EGO SNT2405 Manuel utilisateur

Marque: EGO

Modèle: SNT2405

Catégorie: Souffleuses à neige

Taper: Manuel utilisateur

OPERATOR'S MANUAL

56-VOLT LITHIUM-ION

CORDLESS

SNOW BLOWER

MODEL NUMBER SNT2400/SNT2400-FC

WARNING: To reduce the risk of injury, the user must read and understand the

Operator’s Manual before using this product. Save these instructions for future reference.

16-0617_EGO_SNT2100 _Snow Blower_Manual_NA_V7

Español p. 79

Français p. 39

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC2

TABLE OF CONTENTS

Safety Symbols ..........................................4

Safety Instructions ......................................5-6

Safe Operation Practices for Walk-behind Snow Blower .........6-9

Introduction ............................................10

Specications ..........................................10

Description .........................................11-13

Assembly ...........................................14-15

Operation ...........................................16-27

Maintenance ........................................28-33

Troubleshooting ......................................34-35

Warranty ...........................................36-37

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC 3

READ ALL INSTRUCTIONS!

READ & UNDERSTAND

OPERATOR'S MANUAL

WARNING:

Some dust created by power sanding, sawing, grinding, drilling

and other construction activities contains chemicals known to the state of California

to cause cancer, birth defects or other reproductive harm. Some examples of these

chemicals are:

◾

Lead from lead-based paints

◾

Crystalline silica from bricks and cement and other masonry products, and

◾

Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of

work. To reduce your exposure to these chemicals: work in a well ventilated area, and

work with approved safety equipment, such as those dust masks that are specially

designed to lter out microscopic particles.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC4

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The

safety symbols and the explanations with them deserve your careful attention and

understanding. The symbol warnings do not, by themselves, eliminate any danger.

The instructions and warnings they give are no substitutes for proper accident

prevention measures.

WARNING:

Be sure to read and understand all safety instructions in this

Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,”

and “CAUTION” before using this tool. Failure to follow all instructions listed below may

result in electric shock, re, and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL:

Indicates DANGER, WARNING, or CAUTION.

May be used in conjunction with other symbols or pictographs.

WARNING:

The operation of any power tools can result in

foreign objects being thrown into your eyes, which can result in severe

eye damage. Before beginning power tool operation, always wear

safety goggles or safety glasses with side shields and a full face shield

when needed. We recommend a Wide Vision Safety Mask for use over

eyeglasses or standard safety glasses with side shields. Always use

eye protection which is marked to comply with ANSI Z87.1.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC 5

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may appear on this product.

Read, understand, and follow all instructions on the machine before attempting to

assemble and operate.

Safety Alert Indicates a potential personal injury hazard.

Eye Protection

Always wear safety goggles or safety glasses

with side shields and a full face shield when

operating this product.

Read Operator’s

Manual

To reduce the risk of injury, user must read

and understand operator’s manual before

using this product.

DANGER —

Keep Hands

Away from the

Impeller

Do not use hands to unclog the chute.

Keep Feet Out of

Impeller

Keep feet away from rotating impeller

KEEP HANDS AND FEET AWAY

GARDER MAINS ET PIEDS À DISTANCE

MANTENGA LAS MANOS Y LOS PIES ALEJADOS

DANGER — Keep

Hands and Feet

Away

To reduce the risk of injury, keep hands and

feet away from rotating parts. Do not operate

unless discharge chute is in its proper place.

If damaged, replace immediately.

Recycle Symbols

This product uses Lithium-ion (Li-ion)

batteries. Local, state, or federal laws may

prohibit disposal of batteries in ordinary

trash. Consult your local waste authority for

information regarding available recycling and/

or disposal options.

IPX4

Ingress Protection

Degree

Protection from splashing water

V Volt Voltage

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC6

Direct Current Type or a characteristic of current

cm centimeter Length or size

in. Inch Length or size

Ft. Feet Length or size

kg Kilogram Weight

lb Pound Weight

WARNING:

To ensure safety and reliability, all repairs should be performed by a

qualied service technician.

SAFE OPERATION PRACTICES FOR WALK-BEHIND

SNOW BLOWER

DANGER:

This snow blower is capable of amputating hands and feet and

throwing objects. Failure to observe the following safety instructions could result in

serious injury.

FOR ALL SNOW BLOWERS

◾

Do not use on graveled surface unless the snow blower is adjusted for such a

surface in accordance with the operator’s manual.

◾

Keep Children Away – All visitors should be kept a safe distance from work area.

◾

Dress Properly – Do not wear loose clothing or jewelry. They can be caught in

moving parts.

◾

Wear rubber boots when operating the snow blower.

◾

Keep hands away from moving parts.

◾

Keep guards in place and in working order.

◾

Don’t Force Snow Blower – It will perform better and safer at the rate for which it

was designed.

◾

Don’t Overreach – Keep proper footing and balance at all times.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC 7

◾

If the snow blower strikes a foreign object follow these steps:

1) Stop snow blower. Release the switch.

2) Remove the battery pack(s).

3) Inspect for damage.

4) Repair any damage before restarting and operating the snow blower.

◾

Store Idle Snow Blowers Indoors-When not in use, snow blowers should be stored

indoors in dry, locked-up place – out of reach of children.

◾

Maintain Snow Blowers with Care – Following instructions for lubricating and

changing accessories.

TRAINING

◾

Read, understand and follow all instructions on the machine and in the

manual(s) before operating this unit. Be thoroughly familiar with the controls and

the proper use of the equipment. Know how to stop the unit and disengage the

controls quickly.

◾

Never allow children to operate the equipment. Never allow adults to operate the

equipment without proper instruction.

◾

Keep the area of operation clear of all persons, particularly small children.

◾

Exercise caution to avoid slipping or falling, especially when operating the snow

blower in reverse.

PREPARATION

◾

Thoroughly inspect the area where the equipment is to be used and remove all

doormats, sleds, boards, wires, and other foreign objects.

◾

Do not operate the equipment without wearing adequate winter garments. Avoid

loose-tting clothing that can get caught in moving parts. Wear footwear that will

improve footing on slippery surfaces.

◾

Never attempt to make any adjustments while the motor is running (except when

specically recommended by manufacturer).

◾

Always wear safety glasses or eye shields during operation or while performing

an adjustment or repair to protect eyes from foreign objects that may be thrown

from the machine.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC8

OPERATION

◾

Prevent unintentional starting. Ensure the switch is in the off-position before

connecting to battery pack, picking up or carrying the appliance. Carrying the

appliance with your nger on the switch or energizing appliance that have the

switch on invites accidents.

◾

Do not put hands or feet near or under rotating parts. Keep clear of the discharger

opening at all times.

◾

Exercise extreme caution when operating on or crossing gravel drives, walks, or

roads. Stay alert for hidden hazards or trafc.

◾

After striking a foreign object, stop the motor, remove the battery pack(s),

thoroughly inspect the snow blower for any damage, and repair the damage

before restarting and operating the snow blower.

◾

If the unit should start to vibrate abnormally, stop the motor and check

immediately for the cause. Vibration is generally a warning of trouble.

◾

Stop the motor whenever you leave the operating position, before unclogging

the auger assembly housing or discharge chute, and when making any repairs,

adjustments or inspections.

◾

When clearing, repairing or inspecting the snow blower, stop the motor and make

certain the auger assembly and all moving parts have stopped. Remove the

battery pack(s) to prevent someone from accidentally starting the motor.

◾

Exercise extreme caution when operating on slopes.

◾

Never operate the snow blower without proper guards and other safety protective

devices in place and working.

◾

Never direct the discharge toward people or areas where property damage can

occur. Keep children and others away.

◾

Do not overload the machine capacity by attempting to clear snow at too fast a

rate.

◾

Disengage power to the auger assembly when snow blower is transported or not

in use.

◾

Use only attachments and accessories approved by the manufacturer of the snow

blower (such as scraper bar).

◾

Never operate the snow blower without good visibility or light. Always be sure of

your footing, and keep a rm hold on the handles. Walk; never run.

◾

Do not expose a battery pack or tool to re or excessive temperature. Exposure to

re or temperature above 212 °F (100°C) may cause explosion.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC 9

◾

Use only with the battery packs and chargers listed below:

BATTERY PACK CHARGER

BA1400, BA1400-FC, BA2800, BA2800-FC,

BA4200, BA4200-FC, BA1400T, BA1400T-FC,

BA2800T, BA2800T-FC, BA4200T, BA4200T-FC,

BA5600T, BA5600T-FC

CH2100, CH2100-FC,

CH5500, CH5500-FC,

CH2800D, CH2800D-FC

NOTICE: For best performance, recommend for use with 2pcs 5.0Ah or higher Ah batteries.

CLEARING A CLOGGING CHUTE

Hand contact with the rotating auger assembly inside the discharge chute is the most

common cause of injury associated with snow blowers. Never use your hand to clean

out the discharge chute.

To clear the chute:

◾

SHUT THE MOTOR OFF!

◾

Remove the battery pack(s) from the snow blower.

◾

Wait 10 seconds to be sure the auger has stopping rotating.

◾

Always use the chute clean tool which is attached to the machine as an

accessory, do not use your hand

MAINTENANCE AND STORAGE

◾

Check all bolts or fasteners at frequent intervals for proper tightness to be sure

the equipment is in safe working condition.

◾

Always refer to operator’s manual for important details if the snow blower is to be

stored for an extended period.

◾

Maintain or replace safety and instruction labels, as necessary.

◾

Run the machine a few minutes after blowing snow to prevent freeze-up of the

auger assembly.

SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others

who may use this tool. If you lend this tool to someone else, also lend these instructions

to them to prevent misuse of the product and possibly injury.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC10

INTRODUCTION

Congratulations on your selection of a new generation of 56V Lithium-Ion powered

snow blower. It has been designed, engineered and manufactured to give you the best

possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact EGO

customer service center 1-855-EGO-5656.

This manual contains important information on to the safe assembly, operation and

maintenance of your snow blower. Read it carefully before using the tool. Keep this

manual handy so you can refer to it at any time.

SERIAL NUMBER _____________________ DATE OF PURCHASE _________________

THE MODEL AND SERIAL NUMBERS WILL BE FOUND ON A LABEL ATTACHED ON AUGER

ASSEMBLY HOUSING.

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE

PLACE FOR FUTURE REFERENCE. SAVE YOUR SALES RECEIPT.

SPECIFICATIONS

Voltage 56V

Clearing Width 24 in

Intake Height 20 in

Throwing Distance Up to 50 ft.

Wheel Size 15 in

Operating Temperature -4°F-50°F(-20°C-10°C)

Storage Temperature -4°F-158°F(-20°C-70°C)

Snow Blower Weight (Without battery pack) 143.3 lbs (65 kg)

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC 11

DESCRIPTION

Battery Cover

Rear Handle

Side Rail

Main Handle

LED Light Button

Self-Propel Trigger

Safety Button

Auger-Speed-Control Lever

Self-Propel Speed-Control Lever

LED Sidelights

LED Indicator

Chute-Rotation Handle

Chute-Deector Handle

Auger-Switch Trigger

Chute Deector

Snow-Discharge Chute

Chute Clean Tool

Deck

LED Headlights

Skid Shoe

Battery

Compartment

Wheel

Scraper BarAuger

Electric Contacts

Battery-Release Button

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC12

WARNING:

The safe use of this product requires an understanding of the

information on the tool and in this operator’s manual, as well as knowledge of the project

you are attempting. Before use of this product, familiarize yourself with all operating

features and safety rules.

Safety Button

The safety button must be pressed down before the motor can be started.

WARNING:

The safety button is safety device. Never attempt to bypass its

operation.

Auger-Switch Trigger

Engages and disengages the motor. It can be working after pressing the safety button.

Auger-Speed-Control Lever

Adjusts the auger speed in order to adjust the throwing distance.

Self-Propel Trigger

Turns the self-propel function ON and OFF.

Self-Propel Speed-Control Lever

Increases or decrease the self-propel speed.

Chute-Rotation Handle

Rotates the chute so that the user may direct the discharged snow as desired. The

handle allows the chute to rotate from left 100° to right 100°.

Chute-Deector Handle

Adjusts the angle of the chute deector and the height of the discharge stream.

LED Headlights/Sidelights

This feature provides extra light for increased visibility.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC 13

LED Light Button

Turns on/off the LED headlights and sidelights.

LED Indicator

Indicates the status of the snow blower and battery pack.

Scraper Bar

Removes the last bit of snow from the surface you are clearing.

Skid Shoe

Increases the ability to maneuver the snowblower on the snow and adjusts the distance

between snow scraper and ground.

Battery-Release Button

Press to release the battery quickly.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC14

ASSEMBLY

WARNING:

To prevent accidental starting that could cause serious personal

injury, always remove the battery pack(s) from the tool when assembling parts.

WARNING:

If any parts are damaged or missing, do not operate this product

until the parts are replaced. Use of this product with damaged or missing parts could

result in serious personal injury.

WARNING:

Do not attempt to modify this tool or create accessories not

recommended for use with this product. Any such alteration or modication is misuse

and could result in a hazardous condition leading to serious injury.

UNPACKING

◾

Use two people to grasp the rear handle and the front part of the product at the

same time and carefully lift the tool up and out of the carton. Remove any other

accessories from the carton. Make sure that all items listed in the packing list are

included.

CAUTION:

Heavy object. Team lift required. At least two persons are

required to be lift this snow blower out of the package.

WARNING:

Do not use this product if any parts on the packing list are already

assembled to your product when you unpack it. Parts on this list are not assembled to

the product by the manufacturer and require customer installation. Use of a product

that may have been improperly assembled could result in serious personal injury.

◾

Inspect the product carefully to make sure that no breakage or damage occurred

during shipping.

◾

Do not discard the packing material until you have carefully inspected and

satisfactorily operated the tool.

◾

If any parts are damaged or missing, please return the product to the place of

purchase.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC 15

LIST OF CONTENTS

PART NAME QUANTITY

Snow Blower 1

Snow-Discharge Chute Assembly 1

Handle Assembly 1

Operator’s Manual 1

Chute Clean Tool 1

Shear Pin 2

TO INSTALL THE HANDLE

ASSEMBLY

NOTICE:

The handle assembly requires

assembly before operating the snow

blower (Fig.2).

1. Loosen the four locking knobs and

remove the four bolts from the rear

handle (Fig.3).

2. Lift the handle assembly, align

the holes in the side rails with the

holes in the rear handle, select

the preferred handle height, then

secure the handle assembly with

the bolts and locking knobs (Fig.4).

Please see section “HANDLE

HEIGHT ADJUSTMENT” for detailed

adjustment instructions.

Handle Assmbly

Locking Knob

Bolt

Rear Handle

Locking Knob

Side Rail

Rear Handle

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC16

TO INSTALL THE SNOW-

DISCHARGE CHUTE ASSEMBLY

WARNING:

Never operate the

snow blower without the complete

discharge chute in place.

1. Loosen the knob on the inner

support pole and remove the bolt

(Fig.5). Save the knob and bolt for

reassembly.

2. Lift the snow-discharge chute

assembly, align the outer support

pole with the inner support pole,

and then slide the outer support

pole into place (Fig. 5). Make sure

that the snow-discharge chute is

correctly seated on the base (Fig.6).

3. Secure the snow discharge chute assembly with the reserved knob and bolt.

WARNING:

Use the chute rotation handle to make sure that the chute rotates

properly and that the discharge opening never crosses the operator controls.

Snow-discharge

Chute

Base

Outer Support Pole

Knob

Base

Bolt

Inner Support Pole

Snow-discharge

Chute

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC 17

OPERATION

WARNING:

Do not allow familiarity with this product to make you careless.

Remember that a careless fraction of a second is sufcient to inict serious injury.

WARNING:

Always wear eye protection with side shields marked to comply with

ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes and

other possible serious injuries.

WARNING:

Do not use any attachments or accessories not recommended by the

manufacturer of this product. The use of attachments or accessories not recommended

can result in serious personal injury.

APPLICATION

You may use this product for purpose listed below:

Removing snow from areas such as driveways and sidewalks.

HANDLE-HEIGHT ADJUSTMENT

The handle assembly can be set to three

different heights. Choose a comfortable

operating position according to your

height.

1. Loosen the two upper locking knobs

and pull out the two bolts (Fig.7).

Save them for reassembly.

2. Loosen the two lower locking knobs. It is not necessary to remove the two lower

locking knobs and bolts from the side rails during handle height adjustment.

3. Raise or lower the handle and select the appropriate height relative to the

positions of the holes in the rear handle.

4. Once arriving at the appropriate holes, tighten the handle with the reserved knobs

and bolts; then tighten the two lower locking knobs to secure the rear handle.

Upper

Locking Knob

Lower

Locking Knob

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC18

The illustration shows the upper operating

position (Fig.8), the middle operating

position (Fig.9) and the lower operating

position (Fig.10).

TO ATTACH/DETACH THE

BATTERY PACK

CHARGE BEFORE FIRST USE.

NOTE: For best performance, we

recommend use with two 5.0 Ah EGO 56V

Arc-Lithium batteries or with two EGO 56V

Arc-Lithium batteries of greater capacity.

When not in use, 56V battery packs

should be stored in an enclosed area

where the temperature will not drop

below -4°F (-20°C). Optimal charging

temperatures are between 41°F (5°C) and

104°F (40°C).

WARNING:

If any parts are broken

or missing, do not attempt to attach the

battery packs to the snow blower or

operate the snow blower until the broken

or missing parts are replaced. Failure to

do so could result in serious injury.

1. The battery cover is hinged. Raise the battery cover by lifting the front of the

cover.

2. The snow blower is equipped with two battery compartments, which

accommodate two battery packs at the same time.

Upper

Operating

Position

Middle

Operating

Position

Lower

Operating

Position

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC 19

3. Align the grooves in the battery

pack with the raised ribs in one

of the battery compartments, and

then insert the battery pack into the

compartment (Fig.11).

4. Push the battery pack until you hear

a “click”. The battery-release button

will spring up when the battery pack

is securely attached.

5. Attach the other battery pack into

the other battery compartment in the

same way.

6. To detach the battery pack, depress

the battery-release button to release

the battery pack, and then lift it out of

the compartment (Fig. 12).

7. Close the battery cover.

NOTICE: Make sure that the latch on the snow blower snaps into place and that the

battery pack(s) are secured to the unit before starting operation.

STARTING/STOPPING THE SNOW BLOWER

CAUTION:

Do not attempt to override the operation of the safety button. Do not

rapidly turn the snow blower off and on.

WARNING:

The operation of a snow blower can result in foreign objects being

thrown into your or others’ eyes, which can damage eyes severely. Always wear safety

glasses while operating the snow blower or while performing any adjustments or repairs

on the snow blower.

WARNING:

Ensure that other people and pets remain at least 100’ (30m) away from

the snow blower when it is in use.

WARNING:

The auger will continue to rotate for a few seconds after the snow

blower is turned off. Allow the auger to stop rotating before starting it again.

Install

Battery

Remove

Battery

Battery-

Release

Button

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC20

To Start the Snow Blower

1. Ensure that the handle assembly is securely adjusted to appropriate height, the

side-discharge chute assembly is mounted properly, and the chute and chute

deector are adjusted to an appropriate position.

2. Attach the battery pack(s) to the snow blower and close the battery cover.

NOTICE: Make sure that the latch on the snow blower snaps into place and that the

battery pack(s) are secured to the snow blower before operation.

3. Press the safety button and hold for

1 second, and the LED indicator will

blink green. Press the auger-switch

trigger to turn on the snow blower

while the LED indicator blinks

(Fig.13).

NOTICE: The snow blower can be

turned on by the auger-switch-trigger only

when the LED indicator blinks.

NOTICE: The snow blower may not properly start if its battery temperature is -4°F

(-20°C) or less. If the snow blower doesn’t start, remove the battery from the snow

blower and allow it to warm indoors for 10 minutes or longer. Reinstall the battery and

try again.

To Stop the Snow Blower

1. Fully release the auger-switch trigger.

2. The electric brake in the Automatic Braking Mechanism will stop the auger

rotation within 3 seconds of the auger-switch release.

Variable-Auger-Speed System (Fig. 13)

The speed of the auger can be adjusted to control the throwing distance.

1. To increase the speed, push the auger-speed-control lever forwards.

2. To decrease the speed, pull the auger-speed-control lever backwards.

Auger-Switch Trigger

Auger-Speed-Control Lever

Safety Button

La page charge ...

EGO SNT2405 Manuel utilisateur

Marque: EGO

Modèle: SNT2405

Catégorie: Souffleuses à neige

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: EGO SNT2405 User manual
español: EGO SNT2405 Manual de usuario

EGO SNT2405 Manuel utilisateur

EGO SNT2405 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents