Electrolux EWF128500W Manuel utilisateur

Marque: Electrolux

Modèle: EWF128500W

Catégorie: Machines à laver

Taper: Manuel utilisateur

EWF 128500 W

................................................ .............................................

EN WASHING MACHINE USER MANUAL 2

FR LAVE-LINGE NOTICE D'UTILISATION 27

Electrolux. Thinking of you.

Share more of our thinking at www.electrolux.com

CONTENTS

Safety instructions 2

Product description 4

Control panel 4

Washing programmes 8

Consumption values 11

Helpful hints and tips 12

First use 14

Daily use 14

Care and cleaning 17

What to do if… 20

Technical data 22

Installation 23

Electrical connection 25

Environment concerns 26

Subject to change without notice.

SAFETY INSTRUCTIONS

Important! Read carefully & keep for future

reference.

• The safety of Your appliance complies

with the industry standards and with legal

requirements on the safety of appliances.

However, as manufacturers, we feel it is

our duty to provide the following safety

notes.

• It is most important that this instruction

book should be retained with the appli-

ance for future reference. Should the ap-

pliance be sold or transferred to another

owner, or should you move house and

leave the appliance, always ensure that

the book is supplied with the appliance in

order that the new owner can get to

know the functioning of the appliance

and the relevant warnings.

• You MUST read them carefully before in-

stalling or using the appliance.

• Before first starting up, check the appli-

ance for any damage incurred during

transport. Never connect up a damaged

appliance . If parts are damaged, contact

the Service Centre.

• If the appliance is delivered in the winter

months when there are minus tempera-

tures. Store it at room temperature for 24

hours before using for the first time.

GENERAL SAFETY

• It is dangerous to alter the specifications

or attempt to modify this product in any

way.

• During high temperature wash pro-

grammes the door glass may get hot. Do

not touch it!

• Make sure that small pets and children

do not climb into the drum. To avoid this,

please check into the drum before using.

• Any objects such as coins, safety pins,

nails, screws, stones or any other hard,

sharp material can cause extensive dam-

age and must not be placed into the ma-

chine.

• Only use the advised quantities of fabric

softener and detergent. Damage to the

fabric can ensue if you over-fill. Refer to

the manufacturer’s recommendations of

quantities.

• Wash small items such as socks, laces,

washable belts in a washing bag or pillow

case as it is possible for such items to

slip down between the tub and the inner

drum.

• Do not use your washing machine to

wash articles with whalebones, material

without hems or torn material.

• Always unplug the appliance and turn off

the water supply after use, cleaning and

maintenance.

• Under no circumstances should you at-

tempt to repair the machine yourself. Re-

pairs carried out by inexperienced people

may cause injury or serious malfunction-

ing. Contact your local Service Centre.

Always insist on genuine spare parts.

INSTALLATION

• This appliance is heavy. Care should be

taken when moving it.

2 electrolux

• When unpacking the appliance, check

that it is not damaged. If in doubt, do not

use it and contact the Service Centre.

• All packing and transit bolts must be re-

moved before use. Serious damage can

occur to the product and to property if

this is not adhered to. See relevant sec-

tion in the user manual.

• After having installed the appliance,

check that it is not standing on the inlet

and drain hose and the worktop is not

pressing the electrical supply cable

against the wall.

• If the machine is situated on a carpeted

floor, please adjust the feet in order to al-

low air to circulate freely under the appli-

ance.

• Always be sure, that there is no water

leakage from hoses and their connec-

tions after the installation.

• If the appliance is installed in a location

subject to frost, please read the “dangers

of freezing” chapter.

• Any plumbing work required to install this

appliance should be carried out by a

qualified plumber or competent person.

• Any electrical work required to install this

appliance should be carried out by a cer-

tified Service Centre.

USE

• This appliance is designed for domestic

use. It must not be used for purposes

other than those for which it was de-

signed.

• Only wash fabrics which are designed to

be machine washed. Follow the instruc-

tions on each garment label.

• Do not overload the appliance. See the

Washing Programme Table.

• Before washing, ensure that all pockets

are empty and buttons and zips are fas-

tened. Avoid washing frayed or torn arti-

cles and treat stains such as paint, ink,

rust, and grass before washing. Under-

wired bras must NOT be machine wash-

ed.

• Garments which have been in contact

with volatile petroleum products should

not be machine washed. If volatile clean-

ing fluids are used, care should be taken

to ensure that the fluid is removed from

the garment before placing in the ma-

chine.

• Never pull the power supply cable to re-

move the plug from the socket; always

take hold of the plug itself.

• Never use the appliance if the power

supply cable, the control panel, the work-

ing surface or the base are damaged so

that the inside of the washing machine is

accessible.

CHILD SAFETY

• This appliance is not intended for use by

person (including children) with reduced

physical sensory or mental capabilities or

lack of experience and knowledge unless

they have been given supervision or in-

struction concerning use of the appliance

by a person responsible for their safety.

• Children should be supervised to ensure

that they do not play with the appliance.

• The packaging components (e.g. plastic

film, polystyrene) can be dangerous to

children - danger of suffocation! Keep

them out of children’s reach.

• Keep all detergents in a safe place out of

children’s reach.

• Make sure that children or pets do not

climb into the drum. To prevent children

and pets becoming trapped inside the

drum the machine incorporates a special

feature.

Door safety button

– To activate this device, rotate the but-

ton (without pressing it) inside the door

clockwise until the groove is horizontal.

If necessary use a coin.

To disable this device and restore the

possibility of closing the door, rotate

the button counter-clockwise until the

groove is vertical.

electrolux 3

PRODUCT DESCRIPTION

Detergent dispenser drawer

Control panel

Door opening handle

Rating Plate

Drain pump

Adjustable feet

DETERGENT DISPENSER DRAWER

Compartment for detergent used for

prewash and soak phase or for stain re-

mover used during the stain action phase (if

available). The prewash and soak detergent

is added at the beginning of the wash pro-

gramme. The stain remover is added dur-

ing the stain action phase.

Compartment for powder or liquid de-

tergent used for main wash. If using liquid

detergent pour it just before starting the

programme.

Compartment for liquid additives (fabric

softener, starch).

Follow the product manufacturer’s recom-

mendations on quantities to use and do not

exceed the «MAX» mark in the detergent

dispenser drawer. Any fabric softener or

starching additives must be poured into the

compartment before starting the wash pro-

gramme.

CONTROL PANEL

Below is a picture of the control panel. It shows the programme selector dial as well as

the buttons, pilot lights and the display. These are presented by relevant numbers on

the following pages.

4 electrolux

1 2 3 4 5 6 7 8 9

Programme selector dial

TEMPERATURE button

SPIN reduction button

EASY IRON button

EXTRA RINSE button

DELAY START button

Display

START/PAUSE button

TIME MANAGER buttons

TABLE OF SYMBOLS

= On/Off

= Prewash

= Wool

= Handwash

= Lingerie

= Silk

= Jeans

= Soak

= Rinses

= Drain

= Spin

= Delicate spin

= No spin

= Rinse hold

= Door locked

= Time Manager

PROGRAMME SELECTOR DIAL

It allows you to switch the appliance on/off

and/or to select a programme.

TEMPERATURE

This button allows you to increase or de-

crease the washing temperature.

SPIN REDUCTION

By pressing this button you can change the

spin speed of the selected programme.

AVAILABLE OPTIONS:

NO SPIN

By selecting this option, all spinning phases

are suppressed and replaced by a drain, so

as not to wrinkle the laundry. Recommen-

ded for extremely delicate fabrics. On some

programmes the rinses will be performed

with more water.

RINSE HOLD

By selecting this function the water of the

last rinse is not emptied out to prevent the

fabrics from creasing. Before opening the

door it will be necessary to empty out the

water. To empty out the water, please read

the paragraph «At the end of the pro-

gramme».

electrolux 5

EASY IRON

By selecting this option the laundry is gently

washed and spun to avoid any creasing. In

this way ironing is easier. Furthermore the

machine will perform some additional rinses

in some programmes. On cotton pro-

grammes the maximum spin speed is re-

duced automatically.

EXTRA RINSE

This appliance is designed to save energy.

If it necessary to rinse the laundry using an

extra quantity of water (extra rinse), select

this option. Some additional rinses will be

performed. This option is recommended for

people who are allergic to detergents, and

in areas where the water is very soft.

DELAY START

The programme can be delayed from 30

min - 60 min - 90 min, 2 hours and then by

1 hour up to a maximum of 20 hours by

means of this button.

START PAUSE

This button allows you to start or to inter-

rupt the selected programme.

TIME MANAGER

These buttons allows you to modify the

programme duration automatically pro-

posed by the appliance.

ACOUSTIC SIGNALS

The machine is provided with an acoustic

device, which sounds in the following ca-

ses:

• at the end of the cycle

• if there is a fault.

By pressing the 4 and 5 buttons simultane-

ously for about 6 seconds, the acoustic

signal is deactivated (except if there is a

fault). By pressing these 2 buttons again,

the acoustic signal is reactivated.

DISPLAY

7.1 7.3 7.5 7.6 7.7 7.8

7.9

7.107.117.12

7.2 7.4

The display shows the following informa-

tion:

7.1:Temperature value

7.2: Temperature icons

, Cold .

During the washing cycle the display shows

the temperature icon animated to indicate

that the appliance has started the heating

phase of the water in the tub.

7.3: Spin value

7.4: Spin speed icons.

•

No spin

•

Rinse Hold

•

Night Cycle

During the spinning phase the spiral is ani-

mated.

No spin option eliminates all the spin pha-

ses and increases the number of rinses for

some programmes.

Rinse Hold: by selecting this option the

water of the last rinse is not emptied out to

prevent the fabrics from creasing. When the

programme has finished the display shows

three blinking

, the icon 7.10 is still

visualized, the light of button 8 is off and the

door is locked to indicate that the water

must be emptied out. To empty out the wa-

6 electrolux

ter, please read the paragraph «At the end

of the programme».

Night Cycle: by selecting this option, the

machine will not drain the water of the last

rinse, so as not to wrinkle the laundry. As all

spinning phases are suppressed, this

washing cycle is very noiseless and it can

be selected at night or in times with a more

economical power rate. On some pro-

grammes the rinses will be performed with

more water. When the programme has fin-

ished, the display shows three blinking

, the icon 7.10 is still visualized, the

light of button 8 is off and the door is

locked to indicate that the water must be

emptied out. To empty out the water,

please read the paragraph «At the end of

the programme».

7.5: Option icons.

•

Extra Rinse

•

Easy Iron

•

Sensitive

(if available).

7.6: Child safety lock

- not available

in this model

7.7: Soil degree icons

•

Intensive

•

Normal/Daily

•

Light/Quick

•

Super Quick

7.8:

•

Duration of the selected programme

After selecting a programme, the duration

is displayed in hours and minutes (for ex-

ample

). The duration is calculated

automatically on the basis of the maxi-

mum recommended load for each type of

fabric. After the programme has started,

the time remaining is updated every mi-

nute.

•

End of programme

When the programme has finished three

blinking zeros (

) are displayed, the

icon 7.10 disappears and the door can

be opened.

• Incorrect option selection

If an option which is not compatible with

the set wash programme is selected, the

message Err is displayed at the bottom

of the display for a few seconds and the

integrated red light of button 8 start flash-

ing.

•

Alarm codes

In the event of operating problems, some

alarm codes can be displayed, for exam-

ple

(see paragraph «What to do

if...»).

• Delay Time value

7.9: Clock icon

After the programme has started, the dura-

tion is displayed and the clock icon is ani-

mated.

7.10: Door locked icon

After you have pressed button 8 and the

machine has started, this icon is lighted on

and only the phase running icon stays on.

When the programme has finished, three

flashing zeros (

) are displayed and

this icon disappears.

7.11: Washing programme phase icons

•

Prewash

•

Wash

•

Rinses

•

Drain

•

Spin

By selecting the wash programme, the

washing programme phase icons corre-

sponding to the various phases making up

the programme are shown in the upper part

of the display. After having pressed button

8 only the icon of the running phase stays

on.

7.12: Delay icon

The selected delay set by pressing the rele-

vant button appears on the display for a

few seconds, then the duration of the previ-

ously selected programme is displayed. The

relevant icon is lighted on. The delay time

value decreases by one unit every hour and

then, when 1 hour remains, the time de-

creases every minute.

electrolux 7

WASHING PROGRAMMES

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Spin Speed

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

COTTON

90° -

(cold)

Main wash - Rinses

Maximum spin speed 1200 rpm

Max. load 7 kg - Reduced load 3.5 kg

White and coloured cotton (normally soiled items).

SPIN REDUCTION

NO SPIN

RINSE HOLD

NIGHT CYCLE

EASY IRON

EXTRA RINSE

TIME MANAGER

COTTON ECO

90° - 40°

Main wash - Rinses

Maximum spin speed 1200 rpm

Max. load 7 kg

White and fast coloured cotton.

This programme can be selected for slightly or nor-

mally soiled cotton items. The temperature will de-

crease and the washing time will be extended. This al-

lows to obtain a good washing efficiency so saving

energy.

SPIN REDUCTION

NO SPIN

RINSE HOLD

NIGHT CYCLE

EASY IRON

EXTRA RINSE

COTTON + PREWASH

90° -

(cold)

Prewash - Main wash - Rinses

Maximum spin speed 1200 rpm

Max. load 7 kg - Reduced load 3.5 kg

This programme can be selected for heavily soiled

cotton with prewash phase.

SPIN REDUCTION

NO SPIN

RINSE HOLD

NIGHT CYCLE

EASY IRON

EXTRA RINSE

TIME MANAGER

COTTON ECO + PREWASH

90° - 40°

Main wash - Rinses

Maximum spin speed 1200 rpm

Max. load 7 kg

This programme can be selected for normally soiled

cotton items with stains. The temperature will de-

crease and the washing time will be extended.

SPIN REDUCTION

NO SPIN

RINSE HOLD

NIGHT CYCLE

EASY IRON

EXTRA RINSE

SYNTHETICS

60° -

(cold)

Main wash - Rinses

Maximum spin speed 900 rpm

Max. load 3.5 kg - Reduced load 2 kg

Synthetic or mixed fabrics: underwear, coloured

garments, non-shrink shirts, blouses.

SPIN REDUCTION

NO SPIN

RINSE HOLD

NIGHT CYCLE

EASY IRON

EXTRA RINSE

TIME MANAGER

SYNTHETICS + PREWASH

60° -

(cold)

Prewash - Main wash - Rinses

Maximum spin speed 900 rpm

Max. load 3.5 kg - Reduced load 2 kg

Synthetic or mixed fabrics: underwear, coloured gar-

ments, non-shrink shirts, blouses, with prewash

phase.

SPIN REDUCTION

NO SPIN

RINSE HOLD

NIGHT CYCLE

EASY IRON

EXTRA RINSE

TIME MANAGER

8 electrolux

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Spin Speed

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

SYNTHETICS ECO

40°

Main wash - Rinses

Maximum spin speed 900 rpm

Max. load 3.5 kg - Reduced load 2 kg

This programme can be selected for synthetics and

mixed fabric items. This allows to obtain a good

washing efficiency by saving energy. The washing

temperature is 40° C.

SPIN REDUCTION

NO SPIN

RINSE HOLD

NIGHT CYCLE

EASY IRON

EXTRA RINSE

SYNTHETICS ECO + PREWASH

40°

Prewash - Main wash - Rinses

Maximum spin speed 900 rpm

Max. load 3.5 kg - Reduced load 2 kg

This programme can be selected for synthetic and

mixed items with stains.

SPIN REDUCTION

NO SPIN

RINSE HOLD

NIGHT CYCLE

EASY IRON

EXTRA RINSE

DELICATES + PREWASH

40° -

(cold)

Prewash - Main wash - Rinses

Maximum spin speed 700 rpm

Max. load kg 3.5 - Reduced load kg 2

For delicate fabrics, e.g. acrylics, viscose, polyester,

with prewash phase.

SPIN REDUCTION

NO SPIN

RINSE HOLD

NIGHT CYCLE

EXTRA RINSE

TIME MANAGER

DELICATES

40° -

(cold)

Main wash - Rinses

Maximum spin speed 700 rpm

Max. load kg 3.5 - Reduced load kg 2

Delicate fabrics: acrylics, viscose, polyester.

SPIN REDUCTION

NO SPIN

RINSE HOLD

NIGHT CYCLE

EXTRA RINSE

TIME MANAGER

WOOL

40° -

(cold)

Main wash - Rinses

Maximum spin speed 1000 rpm

Max. load 2 kg

Washing programme for machine washable wool as

well as for hand washable woollens and delicate fab-

rics.

Note: A single or bulky item may cause imbalance. If

the appliance doesn’t perform the final spin phase,

add more items, redistribute the load manually and

then select the spinning programme.

SPIN REDUCTION

NO SPIN

RINSE HOLD

NIGHT CYCLE

HANDWASH

40° -

(cold)

Main wash - Rinses

Maximum spin speed 1000 rpm

Max. load 2 kg

Special programme for delicate fabrics with «hand

washing» care symbol.

SPIN REDUCTION

NO SPIN

RINSE HOLD

NIGHT CYCLE

electrolux 9

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Spin Speed

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

LINGERIE

40°

Main wash - Rinses

Maximum spin speed 900 rpm

Max. load 1 kg

This programme is suitable for very delicate items, as

lingerie, bras and underwear etc.

SPIN REDUCTION

NO SPIN

RINSE HOLD

NIGHT CYCLE

SILK

30°

Main wash - Rinses

Maximum spin speed 700 rpm

Max. load 1 kg

Delicate washing programme suitable for silk and

mixed synthetic items.

SPIN REDUCTION

NO SPIN

RINSE HOLD

NIGHT CYCLE

JEANS

40°

Main wash - Rinses

Maximum spin speed 1200 rpm

Max. load 3.5 kg

With this programme it is possible to wash items like

pants, shirts or jackets in Jeans and also jersey realiz-

ed with hi-tech materials. (The Extra Rinse option will

be activated automatically).

SPIN REDUCTION

NO SPIN

RINSE HOLD

NIGHT CYCLE

EASY IRON

SOAK

30°

Prewash - Soak for about 40 minutes - Stop with wa-

ter in the tub

Max. load 7 kg

Special programme for heavily soiled laundry. The ma-

chine performs a soak at 30° C. At the end of this

time the machine will stop automatically with water left

in the tub.

Before starting a new washing phase, it is necessary

to empty out the water by:

• Draining only: turn the programme selector dial to

Drain programme. (Press the button 8).

• Draining and spinning: turn the programme se-

lector dial to programme Spin, reduce the spin

speed by means of button 2, and then press button

Important! This programme cannot be used for very

delicate fabrics as silk or wool. Pour the detergent for

the soak programme into the compartment marked

. At the end of the soak (after having emptied out

the water) you can select the washing programme.

(First turn the programme selector dial to

, then to

the programme and press the button 8).

10 electrolux

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Spin Speed

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

RINSES

Rinses - Long spin

Spin at the maximum speed

Max. load 7 kg

With this programme it is possible to rinse and spin

cotton garments which have been washed by hand. If

necessary, reduced the spin speed.

SPIN REDUCTION

NO SPIN

RINSE HOLD

NIGHT CYCLE

EASY IRON

EXTRA RINSE

DRAIN

Draining of water

Max. load 7 kg

For emptying out the water of the last rinse in pro-

grammes with the option selected, which ends with

water left in the tub.

SPIN

Drain and long spin

Maximum spin speed 1200 rpm

Max. load 7 kg

Separate spin for hand washed cotton garments and

after programmes with the option selected, which

ends with water left in the tub. You can choose the

spin speed by pressing the relevant button to adapt it

to the fabrics to be spun.

SPIN REDUCTION

DELICATE SPIN

Drain and short spin

Maximum spin speed 700 rpm

Max. load 3.5 kg

Separate short spin for delicate, synthetic, wool, silk

and hand washed garments.

SPIN REDUCTION

= ON/OFF

For cancelling the programme which is running or to

switch the machine off .

1) If you select the Super Quick option by pressing button 10, we recommend that you reduce the maximum load as

indicated. Full loading is possible however with somewhat reduced cleaning results.

2) Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, the

«Cotton Eco 60° C» and «Cotton Eco 40° C» are respectively the «standard 60° C cotton programme» and the

«standard 40° C cotton programme». Set this programme to have a good washing results and decrease the

energy consumption. The time of the washing programme is extended. Set this programme to have a good

washing results and decrease the energy consumption. The time of the washing programme is extended.

3) If using liquid detergents, a programme without Prewash must be selected.

CONSUMPTION VALUES

The data of this table are approximate. Different causes can change the data: the

quantity and type of laundry, the water and ambient temperature.

electrolux 11

Programmes Load

(kg)

Energy con-

sumption

(kWh)

Water con-

sumption (li-

tre)

Approximate

programme

duration (mi-

nutes)

Remaining

moisture

(%)

Cottons 60 °C 7 1.3 59 120 53

Cottons 40 °C 7 0.77 60 120 53

Synthetics 40 °C 3.5 0.5 54 80 35

Delicates 40 °C 3.5 0.6 63 65 35

Wool/Hand wash

30 °C

2 0.25 55 60 30

Standard cotton programmes

Standard 60 °C

cotton

7 1.15 61 210 53

Standard 60 °C

cotton

3.5 0.73 47 172 53

Standard 40 °C

cotton

3.5 0.6 48 170 53

1) At the end of spin phase.

Off Mode (W) Left On Mode (W)

0.10 0.98

The information given in the charts above are in compliance with the EU Commission regulation

1015/2010 implementing directive 2009/125/EC.

HELPFUL HINTS AND TIPS

SORTING OUT THE LAUNDRY

Follow the wash code symbols on each

garment label and the manufacturer’s

washing instructions. Sort the laundry as

follows: whites, coloureds, synthetics, deli-

cates, woollens.

TEMPERATURES

95° or 90°

for normally soiled white cot-

tons and linen (e.g. tea cloths,

towels, tablecloths, sheets...)

60°/50°

for normally soiled, colour fast

garments (e.g. shirts, night

dresses, pyjamas....) in linen,

cotton or synthetic fibres and

for lightly soiled white cotton

(e.g. underwear)

40°-30°-

Cold

for delicate items (e.g. net cur-

tains), mixed laundry including

synthetic fibres and woollens

bearing the label «pure new

wool, machine washable, non-

shrink»

BEFORE LOADING THE LAUNDRY

Never wash whites and coloureds together.

Whites may lose their «whiteness» in the

wash.

New coloured items may run in the first

wash; they should therefore be washed

separately the first time.

Make sure that no metal objects are

left in the laundry (e.g. hair clips, safety

pins, pins).

Button up pillowcases, close zip fasteners,

hooks and poppers. Tie any belts or long

tapes.

Remove persistent stains before washing.

Rub particularly soiled areas with a special

detergent or detergent paste.

Treat curtains with special care. Remove

hooks or tie them up in a bag or net.

MAXIMUM LOADS

Recommended loads are indicated in the

washing programme charts.

General rules:

• Cotton, linen: drum full but not too

tightly packed;

12 electrolux

• Synthetics: drum no more than half full;

• Delicate fabrics and woollens: drum

no more than one third full.

Washing a maximum load makes the most

efficient use of water and energy.

For heavily soiled laundry, reduce the load

size.

REMOVING STAINS

Stubborn stains may not be removed by

just water and detergent. It is therefore ad-

visable to treat them prior to washing.

Blood: treat fresh stains with cold water.

For dried stains, soak overnight in water

with a special detergent then rub in the

soap and water.

Oil based paint: moisten with benzine

stain remover, lay the garment on a soft

cloth and dab the stain; treat several times.

Dried grease stains: moisten with turpen-

tine, lay the garment on a soft surface and

dab the stain with the fingertips and a cot-

ton cloth.

Rust: oxalic acid dissolved in hot water or a

rust removing product used cold. Be careful

with rust stains which are not recent since

the cellulose structure will already have

been damaged and the fabric tends to hole.

Mould stains: treat with bleach, rinse well

(whites and fast coloureds only).

Grass: soap lightly and treat with bleach

(whites and fast coloureds only).

Ball point pen and glue: moisten with

acetone

, lay the garment on a soft cloth

and dab the stain.

Lipstick: moisten with acetone as above,

then treat stains with methylated spirits.

Treat any residual marks with bleach.

Red wine: soak in water and detergent,

rinse and treat with acetic or citric acid,

then rinse. Treat any residual marks with

bleach.

Ink: depending on the type of ink, moisten

the fabric first with acetone

, then with

acetic acid; treat any residual marks on

white fabrics with bleach and then rinse

thoroughly.

Tar stains: first treat with stain remover,

methylated spirits or benzine, then rub with

detergent paste.

DETERGENTS AND ADDITIVES

Good washing results also depend on the

choice of detergent and use of the correct

quantities to avoid waste and protect the

environment.

Although biodegradable, detergents contain

substances which, in large quantities, can

upset the delicate balance of nature.

The choice of detergent will depend on the

type of fabric (delicates, woollens, cottons,

etc.), the colour, washing temperature and

degree of soiling.

All commonly available washing machine

detergents may be used in this appliance:

• powder detergents for all types of fabric

• powder detergents for delicate fabrics

(60°C max) and woollens

• liquid detergents, preferably for low tem-

perature wash programmes (60°C max)

for all types of fabric, or special for wool-

lens only.

The detergent and any additives must be

placed in the appropriate compartments of

the dispenser drawer before starting the

wash programme.

If using liquid detergents, a programme

without prewash must be selected.

Follow the product manufacturer’s recom-

mendations on quantities to use and do

not exceed the «MAX» mark in the de-

tergent dispenser drawer.

QUANTITY OF DETERGENT TO BE

USED

The type and quantity of detergent will de-

pend on the type of fabric, load size, de-

gree of soiling and hardness of the water

used.

Follow the product manufacturers’ instruc-

tions on quantities to use.

Use less detergent if:

• you are washing a small load

• the laundry is lightly soiled

• large amounts of foam form during wash-

ing.

DEGREES OF WATER HARDNESS

Water hardness is classified in so-called

“degrees” of hardness. Information on hard-

ness of the water in your area can be ob-

tained from the relevant water supply com-

pany, or from your local authority. If the wa-

1) do not use acetone on artificial silk

electrolux 13

ter hardness degree is medium or high we

suggest you to add a water softener follow-

ing always the manufacturer’s instructions.

When the degree of hardness is soft, read-

just the quantity of the detergent.

FIRST USE

• Ensure that the electrical and water

connections comply with the installa-

tion instructions.

• Remove the polystyrene block and

any material from the drum.

• Pour 2 litres of water into the main

wash compartment

of the deter-

gent drawer in order to activate the

ECO valve. Then run a cotton cycle

at the highest temperature without

any laundry in the machine, to re-

move any manufacturing residue

from the drum and tub. Pour 1/2 a

measure of detergent into the main

wash compartment and start the

machine.

DAILY USE

Load the laundry

Open the door by carefully pulling the door

handle outwards. Place the laundry in the

drum, one item at a time, shaking them out

as much as possible. Close the door.

Make sure that no laundry stays between

the seal and the door. There is a risk of wa-

ter leakage or damage to the laundry.

Measure out the detergent and the fab-

ric softener

Pull out the dispenser drawer until it stops.

Measure out the amount of detergent re-

quired, pour it into the main wash compart-

ment

or in the appropriate compartment

if the selected programme/option it requires

(see more details in «Detergent dispenser

drawer»).

If required, pour fabric softener into the

compartment marked

(the amount used

must not exceed the «MAX» mark in the

drawer). Close the drawer gently.

SELECT THE REQUIRED PROGRAMME

BY TURNING THE PROGRAMME

SELECTOR DIAL (1)

Turn the programme selector dial to the re-

quired programme. The washing machine

will propose a temperature and automati-

cally select the maximum spin value provi-

14 electrolux

ded for the programme you have chosen.

You can change these values by operating

the corresponding buttons. The green pilot

light of the button 8 starts to flash.

The selector dial can be turned either clock-

wise or counterclockwise. Turn to position

to reset programme/Switching the ma-

chine off.

At the end of the programme the selec-

tor dial must be turned to position

to switch the machine off.

Caution! If you turn the programme

selector dial to another programme

when the machine is working, the red

pilot light of button 8 will blink 3 times

and the message Err is displayed to

indicate a wrong selection. The

machine will not perform the new

selected programme.

SELECT THE TEMPERATURE BY

PRESSING BUTTON 2

By selecting a programme, the appliance

proposes automatically a default tempera-

ture.

Press this button repeatedly to increase or

decrease the temperature, if you want your

laundry to be washed at a different temper-

ature.

REDUCE THE SPIN SPEED BY

PRESSING BUTTON 3

By selecting a programme, the appliance

proposes automatically the maximum spin

speed provided for that programme.

Press button 3 repeatedly to change the

spin speed, if you want your laundry to be

spun at a different speed.

SELECT THE AVAILABLE OPTIONS BY

PRESSING BUTTONS 3, 4 AND 5

Depending on the programme, different

functions can be combined. These must be

selected after choosing the desired pro-

gramme and before pressing button 8.

When these buttons are pressed, the corre-

sponding icons appear on the display.

When they are pressed again, the icons

disappear. If an incorrect option is selected,

the integrated red pilot light of the button 8

flashes for 3 times and the Err message

appears on the display for a few seconds.

For the compatibility among the wash-

ing programmes and the options see

chapter «Washing Programmes».

SELECT THE DELAY START BY

PRESSING BUTTON 6

Before you start the programme, if you wish

to delay the start, press the button 6 re-

peatedly, to select the desired delay. The

corresponding icon 7.12 will appear on the

display in the upper part of the display.

The selected delay time value (up to 20

hours) will appear on the display a few sec-

onds, then the duration of the programme

will appear again.

You must select this option after you have

set the programme and before you press

button 8.

You can cancel or modify the delay time at

any moment, before you press button 8.

Selecting the delayed start:

1. Select the programme and the required

options.

2. Select the delay start by pressing the

button 6.

3. Press button 8:

– the machine starts its hourly count-

down.

– The programme will start after the

selected delay has expired.

Cancelling the delayed start after having

pressed button 8:

1. Set the washing machine to PAUSE by

pressing button 8.

Press button 6 once until the symbol

’ is displayed

3. Press button 8 again to start the pro-

gramme.

Important! The selected delay can be

changed only after selecting the washing

programme again.

The Delay Start can not be selected with

DRAIN programme.

START THE PROGRAMME BY

PRESSING BUTTON 8

To start the selected programme, press the

button 8, the green pilot light of the button

8 stops blinking. The icon 7.10 appears on

the display to indicate that the appliance

starts operating and the door is locked.

electrolux 15

To interrupt a programme which is running,

press the button 8: the green pilot light

starts to blink.

To restart the programme from the point at

which it was interrupted, press the button 8

again. If you have chosen a delayed start,

the machine will begin the countdown.

If an incorrect option is selected, the red pi-

lot light of the button 8 blinks for 3 times

the message Err is displayed for few sec-

onds.

SELECT THE TIME MANAGER OPTION

BY PRESSING BUTTONS 9

By pressing these buttons repeatedly, the

duration of the washing cycle can be in-

creased or decreased. The icon 7.7 will ap-

pear on the display to indicate the chosen

degree of soil. This option is available only

with Cotton, Synthetic and Delicate pro-

grammes.

Washing cy-

cle

Soil

Level

icon

Type of fabric

Intensive Heavy soiled items

Normal Normal soiled items

Daily Daily soiled items

Light Slightly soiled items

Quick Very slightly soiled

items

Super Quick

Items used or worn

for a short time

1) We recommend you to reduce the load sizes (see

Washing programmes table).

Important! The Time Manager cannot be

selected with the programmes

The availability of these soil level icons

change according to the type of fabric as

shown in the following chart.

Fabric Soil Level

Cottons

95°/90°C X X X X X X

60°C/50°C X X X X X X

40°C X X X X X X

30°C X X X X X X

Cold X X X X X X

Synthetics

Fabric Soil Level

60°C/50°C X X X X

40°C X X X X

30°C X X X X

Cold X X X X

Delicates

40°C X X X X

30°C X X X X

Cold X X X X

ALTERING AN OPTION OR A RUNNING

PROGRAMME

It is possible to change some options be-

fore the programme carries them out .

Before you make any change, you must

PAUSE the appliance by pressing the but-

ton 8 (if you wish to change the Time Man-

ager option, you must cancel the running

programme and make your selection

again).

Changing a running programme is possible

only by resetting it. Turn the programme se-

lector dial to

and then to the new pro-

gramme position. Start the new programme

by pressing the button 8 again. The wash-

ing water in the tub will be not emptied out.

INTERRUPTING A PROGRAMME

Press the button 8 to interrupt a pro-

gramme which is running, the correspond-

ing green pilot light starts blinking.

Press the button again to restart the pro-

gramme.

CANCELLING A PROGRAMME

Turn the selector dial to

to cancel a pro-

gramme which is running.

You can select now a new programme.

OPENING THE DOOR

After the programme has started (or during

the delay time) the door is locked, if you

need to open it, set first the machine to

PAUSE by pressing the button 8.

If the icon 7.10 after a few minutes disap-

pears from the display, the door can be

opened.

If the icon 7.10 does not go off, this means

that the machine is already heating or that

the water level is too high. Do not try to

force the door!

16 electrolux

If you cannot open the door but you need

to open it you have to switch the machine

off by turning the selector dial to

. After a

few minutes the door can be opened (pay

attention to the water level and temper-

ature!).

After closing the door, it is necessary to se-

lect the programme and options again and

to press button 8.

AT THE END OF THE PROGRAMME

The machine stops automatically. Three

blinking zeros (

) appear on the dis-

play. The pilot light of button 8 goes off.

Some acoustic signals sound for a few mi-

nutes.

If you set a programme or an option that

ends with water left in the tub, the icon 7.10

remains displayed. The door is still locked.

The water must be emptied out before

opening the door. During this time the drum

continues to turn at regular intervals until

water drain.

Follow the below instructions to empty out

the water:

Turn the programme selector dial to

2. Select the draining or spinning pro-

gramme.

3. Reduce the spin speed if needed, by

pressing the relevant button.

4. Press button 8.

At the end of the programme, after a few

minutes, the icon 7.10 disappears. The

door can be opened. Turn the programme

selector dial to

to switch the machine

off.

Remove the laundry from the drum and

carefully check that the drum is empty. If

you do not intend to carry out another

wash, close the water tap. Leave the door

open to prevent the formation of mildew

and unpleasant smells.

Stand by : once the programme has finish-

ed after a few minutes the energy saving

system will be enabled. The brightness of

the display is reduced. By pressing any but-

ton the appliance will come out of the ener-

gy saving status.

CARE AND CLEANING

Warning! You must DISCONNECT the

appliance from the electricity supply,

before you can carry out any cleaning

or maintenance work.

DESCALING

The water we use normally contains lime. It

is a good idea to periodically use a water

softening powder in the machine. Do this

separately from any laundry washing, and

according to the softening powder manu-

facturer's instructions. This will help to pre-

vent the formation of lime deposits.

AFTER EACH WASH

Leave the door open for a while. This helps

to prevent mould and stagnant smells form-

ing inside the appliance. Keeping the door

open after a wash will also help to preserve

the door seal.

EXTERNAL CLEANING

Clean the exterior cabinet of the appliance

with soap and water only, and then dry

thoroughly.

DOOR SEAL

Check from time to time the door seal and

eliminate eventual possible objects that

could be trapped in the fold.

CLEANING THE DISPENSER DRAWER

The detergent dispenser drawer should be

cleaned regularly.

The washing powder and additive dispens-

er drawer should be cleaned regularly.

Remove the drawer by pressing the catch

downwards and by pulling it out.

electrolux 17

Flush it out under a tap, to remove any

traces of accumulated powder.

To aid cleaning, the top part of the additive

compartment should be removed. Clean all

parts with water.

Clean the chamber of dispenser drawer

with a brush.

CLEANING THE PUMP

The pump should be inspected regularly

and particularly if:

• The appliance does not empty and/or

spin.

• The appliance makes an unusual noise

during draining due to objects such as

safety pins, coins etc. blocking the

pump.

• A problem with water draining is detected

(see chapter “What to do if...” for more

details).

Warning! Before opening the pump

door, switch the appliance off and

remove the mains plug from the

socket.

Proceed as follows:

1. Unplug the appliance.

2. If it is necessary, wait until the water

has cooled down.

3. Open the pump door.

4. Place a container close to the pump .

5. Unscrew carefully the drain filter to

drain out the water.

When no more water comes out, re-

move the filter. If necessary, use pliers.

Always keep a rag nearby to dry up any

water spillage when removing the filter.

6. Clean the filter under a tap, to remove

any traces of fluff.

18 electrolux

7. Remove foreign bodies and fluff from

the pump impeller.

8. Check carefully whether the pump im-

peller rotates (it rotates jerkily). If it

doesn’t rotate, please contact the

Service.

9. Replace the filter into the pump by in-

serting it correctly into the special

guides.

Screw firmly the filter.

10. Close the pump door.

Caution! When the appliance is in use

and depending on the programme

selected there can be hot water in the

pump.

Never remove the filter during a wash

cycle.

Always wait until the appliance has fin-

ished the cycle, and is empty.

When refitting the filter, ensure it is se-

curely re-tightened so as to stop leaks

and young children being able to re-

move it.

CLEANING THE WATER INLET

FILTERS

If the appliance doesn't fill, takes long

to fill with water, the starting button

blinks red or the display (if available)

shows the relevant alarm (see chapter

"What to do if..." for more details),

check if the water inlet filters are

blocked .

To clean the water inlet filters:

1. Turn off the water tap.

2. Unscrew the hose from the tap.

3. Clean the filter in the hose with a stiff

brush.

4. Screw the hose back onto the tap.

Make sure the connection is tight.

5. Unscrew the hose from the machine.

Keep a rag nearby because some wa-

ter may flow.

Clean the filter in the valve with a stiff

brush or with the piece of cloth.

electrolux 19

6. Screw the hose back to the machine

and make sure the connection is tight.

45°

35°

7. Turn on the water tap.

FROST PRECAUTIONS

If the machine is installed in a place where

the temperature could drop below 0°C, re-

move the remaining water from the inlet

hose and the drain pump.

1. disconnect the mains plug from the

mains socket.

2. close the water tap

3. unscrew the water inlet hose from the

tap;

4. put the two ends of the inlet hose in a

container and let the water flow out of

the hose.

5. empty the drain pump as described in

the ‘Emergency emptying out’ section.

6. when the drain pump is empty, install

the water inlet hose again.

Warning!

Make sure that the temperature is more

than 0 °C before you use the appliance

again.

The manufacturer is not responsible for

damages caused by low temperatures.

EMERGENCY EMPTYING OUT

If the water is not discharged, proceed as

follows to empty out the machine:

1. Pull out the plug from the power sock-

et.

2. Close the water tap.

3. If necessary, wait until the water has

cooled down.

4. Open the pump door.

5. Place a bowl on the floor.

6. Unscrew carefully the filter. When the

bowl is full, screw the filter again.

– The water drain out by gravity into

the bowl.

– Empty the bowl.

– Repeat the procedure until water

stops flowing out.

7. Clean the pump if necessary as previ-

ously described.

8. Screw firmly the filter again and close

the door pump.

Important! Every time you drain the water

through the emergency emptying hose you

must pour 2 litres of water into the main

wash compartment of the detergent drawer

and then run the drain programme. This will

activate the ECO Valve device avoiding

that part of the detergent remains unused

at next washing.

WHAT TO DO IF…

Certain problems are due to lack of simple

maintenance or oversights, which can be

solved easily without calling out an engi-

neer. Before contacting your local Service

Centre, please carry out the checks listed

below.

During machine operation it is possible that

the red pilot light of button 8 blinks, one of

the following alarm codes appears on the

display and some acoustic signals sound

every 20 seconds to indicate that the ma-

chine is not working:

•

: problem with the water supply.

•

: problem with the water draining.

•

: door open.

Once the problem has been eliminated,

press the button 8 to restart the pro-

gramme. If after all checks, the problem

persists, contact your local Service Centre.

20 electrolux

La page charge ...

Electrolux EWF128500W Manuel utilisateur

Marque: Electrolux

Modèle: EWF128500W

Catégorie: Machines à laver

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Electrolux EWF128500W User manual

Electrolux EWF128500W Manuel utilisateur

Electrolux EWF128500W Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents