Electrolux EWF14380W Manuel utilisateur

Marque: Electrolux

Modèle: EWF14380W

Catégorie: Machines à laver

Taper: Manuel utilisateur

user manual

Washing Machine

EWF 14380 W

Electrolux. Thinking of you.

Share more of our thinking at www.electrolux.com

Contents

Safety information 2

Product description 4

Control panel 5

Personalization 7

First use 7

Daily use 8

Helpful hints and tips 10

Washing programmes 12

Care and cleaning 15

What to do if… 18

Technical data 20

Consumption values 21

Installation 21

Electrical connection 24

Environment concerns 24

Subject to change without notice

Safety information

Important! Read carefully & keep for future

reference.

• The safety of Your appliance complies with

the industry standards and with legal re-

quirements on the safety of appliances.

However, as manufacturers, we feel it is

our duty to provide the following safety

notes.

• It is most important that this instruction

book should be retained with the appli-

ance for future reference. Should the ap-

pliance be sold or transferred to another

owner, or should you move house and

leave the appliance, always ensure that the

book is supplied with the appliance in or-

der that the new owner can get to know

the functioning of the appliance and the

relevant warnings.

• You MUST read them carefully before in-

stalling or using the appliance.

• Before first starting up, check the appli-

ance for any damage incurred during

transport. Never connect up a damaged

appliance . If parts are damaged, contact

your supplier.

• If the appliance is delivered in the winter

months when there are minus tempera-

tures. Store it at room temperature for 24

hours before using for the first time.

General safety

• It is dangerous to alter the specifications or

attempt to modify this product in any way.

• During high temperature wash pro-

grammes the door glass may get hot. Do

not touch it!

• Make sure that small pets do not climb into

the drum. To avoid this, please check into

the drum before using.

• Any objects such as coins, safety pins,

nails, screws, stones or any other hard,

sharp material can cause extensive dam-

age and must not be placed into the ma-

chine.

• Only use the advised quantities of fabric

softener and detergent. Damage to the

fabric can ensue if you over-fill. Refer to the

manufacturer’s recommendations of

quantities.

• Wash small items such as socks, laces,

washable belts etc in a washing bag or pil-

low case as it is possible for such items to

slip down between the tub and the inner

drum.

• Do not use your washing machine to wash

articles with whalebones, material without

hems or torn material.

• Always unplug the appliance and turn off

the water supply after use, cleaning and

maintenance.

• Under no circumstances should you at-

tempt to repair the machine yourself. Re-

pairs carried out by inexperienced people

may cause injury or serious malfunction-

ing. Contact your local Service Centre. Al-

ways insist on genuine spare parts.

2 electrolux

Installation

• This appliance is heavy. Care should be

taken when moving it.

• When unpacking the appliance, check that

it is not damaged. If in doubt, do not use it

and contact the Service Centre.

• All packing and transit bolts must be re-

moved before use. Serious damage can

occur to the product and to property if this

is not adhered to. See relevant section in

the user manual.

• After having installed the appliance, check

that it is not standing on the inlet and drain

hose and the worktop is not pressing the

electrical supply cable against the wall.

• If the machine is situated on a carpeted

floor, please adjust the feet in order to al-

low air to circulate freely under the appli-

ance.

• Always be sure, that there is no water leak-

age from hoses and their connections after

the installation.

• If the appliance is installed in a location

subject to frost, please read the “dangers

of freezing” chapter.

• Any plumbing work required to install this

appliance should be carried out by a quali-

fied plumber or competent person.

• Any electrical work required to install this

appliance should be carried out by a quali-

fied electrician or competent person.

Use

• This appliance is designed for domestic

use. It must not be used for purposes other

than those for which it was designed.

• Only wash fabrics which are designed to

be machine washed. Follow the instruc-

tions on each garment label.

• Do not overload the appliance. See the

Washing Programme Table.

• Before washing, ensure that all pockets

are empty and buttons and zips are fas-

tened. Avoid washing frayed or torn arti-

cles and treat stains such as paint, ink,

rust, and grass before washing. Under-

wired bras must NOT be machine washed.

• Garments which have been in contact with

volatile petroleum products should not be

machine washed. If volatile cleaning fluids

are used, care should be taken to ensure

that the fluid is removed from the garment

before placing in the machine.

• Never pull the power supply cable to re-

move the plug from the socket; always

take hold of the plug itself.

• Never use the appliance if the power sup-

ply cable, the control panel, the working

surface or the base are damaged so that

the inside of the washing machine is ac-

cessible.

Child safety

• This appliance is not intended for use by

person (including children) with reduced

physical sensory or mental capabilities or

lack of experience and knowledge unless

they have been given supervision or in-

struction concerning use of the appliance

by a person responsible for their safety.

• The packaging components (e.g. plastic

film, polystyrene) can be dangerous to chil-

dren - danger of suffocation! Keep them

out of children’s reach.

• Keep all detergents in a safe place out of

children’s reach.

• Make sure that children or pets do not

climb into the drum. To prevent children

and pets becoming trapped inside the

drum the machine incorporates a special

feature. To activate this device, rotate the

button (without pressing it) inside the door

clockwise until the groove is horizontal. If

necessary use a coin.

To disable this device and restore the pos-

sibility of closing the door, rotate the but-

ton counterclockwise until the groove is

vertical.

electrolux 3

Product description

Your new appliance meets all modern requirements for effective treatment of laundry

with low water, energy and detergent consumption. Its new washing system allows total

use of detergent and reduces water consumption so saving energy.

1 2

1 Detergent dispenser drawer

2 Control panel

3 Door opening handle

4 Rating Plate

5 Drain pump

6 Adjustable feet

Detergent dispenser drawer

Compartment for detergent used for pre-

wash and soak phase or for stain remover

used during the stain action phase (if availa-

ble). The prewash and soak detergent is

added at the beginning of the wash pro-

gramme. The stain remover is added during

the stain action phase.

Compartment for powder or liquid deter-

gent used for main wash. If using liquid de-

tergent pour it just before starting the pro-

gramme.

Compartment for liquid additives (fabric

softener, starch).

Follow the product manufacturer’s recom-

mendations on quantities to use and do not

exceed the «MAX» mark in the detergent

dispenser drawer. Any fabric softener or

starching additives must be poured into the

compartment before starting the wash pro-

gramme.

4 electrolux

Control panel

Henceforth the programme selector dial, the buttons and the display will be indicated

with the numbers given in this table.

1 2 3 4 5 6 7 8

1 Programme selector dial

SPIN button

3 OPTIONS button

4 EXTRA RINSE button

5 Display

START/PAUSE button

7 DELAY START button

8 Indicator pilot light

Table of symbols

Cottons

Synthetics

Easy Iron

Delicates

Rinses

Drain

Spin

Wool

Handwash

Cold Wash

Mini 30

Silk

Shoes

Sport Intensive

Night Cycle

Rinse Hold

Prewash

Intensive

Super Quick

Washing

Door

End Cycle

Child Lock

Programme Selector Dial

It allows you to switch the appliance on/off

and/or to select a programme.

Spin Reduction

By pressing this button you can change the

spin speed of the selected programme.

Night Cycle

By selecting this function the machine will not

drain the water of the last rinse and all spin-

ning phases will be suppressed, so as not to

wrinkle the laundry. This washing cycle is

very quiet and it can be selected at night or

in times with a more economical power rate.

On some programmes the rinses will be per-

electrolux 5

formed with more water. Before opening the

door it will be necessary to empty out the

water. To empty out the water, please read

the paragraph «At the end of the pro-

gramme».

Rinse hold

By selecting this function the water of the last

rinse is not emptied out to prevent the fabrics

from creasing. Before opening the door it will

be necessary to empty out the water. To

empty out the water, please read the para-

graph «At the end of the programme».

Prewash

By selecting this option the machine per-

forms a prewash cycle before the main wash

phase. The washing time will be prolonged.

This option is recommended for heavily

soiled laundry.

Intensive

Select this option for heavily soiled laundry.

The washing cycle intensity will be increased

and the washing time will be prolonged by a

few minutes depending on the type of fabric.

Super Quick

Short cycle for lightly soiled items or for laun-

dry which needs only freshening up. We rec-

ommend you to reduce the fabrics loading.

Extra Rinse

This appliance is designed for saving energy.

If it necessary to rinse the laundry using an

extra quantity of water (extra rinse), select

this option. Some additional rinses will be

performed. This option is recommended for

people who are allergic to detergents, and in

areas where the water is very soft.

Start Pause

This button allows you to start or to interrupt

the selected programme.

Delay Start

The programme can be delayed from 30 min

- 60 min - 90 min, 2 hours and then by 1 hour

up to a maximum of 20 hours by means of

this button.

Indicator pilot lights

8.1

8.2

8.3

After having pressed the button 6 , the

WASHING pilot light (8.1) illuminates. When

the pilot light 8.1 comes on this means that

the machine is operating.

The DOOR pilot light (8.2) illuminates when

the programme starts and indicates if the

door can be opened:

• light on: the door cannot be opened. The

machine in working or has stopped with

water left in the tub.

• light off: the door can be opened. The pro-

gramme is finished or the water has been

emptied out.

• light flashing: the door is opening

When the programme has finished the END

CYCLE pilot light (8.3) comes on.

6 electrolux

Display

5.1:

• Duration of selected programme

After selecting a programme, the duration

is displayed in hours and minutes (for ex-

ample 2.05 ). The duration is calculated

automatically on the basis of the maximum

recommended load for each type of fabric.

After the programme has started, the time

remaining is updated every minute.

•

Alarm codes

In the event of operating problems, some

alarm codes can be displayed, for example

E20 (see chapter «What to do if...»).

• End of programme

When the programme has finished three

blinking zeros 0.00 are displayed, the Door

pilot light (8.2), the Washing pilot light (8.1)

and the pilot light of button 6 go out and

the door can be opened.

• Incorrect option selection

If an option which is not compatible with

the set wash programme is selected, the

message Err is displayed for a few sec-

onds and the red pilot light of button 6 light

starts blinking.

• Delay Start

The selected delay set by means of the

relevant button appears on the display for

a few seconds. The delay time value de-

creases by one unit every hour. When only

1 hour remains, the time decreases every

minute.

5.2:

• Heating Phase

During the washing cycle the display

shows a temperature icon (5.2) to indicate

that the appliance has started the heating

phase of the water in the tub. 5.2

5.3:

• Child safety lock

This device permits you to leave the appli-

ance unsupervised without having the

worry that children might be injured by or

cause damage to the appliance. This func-

tion remains able also when the washing

machine is not working.

There are two different ways to set this op-

tion:

–

before pressing button 6 : it will be im-

possible to start the machine;

–

after having pressed the button 6 : it will

be impossible to change any other pro-

gramme or option.

To enable (disable) this option press simul-

taneously for about 6 seconds 3 and 4

buttons until the symbol 5.3 appears (dis-

appears) on the display.

Personalization

Acoustic signals

The machine is provided of an acoustic de-

vice, which sounds in the following cases:

• at the end of the cycle

• in the event of operating problems.

By pressing the 2 and 3 buttons simultane-

ously for about 6 seconds , the acoustic

signal is deactivated (except for the events of

operating problems). By pressing these 2

buttons again, the acoustic signal is reacti-

vated.

First use

• Ensure that the electrical and water

connections comply with the installa-

tion instructions.

• Remove the polystyrene block and

any material from the drum.

• Before the first wash, run a cotton cy-

cle at the highest temperature without

electrolux 7

any laundry in the machine, to remove

any manufacturing residue from the

drum and tub. Pour 1/2 a measure of

detergent into the main wash com-

partment and start the machine.

Daily use

Load the laundry

Open the door by carefully pulling the door

handle outwards. Place the laundry in the

drum, one item at a time, shaking them out

as much as possible. Close the door.

Measure out the detergent and the fab-

ric softener

Pull out the dispenser drawer until it stops.

Measure out the amount of detergent re-

quired, pour it into the main wash compart-

ment

or in the appropriate compartment

if the selected programme/option it requires

(see more details in «Detergent dispenser

drawer»).

If required, pour fabric softener into the com-

partment marked

(the amount used must

not exceed the «MAX» mark in the drawer).

Close the drawer gently.

Select the required programme by

turning the programme selector dial (1)

You can choose the right programme for any

type of laundry following the descriptions on

the washing programme tables (see «Wash-

ing Programmes»). Turn the programme se-

lector dial to the required programme. The

programme selector determines the type of

washing cycle (e.g. water level, drum move-

ment, number of rinses) and the washing

temperature according to the type of laundry.

The pilot light of button 6 starts blinking and

the display shows the duration of the selec-

ted programme. The selector dial can be

turned either clockwise or counterclockwise.

Position « O » to Reset programme/Switch-

ing OFF the machine.

For the description of each washing pro-

grammes of the selector dial, consult the

chapter «Washing programmes».

At the end of the programme the selec-

tor dial must be turned to position O, to

switch the machine off.

8 electrolux

Caution! If you turn the programme

selector dial to another programme

when the machine is working, the red

pilot light of button 6 will blink 3 times

and the message Err is displayed on the

display to indicate a wrong selection.

The machine will not perform the new

selected programme.

Reduce the spin speed by pressing

button 2

When the required programme has been se-

lected, your appliance automatically propo-

ses the maximum spin speed provided for

that programme.

Press button 2 repeatedly to change the spin

speed, if you want your laundry to be spun at

a speed different from the one proposed by

the washing machine. The relevant light will

light up.

Select the available options by pressing

buttons 2, 3 and 4

Depending on the programme, different

functions can be combined. These must be

selected after choosing the desired pro-

gramme and before starting the programme.

When these buttons are pressed, the corre-

sponding pilot lights illuminate. When they

are pressed again, the pilot lights go out. If

an incorrect option is selected, the integrated

red pilot light of the button 6 flashes for 3

times.

For the compatibility among the washing

programmes and the options see chap-

ter «Washing Programmes».

Select the Delay Start by pressing

button 7

Before you start the programme, if you wish

to delay the start, press the button 7 repeat-

edly, to select the desired delay. The relevant

pilot light goes on.

The selected delay time value (up to 20

hours) will appear on the display a few sec-

onds, then the duration of the programme

will appear again.

You must select this option after you have set

the programme and before you press button

6 .

You can cancel or modify the delay time at

any moment, before you press button 6 .

Selecting the delayed start:

1. Select the programme and the required

options.

2. Select the delay start by pressing the but-

ton 7 .

3. Press button 6 :

– the machine starts its hourly count-

down.

– The programme will start after the se-

lected delay has expired.

Cancelling the delayed start after having

pressed button 6 :

1. Set the washing machine to PAUSE by

pressing button 6 .

2. Press button 6 once until the symbol 0’ is

displayed

3. Press button 8 again to start the pro-

gramme.

Important! The selected delay can be

changed only after selecting the washing

programme again.

The Delay Start can not be selected with

DRAIN programme.

Start the programme by pressing button

To start the selected programme, press the

button 6 , the corresponding green pilot light

stops blinking. The pilot lights 8.1 and 8.2

illuminate to indicate that the appliance starts

operating and the door is locked.

To interrupt a programme which is running,

press the button 6 : the corresponding green

pilot light starts blinking.

To restart the programme from the point at

which it was interrupted, press the button 6

again . If you have chosen a delayed start,

the machine will begin the countdown.

If an incorrect option is selected, the red pilot

light of the button 6 blinks for 3 times the

message Err is displayed for a few seconds.

Altering an option or a running

programme

It is possible to change some options before

the programme carries them out.

Before you make any change, you must

PAUSE the appliance by pressing the button

6 .

Changing a running programme is possible

only by resetting it. Turn the programme se-

lector dial to O and then to the new pro-

gramme position. Start the new programme

by pressing the button 6 again. The washing

water in the tub will be not emptied out.

electrolux 9

Interrupting a programme

Press the button 6 to interrupt a programme

which is running, the corresponding green

pilot light starts blinking.

Press the button again to restart the pro-

gramme.

Cancelling a programme

Turn the selector dial to O to cancel a pro-

gramme which is running.

You can select now a new programme.

Opening the door

After the programme has started (or during

the delay time) the door is locked, if you need

to open it, set first the machine to PAUSE by

pressing the button 6 . After a few minutes

the light 8.2 goes out and it is possible to

open the door.

If this light remains lit and the door is locked,

this means that the machine is already heat-

ing or that the water level is too high. In any

case, do not try to force the door!

If you cannot open the door but you need to

open it you have to switch the machine off by

turning the selector dial to O . After a few mi-

nutes the door can be opened (pay atten-

tion to the water level and tempera-

ture!) .

After closing the door, it is necessary to se-

lect the programme and options again and to

press button 6 .

At the end of the programme

The machine stops automatically. The pilot

light of button 6 , the pilot lights 8.1 and

8.2 go off. The light 8.3 illuminates.

If a programme or an option that ends with

water left in the tub has been selected, the

pilot light 8.2 remains on and the door is

locked to indicate that the water must be

emptied out before opening the door.

Follow the below instructions to empty out

the water:

1. Turn the programme selector dial to O .

2. Select the draining or spinning pro-

gramme.

3. Reduce the spin speed if needed, by

pressing the relevant button.

4. Press button 6 .

At the end of the programme, the light 8.2

goes off to indicate that the door can be now

opened. Turn the programme selector dial to

O to switch the machine off.

Remove the laundry from the drum and care-

fully check that the drum is empty. If you do

not intend to carry out another wash, close

the water tap. Leave the door open to pre-

vent the formation of mildew and unpleasant

smells.

Stand By: If your laundry is not removed

within 10 minutes after the programme is fin-

ished, the back light of the display switches

off and the energy saving system will be en-

abled. Only the pilot light of the button 6 is

blinking to indicate that the appliance has to

be switched off. By pressing any button the

appliance will come out from the energy sav-

ing status and you can set another pro-

gramme or switch the appliance off.

Helpful hints and tips

Sorting out the laundry

Follow the wash code symbols on each gar-

ment label and the manufacturer’s washing

instructions. Sort the laundry as follows:

whites, coloureds, synthetics, delicates,

woollens.

Temperatures

95° or 90°

for normally soiled white cot-

tons and linen (e.g. tea cloths,

towels, tablecloths, sheets...)

60°/50°

for normally soiled, colour fast

garments (e.g. shirts, night

dresses, pyjamas....) in linen,

cotton or synthetic fibres and

for lightly soiled white cotton

(e.g. underwear)

40°-30°-

Cold

for delicate items (e.g. net cur-

tains), mixed laundry including

synthetic fibres and woollens

bearing the label «pure new

wool, machine washable, non-

shrink»

10 electrolux

Before loading the laundry

Never wash whites and coloureds together.

Whites may lose their «whiteness» in the

wash.

New coloured items may run in the first wash;

they should therefore be washed separately

the first time.

Make sure that no metal objects are left

in the laundry (e.g. hair clips, safety pins,

pins).

Button up pillowcases, close zip fasteners,

hooks and poppers. Tie any belts or long

tapes.

Remove persistent stains before washing.

Rub particularly soiled areas with a special

detergent or detergent paste.

Treat curtains with special care. Remove

hooks or tie them up in a bag or net.

Maximum loads

Recommended loads are indicated in the

washing programme charts.

General rules:

•

Cotton, linen: drum full but not too tightly

packed;

• Synthetics: drum no more than half full;

•

Delicate fabrics and woollens: drum no

more than one third full.

Washing a maximum load makes the most

efficient use of water and energy.

For heavily soiled laundry, reduce the load

size.

Laundry weights

The following weights are indicative:

bathrobe 1200 g

quilt cover 700 g

man’s work shirt 600 g

sheet, man’s pyjamas 500 g

tablecloth 250 g

pillow case, towelling towel,

night dress, man’s shirt

200 g

tea cloth, ladies’ briefs, nap-

kin, blouse, men’s underpants

100 g

Removing stains

Stubborn stains may not be removed by just

water and detergent. It is therefore advisable

to treat them prior to washing.

Blood: treat fresh stains with cold water. For

dried stains, soak overnight in water with a

special detergent then rub in the soap and

water.

Oil based paint: moisten with benzine stain

remover, lay the garment on a soft cloth and

dab the stain; treat several times.

Dried grease stains: moisten with turpen-

tine, lay the garment on a soft surface and

dab the stain with the fingertips and a cotton

cloth.

Rust: oxalic acid dissolved in hot water or a

rust removing product used cold. Be careful

with rust stains which are not recent since the

cellulose structure will already have been

damaged and the fabric tends to hole.

Mould stains: treat with bleach, rinse well

(whites and fast coloureds only).

Grass: soap lightly and treat with bleach

(whites and fast coloureds only).

Ball point pen and glue: moisten with ace-

tone

, lay the garment on a soft cloth and

dab the stain.

Lipstick: moisten with acetone as above,

then treat stains with methylated spirits.

Treat any residual marks with bleach.

Red wine: soak in water and detergent,

rinse and treat with acetic or citric acid, then

rinse. Treat any residual marks with bleach.

Ink: depending on the type of ink, moisten

the fabric first with acetone

, then with acetic

acid; treat any residual marks on white fab-

rics with bleach and then rinse thoroughly.

Tar stains: first treat with stain remover, me-

thylated spirits or benzine, then rub with de-

tergent paste.

Detergents and additives

Good washing results also depend on the

choice of detergent and use of the correct

quantities to avoid waste and protect the en-

vironment.

Although biodegradable, detergents contain

substances which, in large quantities, can

upset the delicate balance of nature.

The choice of detergent will depend on the

type of fabric (delicates, woollens, cottons,

etc.), the colour, washing temperature and

degree of soiling.

All commonly available washing machine de-

tergents may be used in this appliance:

• powder detergents for all types of fabric

1) do not use acetone on artificial silk

electrolux 11

• powder detergents for delicate fabrics

(60°C max) and woollens

• liquid detergents, preferably for low tem-

perature wash programmes (60°C max)

for all types of fabric, or special for wool-

lens only.

The detergent and any additives must be

placed in the appropriate compartments of

the dispenser drawer before starting the

wash programme.

If using liquid detergents, a programme

without prewash must be selected.

Your appliance incorporates a recirculation

system which allows an optimal use of the

concentrated detergent.

Follow the product manufacturer’s recom-

mendations on quantities to use and do not

exceed the «MAX» mark in the detergent

dispenser drawer .

Degrees of water hardness

Water hardness is classified in so-called “de-

grees” of hardness. Information on hardness

of the water in your area can be obtained

from the relevant water supply company, or

from your local authority.

A water softener must be added when

water has a medium-high degree of

hardness (from degree of hardness II).

Follow the manufacturer’s instructions.

The quantity of detergent can then al-

ways be adjusted to degree of hardness

I (= soft).

Level

Charac-

teristic

Degrees of water

hardness

German

°dH

French

°T.H.

1 soft 0-7 0-15

2 medium 8-14 16-25

3 hard 15-21 26-37

4 very hard > 21 > 37

Washing programmes

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Spin Speed

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

COTTONS

90°-60°

Main wash - Rinses

Maximum spin speed 1400 rpm

Max. load 7 kg - Red. load 3.5 kg

For white cottons (heavy soiled items).

SPIN

NIGHT CYCLE

RINSE HOLD

PREWASH

INTENSIVE

SUPER QUICK

EXTRA RINSE

COTTONS ECONOMY

60°

Main wash - Rinses

Maximum spin speed 1400 rpm

Max. load 7 kg

White and fast coloured cotton.

This programme can be selected for slightly or normally

soiled cotton items. The temperature will decrease and the

washing time will be extended. This allows to obtain a good

washing efficiency so saving energy.

SPIN

NIGHT CYCLE

RINSE HOLD

PREWASH

EXTRA RINSE

12 electrolux

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Spin Speed

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

COTTONS ECONOMY

40°

Main wash - Rinses

Maximum spin speed 1400 rpm

Max. load 7 kg

For coloured cotton.

This programme can be selected for slightly or normally

soiled cotton items. The temperature will decrease and the

washing time will be extended. This allows to obtain a good

washing efficiency so saving energy.

SPIN

NIGHT CYCLE

RINSE HOLD

PREWASH

EXTRA RINSE

COTTONS

40°

Main wash - Rinses

Maximum spin speed 1400 rpm

Max. load 7 kg - Red. load 3.5 kg

For coloured cottons (lightly soiled items).

SPIN

NIGHT CYCLE

RINSE HOLD

PREWASH

INTENSIVE

SUPER QUICK

EXTRA RINSE

SYNTHETICS

50°-40°

Main wash - Rinses

Maximum spin speed 900 rpm

Max. load 3.5 kg - Red. load 2 kg

Synthetic or mixed fabrics: underwear, coloured gar-

ments, non-shrink shirts, blouses.

SPIN

NIGHT CYCLE

RINSE HOLD

PREWASH

INTENSIVE

SUPER QUICK

EXTRA RINSE

SYNTHETICS EASY IRON

40°

Main wash - Rinses

Maximum spin speed 900 rpm

Max. load 1.5 kg

Selecting this programme the laundry is gently washed and

spun to avoid any creasing. In this way ironing is easier. Fur-

thermore the machine will perform additional rinses.

SPIN

RINSE HOLD

PREWASH

EXTRA RINSE

DELICATES

40°-30°

Main wash - Rinses

Maximum spin speed 700 rpm

Max. load kg 3.5 - Red. load kg 2

Delicate fabrics: acrylics, viscose, polyester.

NIGHT CYCLE

RINSE HOLD

PREWASH

INTENSIVE

SUPER QUICK

EXTRA RINSE

RINSES

Rinses

Maximum spin speed 1400 rpm

Max. load 7 kg

With this programme it is possible to rinse and spin cotton

garments which have been washed by hand. The machine

performs 3 rinses, followed by a final long spin. The spin

speed can be reduced by pressing the relevant button.

SPIN

NIGHT CYCLE

RINSE HOLD

EXTRA RINSE

electrolux 13

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Spin Speed

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

DRAIN

Draining of water

Max. load 7 kg

For emptying out the water of the last rinse in programmes

with the Night Cycle and Rinse Hold option selected.

SPIN

Drain and long spin

Maximum spin speed 1400 rpm

Max. load 7 kg

Separate spin for hand washed garments and after pro-

grammes with the Rinse Hold and Night Cycle option se-

lected. You can choose the spin speed by pressing the rel-

evant button to adapt it to the fabrics to be spun.

SPIN

WOOL

40°

Main wash - Rinses

Maximum spin speed 900 rpm

Max. load 2 kg

Washing programme for machine washable wool as well as

for hand washable woollens and delicate fabrics. Note : A

single or bulky item may cause imbalance. If the appliance

doesn’t perform the final spin phase, add more items, re-

distribute the load manually and then select the spinning

programme.

SPIN

NIGHT CYCLE

RINSE HOLD

HANDWASH

30°-Cold

Main wash - Rinses

Maximum spin speed 900 rpm

Max. load 2 kg

Special programme for delicate fabrics with «hand washing»

care symbol.

SPIN

NIGHT CYCLE

RINSE HOLD

MINI 30

30°

Main wash - Rinses

Maximum spin speed 700 rpm

Max. load 2 kg

Ideal for laundry which is lightly soiled or which only needs

freshening up.

SILK

30°

Main wash - Rinses

Maximum spin speed 700 rpm

Max. load 1 kg

Delicate washing programme suitable for silk and mixed

synthetic items.

NIGHT CYCLE

RINSE HOLD

14 electrolux

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Spin Speed

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

SPORT SHOES

40°

Main wash - Rinses

Maximum spin speed 900 rpm

Max. load 1 kg

For sport shoes.

SPIN

NIGHT CYCLE

RINSE HOLD

PREWASH

EXTRA RINSE

SPORT INTENSIVE

40°

Prewash-Main wash - Rinses

Maximum spin speed 900 rpm

Max. load 2.5 kg

This programme is suitable for washing heavily soiled sport

items. The machine will add automatically a prewash phase

before the main wash to eliminate mud stains. The washing

temperature is 40°C.

SPIN

NIGHT CYCLE

RINSE HOLD

EXTRA RINSE

O = OFF

For cancelling the programme which is running or to switch the machine off .

1) If you select the Super Quick option by pressing button 3 , we recommend that you reduce the

maximum load as indicated. (Red. load = reduced load). Full loading is possible however with

somewhat reduced cleaning results.

2) If using liquid detergents, a programme without PREWASH must be selected.

Care and cleaning

Warning! You must disconnect the

appliance from the electricity supply,

before you can carry out any cleaning or

maintenance work.

Descaling

The water we use normally contains lime. It

is a good idea to periodically use a water

softening powder in the machine. Do this

separately from any laundry washing, and

according to the softening powder manufac-

turer's instructions. This will help to prevent

the formation of lime deposits.

After each wash

Leave the door open for a while. This helps

to prevent mould and stagnant smells form-

ing inside the appliance. Keeping the door

open after a wash will also help to preserve

the door seal.

Maintenance wash

With the use of low temperature washes it is

possible to get a build up of residues inside

the drum.

We recommend that a maintenance wash be

performed on a regular basis.

To run a maintenance wash:

• The drum should be empty of laundry.

• Select the hottest cotton wash pro-

gramme.

• Use a normal measure of detergent, must

be a powder with biological properties.

External cleaning

Clean the exterior cabinet of the appliance

with soap and water only, and then dry thor-

oughly.

Important! Do not use methylated spirits,

solvents or similar products to clean the

cabinet.

Cleaning the dispenser drawer

The detergent dispenser drawer should be

cleaned regularly.

1. Remove the detergent dispenser drawer

by pulling it firmly. Remove any traces of

accumulated powder. To aid cleaning,

the top part of the additive compartment

should be removed.

electrolux 15

2. Remove the conditioner insert from the

middle compartment.

3. Clean all parts with water.

4. Put the conditioner insert in as far as it will

go, so that it is firmly in place

5. Clean all parts of the machine, especially

the nozzles in the top of the washing-in

chamber, with a brush.

6. Insert the detergent dispenser drawer in

the guide rails and push it in.

Washing drum

Rust deposits in the drum may occur due to

rusting foreign bodies in the washing or tap

water containing iron.

Important! Do not clean the drum with

acidic descaling agents, scouring agents

containing chlorine or iron or steel wool.

1. Remove any rust deposits on the drum

with a cleaning agent for stainless steel.

2. Run a washing cycle without any washing

to clean off any cleaning agent residues.

Programme: Short Cotton Programme at

maximum temperature and add approx.

1/4 measuring cup of detergent.

Door seal

Check from time to time the door seal and

eliminate eventual possible objects that

could be trapped in the fold.

16 electrolux

Drain pump

The pump should be inspected regularly and

particularly if:

• the machine does not empty and/or spin

• the machine makes an unusual noise dur-

ing draining due to objects such as safety

pins, coins etc. blocking the pump.

Proceed as follows:

1. Disconnect the appliance.

2. If necessary wait until the water has

cooled down.

3. Open the pump door.

4. Place a container close to the pump to

collect any spillage.

5. Release the emergency emptying hose,

place it in the container and remove its

cap cover.

6. When no more water comes out, un-

screw the pump and remove it. Always

keep a rag nearby to dry up spillage of

water when removing the pump.

7. Remove any objects from the pump im-

peller by rotating it.

8. Refit the cap on the emergency empty-

ing hose and place the latter back in its

seat.

9. Screw the pump fully in.

10. Close the pump door.

Warning!

When the appliance is in use and depending

on the programme selected there can be hot

water in the pump. Never remove the pump

cover during a wash cycle, always wait until

the appliance has finished the cycle, and is

empty. When replacing the cover, ensure it

is securely retightened so as to stop leaks

and young children being able to remove it.

electrolux 17

Cleaning the water inlet filter

If you notice that the machine is taking longer

to fill, check that the filter in the water inlet

hose is not blocked.

1. Turn off the water tap.

2. Unscrew the hose from the tap.

3. Clean the filter in the hose with a stiff

brush.

4. Screw the hose back onto the tap.

Emergency emptying out

If the water is not discharged, proceed as

follows to empty out the machine:

1. pull out the plug from the power socket;

2. close the water tap;

3. if necessary, wait until the water has

cooled down;

4. open the pump door;

5. place a bowl on the floor and place the

end of the emergency emptying hose into

the bowl. Remove its cap. The water

should drain by gravity into the bowl.

When the bowl is full, put the cap back

on the hose. Empty the bowl. Repeat the

procedure until water stops flowing out;

6. clean the pump if necessary as previously

described;

7. replace the emergency emptying hose in

its seat after having plugged it;

8. screw the pump again and close the

door.

Frost precautions

If the machine is installed in a place where the

temperature could drop below 0°C, proceed

as follows:

1. Turn off the water tap.

2. Unscrew the inlet hose.

3. Place the end of the emergency emptying

hose and that of the inlet hose in a bowl

placed on the floor and let water drain

out.

4. Screw the water inlet hose back on and

reposition the emergency emptying hose

after having put the cap on again.

5. When you intend to start the machine up

again, make sure that the room temper-

ature is above 0°C.

What to do if…

Certain problems are due to lack of simple

maintenance or oversights, which can be

solved easily without calling out an engineer.

Before contacting your local Service Centre,

please carry out the checks listed below.

During machine operation it is possible that

the red pilot light of button 6 blinks, one of

the following alarm codes appears on the

display and at the same some acoustic sig-

nals sound every 20 seconds to indicate that

the machine is not working:

• E10 : problem with the water supply.

• E20 : problem with the water draining.

•

E40 : door open.

Once the problem has been eliminated,

press the button 6 to restart the programme.

If after all checks, the problem persists, con-

tact your local Service Centre.

18 electrolux

Problem Possible cause/Solution

The washing machine does

not start:

The door has not been closed. E40

•Close firmly the door.

The plug is not properly inserted in the power socket.

• Insert the plug into the power socket.

There is no power at the socket.

• Please check your domestic electrical installation.

The main fuse has blown.

• Replace the fuse.

The selector dial is not correctly positioned and the button 6 has not

been depressed.

• Please turn the selector dial and press the button 6 again.

The delay start has been selected.

• If the laundry are to be washed immediately, cancel the delay start.

The machine does not fill:

The water tap is closed. E10

•Open the water tap.

The inlet hose is squashed or kinked. E10

• Check the inlet hose connection.

The filter in the inlet hose is blocked. E10

• Clean the water inlet hose filter.

The door is not properly closed. E40

•Close firmly the door.

The machine does not emp-

ty and/or does not spin:

The drain hose is squashed or kinked. E20

• Check the drain hose connection.

The drain filter is clogged. E20

• Clean the drain filter.

An option or a programme that ends with the water still in the tub or

a that eliminates all the spinning phases has been selected.

• Disable the option.

• Select the draining or spinning programme.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

There is water on the floor:

Too much detergent or unsuitable detergent (creates too much

foam) has been used.

• Reduce the detergent quantity or use another one.

Check whether there are any leaks from one of the inlet hose fittings.

It is not always easy to see this as the water runs down the hose;

check to see if it is damp.

• Check the water inlet hose connection.

The drain hose is damaged.

• Change it with a new one.

The cap on the emergency emptying hose has not been replaced

or the filter has not been properly screwed in after cleaning action.

• Refit the cap on the emergency emptying hose or screw the filter

fully in.

Unsatisfactory washing re-

sults:

Too little detergent or unsuitable detergent has been used.

• Increase the detergent quantity or use another one.

Stubborn stains have not been treated prior to washing.

• Use commercial products to treat the stubborn stains.

The correct temperature was not selected.

• Check if you have selected the correct temperature.

Excessive laundry load.

• Reduce the laundry load.

electrolux 19

Problem Possible cause/Solution

The door will not open:

The programme is still running.

• Wait the end of washing cycle.

The door lock has not been released.

• Wait until the pilot light 8.2 has gone out.

There is water in the drum.

• Select drain or spin programme to empty out the water.

The machine vibrates is

noisy:

The transit bolts and packing have not been removed.

• Check the correct installation of the appliance.

The support feet have not been adjusted

• Check the correct levelling of the appliance.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

Maybe there is very little laundry in the drum.

• Load more laundry.

The machine makes an un-

usual noise:

The machine is fitted with a type of motor which makes an unusual

noise compared with other traditional motors. This new motor en-

sures a softer start and more even distribution of the laundry in the

drum when spinning, as well as increased stability of the machine.

No water is visible in the

drum:

Machines based on modern technology operate very economically

using very little water without affecting performance.

If you are unable to identify or solve the prob-

lem, contact our service centre. Before tele-

phoning, make a note of the model, serial

number and purchase date of your machine:

the Service Centre will require this informa-

tion.

Mod. ... ... ...

Prod. No. ... ... ...

Ser. No. ... ... ...

. .

...

Technical data

Dimensions Width

Height

Depth

60 cm

85 cm

63 cm

Electrical connection

Voltage - Overall power - Fuse

Information on the electrical connection is given on the rating plate,

on the inner edge of the appliance door.

Water supply pressure Minimum

Maximum

0,05 MPa

0,8 MPa

Maximum Load Cotton 7 kg

Spin Speed Maximum 1400 rpm

20 electrolux

La page charge ...

Electrolux EWF14380W Manuel utilisateur

Marque: Electrolux

Modèle: EWF14380W

Catégorie: Machines à laver

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Electrolux EWF14380W User manual

Electrolux EWF14380W Manuel utilisateur

Electrolux EWF14380W Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents