Mantis Electric Tiller Cultivator Manuel utilisateur

Catégorie
Mini motoculteurs
Taper
Manuel utilisateur

Ce manuel convient également à

Electric Tiller/Cultivator
MAN 430199
Rev. C 4-10-18
Operators Manual and Safety Instructions for Electric Tiller/Cultivator
Original Operating Instructions
Manuel de l’utilisateur et consignes de sécurité pour la motobineuse électrique
Traduction des instructions originales
3550
2 Operators Manual
IMPORTANT MESSAGE
Thank you for purchasing this Mantis tiller/cultivator. You have purchased a world class
product, one of the best designed and built anywhere.
This Operators Manual contains Safety instructions. The useful life and good service
you receive from this machine depends to a large extent on how well you read and
understand this manual. Treat your machine properly, lubricate and adjust it as
instructed, and it will give you many years of reliable service.
Your safe use of this Mantis product is one of our prime design objectives. Many safety
features are built in, but we also rely on your good sense and care to achieve accident-free operation. For best protection, study the manual
thoroughly. Learn the proper operation of all controls. Observe all safety precautions. Follow all instructions and warnings completely. Do not
remove or defeat any safety features. Make sure those who operate this machine are as well informed and careful in its use as you are.
Mantis designs and builds its equipment to serve many years in a safe and productive manner. For longest life, use this machine only as directed
in the manual, keep it in good repair and follow safety warnings and instructions. You’ll always be glad you did.
SAFETY RULES & WARNINGS
Special Safety Information ................................................. 3
Safety & Warnings ............................................................. 3
Safety Decal Information ................................................3-4
Safety Do’s and Dont’s ..................................................... 5
ASSEMBLY
Parts .................................................................................. 6
Technical Specications .................................................... 7
Before Use ......................................................................... 8
Handle Assembly ............................................................ 8-9
Connecting to Power Supply ............................................. 9
OPERATION
Intended Use ................................................................... 10
Wheel Adjustment ............................................................ 10
Starting and Stopping ...................................................... 10
General Operation ........................................................... 11
Tilling ............................................................................... 11
MAINTENANCE AND STORAGE ...................................12-14
CHANGING THE TINES ...................................................... 13
STORAGE ............................................................................ 14
TRANSPORTATION ............................................................. 14
TROUBLESHOOTING ......................................................... 15
RECYCLING AND DISPOSAL ............................................. 15
LIMITED WARRANTY INFORMATION ................BACK PAGE
TABLE OF CONTENTS
Welcome to the World of Mantis Gardening
Schiller Grounds Care, Inc.
1028 Street Road
Southampton, PA 18966-4217 U.S.A.
PHONE (800) 366-6268 • FAX (215) 956-3855
This Operator’s Manual is an integral part of the machine. Suppliers of both new and
second-hand machines must make sure that this manual is provided with the machine.
THESE INSTRUCTIONS ARE FOR YOUR SAFETY. PLEASE READ THROUGH THEM
THOROUGHLY BEFORE USE AND RETAIN THEM FOR FUTURE REFERENCE.
PRODUCT REGISTRATION
YOU CAN REGISTER
YOUR MANTIS PRODUCT
ONLINE AT:
SCHILLERGC.COM/REGISTER
3Contact us at www.mantis.com
You will notice throughout this Operator’s Manual Safety Rules and Important Notes. Make sure you understand and obey these
warnings and all instructions for your own protection.
I. SPECIAL SAFETY INFORMATION
II. SAFETY & WARNINGS
III. SAFETY DECAL INFORMATION
On the product, the rating label, and within these instructions you will nd among others the following symbols and abbreviations.
Familiarize yourself with them to reduce hazards like personal injuries and damage to property.
Safety Rules & Warnings
To reduce the potential for accidents, comply
with the safety instructions in this manual.
Failure to comply may result in serious
personal injury, and/or equipment
and property damage.
Attention: This symbol points out our
important safety instructions.
When you see this symbol,
heed it’s warning!! Stay alert!!
Improper use or care of this tiller/cultivator or failure to wear proper
protection can result in serious injury. Read and understand the
rules for safe operation and all instructions in this manual. Wear
hearing and eye protection, proper non-slip footwear, long trousers,
protective covering to contain long hair and protective gloves.
CALIFORNIA Proposition 65 Warning
Battery post, terminals, wiring insulation, and related
accessories contain lead and lead compounds,
chemicals known to the Sate of California to cause
cancer, birth defects and other reproductive harm.
WASH HANDS AFTER HANDLING
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Lock / to tighten or secure.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Unlock / to loosen.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Note / Remark.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Caution / Warning.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Read the instruction manual.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Wear hearing protection.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Wear eye protection.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Wear a dust mask.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Wear protective gloves.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Wear protective, slip-resistant footwear.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Wear tight-tted protective clothes.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Remove plug from the mains immediately if the
cable is damaged or cut.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Do not expose the tiller/cultivator to rain or wet
conditions (moisture).
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Work across the slopes, never up and down.
4 Operators Manual
If the tiller/cultivator is used improperly or
safety precautions are not followed, the users
risk serious injury to themselves, others and
property. Read and understand this manual
before attempting to operate this tiller.
Moving parts will continue to run for several seconds
after turning off the tiller/cultivator. Wait until the
tines have completely stopped before lifting the tiller/
cultivator or conducting inspection and maintenance.
Some dust and debris created by the use of the tool could contain
chemicals known to the State of California to cause cancer and birth
defects or other reproductive harm. Some examples of these chemicals are:
• Chemicals in fertilizers
• Compounds in insecticides, herbicides and pesticides
Arsenic and chromium from chemically treated lumber
Your risk from exposure to these chemicals varies, and depends on how
often you do this type of work. To reduce your exposure, work in a well-
ventilated area and with approved safety equipment, such as dust masks
that are specially designed to lter out microscopic particles.
IV. WARNINGS
1. Never allow children or people unfamiliar
with these instructions to use the tiller/
cultivator. Local regulations can restrict
the age of the operator.
2. Keep children, bystanders, and pets
away – All spectators, including pets,
should be kept a safe distance away
from the work area.
3. Keep in mind that the operator or user
is responsible for accidents or hazards
occurring to people or property.
4. Dress properly - Always wear proper
non-slip footwear and long trousers while
working. Do not operate the product
when barefoot or wearing open sandals.
Do not wear loose clothing or jewelry
as such articles can become caught in
moving parts. Wear a protective covering
to contain long hair. Wearing protective
gloves is recommended when working
outdoors. Use safety glasses and
hearing protection.
5. Thoroughly inspect the area where the
tiller/cultivator is to be used and remove
all objects which can be thrown by the
product. Thrown objects can cause
serious personal injury and property
damage. Do not allow anyone in front of
a running tiller/cultivator.
III. SAFETY DECAL INFORMATION (CONTINUED)
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Inspect the area where the tiller/cultivator is
to be used and remove all objects which can
be thrown by the tiller/cultivator. If objects are
hidden while operating stop the motor, wait for
moving parts to stop and remove the object.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Objects thrown by the tiller/cultivator could hit
the user or other bystanders. Always ensure
that other people and pets remain at a safe
distance from the tiller/cultivator when it is in
operation. In general, children must not come
near the area where the tiller/cultivator is being
used or stored.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Keep extension cord (not supplied) away from
cutting device.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Tines continue to rotate after the tiller/
cultivator is switched off. Wait until all machine
components have completely stopped before
touching the tiller/cultivator.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Pay special attention when working on the
cutting device!
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Remove plug from the mains immediately if the
cable is damaged or cut.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Keep hands and feet away from sharp rotating
parts – danger of injury! When cleaning,
repairing, or inspecting, make certain the
working tool and all moving parts have
stopped.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
This product is of protection class II. That
means it is equipped with enhanced or double
insulation.
9
WEEE symbol. Waste electrical products should not be
disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or local store
for recycling advice.
WEEE symbol. Waste electrical products
should not be disposed of with household
waste. Please recycle where facilities exist.
Check with your Local Authority or local store
for recycling advice.
Read the instructions carefully. Be familiar with the controls and the proper use of the product.
CAUTION!
5Contact us at www.mantis.com
IV. WARNINGS
V. EMERGENCY
Familiarize yourself with the use of this product by reading of this instruction manual completely. Memorize the safety
directions and follow them to the letter. This will help to prevent risks and hazards.
1. Always stay alert when using this tiller/cultivator, so that you can recognize and handle risks early. Watch what you are doing. Use
common sense. Do not operate the tiller/cultivator when you are tired or under the inuence of drugs, alcohol, or other medication.
Fast intervention can prevent serious injury and damage to property.
2. Switch off and disconnect from the power supply if there are malfunctions. Have the tiller/cultivator checked by a qualied professional
and repaired, if necessary, before you operate it again.
3. Please call the Mantis customer service center at 1-800-366-6268 for assistance
.
6. Before using, always visually inspect
to see that the tines, tine bolts and tine
assembly are not worn or damaged.
Replace worn or damaged tines and
bolts in sets to preserve balance.
7. Maintain the tiller/cultivator with care
– Keep the cutting edges clean for
optimal performance and to reduce the
risk of injury. Inspect the extension cord
periodically and immediately replace it if
damaged. Keep the handles dry, clean,
and free from oil and grease. Follow the
additional recommendations described in
the maintenance section of this manual.
8. Avoid accidental starting – Do not carry
the garden tiller/cultivator with your nger
on the switch. Make sure the switch is off
before plugging-in or unplugging the unit.
9. Do not abuse the cord – Never pull the
tiller/cultivator by the cord or yank the
cord to disconnect it from the receptacle.
Keep the cord away from heat, oil, and
sharp edges.
10. Moving parts – Keep hands and feet
away from moving parts. Keep guards
in place and in proper working order.
11. Do not force the tiller/cultivator – It
will perform better with less likelihood
of personal or mechanical injury if it
is used at the rate for which it was
designed.
12. Do not overreach – Keep proper footing
and balance at all times.
13. On multi-bladed machines, take care as
rotating one tine can cause other tines
to rotate.
14. Keep work area clean and well-lit –
Cluttered, dark areas invite accidents.
Work only in daylight or in good articial
light.
15. Always be sure of your footing on
slopes.
16.
Walk, never run with the tiller/cultivator.
17.
Work across the slopes, never up and
down.
18. Exercise extreme caution when
changing direction on slopes.
19. Do not work on excessively steep
slopes.
20. Use extreme caution when reversing or
pulling the product towards you.
21. Start the motor carefully according to
manufacturer instructions and with feet
well away from the moving tines.
22. Do not put your hands or feet near or
under rotating parts.
23. Never pick up or carry a tiller/cultivator
while the motor is running.
24. Never operate the tiller/cultivator with
defective guards or shields, or without
safety devices, for example deectors
and/or catchers in place.
25. Stop the tiller/cultivator, and disconnect
it from the power supply. Make sure
that all moving parts have come to a
complete stop...
- before unclogging or changing the
tines.
- before checking, cleaning, servicing
or working on the machine.
- after striking a foreign object. Inspect
the tiller/cultivator for damage and
make repairs before restarting and
operating the machine.
- whenever you leave the tiller/
cultivator. Never leave the tiller/
cultivator running when unattended.
26. If the tiller/cultivator starts to vibrate
abnormally (check immediately)
- inspect for damage,
- check for and tighten any loose parts,
- replace or repair any damaged parts
27. Store idle tool indoors – When not in
use, the tiller/cultivator should be stored
indoors in a dry and high or locked-up
place out of the reach of children.
28. Avoid dangerous environments – Do
not use the tiller/cultivator in rain
or in damp or wet locations. Do not
operate the tiller/cultivator in gaseous
or explosive atmospheres or use
the tiller/cultivator near ammable or
combustible liquids. Motors in these
type of tools normally spark, and the
sparks might ignite fumes.
29. Check for damaged parts – Before
further use of the tiller/cultivator, a
guard or other part that is damaged
should be carefully checked to
determine that it will operate properly
and perform its intended function.
Check for alignment of moving parts,
binding of moving parts, breakage
of parts, mounting, and any other
condition that may affect its operation.
A guard or other part that is damaged
should be properly repaired or replaced.
30. Keep the tiller/cultivator free of grass,
leaves, or grease to reduce the chance
of re hazard.
31. The motor housing remains hot for a
short period after the tiller/cultivator is
turned OFF. Allow the motor housing
to cool completely before touching or
storing near combustible material.
32. Do not use near underground electric
cables, telephone, lines, pipes, or
hoses. If in doubt, contact your utility
or telephone company to locate
underground services.
33. Be aware that the tiller/cultivator may
unexpectedly bounce upward or jump
forward if the tines should strike buried
obstacles such as large stones, roots,
or stumps.
34. Don’t grasp the exposed tines or cutting
edges when picking up or holding the
tiller/cultivator.
6 Operators Manual
Assembly
10
Your product
Your product
1. On/off switch 10. Guard
2. Lock-off button 11. Wheels
3. Cord retainer 12. Steel blades
4. Upper handle 13. Gear box
5. Power cord with plug 14. Motor housing
6. Cord clip 15. Air outlet
7. Middle handle
8. Upper handle knob and bolt (2)
9. Middle handle knob and bolt (2)
1. On/off switch
2. Lock-off button
3. Cord retainer
4. Upper handle
5. Power cord with plug
6. Cord clip
7. Middle handle
8. Upper handle knob and bolt (2)
9. Middle handle knob and bolt (2)
10. Guard
11. Wheels
12. Steel Tines (blades)
13. Gear box
14. Motor housing
15. Two speed switch
1
2
3
4
5
6
7
9
10
11
12
13
14
8
15
7Contact us at www.mantis.com
Technical Specications
The sound values have been determined according to noise test code given in 2000/14/
EC. The sound intensity level for the operator may exceed 80dB(A) and ear protection
measures are necessary.
Adopt proper measures to protect yourself against vibration exposures. Take the whole work
process including times the tiller/cultivator is running under no load or switched off into
consideration. Proper measures include among others regular maintenance and care of the product
and accessories, keeping hands warm, periodic breaks and proper planning of work processes.
Voltage/ Frequency 120V /60 Hz
Rated Current 9 (A)
No Load Current 2.5 (A)
Motor Speed 16000r/min
Protection Class Class II or Double Insulated
Number of Tine Speeds 2
Tines Speed I 260 RPM
Tines Speed II 310 RPM
Tilling Width 12” (300mm)
Digging Depth 8” ( 200mm)
Weight 24.4Lbs
Wheels Height adjustment 3 settings
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
8 Operators Manual
BEFORE YOU START
Remove packing materials and unpack all parts and lay them
on a at, stable surface.
Make sure the delivery contents are complete and free of any
damage. If you nd that parts are missing or show damage do not
use the tiller/cultivator but contact the Mantis customer service
center at 1-800-366-6268 for assistance. Using an incomplete or
damaged tiller/cultivator represents a hazard to people and property.
Ensure that you have all the accessories and tools needed for
assembly and operation. This also includes suitable personal
protective equipment.
Assembly
TILLER/CULTIVATOR ASSEMBLY
The tiller/cultivator and the packaging are not
children’s toys! Children must not play with
plastic bags, sheets and small parts! There is
a danger of choking and suffocation!
The tiller/cultivator must be fully assembled before operation! Do not use tiller/cultivator that is only partly
assembled or assembled with damaged parts! Follow the assembly instructions step-by-step and use the
pictures provided as a visual guide to easily assemble the product! Do not connect the tiller/cultivator to
power supply before it is completely assembled! Failure to comply could result in accidental starting and
serious personal injury.
Attach the cable clips to the middle
handle bar
1
14
NOTE: Take care of small parts that are removed during
assembly or when making adjustments. Keep them secure to
avoid loss.
Handle bar
1.Attach the cable clips on the middle handle bar (Fig. 1).
2. Secure the middle handle to the lower handle using the first set of knobs,
bolts,and washers. Tighten the knobs on each side to ensure a secure fit (Fig.
2).
Secure the middle handle to the lower
handle using the rst set of knobs, bolts,
and plastic washers. Tighten the knobs
on each side to ensure a secure t.
2
14
NOTE: Take care of small parts that are removed during
assembly or when making adjustments. Keep them secure to
avoid loss.
Handle bar
1.Attach the cable clips on the middle handle bar (Fig. 1).
2. Secure the middle handle to the lower handle using the first set of knobs,
bolts,and washers. Tighten the knobs on each side to ensure a secure fit (Fig.
2).
Connect the upper handle to the middle
handle using the second set of knobs, bolts
and plastic washers. Tighten the knobs on
each side to ensure a secure t.
3
15
3. Connect the upper handle to the middle handle using the second set of knobs,
bolts and washers. Tighten the knobs on each side to ensure a secure fit (Fig.
3)
4. Secure the cable inside the cable clips (Fig. 4).
WARNING! Make sure all handle knobs are properly tightened
before using before using the product.
Connection to power supply
For safety reasons the product is equipped with a short power cord. Do not
connect the product directly to the power supply using this power cord. A proper
extension cord is required for operation. Observe the technical requirements for
this product when purchasing an extension cord.
NOTE: Take care of small parts that are removed during assembly
or when making adjustments. Keep them secure to avoid loss.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
9Contact us at www.mantis.com
Assembly (Continued)
Make sure all handle knobs are properly tightened
before using the product.
Use only a UL-, CSA-, or ETL- rated extension
cord for outdoor, all-weather use. Do not use
an extension cord over 100 ft (30m).
Check the voltage! The voltage must
comply with the information on the rating
label! If using an extension cord it must
be suitable for outdoor use with sockets
protected against water splashing.
For your safety, it is required that the plug attached to tiller/
cultivator is always connected to an extension cord! The
extension cord must be suitable for outdoor use with sockets
protected against water splashing! Ensure the extension cord
is of the proper size and type for your product (≥ 0.75 mm²)!
Ground fault circuit interrupter (GFCI) protection should be
provided on the circuit(s) or outlet(s) to be used for this electric
tiller/cultivator. Receptacles are available having built-in GFCI
protection and may be used for this measure of safety.
Secure the cable inside the cable clips.
Double the extension cord back,
about 12 inches (30 cm) from the end
and lead the loop through the hole
on the guard. Pull it over the cord
retainer and gently tug on the cord to
ensure that it is rmly secured
To prevent the short power cord
from disconnecting from the
extension cord during operation,
use the onboard extension cord
restraint hook and/or make a
knot with the two cords
Connect the power cord to the socket of the extension cord.
Make sure the on/off switch is not squeezed or otherwise engaged.
Connect the plug of extension cord into a
suitable socket.
Your tiller/cultivator is now ready to be used.
Do not abuse the cord. Never pull the tiller/
cultivator by the cord or yank the cord to
disconnect it from the receptacle. Keep the cord
away from heat, oil, and sharp edges.
4
1
2
3
4
5
6
15
3. Connect the upper handle to the middle handle using the second set of knobs,
bolts and washers. Tighten the knobs on each side to ensure a secure fit (Fig.
3)
4. Secure the cable inside the cable clips (Fig. 4).
WARNING! Make sure all handle knobs are properly tightened
before using before using the product.
Connection to power supply
For safety reasons the product is equipped with a short power cord. Do not
connect the product directly to the power supply using this power cord. A proper
extension cord is required for operation. Observe the technical requirements for
this product when purchasing an extension cord.
16
WARNING! For your safety, it is required that the plug attached
to this product is always connected to an extension cord! The
extension cord must be suitable for outdoor use with sockets
protected against water splashing! Ensure the extension cord is
of the proper size and type for your product (0.75 mm²)!
Always use a residual current supply (RCD) protected supply
1. Double the extension cord back, about 30 cm from the end and lead the loop
through the hole on the guard. Pull it over the cord retainer and gently tug on
the cord to ensure that it is firmly secured (Figs. 5).
2. Connect the power cord to the socket of the extension cord.
3. Make sure the on/off switch is not squeezed.
4. Connect the plug of extension cord into a suitable socket.
WARNING! Check the voltage! The voltage must comply with
the information on the rating label!
If using an extension cord it must be suitable for outdoor use
with sockets protected against water splashing.
5.
Your product is now ready to be used.
CONNECTION TO POWER SUPPLY
For safety reasons the tiller/cultivator is equipped with a short
power cord. Do not connect the tiller/cultivator directly to the power
supply using this power cord. A proper extension cord is required for
operation. Observe the technical requirements for this product when
purchasing an extension cord.
10 Operators Manual
Electric Tiller/Cultivator Operation
The wheels can be adjusted in 3 different positions. Always ensure the wheels are securely locked!
Do not attempt to use the tiller/cultivator with the wheels in any other position or unlocked!
INTENDED USE
This tiller/cultivator is intended for loosening and working up the soil in a garden and
for tilling coarse soil for mixing in fertilizer, peat and compost in planting areas. This
tiller/cultivator should not be used to till extremely dry or wet soil.
This tiller/cultivator should not be used in rain or humid environments.
For safety reasons it is essential to read the entire instruction manual before rst
operation and to observe all the instructions.
This tiller/cultivator is intended for private household use only, not for any commercial
trade use. It must not be used for any purposes other than those described.
TWO SPEEDS SWITCH
This product features a switch that allows operation
at one of two, preset speeds. The switch is located
on the back of the motor facing the operator. When
set on low speed (I) the digging tines will move
more slowly and deliberately than when set on
high speed (II). Select speed levels based upon
preference relating to job requirements. The speed
switch should only be engaged when the tiller/
cultivator is turned off and in a stationary position.
1. Press the lock-off button and hold it in position (Figure 1, step 1).
2. Squeeze the on/off switch to switch the tiller/cultivator on (Figure 1,
step 2), release the lock-off button afterwards.
3. Release the on/off switch to switch the tiller/cultivator off.
The wheels can be adjusted to 3 positions. Lower the wheel height for shallow soil
penetration. Raise the wheel height for deeper soil penetration.
Adjust the wheels when the tiller/cultivator is off, wait for moving parts to stop and
disconnected from the power supply. Tilt the tiller/cultivator forward to rest on the
motor housing. Grasp the wheel assembly by the axel and pull toward you. Move the
assembly up or down (as needed) and allow the pins on the assembly to slot into one
of the three pre-set positions.
WHEEL ADJUSTMENT
SWITCHING ON/OFF
19
Wheel adjustment
WARNING!
Always switch the product off and disconnect it from power
supply before making any adjustments!
The wheels can be adjusted to 3 positions.
1. Pull on the wheel and move it to required position, let go of the wheel and
make sure it locks in position (Figs. 6-8).
WARNING! The wheels can be adjusted in 3 different positions.
Always ensure the wheelsare securely locked! Do not attempt
to use the product with the wheels in any other position or
unlocked!
Switching on/off
1. Press the lock-off button and hold it in position (Fig. 9, step 1).
2. Squeeze the on/off switch to switch the product on (Fig. 9, step 2), release
the lock-off button afterwards.
3. Release the on/off switch to switch the product off.
19
Wheel adjustment
WARNING!
Always switch the product off and disconnect it from power
supply before making any adjustments!
The wheels can be adjusted to 3 positions.
1. Pull on the wheel and move it to required position, let go of the wheel and
make sure it locks in position (Figs. 6-8).
WARNING! The wheels can be adjusted in 3 different positions.
Always ensure the wheelsare securely locked! Do not attempt
to use the product with the wheels in any other position or
unlocked!
Switching on/off
1. Press the lock-off button and hold it in position (Fig. 9, step 1).
2. Squeeze the on/off switch to switch the product on (Fig. 9, step 2), release
the lock-off button afterwards.
3. Release the on/off switch to switch the product off.
19
Wheel adjustment
WARNING!
Always switch the product off and disconnect it from power
supply before making any adjustments!
The wheels can be adjusted to 3 positions.
1. Pull on the wheel and move it to required position, let go of the wheel and
make sure it locks in position (Figs. 6-8).
WARNING! The wheels can be adjusted in 3 different positions.
Always ensure the wheelsare securely locked! Do not attempt
to use the product with the wheels in any other position or
unlocked!
Switching on/off
1. Press the lock-off button and hold it in position (Fig. 9, step 1).
2. Squeeze the on/off switch to switch the product on (Fig. 9, step 2), release
the lock-off button afterwards.
3. Release the on/off switch to switch the product off.
Transport position Work position (low) Work position (high)
20
Fig.9
1.
2.
Figure 1
Always switch the product off and
wait for moving parts to stop.
Disconnect it from power supply
before making any adjustments!
11Contact us at www.mantis.com
Electric Tiller/Cultivator Operation (Continued)
GENERAL OPERATION
1. Check the tiller/cultivator, its power cord and plug as well as accessories for damage
before each use. Do not use tiller/cultivator if it is damaged or shows wear.
2. Double check that the tines are properly fastened.
3. Always hold the tiller/cultivator by its handles. Keep the handles dry to ensure safe
support.
4. During transportation of the tiller/cultivator, the operator must control the handles with
two hands.
5. Ensure that the air vents are always unobstructed and clear. Clean them if necessary
with a soft brush. Blocked air vents may lead to overheating and damage the product.
6. Switch the tiller/cultivator off immediately and wait for moving parts to stop if you are
interrupted while working by other people entering the working area. Always let the
tiller/cultivator come to a complete stop before taking your eyes off the machine.
7. Do not overwork yourself. Take regular breaks to ensure you can concentrate on the
work and have full control over the tiller/cultivator.
In some countries regulations dene
at what time of the day and on what
special days products are allowed
to be used and what restrictions
apply! Ask your community for
detailed information and observe
the regulations in order to preserve
a peaceful neighborhood and avoid
committing administrative offences!
23
ensures that all the ground is tilled without missing any spots.
Fig.3
7. Pay special attention when changing direction. Apply light pressure onto the
handle so that the tines are lifted to make a turn. Turn the product around
guided by the wheels. Gradually release pressure and move the tines back to
the ground.
WARNING! Stop the motor, if the product strikes a foreign
object! Switch the product off, disconnect it from the power
supply and let it cool down. Inspect the product thoroughly for
damage! Have any damage repaired before restarting!
Extensive vibration of the product during operation is an
indication of damage! Stop the motor. The product should be
promptly inspected and repaired!
After use
1. Switch the product off, disconnect it from the power supply and let it cool
down.
2. Check, clean and store the product as described below.
22
Tilling
1. Make sure that the working area is clear of stones, sticks, wire or other
objects that could damage the product or its engine.
2. Do not till very wet soil because it tends to stick to the working tool preventing
the proper rotation, and it could also cause you to slip and fall.
3. Always maintain a firm grip on the product. For better guidance apply light
pressure to the handles (Fig. 10).
WARNING! Never carry this product as the person in fig. 11 is
doing. If you do, and the tines engage, you could suffer serious
injury.
Fig. 1
Fig. 2
4. Do not try to till too deeply or force the product into soil that is extremely hard
or resistant.
5. Walk the product through the soil at a normal pace and in as straight a line as
possible.
6. Till in slight overlapping rows. The most effective pattern for tilling soils is
moving the product up and down in verticals lines, then move the product in
horizontal lines from left to right (Fig. 12). This will keep the rows even and
for reference, adjust
to match sample
Never carry this tiller/
cultivator as the person in
gure 4 is doing. If you do,
and the tines engage, you
could suffer serious injury.
Stop the motor, if the tiller/cultivator strikes a foreign object!
Switch the tiller/cultivator off, wait for moving parts to stop,
disconnect it from the power supply and let it cool down.
Inspect the tiller/cultivator thoroughly for damage! Have any
damage repaired before restarting! Extensive vibration of the
tiller/cultivator during operation is an indication of damage!
Stop the motor. The tiller/cultivator should be promptly
inspected and repaired!
Figure 2
Figure 3
Figure 4
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
TILLING
1. Make sure that the working area is clear of stones, sticks, wire or other
objects that could damage the tiller/cultivator or its motor. Be aware that the
tiller/cultivator may unexpectedly bounce upward or jump forward if the tines
should strike buried obstacles such as large stones, roots, or stumps.
2. Do not till very wet soil because it tends to accumulate around the tines,
preventing proper rotation. It could also cause you to slip and fall.
3. Always maintain a rm grip on the tiller/cultivator. For better guidance apply
light pressure to the handles (Figure 2). Hold onto the tiller/cultivator with both
hands during operation. Ensure the grips are dry.
4. Do not try to till too deeply or force the product into soil that is extremely hard
or resistant.
5. Walk the tiller/cultivator backwards through the soil at a normal pace and in as
straight a line as possible.
6. Till in slight overlapping rows. The most effective pattern for tilling soils is
moving the tiller/cultivator up and down in vertical lines, then move the tiller/
cultivator in horizontal lines from left to right (Figure 3). This will keep the rows
even and ensures that all the ground is tilled without missing any spots.
7. Pay special attention when changing direction. Apply light pressure onto the
handle so that the tines are lifted to make a turn. Turn the product around
guided by the wheels. Gradually release pressure and move the tines back to
the ground.
12 Operators Manual
Electric Tiller/Cultivator Care
AFTER USE
1. Switch the tiller/cultivator off, wait for moving parts to stop, disconnect it from
the power supply and let it cool down.
2. Check, clean and store the tiller/cultivator as described below.
RULES FOR CARE
1. Keep the tiller/cultivator clean. Remove debris from it after each use
and before storage.
2. Regular and proper cleaning will help ensure safe use and prolong the
life of the tiller/cultivator.
3. Inspect the tiller/cultivator before each use for worn and damaged
parts. Do not operate it if you nd broken and worn parts.
GENERAL CLEANING
1. Clean the tiller/cultivator with a dry cloth. Use a brush for areas that
are hard to reach.
2. In particular clean the air vents after every use with a cloth and brush.
3. Remove stubborn dirt with high pressure air (max. 3 bar/40 psi).
NOTE: Do not use chemical, alkaline, abrasive or other
aggressive detergents or disinfectants to clean this tiller/
cultivator as they might be harmful to its surfaces. Do not use
cleaning fluids or solvents or spray the machine down with
water (especially water under pressure) when cleaning the tiller/
cultivator.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
4. Check for worn or damaged parts. Replace worn parts as necessary
or contact the Mantis customer service center at 1-800-366-6268 for
assistance before using the tiller/cultivator again.
UNDERSIDE AND TINES
1. Keep the underside and tines clean and free of debris. Remove soil
with a proper brush or tool.
2. All nuts and bolts must be checked periodically for tightness before
operation. After prolonged use, especially in sandy soil conditions, the
tines will become worn and loose some of the original shape. Tilling
efciency will be reduced and the tines should be replaced.
3. Have worn or damaged tines replaced with new ones of the same
type.
4. To prolong the life span of tines and the tiller/cultivator it is
recommended that the tines are lubricated after each use.
POWER CORD
If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied persons in order to avoid
a safety hazard.
Always switch the tiller/cultivator off, wait for
moving parts to stop, disconnect the tiller/
cultivator from the power supply and let the
tiller/cultivator cool down before performing
inspection, maintenance and cleaning work!
Only perform repairs and maintenance
work according to these instructions! All
further works must be performed by a
qualied specialist!
Wear protective gloves when working
on the tiller/cultivator or close to it! Use
proper tools to remove debris, e. g. a
wooden stick! Never use your bare hands!
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Moving parts will continue to run for several seconds
after turning off the machine. Wait until the tines have
completely stopped before lifting the tiller/cultivator or
conducting inspection and maintenance.
CAUTION!
13Contact us at www.mantis.com
Electric Tiller/Cultivator Maintenance
SPARE PARTS/REPLACEMENT PARTS
The following parts of this product may be replaced by the
consumer. Spare parts are available through Mantis customer
service.
Description Model Number
Tine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8440-990101-01
Lock Nut M8 x 8mm high . . . . . . . . . . . . . . . . . . . . . . . 8NH-08D
Hex Head Bolt M8 x 40mm long, 8.8 Grade. . . . . 8SFDD08-40D
REPAIR
This tiller/cultivator does not contain any parts that can be
repaired by the consumer. For assistance contact the Mantis
customer service center at 1-800-366-6268.
MAINTENANCE
Before and after each use, check the tiller/cultivator for wear and damage. If required, exchange worn or damaged parts for
new ones as described in this instruction manual. Observe the technical requirements.
1. Follow the maintenance and repair instructions for this tiller/cultivator. Never carry out any modications of this product.
Information about maintenance and repair is provided in this user manual.
2. Keep all nuts, bolts and screws tight to ensure the tiller/cultivator is in safe working condition.
3. Make sure that air vents are not covered with debris
4. Replace worn or damaged parts for safe operation.
5. Be sure that tines are clear and can rotate freely – Accumulation of debris around the tines could impair performance or
damage the motor. Inspect and clean the area around the tines before every use.
CHANGING THE TINES
NOTE: The tiller/cultivator is tted with four tilling tines that can
easily be changed in pairs. Always change both tine pairs at the
same time to avoid imbalance and damage to the machine.
To replace the tines, follow the steps below:
1. While standing on a at and stable surface, switch off the
unit, wait for moving parts to stop and remove the plug from
the extension cord.
2. Remove the 2 bolts and 2 nuts, then remove the steel tines
(Figure 5).
!
!
3. Clean the drive shaft
4. Place the new tines onto the drive shaft so that the holes on
the tine hub line up with the holes on the drive shaft.
5. Insert the 2 bolts through the holes and secure them with the
2 nuts (Figure 6).
!
!
IMPORTANT: The tines must be set in the correct turning
direction. Note the way the old tines came off and replace the
new ones exactly the same way.
Always use only original Mantis replacement parts. The use of any unauthorized replacement parts,
attachments or accessories can be dangerous and could cause injury or mechanical damage.
Figure 5
Figure 6
14 Operators Manual
Electric Tiller/Cultivator Maintenance & Storage
STORAGE
1. Switch the product off, wait for moving parts to stop and disconnect it
from the power supply.
2. Clean the tiller/cultivator as described above.
3. Store the tiller/cultivator in a sheltered, dry, frost-free, well-ventilated
place.
4.
When not in use, the tiller/cultivator should be stored indoors in a dry
and high or locked-up place out of the reach of children.
The ideal
storage temperature is between 50°F (10°C) and 86°F (30°C).
5. We recommend using the original package for storage or covering the
tiller/cultivator with a suitable tarp or enclosure to protect it against dust.
6. You can store your tiller/cultivator with the handles in an extended
position or folded down (Figure 7). Loosening handle knobs will allow the
handles to fold down as shown.
TRANSPORTATION
1. Switch the tiller/cultivator off, wait for moving parts to stop and
disconnect it from the power supply.
2. Attach transportation guards, if applicable.
3. Always carry the
tiller/cultivator by its transportation handle.
4. Protect the
tiller/cultivator from any heavy impact or strong vibrations
which may occur during transportation in vehicles.
5. Secure the
tiller/cultivator to prevent it from slipping or falling over.
VIBRATION AND NOISE REDUCTION
To reduce the impact of noise and vibration emission, limit the time
of operation, as well as wear personal protective equipment.
Take the following points into account to minimize the vibration and
noise exposure risks:
1. Only use the tiller/cultivator as intended by its design and these
instructions.
2. Ensure that the tiller/cultivator is in good condition and well
maintained.
3. Use correct tines and ensure they are in good condition.
4. Keep tight grip on the handle grips.
5. Maintain this tiller/cultivator in accordance with these instructions
and keep tiens well lubricated.
6. Plan your work schedule to spread product use across a longer
period of time.
RESIDUAL RISKS
Even if you are operating this tiller/cultivator in accordance
with all the safety requirements, potential risks of injury and
damage remain. The following dangers can arise in connection
with the use of this product:
1. Health defects resulting from vibration emission if the product is
being used over long periods of time or not properly managed
and maintained.
2. Injuries and damage to property due to broken components or
the sudden impact of hidden objects during use.
3. Danger of injury and property damage caused by thrown objects.
This tiller/cultivator produces an electromagnetic eld during operation! This eld may under some circumstances
interfere with active or passive medical implants! To reduce the risk of serious or fatal injury, we recommend persons
with medical implants to consult their doctor and the medical implant manufacturer before operating this product!
Figure 7
15Contact us at www.mantis.com
Electric Tiller/Cultivator Troubleshooting
RECYCLING AND DISPOSAL
The product comes in a package that protects it against damage during shipping. Keep the package until you are
sure that all parts have been delivered and the product functions properly. Recycle the package afterwards.
WEEE symbol. Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or local store for recycling advice.
Troubleshooting
Problem Cause Remedy
1. Tiller/cultivator does not start 1.1. Not connected to power supply
1.2. Power cord or plug is defective
1.3. Other electrical defect to the product
1.1. Connect to power supply
1.2. Check by a specialist electrician
1.3. Check by a specialist electrician
2.
Tiller/cultivator
does not reach
full power
2.1. Extension cord not suitable for
operation with this product
2.2. Power source (e.g. generator) has
too low voltage
2.3. Air vents are blocked
2.1. Use a proper extension cord
2.2. Connect to another power
source
2.3. Clean the air vents
3. Unsatisfactory result 3.1. Tines are dull/damaged
3.2. Tines not suitable for ground material
3.1. Replace with new tines
3.2. Use product only on suitable
ground
4. Excessive vibration or noise 4.1. Tines are dull/damaged
4.2. Bolts/nuts are loose
4.1. Replace with new tines
4.2. Tighten bolts/nuts
Suspected malfunctions are often due to causes that users can x themselves. Therefore check malfunctions using this section. In most cases
the problem can be solved quickly.
Only perform the steps described within these instructions! All further inspection, maintenance and repair work must be performed
by an authorized service center or a similarly qualied specialist if you cannot solve the problem yourself! For assistance contact the
Mantis customer service center at 1-800-366-6268.
9
WEEE symbol. Waste electrical products should not be
disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or local store
for recycling advice.
MANTIS extends this limited warranty against defects in material and workmanship for a period of two (2) years from the date
of purchase by the original purchaser.
MANTIS will repair or replace, at its option, any part or parts of the product found to be defective in material or workmanship
during the warranty period. Warranty repairs and replacements will be made without charge for parts or labor. All parts replaced
under warranty will be considered as part of the original product, and any warranty on the replaced parts will expire coincident
with the original product warranty. If you think your MANTIS TILLER/CULTIVATOR is defective in material or workmanship, please
contact our Customer Service Department at 1-800-366-6268 or via our Contact Us page on www.mantis.com
Mantis
1028 Street Road
Southampton, PA 18966
USA
You are responsible for pickup and delivery charges; the product must be returned to us postage paid.
MANTIS assumes no responsibility in the event that the product was not assembled or used in compliance with any assembly,
care, safety, or operating instructions contained in the Operator’s Manual or accompanying the product. This limited warranty
does not cover damages or defects due to normal wear and tear, lack of reasonable and proper maintenance, failure to follow
operating instructions or owner’s manual, misuse, lack of proper storage or accidents or routine maintenance parts and service.
This limited warranty shall not be effective if your MANTIS TILLER/CULTIVATOR has been subjected to negligence or has been
repaired or altered by anyone other than an authorized dealer or authorized service center.
You must maintain your MANTIS TILLER/CULTIVATOR by following the mantenence procedures described in the owner’s manual.
Such routine maintenance, whether performed by you or a dealer, is at your expense.
MANTIS MAKES NO EXPRESS OR IMPLIED WARRANTIES, REPRESENTATIONS OR PROMISES EXCEPT THOSE
CONTAINED HEREIN. THERE ARE NO OTHER WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. ALL WARRANTIES OTHER THAN THE EXPRESS WARRANTY SET FORTH ABOVE
ARE SPECIFICALLY DISCLAIMED. THE DURATION OF ANY IMPLIED WARRANTY, INCLUDING MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY. MANTIS
DISCLAIMS ALL LIABILITY FOR INDIRECT, INCIDENTAL AND/OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH
THE USE OF THE MANTIS PRODUCTS COVER BY THIS WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THAT ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM
STATES TO STATE.
©2017 Schiller Grounds Care, Inc. All Rights Reserved.
LIMITED WARRANTY
Specications, descriptions and illustrative material in this literature are as accurate as known at the time of publication, but are
subject to change without notice.
Motobêche-bineuse électrique
MAN 430199
Rév. C 4-10-18
Operators Manual and Safety Instructions for Electric Tiller/Cultivator
Original Operating Instructions
Manuel de l’utilisateur et consignes de sécurité pour la motobêche-bineuse électrique
Traduction des instructions originales
3550
2 Manuel de l’utilisateur
MESSAGE IMPORTANT
Merci d’avoir acheté cette motobêche-bineuse Mantis. Vous avez acheté un produit de classe
mondiale, de conception et de fabrication quasiment sans égales.
Ce manuel de l’utilisateur contient des instructions de sécurité. La durée utile et le bon emploi
de cette machine dépendent en grande partie de la manière dont vous avez lu et compris ce
manuel. Veillez à traiter la machine correctement, à la graisser et la régler comme indiqué et
elle vous offrira de nombreuses années de service able.
L’utilisation sans danger de ce produit Mantis est l’un de nos principaux objectifs de conception.
Nous intégrons de nombreux dispositifs de sécurité mais comptons aussi sur votre bon sens et
votre attention pour éviter les accidents. Pour assurer une protection optimale, lisez les manuels
avec attention. Apprenez à utiliser correctement toutes les commandes. Observez toutes les mesures de sécurité. Respectez toutes les instructions et mises
en garde. Ne démontez ou ne désactivez aucun des dispositifs de sécurité. Assurez-vous que tous les utilisateurs de la machine sont aussi bien informés et
prudents dans son emploi que vous.
Mantis conçoit et construit son matériel pour offrir de nombreuses années de service sûr et productif. Pour optimiser la durée de service, utilisez impérativement
cette machine conformément aux instructions des manuels, maintenez-la en bon état et respectez toutes les mises en garde et consignes de sécurité. Vous
ne le regretterez jamais.
RÈGLES DE SÉCURITÉ ET AVERTISSEMENTS
Informations spéciales sur la sécurité ..........................................3
Sécurité et avertissements ...........................................................3
Identication des autocollants de sécurité ................................3-4
Sécurité - À faire / À ne pas faire .................................................5
ASSEMBLAGE
Pièces ..........................................................................................6
Caractéristiques techniques .........................................................7
Avant utilisation ............................................................................ 8
Assemblage ..............................................................................8-9
Raccordement à l’alimentation électrique .................................... 9
FONCTIONNEMENT
Emploi prévu ..............................................................................10
Réglage des roues ..................................................................... 10
Mise en marche et à l’arrêt.........................................................10
Fonctionnement général ............................................................ 11
Binage ........................................................................................ 11
ENTRETIEN ET ENTREPOSAGE .............................................12-14
CHANGER LES FRAISES ..............................................................13
ENTREPOSAGE .............................................................................14
TRANSPORT ..................................................................................14
DÉPANNAGE ..................................................................................15
RECYCLAGE ET ÉLIMINATION ..................................................... 15
GARANTIE LIMITÉE ................................. COUVERTURE ARRIÈRE
TABLE DES MATIÈRES
Bienvenue dans le monde du jardinage Mantis
Schiller Grounds Care, Inc.
1028 Street Road
Southampton, PA 18966-4217 États-Unis
TÉLÉPHONE (800) 366-6268 • TÉLÉCOPIEUR
(215) 956-3855
Ce manuel fait partie intégrante de la machine. Les fournisseurs de machines neuves
et d’occasion doivent s’assurer que ce manuel est remis avec la machine. CES
INSTRUCTIONS VISENT À LA SÉCURITÉ DES UTILISATEURS. VEILLER À LES
LIRE AVEC ATTENTION AVANT UTILISATION ET À LES CONSERVER POUR TOUTE
RÉFÉRENCE ULTÉRIEURE.
ENREGISTREMENT DU
PRODUIT
CE PRODUIT MANTIS PEUT ÊTRE
ENREGISTRÉ EN LIGNE À :
SCHILLERGC.COM/REGISTER
3Contactez-nous sur www.mantis.fr/nous-contacter/
Le présent manuel de l’utilisateur contient un certain nombre de règles de sécurité et d’avis importants. Pour la protection de tous, veiller à bien
comprendre et respecter ces mises en garde et toutes les instructions.
I. INFORMATIONS SPÉCIALES SUR LA SÉCURITÉ
II. SÉCURITÉ ET AVERTISSEMENTS
III. IDENTIFICATION DES AUTOCOLLANTS DE SÉCURITÉ
Les symboles et abréviations suivants sont visibles sur le produit, sur l’étiquette signalétique et dans ce manuel. Veiller à se familiariser avec
eux an réduire les risques de blessures corporelles et de dégâts matériels.
Règles de sécurité et avertissements
Pour réduire les risques d’accident, respecter les
consignes de sécurité gurant dans ce manuel.
Le non-respect de ces consignes peut entraîner des
dommages corporels et matériels graves.
Attention : Ce symbole attire l’attention sur
d’importantes consignes de sécurité. Lorsque
ce symbole est présent, respecter la mise
en garde ! Rester vigilant !
Pour écarter les risques de blessure grave, utiliser et entretenir cette
motobêche de façon appropriée et porter une protection adaptée. Lire
et comprendre les consignes de sécurité et toutes les instructions de
ce manuel. Porter la protection auditive et oculaire, des chaussures
antidérapantes adaptées, un couvre-chef pour contenir des cheveux
longs et des gants de protection.
Avertissement Proposition 65 de CALIFORNIE
Les cosses de batterie, bornes, gaines de ls et
accessoires associés contiennent du plomb et des
composés de plomb déclarés par l’État de la Californie
responsables de cancer, malformations congénitales et
autres anomalies de la reproduction.
SE LAVER LES MAINS APRÈS MANIPULATION
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Verrouiller / pour serrer ou attacher.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Déverrouiller / pour desserrer.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Note / Remarque.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Attention / Avertissement.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Lire le manuel d’instructions.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Porter une protection auditive.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Porter des lunettes de protection.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Porter un masque antipoussière.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Porter des gants de protection.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Porter des chaussures de protection
antidérapantes.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Porter des vêtements de protection serrés.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Débrancher immédiatement la che de la prise
électrique si le cordon est endommagé ou
coupé.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Ne pas exposer la motobêche-bineuse à la
pluie ou à l’humidité.
7
Symbols
On the product, the rating label and within these instructions you will find among
others the following symbols and abbreviations. Familiarise yourself with them to
reduce hazards like personal injuries and damage to property.
Lock / to tighten or secure.
Unlock / to loosen.
Note / Remark.
Caution / Warning.
Read the instruction manual.
Wear hearing protection.
Wear eye protection.
Wear a dust mask.
Wear protective gloves.
Wear protective, slip-resistant footwear.
Wear tight-fitted protective clothes.
Remove plug from the mains immediately if the cable is
damaged or cut.
Do not expose the product to rain or wet conditions (moisture).
Work across the slopes, never up and down.
Travailler perpendiculairement à la pente,
jamais en montée ou en descente.
AVERTISSEMENT
AVERTISSEMENT
AVERTISSEMENT
AVERTISSEMENT
4 Manuel de l’utilisateur
Pour écarter les risques blessures graves à
soi-même et aux autres et de dégâts matériels,
veiller à utiliser la motobêche-bineuse de
façon correcte et à respecter les consignes de
sécurité. Lire et comprendre ce manuel avant de
tenter d’utiliser la motobêche.
Les pièces en mouvement continuent de tourner
pendant plusieurs secondes après la mise à l’arrêt de
la motobêche-bineuse. Attendre que les fraises soient à
l’arrêt complet avant de soulever la motobêche-bineuse
ou de procéder à son contrôle et son entretien.
Certaines poussières et débris produits par l’utilisation de l’outil peuvent contenir
des substances chimiques déclarées par l’État de la Californie responsables de
cancer, malformations congénitales ou autres anomalies de la reproduction. Il peut
notamment s’agir des substances chimiques suivantes :
• Composés chimiques dans les engrais
• Composés dans les insecticides, herbicides et pesticides
Arsenic et chrome provenant de bois d’œuvre traité
Le risque associé à l’exposition à ces produits varie et dépend de la fréquence
de ce type de travail. Pour réduire l’exposition, veiller à travailler dans un endroit
bien aéré et avec un équipement de sécurité homologué, notamment un masque à
poussière spécialement conçu pour ltrer les particules microscopiques.
IV. AVERTISSEMENTS :
1. Ne jamais permettre aux enfants ni aux
personnes n’ayant pas pris connaissance de
ces instructions d’utiliser la motobêche-bineuse.
La réglementation locale peut imposer des
restrictions relatives à l’âge de l’utilisateur.
2. Tenir les enfants, les autres personnes et
les animaux à l’écart – Toutes les personnes
présentes, ainsi que les animaux doivent se tenir
à une distance sûre de la zone de travail.
3. Garder à l’esprit que l’utilisateur est responsable
des accidents ou des dangers qu’il fait courir aux
personnes ou à aux biens.
4. Porter une tenue adaptée – Toujours porter
des chaussures antidérapantes adaptées et un
pantalon long durant l’utilisation. Ne pas utiliser le
produit pieds nus ou avec des sandales ouvertes.
Ne pas de bijoux ou de vêtements amples car ces
articles peuvent être happés par les pièces en
mouvement. Porter un couvre-chef pour contenir
des cheveux longs. Le port de gants de protection
est recommandé pour travailler à l’extérieur.
Utiliser des lunettes de sécurité et une protection
auditive.
5. Contrôler avec soin la zone où la motobêche-
bineuse doit être utilisée et enlever tous les objets
susceptibles d’être projetés par la machine. Les
objets projetés peuvent provoquer des blessures
corporelles et dégâts matériels graves. Ne laisser
personne se tenir devant une motobêche-bineuse
en marche.
III. IDENTIFICATION DES AUTOCOLLANTS DE SÉCURITÉ (SUITE)
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Contrôler la zone où la motobêche-bineuse doit
être utilisée et enlever tous les objets susceptibles
d’être projetés par la machine. Si des objets sont
dissimulés durant l’utilisation, arrêter le moteur,
attendre l’arrêt complet des pièces en mouvement
et enlever l’objet.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Les objets projetés par la motobêche-bineuse
peuvent heurter l’utilisateur ou d’autres personnes
présentes. Toujours maintenir les autres personnes
et animaux à une distance sûre de la motobêche-
bineuse lorsqu’elle est en marche. En règle
générale, les enfants ne devront pas s’approcher de
l’endroit où la machine est utilisée ou entreposée.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Tenir le cordon de rallonge (non fourni) à l’écart de
l’outil de coupe.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Les fraises continuent de tourner après la mise à
l’arrêt de la motobêche-bineuse. Attendre l’arrêt
complet de toutes les parties de la machine avant
de toucher la motobêche-bineuse.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Faire preuve d’attention particulière en travaillant
sur l’outil de coupe !
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Débrancher immédiatement la che de la prise
électrique si le cordon est endommagé ou coupé.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Tenir les mains et les pieds à l’écart des pièces
rotatives tranchantes ; danger de blessure ! Lors
du nettoyage, des réparations et des contrôles,
s’assurer que l’outil de coupe et toutes les pièces
mobiles sont à l’arrêt complet.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Ce produit est de classe de protection II. Cela
signie qu’il est équipé d’une isolation double ou
renforcée.
9
WEEE symbol. Waste electrical products should not be
disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or local store
for recycling advice.
Symbole WEEE. Les appareils électriques en n
de vie ne doivent pas être jetés avec les déchets
ménagers. Veiller à les recycler là où ce service
existe. Obtenir des conseils en matière de recyclage
auprès des autorités locales ou du revendeur local.
Lire les instructions avec attention. Veiller à se familiariser avec les commandes et la bonne utilisation du produit.
ATTENTION!
AVERTISSEMENT
AVERTISSEMENT
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Mantis Electric Tiller Cultivator Manuel utilisateur

Catégorie
Mini motoculteurs
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues