Dwyer Instruments Series DP3 Manuel utilisateur
- Taper
- Manuel utilisateur
Series DP3 Wireless Differential Pressure Manometer
Specications - Installation and Operating Instructions
Bulletin TE-DP3
The Series DP3 Wireless Differential Pressure Manometer is a compact, highly
accurate, auto-ranging differential pressure manometer ideal for low ow applications.
The Series DP3 is used in conjunction with the Dwyer Mobile Meter® application
software to view pressure drop across lters, static pressure in ducts, and velocity
pressures from pitot tubes or air ow stations.
The Series DP3 includes a differential pressure sensor with positive and negative
ports for differential and static pressure readings, a LED indicator, and a rechargeable
lithium-ion battery; which can be charged via Mini-USB. The Series DP3 Utilizes
Bluetooth® Low Energy (BLE) to communicate wirelessly in real-time with the Dwyer
Mobile Meter® application software.
FEATURES/BENEFITS
• Auto-ranging technology maintains optimal performance down to 0.1˝ H20
• LED indicator displays manometer status, connection, charging and logging to the
user
• Over-the-air updates ensure the manometer has the latest rmware
• Unit can be mounted on both the pitot and velocity grid
• Rechargeable battery allows for a 10 hour battery life
• One button design allows for easy operation and simple logging
• Rugged case allows for a 10´ drop without compromising functionality
• Automatically corrects pressure reading depending on the inclination of the
manometer
APPLICATIONS
• Non-corrosive dry gases
• Building commissioning
• Building HVAC test and balance
• Industrial process verication
• Instrumentation validation
SPECIFICATIONS
Service: Non-corrosive dry gases.
Wetted Materials: Zinc plated brass; Silicon.
Accuracy: ±0.5% FS span @ 25°C (includes non linearity, hysteresis, and non
repeatability).
Pressure Limits: ±10 in w.c. (±2.5 kPa) .
Temperature Limits: Operating: -4 to 140°F (-20 to 60°C); Storage: -40 to 185°F
(-40 to 85°C).
Power Requirements: 3.7 V lithium ion battery, user rechargeable; Wireless
distance: 50´ (15 m).
Weight: 3.3 oz (93.55 g).
Electrical Connections: Female mini-USB.
Hose Connections: Two barbed connections for use with 1/8˝ (3.18 mm) or 3/16˝
(4.76 mm) ID tubing.
Compliance: CE, FCC.
2.534
4.166
1.238
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference. and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Cet appareil est conforme à des règlements d’Industrie Canada exempts de licence
standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes:
(1) Ce dispositif ne doit pas causer d’interférences nuisibles, et (2) cet appareil doit
accepter toute interférence reçue, y compris les interférences pouvant entraîner un
fonctionnement indésirable.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du
Canada.
CHARGING BATTERY
When the charge of the battery is almost used up, the LED on the manometer of the
wireless probe will turn solid red. There is approximately 5 minutes of battery life left at
this point. If the manometer is not already paired to the base unit, it will not pair while
in low battery condition.
Step 1: Plug the mini-USB connector end of the cable into the bottom of the
manometer.
Step 2: Plug the USB connector end of the cable into the port on the charger or PC
(LED on the charger and the manometer should both light up).
Step 3: The LED on the manometer will turn off when fully charged.
Step 4: Remove USB cable from the manometer and the charger or PC.
NOTICE
If desired, the DP3 can be operated with USB powered cables less
than 3 m in length when connected to the charger or PC.
It is required before the initial use of the manometer to fully charge
the battery for 12 hours.
NOTICE
NOTICE
Lithium ion batteries are very volatile and can cause a re if
punctured or severely damaged. Only use a Dwyer Instruments,
Inc. approved charging device in a well ventilated area away from any ammable
materials or gases. Do not incinerate the battery. Only charge between 32 to 113°F
(0 to 45°C).
WARNING
DWYER INSTRUMENTS, INC.
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A.
Phone: 219-879-8000
Fax: 219-872-9057
www.dwyer-inst.com
e-mail: [email protected]
Printed in U.S.A. 8/22 FR# 444099-10 Rev. 2©Copyright 2022 Dwyer Instruments, Inc.
DWYER INSTRUMENTS, INC.
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A.
Phone: 219-879-8000
Fax: 219-872-9057
www.dwyer-inst.com
e-mail: [email protected]
Bluetooth® is a registered trademark of Bluetooth SIG, Inc.
CONNECTING THE DP3
For the latest instructions, please refer to the “Help” button in the Options menu in the
Mobile Meter® app.
1. Verify that the UHH4 or newer universal handheld device, or a smart device with
the Dwyer Mobile Meter® app has Bluetooth® technology turned on. Open the
Mobile Meter® app by clicking on the icon.
2. Press “Without Bridge”.
3. The next screen will display a message that reads “Searching For Probes”. When
the DP3 is turned on and discovered by Mobile Meter® the
name of the probe will appear on the screen. Click the checkbox next to the desired
probe.
4. Use the back button or navigation arrow to go back to the Probes List page.
MAINTENANCE/REPAIR
Upon nal installation of the Series DP3, no routine maintenance is required. The
Series DP3 is not eld serviceable and is not possible to repair the unit. Field repair
should not be attempted and may void warranty.
WARRANTY/RETURN
Refer to “Terms and Conditions of Sale” in our catalog and on our website. Contact
customer service to receive a Return Goods Authorization number before shipping the
product back for repair. Be sure to include a brief description of the problem plus any
additional application notes.
If a manometer does not appear, power the manometer down,
then power it back on.
NOTICE
LED INDICATER
State Color Timing
Battery is Charging Green Solid On
Low Battery Red Solid On
Low Power State All Off Solid Off
Probe Initializing Amber Blinking (mostly on with a
short time off)
Waiting to Communicate with Handheld Amber Blinking (mostly off with a
short time on)
Communicating with Handheld Green Blinking
This symbol indicates waste electrical products should not be disposed
of with household waste. Please recycle where facilities exist. Check with
your Local Authority or retailer for recycling advice.
-
1
-
2
