning the unit on/off ....................................... 9

How to use the menu

— An introductive guide ............................... 9

Setting the clock ................................................... 9

MD Player

CD/MD Unit (optional)

Playing a disc ...................................................... 10

Playing tracks repeatedly

— Repeat Play ............................................... 12

Playing tracks in random order

— Shuffle Play ............................................... 13

Creating a program

— Program Memory .................................... 13

Labeling a CD

— Disc Memo* .............................................. 15

Locating a disc by name

— List-up* ..................................................... 17

* Functions available with optional CD/MD unit.

Recording on an MD

Recording from a CD or MD by the track

— Track recording ........................................ 18

Recording a whole CD or MD

— Disc recording .......................................... 19

Recording from a CD or MD in a specific track

order

— Program recording ................................... 20

Recording a radio program

— Time Machine recording ......................... 21

Editing an MD

Erasing a recording

— Erase function........................................... 22

Dividing recorded tracks

— Divide function ........................................ 24

Combining recorded tracks

— Combine function .................................... 25

Moving recorded tracks

— Move function .......................................... 26

Labeling an MD .................................................. 27

Radio

Storing stations automatically

— Best Tuning Memory (BTM)................... 29

Storing only the desired stations ..................... 29

Receiving the stored stations............................ 30

Storing station names

— Station Memo ........................................... 31

Locating a station by name

— List-up ....................................................... 32

Other Functions

Labeling the rotary commander ...................... 32

Using the rotary commander ........................... 33

Adjusting the sound characteristics ................ 34

Quickly attenuating the sound ........................ 34

Changing the sound and display settings ...... 35

Selecting the spectrum analyzer ...................... 36

TV/Video (optional)

Watching the TV ................................................. 36

Watching a video................................................ 36

Storing TV channels automatically ................. 37

Storing only the desired TV channels ............. 37

Storing the TV channel names ......................... 38

Displaying the information stored

on a disc.......................................................... 38

Watching the TV or video while listening

to a CD or MD

— Simultaneous Play ................................... 39

Additional Information

Maintenance........................................................ 40

Removing the unit ............................................. 41

System limitations of MDs................................ 41

Specifications ...................................................... 43

Troubleshooting guide ...................................... 44

6

Location of controls

Refer to the pages listed for details.

1 Volume control dial

2 MENU button 9, 11, 13, 14, 15, 16, 23,

24, 25, 26, 27, 28, 29, 30, 31, 35, 36, 37,

39

3 DISC/PRST +/– (cursor up/down) buttons

9, 11, 13, 14, 15, 16, 17, 23, 24, 25, 26,

27, 28, 29, 30, 31, 32, 35, 36, 37, 39

During CD/MD playback:

Disc change 12, 19

During radio reception:

Preset stations select 30

4

Z (eject) button (located on the front side

of the unit behind the front panel) 10, 11

5 DSPL (display mode change) button

11, 16, 22, 27

6 LIST button 16, 31

List-up 17, 32, 38

7 SOURCE (Radio/CD/MD/TV) button

7, 9, 10, 11, 13, 16, 29, 30, 36, 37, 39

8 Display window

9 Reset button (located on the front side of

the unit behind the front panel) 8

0 OPEN button 8, 10, 11, 18, 19, 20, 21, 40

qa MD REC button 17, 18, 19, 20, 21

qs SOUND button 34

qd OFF button* 6, 8, 9, 11

qf SEEK/AMS –/+ (cursor left/right) buttons

9, 11, 13, 14, 16, 23, 24, 25, 26, 27, 28,

30, 31, 34, 35, 36, 39

Automatic Music Sensor 12, 18, 19

Manual Search 12

Seek 29, 30, 37

qg ENTER button 9, 11, 13, 14, 15, 16, 17,

23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 35,

36, 37, 39

qh MODE button

During CD or MD playback:

CD/MD unit select 11, 16

During radio reception:

Band select 29, 30

During TV reception:

Unit select 36

qj Receptor for the card remote

commander

qk Number buttons

During radio reception:

Preset number select 29, 30

During CD/MD playback:

(1) REP 12, 22

(2) SHUF 13, 22

(3) PGM 14

During TV reception:

Preset number select 37

ql REC MENU button 18, 19, 20, 21, 22

w; REC STOP button 18, 20, 21

* Warning when installing in a car

without ACC (accessory) position on

the ignition switch

Be sure to press (OFF) on the unit for 2

seconds to turn off the clock display after

turning off the ignition.

When you press (OFF) only momentarily,

the clock display does not turn off and this

causes battery drain.

MDX-C800REC

D

I

S

C

+

P

R

S

T

+

D

I

S

C

–

P

R

S

T

-

LIST

DSPL

OFF

ENTER

MENU

SOUND

SOURCE

-

SEEK/AMS

OPEN

MODE

MD REC

REC STOP

REC MENU

Xz

x

REP

SHUF PGM

1 2 3 4 56

7

Location of controls

Card remote commander RM-X91 (optional)

The corresponding buttons of the card

remote commander control the same

functions as those on this unit.

1 OFF button

2 MENU button

3 SOURCE button

4 SEEK/AMS (B/b) buttons

5 SOUND button

6 DSPL button

7 ATT button

8 LIST button

9 DISC/PRST (V/v) buttons

q; ENTER button

qa MODE button

qs VOL buttons

OFF

SEEK SEEK

OPEN/CLOSE

MENU LIST

SOUND

ENTER

DISC

SOURCE

DSPL MODE

VOLATT

Notes

• A unit turned off by pressing (OFF) for 2 seconds cannot be operated with the card remote commander

unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.

• Do not leave the card remote commander where it can be exposed to direct sunlight such as on a

dashboard or the steering wheel, etc. The card remote commander may be deformed by the heat.

• The MiniDisc recorder may not operate properly with the card remote commander in direct sunlight. In

such a case, hold the card remote commander close to the unit’s receptor.

8

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Remove the front panel and press the reset

button with a pointed object, such as a ball-

point pen.

Reset button

Note

Pressing the reset button will erase the clock

setting and some stored contents such as the

station memo.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

1 Press (OFF).

2 Press (OPEN), then slide the front panel

to the right side, and pull out the left

side of the front panel.

Notes

• Do not put anything on the inner surface of the

front panel.

• Be sure not to drop the panel when detaching it

from the unit.

• If you detach the panel while the unit is still

turned on, the power will turn off automatically

to prevent the speakers from being damaged.

• When carrying the front panel with you, use the

supplied front panel case.

1

2

Attaching the front panel

Place the hole A in the front panel onto the

spindle B on the unit as illustrated, then push

the left side in.

x

Notes

• Be careful not to attach the front panel upside

down.

• Do not press the front panel too hard against the

unit when attaching it.

• Do not press too hard or put excessive pressure

on the display window of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight or

where there may be a considerable rise in

temperature.

Caution alarm

If you turn the ignition switch to the OFF

position without removing the front panel, the

caution alarm will beep for a few seconds.

A

B

9

Turning the unit on/off

Turning on the unit

Press (SOURCE) or insert an MD into the unit.

For details on operation, refer to page 10 (MD/

CD) and page 29 (radio).

Turning off the unit

Press (OFF) to stop MD/CD playback or FM/

AM reception (the key illumination and

display remain on).

Press (OFF) for 2 seconds to completely turn

off the unit.

Note

If your car has no ACC position on the ignition

switch, be sure to turn the unit off by pressing

(OFF) for 2 seconds to avoid car battery drain.

How to use the menu

— An introductive guide

One operational feature of this unit is selecting

functions/settings from a menu.

After entering Menu mode, you move the

cursor to select each item with the following

buttons:

(DISC/PRST)

(+): to select upwards

(SEEK/AMS)

(+): to select

rightwards

(SEEK/AMS)

(–): to select

leftwards

(DISC/PRST)

(–): to select downwards

SOURCE

Setting the clock

The clock uses a 12-hour digital indication.

Example: To set the clock to 10:08

1 Press (MENU), then press either side of

(DISC/PRST) repeatedly until “Clock”

appears.

1 Press (ENTER).

The hour indication flashes.

2 Press either side of (DISC/PRST) to set

the hour.

3 Press the (+) side of (SEEK/AMS).

The minute indication flashes.

4 Press either side of (DISC/PRST) to set

the minute.

2 Press (ENTER).

The clock starts.

After the clock setting is completed, the

display returns to normal play mode.

Note

In Menu mode the “v” in the left of the display

indicates the selectable buttons of

(DISC/PRST) and (SEEK/AMS).

10

MD Player

CD/MD Unit (optional)

In addition to playing an MD with this unit

alone, you can also control external CD/MD

units.

Note

If you connect an optional CD unit with the CD

TEXT function, the CD TEXT information will

appear on the display when you play a CD TEXT

disc.

Playing a disc

Playing an MD (with this unit)

1 Press (OPEN) and insert the MD.

2 Close the front panel.

Playback starts automatically.

If an MD is already inserted, press (SOURCE)

repeatedly until “MD” appears to start

playback.

B Radio (band indication)

MD b CD* b

* If the corresponding optional equipment is not

connected, this item will not appear.

The title of the MD* and the track title* will

appear on the display window, then the

playing time will appear.

MD indication Disc name*/track title*

* Only if these titles are prerecorded on the MD

(Some characters cannot be displayed).

Elapsed playing time

Z

Notes

• If your car has no ACC (accessory) position on the

ignition switch, be sure to turn on the unit

before you set the clock (see page 9).

• In the initial setting, the clock indication appears

while the unit is turned off.

When D.INFO mode is set to ON, the time is

always displayed (page 35).

Track number

Labeled side up

11

To Press

Stop playback (OFF)

Eject the MD (OPEN) then Z

Note

When the last track on the MD is over, the track

number indication returns to “1,” and playback

restarts from the first track of the MD.

With optional unit connected, the MD in MD unit

2 will be played from the beginning, after the MD

in the main unit is played to the end.

Playing a CD or MD

(with optional CD/MD unit)

1 Press (SOURCE) repeatedly to select

“CD” or “MD.”

B Radio (band indication)

MD b CD* b

* This item will not appear if the optional CD

unit is not connected.

2 Press (MODE) until the desired unit

appears.

CD/MD playback starts.

Changing the display item

Each time you press (DSPL) during MD, CD,

or CD TEXT disc playback, the item changes as

follows:

V

Disc name*

1

/Artist’s name*

2

V

Track name*

3

*

1

If you have not labeled the CD or CD TEXT disc

(“Labeling a CD” on page 15), or if there is no

disc name prerecorded on the MD, “NO

D.Name” appears on the display.

*

2

If you play a CD TEXT disc, the artist’s name

appears on the display after the disc name.

(Only for CD TEXT discs with the artist’s name.)

*

3

If the track name of a CD TEXT disc or MD is not

prerecorded, “NO T.Name” appears on the

display.

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the items are

scrolled on the display one by one in order.

Notes

• If you use personalized labels, they will always

take priority over the original CD TEXT

information when such information is displayed.

• Some letters cannot be displayed during MD or

CD TEXT playback.

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 35.)

Automatically scrolling a disc name

— Auto Scroll

If the disc name, artist name, or track name on

an MD or a CD TEXT disc exceeds 10

characters and the Auto Scroll function is on,

information automatically scrolls across the

display as follows:

• The disc name appears when the disc has

changed (if the disc name is selected as the

display item).

• The track name appears when the track has

changed (if the track name is selected as the

display item).

• The disc or track name appears depending on

the setting when you press (SOURCE) to select

an MD or CD TEXT disc.

If you press (DSPL) to change the display

item, the disc or track name of the MD or CD

TEXT disc is scrolled automatically whether

you set the function on or off.

1 During playback, press (MENU).

2 Press either side of (DISC/PRST)

repeatedly until “A.Scrl off” appears.

3 Press the (+) side of (SEEK/AMS) to select

“A.Scrl on.”

4 Press (ENTER).

To cancel Auto Scroll, select “A.Scrl off” in

step 3.

12

LIST

ENTER

-

SEEK/AMS

MODE

REP

SHUF PGM

1 2 3 4 56

Note

For some CD TEXT discs with very many characters,

the following cases may happen:

— Some of the characters are not displayed.

— The information does not scroll.

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press either side of

(SEEK/AMS) momentarily for each track

you want to skip.

SOURCE

Locating a specific point in a track

— Manual Search

During playback, press and hold either

side of (SEEK/AMS). Release when you

have found the desired point.

SOURCE

Note

If “

” or “ ” appears on the

display, you have reached the beginning or the

end of the disc and you cannot go any further.

Locating a disc

— Disc Selection

When an optional CD/MD unit is

connected, press either side of

(DISC/PRST) to select the desired disc.

The desired disc on the current optional

CD/MD unit begins playback.

To locate

preceding

tracks

To locate

succeeding

tracks

To search

forward

To search

backward

Playing tracks repeatedly

— Repeat Play

The MD in the main unit will automatically

repeat itself when it reaches the end. As repeat

play, you can select:

•Repeat 1 — to repeat a track.

•Repeat 2 — to repeat a disc in the optional

CD/MD unit.

During playback, press (1) (REP)

repeatedly until the desired setting

appears on the display.

B Repeat 1 B Repeat 2*

Repeat off b

* “Repeat 2” is only available when you

connect one or more optional CD/MD units.

Repeat Play starts.

To return to normal play mode, select “Repeat

off.”

13

LIST

ENTER

-

SEEK/AMS

MODE

REP

SHUF PGM

1 2 3 4 56

Playing tracks in random

order — Shuffle Play

You can select:

•Shuf 1 — to play the tracks on the current

disc in random order.

•Shuf 2 — to play the tracks in the current

optional CD/MD unit in random order.

•Shuf all — to play all the tracks in all the

connected CD/MD units (including this unit)

in random order.

During playback, press (2) (SHUF)

repeatedly until the desired setting

appears on the display.

B Shuf 1 B Shuf 2*

1

B Shuf all*

2

Shuf off b

*

1

“Shuf 2” is only available when you connect

one or more optional CD/MD units.

*

2

“Shuf all” is only available when you

connect one or more optional MD units, or

when you connect two or more optional CD

units.

Shuffle Play starts.

To return to normal play mode, select “Shuf

off.”

Creating a program

— Program Memory

You can choose your favorite tracks from an

MD/CD on the main and connected CD/MD

units, and create your own program to play

them in the order of your choice. The program

will be stored in the unit’s memory. You can

select up to 24 tracks for a program and one

program per each unit with this function.

1 During CD/MD playback, press (MENU),

then press either side of (DISC/PRST)

repeatedly until “PGM Sel” appears.

2 Press (ENTER).

Program edit mode

3 Select the track you want.

1 Press (SOURCE) repeatedly to select

this unit (“MD” or “MD1”) or optional

CD/MD units.

B CD1* B CD2* B ...

... b MD2* b MD1 b

* If the corresponding optional equipment

is not connected, these items will not

appear.

2 Press either side of (DISC/PRST) for

more than 2 seconds until the desired

disc appears.

3 Press either side of (SEEK/AMS)

repeatedly to select the track.

continue to next page t

Playing disc No.

Playing unitPlaying track No.

Program No.

14

Program No.

4 Press (ENTER) momentarily.

x

5 To continue entering tracks, repeat steps

3 and 4.

6 When you finish entering tracks, press

(MENU) twice.

Notes

•“**Wait**” appears on the display while the unit

is reading the data, or if a disc has not been

inserted into the unit.

•“*Mem FULL*” appears on the display if you try

to enter more than 24 tracks into a program.

• Repeat play and shuffle play will be suspended

until Program Edit mode is over.

Playing the stored program

Changing the disc order on the CD/MD unit

will not affect program memory play.

During CD/MD playback, press (3) (PGM)

to play the stored program.

PGM on y PGM off

To return to normal play mode, select “PGM

off.”

Notes

• “NO Data” appears on the display if no track is

stored in the program.

• If a track stored in program memory is not on a

disc in the magazine, the track will be skipped.

• If the discs in the magazine contain no tracks

stored in program memory, or if the program

information has not been loaded yet, “Not

Ready” appears.

Erasing an entire program

1 During CD/MD playback, press (MENU),

then press either side of (DISC/PRST)

repeatedly until “PGM Sel” appears.

2 Press (ENTER).

3 Press the (–) side of (DISC/PRST)

repeatedly until “All Erase” appears.

4 Press (ENTER) for 2 seconds.

The entire program is erased.

5 Press (MENU) twice.

Adding tracks to the program

1 During CD/MD playback, press (MENU),

then press either side of (DISC/PRST)

repeatedly until “PGM Sel” appears.

2 Press (ENTER).

When adding a track to the end of a

program, skip step 3.

3 Press either side of (DISC/PRST)

repeatedly to select the program number

where you want to insert a new track.

4 Press (SEEK/AMS) to select the new track.

15

5 Press (ENTER).

The selected track is inserted at that

program number, and the succeeding

tracks are renumbered.

To continue inserting tracks, repeat steps 3

to 5.

6 Press (MENU) twice.

Note

Once all 24 slots have been filled, “*Mem FULL*”

appears on the display, and you cannot insert

more tracks.

Erasing tracks in a program

1 During CD/MD playback, press (MENU),

then press either side of (DISC/PRST)

repeatedly until “PGM Sel” appears.

2 Press (ENTER).

3 Press either side of (DISC/PRST)

repeatedly to select the program with

the track number you want to erase.

4 Press (ENTER) for 2 seconds.

The selected track is erased, and the

succeeding tracks are renumbered.

5 Press (MENU) twice.

Labeling a CD — Disc Memo

(For a CD unit with the CUSTOM FILE

function)

You can label each disc with a personalized

name. You can enter up to 8 characters for a

disc. If you label a CD, you can locate the disc

by name (page 17).

Caution

Do not use the CUSTOM FILE feature while

driving, or perform any other function which

could divert your attention from the road.

1 Start playing the disc you want to label.

2 Press (MENU), then press either side of

(DISC/PRST) repeatedly until “Name

Edit” appears.

3 Press (ENTER).

Name Edit mode

The unit will repeat the disc during the

labeling procedure.

4 Enter the characters.

1 Press the (+) side of (DISC/PRST)

repeatedly to select the desired

characters.

(A t B t C t ··· Z t 0 t 1 t 2 t

··· 9 t + t – t * t / t \ t > t <

t . t )

If you press the (–) side of (DISC/PRST)

repeatedly, the characters will appear in

reverse order.

If you want to put a blank space

between characters, select “ .”

continue to next page t

16

Note

Some letters cannot be displayed during MD or CD

TEXT disc playback.

Erasing the disc memo

1 Press (SOURCE) repeatedly to select

“CD.”

2 Press (MODE) repeatedly to select the CD

unit with the CUSTOM FILE function.

3 Press (MENU), then press either side of

(DISC/PRST) repeatedly until “Name Del”

appears.

4 Press (ENTER).

5 Press either side of (DISC/PRST)

repeatedly to select the disc name you

want to erase.

The stored names will appear from the

earliest ones entered.

6 Press (ENTER) for 2 seconds.

The name is erased.

Repeat steps 5 and 6 if you want to erase

other names.

7 Press (MENU) twice.

The unit returns to normal CD play mode.

Notes

• To erase the disc memo, play a CD on the CD unit

in which the disc memo you want to erase is

stored.

• When a personalized label for a CD TEXT disc is

erased, the original CD TEXT information will

appear on the display.

2 Press the (+) side of (SEEK/AMS) after

locating the desired character.

If you press the (–) side of (SEEK/AMS),

you can move back to the left.

3 Repeat steps 1 and 2 to enter the

entire name.

5 To return to normal CD play mode, press

(ENTER).

Tips

• To erase or correct a name, enter “

” for each

character.

• There is another way to start labeling a CD: Press

(LIST) for 2 seconds instead of performing steps

2 and 3. You can also complete the operation by

pressing (LIST) for 2 seconds instead of step 5.

• You can label CDs on a unit without the CUSTOM

FILE function if that unit is connected along with

a CD unit that has the function. The disc name

will be stored in the memory of the CD unit with

the CUSTOM FILE function.

Note

Repeat play, shuffle play, and program play will be

suspended until Name Edit mode is over.

Displaying the disc memo

Press (DSPL) during CD or CD TEXT disc

playback.

Disc memo

Each time you press (DSPL) during CD or

CD TEXT disc playback, the item changes

as follows:

V

Disc memo name*

1

V

Track name*

2

*

1

If you use personalized labels, they will

always take priority over the original CD

TEXT information when such information is

displayed.

*

2

If you connect an optional CD unit with the

CD TEXT function, the CD TEXT information

will appear on the display when you play a

CD TEXT disc.

17

Locating a disc by name

— List-up (For a CD unit with the CD TEXT

function/CUSTOM FILE function or an MD

unit)

You can use this function for discs that have

been assigned custom names or for CD TEXT

discs. You can locate the disc by

— its custom name: when you assign a name

for a CD or an MD using a CD unit with the

CUSTOM FILE function or an MD unit.

(For information on disc names, see

“Labelling a CD” and “Labelling an MD”

on pages 15 and 27).

— the CD TEXT information: when you play a

CD TEXT disc on a CD unit with the CD

TEXT function.

1 Press (LIST).

The name assigned to the current disc

appears on the display.

2 Press either side of (DISC/PRST)

repeatedly until you find the desired

disc.

3 Press (ENTER) to play the disc.

Notes

• When using the card remote commander, press

(LIST) to return to normal play mode. When

operating just by the unit’s button, the display

returns to normal play mode after 5 seconds.

• The track names are not displayed during MD or

CD TEXT disc playback.

• If there are no discs on the CD/MD unit, “NO

Disc” appears on the display.

• If a disc has not been assigned a custom name,

“********” appears on the display.

• If you use personalized labels, they will always

take priority over the original CD TEXT

information when such information is displayed.

• Some letters cannot be displayed during MD or

CD TEXT disc playback.

• If the disc information has not been read yet by

the unit, “?” is displayed.

• If an optional TV system is connected, the disc

name appears on the display of the TV system

but not on the unit’s display.

Recording on an MD

You can record individual tracks/discs or

programed tracks played on a connected CD/

MD unit onto the MD on this unit. You can

also record a radio program with the “Time

Machine recording” feature.

Notes on recording

• When the whole playback time of the CD/MD is

longer than the remaining recordable time of

the MD, recording will stop when the recordable

MD becomes full.

• A recording may fail if there is too much

difference in temperature between the unit and

the MD.

• Recorded sound may drop out if you perform

recording while the unit is subject to excessive

vibration (such as when driving on a rough road,

etc.).

• Once you finish recording on or editing the MD,

be sure to eject the MD before you turn off the

ignition or disconnect the power-supply leads of

the unit.

Recording is completed when the unit updates

the TOC (Table of Contents) information and

then the MD is ejected. The lamp located at the

bottom of the MD slot flashes during updating

of the TOC information.

• You cannot perform the following operations

during recording or recording stand-by:

—selecting another track*

—selecting another radio program*

—ejecting an MD

—labeling an MD

—selecting Menu mode.

* Unselectable only during recording

• “Protected” appears when the tab for record-

protection is open.

• Repeat play, shuffle play, and program play will

be canceled when (MD REC) is pressed.

Tip

The unit automatically locates the end of the MD’s

recorded section and starts to record from that

point.

18

Information of the playing CD

Recording from a CD or

MD by the track

— Track recording

1 Press (OPEN) and insert the MD to be

recorded on.

(See “Playing a disc” on page 10.)

2 Play the CD or MD from which you want

to record.

3 Press (MD REC).

The unit stands by for recording with “z”

flashing and the buttons for recording

((MD REC), (REC STOP), and (REC MENU))

lit in amber.

4 Press (REC MENU) repeatedly until

“Track. REC” appears.

Each time you press (REC MENU),

recording mode changes as follows:

B Track. REC B Disc. REC

Normal REC b PGM. REC* b

* If you did not create a program, this item will

not appear.

If you want the actual recording to start

from the point on the track where you press

(MD REC) next, select “Normal REC” in

this step.

5 Press either side of (SEEK/AMS)

repeatedly to select the track you want

to record.

Remaining recordable time

Information of the playing CD

6 Press (MD REC) again to start recording.

The unit locates the beginning of the

selected track and starts recording.

Then “z” stops flashing and the buttons for

recording ((MD REC), (REC STOP), and

(REC MENU)) light in red.

When the recording of the track is

completed, the unit beeps and

automatically stands by for further

recording while the CD or MD continues to

play.

To cancel the recording or recording stand-by,

press (REC STOP).

Inserting the MD to record upon

afterwards

You can still start recording even if a CD or

MD in the connected CD/MD unit is already

playing and an MD is yet to be inserted into

this MD recorder.

1 Press (MD REC).

2 Insert an MD while “REC NO Disc” is

displayed (within 10 seconds after

step 1).

3 Press (REC MENU) repeatedly until

“Track. REC” appears.

4 Press (MD REC) again to start recording.

Note

Be sure to insert an MD while “REC NO Disc” is

displayed. If the indication disappears, recording

stand-by is canceled.

MD’s track No.

MD’s elapsed

recording time

19

Recording a whole CD or

MD — Disc recording

1 Press (OPEN) and insert the MD to be

recorded on.

(See “Playing a disc” on page 10.)

2 Play the CD or MD from which you want

to record.

3 Press (MD REC).

The unit stands by for recording with “z”

flashing and the buttons for recording

((MD REC), (REC STOP), and (REC MENU))

lit in amber.

4 Press (REC MENU) repeatedly until “Disc.

REC” appears.

5 Press either side of (DISC/PRST)

repeatedly to select the disc from which

you want to record.

6 Press either side of (SEEK/AMS)

repeatedly to select the track from which

you want to start recording.

If you want to record the whole disc, be

sure to choose the first track.

7 Press (MD REC) again to start recording.

The recording starts from the beginning of

the currently playing track.

Then “z” stops flashing and the buttons for

recording ((MD REC), (REC STOP), and

(REC MENU)) light in red.

continue to next page t

Continuing recording after turning

the ignition off

— REC Continue mode

1 Press (OPEN) and insert the MD to be

recorded on.

2 Play the CD or MD from which you want

to record.

3 Press (MD REC).

4 Press (REC MENU) repeatedly to select

“Disc. REC,” “Track. REC,” or “PGM. REC.”

5 Press (MD REC) again to start recording.

6 Press (REC MENU) repeatedly until

“Continue on” appears.

Recording continue indication

7 Turn the ignition off and detach the

front panel before you leave the car.

During REC Continue mode, the unit keeps

beeping to indicate the state of the unit, and

stops beeping when recording is

completed. When you turn the ignition to

the ACC position and attach the front panel

again, “REC Complete!” appears on the

display if recording is completed

successfully.

Notes

• Frequent use of REC Continue mode feature may

cause battery drain. Make sure that the battery is

well charged.

• Be sure not to start the engine of the car again

during REC Continue mode. Recording may fail.

• When an optional TV/video unit is connected,

the monitor stays on during Timer-off recording

or REC Continue mode. Turn the monitor off

before leaving the car to reduce the likelihood of

battery drain or theft.

20

When the recording of all the following

tracks are over, the unit beeps and

automatically stands by for further

recording while the CD or MD continues to

play.

To cancel the recording or recording stand-by,

press (REC STOP).

Tip

You can continue recording even after turning off

the ignition to leave the car (see “Continuing

recording after turning the ignition off” on page

19).

Recording from a CD or

MD in a specific track

order

— Program recording

You must have a program created to use this

function. (See “Creating a program” on page

13.)

1 Press (OPEN) and insert the MD to be

recorded on.

(See “Playing a disc” on page 10.)

2 Press (MD REC).

The unit stands by for recording with “z”

flashing and the buttons for recording

((MD REC), (REC STOP), and (REC MENU))

lit in amber.

3 Press (REC MENU) repeatedly until “PGM.

REC” appears.

4 Press (MD REC) again to start recording.

The unit locates the beginning of the

selected program and starts recording.

Then “z” stops flashing and the buttons for

recording ((MD REC), (REC STOP), and

(REC MENU)) light in red.

When the recording of the program is

completed, the unit beeps and

automatically stands by for further

recording while the CD or MD continues to

play.

To cancel the recording or recording stand-by,

press (REC STOP).

Notes

• If you did not create a program, “PGM. REC” will

not appear in step 3.

• If you created a program that includes the MD to

play on this recorder, “Not Ready” appears in

step 3. In such a case, you must erase such tracks

from the program.

Tip

You can continue the recording even after turning

off the ignition to leave the car (see “Continuing

recording after turning the ignition off” on page

19).

La page charge ...

Sony MDX-C800REC Manuel utilisateur

Sony MDX-C800REC Manuel utilisateur

dans d''autres langues

Documents connexes