AFG Mycook 1.8 Manuel utilisateur

Taper
Manuel utilisateur
2
- The appliance’s plug must fit into the
mains socket properly. Do not alter the
plug. Do not use plug adaptors.
- Do not use or store the appliance
outdoors.
- If any of the appliances’s casing breaks,
immediately disconnect the appliance
from the mains to prevent the possibility
of an electric shock.
- Do not use the appliance if it has fallen
on the floor, if there are visible signs of
damage or if it has a leak.
- Do not force the electrical wire. Never
use the electric wire to lift up, carry or
unplug the appliance.
-Do not allow the connection cable to
come into contact with the appliance’s
hot surfaces.
- Remove and have available the required
length of cable for working with the
appliance, preventing accident risk
situations.
- Do not touch the plug with wet hands.
Personal safety
- Take the necessary measures to avoid
starting the appliance involuntarily.
- Do not touch any of the appliance’s
moving parts while it is operating.
- Do not touch metal parts or the body
when it is operating, as it may cause
serious burns.
Use and care
- Do not use the appliance if the
accessories or consumables attached to
it are defective.
Replace them immediately.
- Do not use the appliance if the parts or
accessories are not properly fitted.
- Do not use the appliance while the
goblet is empty.
- Do not use the appliance if the on/off
English
Cooking blender
Mycook 1.8
Safety advice and cautions
- Read these instructions carefully before
switching on the appliance and keep them
for future reference. Failure to follow and
observe these instructions could lead to
an accident.
- Clean all the parts of the product that
will be in contact with food, as indicated
in the cleaning section, before use.
Use or working environment:
-This appliance heats by induction. Do
not leave metallic objects on the working
surface, such as knives, forks, spoons or
lids, as they could become hot.
- Keep children and bystanders away
when using this appliance.
- Position the appliance on a flat, stable
surface, which can withstand high
temperatures, away from other sources of
heat and the splashing of water.
Electrical safety
- Do not use the appliance if the cable or
plug is damaged.
- Ensure that the voltage indicated on the
nameplate matches the mains voltage
before plugging in the appliance.
- Connect the appliance to a base with
an earthed socket rated at 16 amps.
3
Image 1
Image 2
switch does not work.
- Do not move the appliance while in
use.
- Do not force the appliance’s work
capacity.
- Respect the MAXIMUM and MINIMUM
levels.
- After its use, disconnect the appliance;
do not trust the container’s detector
- Unplug the appliance from the mains
when not in use and before undertaking
any cleaning task.
- This appliance is for household use
only, not professional or industrial use.
- This appliance is intended for adult use.
Ensure that this product is not used by
the disabled, children or people unused
to its handling.
- This appliance should be stored out of
reach of children and/or the disabled.
- This appliance is not a toy. Children
should be supervised to ensure that they
do not play with the appliance.
- Do not put the appliance away if it is
still hot.
- Make sure that the fan grill on the
appliance is not blocked by dust, dirt or
other foreign objects.
- Keep the appliance in good condition.
Check that the moving parts are not
misaligned or jammed and make sure
there are no broken parts or anomalies
that may prevent the appliance from
operating correctly.
- Keep the base of the pitcher and the
pitcher’s temperature sensor clean so
that it operates correctly
(Images 1 and 2).
- Make periodical checks of the condition
of the lid joint.
- Check that the lid is closed properly
before starting the appliance.
- Do not remove the lid while the liquid
in the container is boiling.
- Never leave the appliance unattended
while in use.
- Pay special attention when assembling
and removing the accessories, as the
blades are sharp. Be careful and avoid
direct contact with the blades’ cutting
edges.
- Any misuse or failure to follow the
instructions for use renders the guarantee
and the manufacturer’s liability null and
void.
4
Description, accessories and
documentation
(Images 3 and 4)
Accessories
A Central unit.
B Measuring cup.
C Pitcher lid.
D Joint with the lid.
E Pitcher.
F Blades.
G Blades attachment.
H Pitcher attachment support with
attachment clamp.
I Blending blades.
J Spatula with removable handle.
Documentation
- Cooking techniques guide.
- Instruction manual.
- Guarantee.
Image 3
Image 5
Image 6
Image 4
To save space, the appliance is packed
with the pitcher placed in a non-operating
position.
To take the pitcher out of the central unit:
Take it by the handle, turn it clockwise to
the limit and lift up.
(Picture 5).
Accessory description
Measuring cup (Image 6)
The measuring cup is used to:
1. To measure the amount of the different
ingredients. It is marked with a measuring
scale. Its maximum capacity is 100ml.
2. To avoid splashing.
3. To avoid heat loss during cooking.
(Image 7)
5
Liquids can be added to the pitcher when
the measuring cup is positioned onto the
lid
Pitcher lid (Image 8)
Important. Never use the lid with the
correct join attached.
(Images 9 and 10)
Image 9
Image 10
Image 7
Image 8
The lid is for closing the pitcher and
activating the safety sensors.
There is a groove at the front, which fits
together with the pouring spout, and a
perforated tab at the back, which fits
together with the groove on the handle.
It also has a hole in the central part
through which the food is added;
introduce the spatula to stir it and attach
the measuring glass.
It incorporates a silicon seal, which
prevents liquids from seeping out between
the pitcher and the lid.
To set up the silicon join, ensure that the
thick side of the join is in contact with
the lid.
Lid
This thick side of the join should be
fitted in contact with the lid.
IMPORTANT: NEVER OPEN THE
PITCHER LID WHEN THE APPLIANCE
IS OPERATING, AS THERE IS A RISK
OF OVERFLOWING AND/OR BURNS.
BEFORE OPENING THE LID OF THE
PITCHER, SWITCH OFF MYCOOK AND
WAIT A FEW SECONDS FOR THE BLADES
TO STOP TURNING COMPLETELY.
6
The pitcher (Image 11)
To fit the lid:
Fit the back tab into the handle groove
(Image 15), lower the front part (Image
16) and push the lid in the direction of
the arrow (Image 17a) until you hear a
click, which will indicate that it has been
attached correctly.
Image 11
Image 12
Image 13
The pitcher has a maximum capacity of
2 litres. On the inside it has a measure
scale, which indicates 1 litre, 1.5 litres
and 2 litres (Images 11 and 12).
To remove the lid:
Slide the handle control downwards and,
when the lid has become detached, take
it out by pulling it (Images 13 and 14).
Image 14
Image 15
Image 16
Image 17a
You can also proceed by
(Image 17b)
7
To attach the pitcher:
Hold the pitcher by the handle and place
it onto the central unit, making sure the
arrows of the pitcher base and central unit
are lined up correctly. Turn the pitcher
in an anti-clockwise direction until the
arrow of the pitcher base coincides with
the lock of the central unit (Image 18).
Image 17b
Image 18
Image 19
To detach the pitcher:
Hold the pitcher by its handle and turn in an anti-
clockwise direction up to the limit (both arrows
coinciding) and lift the pitcher (Image 19).
Important: For safety reasons, the pitcher
cannot be covered or uncovered when it
is attached to the central unit. The arrow
of the pitcher base coincides with the
lock of the central unit. (Image 18)
Do not use force. A safety element might
be broken.
To cover or uncover the pitcher it must be
detached from the central unit turning it
clockwise until it comes off. (Make sure
that the arrow on the side of the pitcher
coincides with the arrow on the central
unit (Image 19).
Do not activate the heating function with
the pitcher empty.
Pitcher support with blade-fixing flange
(Image 20)
Image 20
Image 21
The pitcher support is for:
1. Fixing the blades to the pitcher.
2. Fixing the pitcher to the central unit.
3. Supporting the pitcher when it is hot
on all types of surface, without causing
burns. (Image 21)
8
Blades (Image 22)
To position the blades inside the
pitcher:
1. Place the blades inside the fitting of
the pitcher, taking care not to cut yourself
(Image 25).
2. Turn the pitcher around, keeping hold
of the blades in its fitting (Image 26).
Image 22
Image 23
Image 24
The blades have two lateral pivots in their
support which are for centering them and
fixing them correctly to the pitcher.
To remove the blades from the pitcher:
1. Move the blade-fixing flange 180º to
the open position and pull the pitcher
support away, as indicated by the arrows
(Images 23 and 24).
2. Remove the blades carefully to avoid
cuts or other injuries (Image 25)
Image 25
Image 26
Image 27
3. Fit the pitcher support (with the fixed
blade flange in the open position) onto
the blade and the three pivots at the base
if the pitcher (Image 27).
4. Turn the blade-fixing flange 180º to
the closed position, ensuring that it is at
its limit (Image 28)
9
Important. The blades must always have
the joint correctly positioned. Take special
care when handling the blades as they are
very sharp. Never submerge the blades in
water or wash them in a dishwasher, as
the internal mechanism could become
damaged if water got inside.
Spatula (Image 29)
To detach the spatula handle:
Hold it with one hand and press on the
safety ring with your thumb
(Image 30b).
Image 28 Image 30a
Image 30b
Image 30c
Image 29
The spatula is for mixing ingredients,
preventing them from sticking to the
walls of the pitcher and emptying the
contents of the pitcher.
It is made up of two main pieces:
El head and the handle
The head, which has a safety ring
preventing access to the blades and, at
the end, a detachable case made of a
soft rubber material so that the pitcher
will not be scratched. (Image 30a)
To attach the spatula:
Fit both parts together and press.
(Image 30c)
10
Important: Never introduce the spatula
into the central hole of the lid, if working
with the blending blade fixed to the
blades. (Image 31)
The blending blade is used for:
1. For whipping cream, custards, egg
whites...
2. For mixing ingredients without blending
them.
3. To avoid ingredients sticking to the
walls of the jar when working with hot
substances.
To attach the blending blade:
Attach it in a single position over the
blades and pressing softly downwards
until you hear a click, which indicates
that it is properly anchored. (Image 34)
Image 33
Image 31
Image 32
Attention. Never use utensils other than
the spatula. It can be dangerous. (Image
32)
Mixing accessory (Image 33)
Image 34
Image 35
To detach the blending blade:
Pull upwards until it becomes detached.
(Image 35)
Important: Never use the mixing blade
at speeds higher than speed 5. Never
introduce the spatula into the central
hole of the lid, if working with the mixing
accessory fixed to the blades.
(Image 31)
11
IMPORTANT: WHEN COOKING
WITH HEAT OR STEAMING, HIGH
TEMPERATURES ARE REACHED. BE
CAREFUL WHEN HANDLING THE
APPLIANCE AND ITS ACCESSORIES,
ESPECIALLY THE METALLIC PARTS,
AS THERE IS A RISK OF SUFFERING
BURNS
Instructions for use
Central unit control panel (Image 36)
A Digital screen
B Time selector control
C Light indicator for activated
kneading function
D Kneading/mixing button
E Turbo speed button
F Lit temperature indicators
G Temperature selector control
H Speed light indicators
I Speed selector control
Central Unit (Image 37)
Image 36
Image 37
J Air vents
K Pitcher presence sensors
L Dragging blades
M Electrical connection cable
N On/Off switch
0 Pitcher temperature sensor
Position the appliance on a flat, stable
surface, which can withstand high
temperatures, away from other sources of
heat and the splashing of water.
Do not cover or obstruct the air vent
situated at the back of the appliance.
- Take out the length of cable required
from the cable housing. (Image 38).
12
- Connect the appliance to the mains.
- Turn the appliance on, activating the
on/off switch (Image 38). The appliance
carries out a self-check and 00:00
appears on the digital screen.
(Image 39)
Icons indicating control in the central
part:
T Timer
Icons indicating information in the lower
part:
U Pitcher missing/pitcher
wrongly covered or pitcher wrongly
attached to the central unit.
V The pitcher and the temperature
sensor are hot.
X Timer ended.
Timer selector control (Image 41)
Image 38
Image 39
Image 41
Image 40
On/Off switch
The appliance is now ready for use.
Digital screen (Image 40)
Icons indicating function in the upper
part:
Q Blades activated
R Heating activated
S Timer activated
Turn the control slowly to the right to
select the function time. Maximum: 90
minutes.
Turn the control slowly to the left to
reduce the time.
Activation scale:
From 0 to 1 minute. Counted in
seconds.
From 1 minute to 10 minutes. Counted
in 30 second intervals
From 10 minutes to 90 minutes. Counted
in minutes.
Turning the control quickly allows a faster
selection.
S
13
Kneading/mixing button (Image 42) Turbo speed button (Image 44)
Image 42
Image 43
Press the button to activate the kneading/
mixing function. The light indicator
lights up green and begins to count the
operating time.
Press the button to stop the kneading/
mixing function. The light indicator
switches off.
After the kneading/mixing function
finishes and after previously selecting
a functioning time, the appliance emits
a warning sound and the light indicator
flashes. (Image 43)
To stop:
Press the kneading/mixing button again.
This function is suitable for the
preparation of homogenous mixes of all
kinds of dough and mixtures.
The kneading/mixing function is activated
from a stop position. It is not advisable
to activate this function if the pitcher is
at a temperature higher than 60º C.
Image 44
Keep the button pressed to activate the
turbo function. The 10 maximum speed
light indicators will light up (Image 44).
If working without heat: When the button
is released the turbo function stops. The
maximum speed light indicators will
switch off.
If working with heat: For safety reasons
and in order to avoid slashes, the turbo
speed will increment progressively and
will function alone for a few seconds,
although the button should still be
pressed.
It is not possible to activate the turbo
function with speeds 1, 2 and 3.
The turbo function is the fastest and the
most powerful and is ideal for chopping
hard elements or a large quantity of
them.
14
How to process when hot
Follow the procedure below:
1st. Select time. Turn the time selector
control slowly to the right/left to select
the function time. (Image 45)
3rd. Select speed. Turn the speed
selector control slowly to the right/left
to select the function speed. The light
indicators of the speed selected will light
up in green and the light indicators of
the temperature selected will then light
up in red. The appliance begins to heat
up (Image 47).
Image 45
Image 46
2nd. Select temperature. Turn the
temperature selector control slowly to the
right/left to select a heating temperature.
The light indicators of the temperature
selected will light up in green.
(Image 46)
Image 47
Attention. Use speed 1 only for
browning.
Do not activate the heating function with
the pitcher empty.
When the operation ends, the appliance
gives out a warning sound, the light
indicators of the selected temperature
flash and the blades begin to turn at
speed 2 (light indicators lit up in green)
to prevent the food from sticking or
burning. (Image 48)
15
How to process when cold:
Turn the control slowly to the right/left
to select the function speed. The light
indicators of the selected speed light
up in green and the appliance turns on
(Image 49).
Image 48
Image 49
To stop:
Turn the speed selector to the left until
the speed light indicators go out.
IMPORTANT: ALWAYS STOP THE
APPLIANCE USING THE SPEED
SELECTOR CONTROL. BEFORE LIFTING
THE LID OF THE PITCHER WAIT A
FEW SECONDS UNTIL THE BLADES
HAVE STOPPED COMPLETELY. NEVER
OPEN THE PITCHER LID WHEN THE
APPLIANCE IS OPERATING, AS THERE
IS A RISK OF OVERFLOWING AND/OR
BURNS.
When the operation ends, after the
operating time has been selected, the
appliance gives out a warning sound
and the light indicators of the selected
temperature flash (Image 50).
16
To stop:
Turn the speed selector to the left until
the speed light indicators go out.
When the appliance starts operating and
the pitcher or lid is not properly attached,
it gives out a warning sound and the
digital screen displays the information
icon (Image 51).
After processing when hot, the digital
screen displays the information icon
illuminated: Pitcher and temperature
sensor hot (Image 52).
Image 50
Image 51
Image 52
To process when cold, the pitcher and
the temperature sensor must be cooled
(Image 2). To do this, cool the pitcher
under the tap, attach it to the central
unit and wait for the information icon to
turn off.
When the appliance will not be used for
a period of time:
1. Turn the appliance off, using the on/
off switch.
2. Unplug the appliance from the
mains.
3. Put the cable back in the cable
housing.
Cleaning
- Unplug the appliance from the mains
and let it cool before starting any
cleaning.
- Clean the equipment with a damp cloth
with a few drops of washing-up liquid
and then dry.
- Do not use solvents or products with
an acid or base ph such as bleach, or
abrasive products, for cleaning the
17
appliance.
- Do not let water or any other liquid get
into the air vents to avoid damage to the
inner parts of the appliance.
- Do not submerge the appliance in water
or any other liquid, or place it under a
running tap.
- During the cleaning process, take
special care with the blades, as they are
very sharp.
-It is advisable to clean the appliance
after every use, removing all traces of
food.
When you clean the metallic tray, it is
advisable to detach the joint and clean
it separately.
-All the accessories, EXCEPT THE
BLADES, can be washed in a dishwasher.
They can also be cleaned with soapy water
and a non-abrasive sponge or brush.
- Clean the blades with a brush under the
water from the tap so that contact with
the water only takes place on the upper
part of the blades.
(Image 53)
- You can also clean the inside of the
pitcher and blades by filling half the
pitcher with water and selecting the turbo
speed for hot or cold.
Anomalies and solutions
This appliance has electronic safety
systems incorporated to protect itself
and its owner in the case of overload or
misuse, showing alert or error messages
and emitting warning sounds.
Image 53
Important: Never submerge the blades in
water nor wash them in a dishwasher, as
the internal mechanism could become
damaged if water got inside.
- Do not put the pitcher in the dishwasher
with the blades fitted.
- Do not place the pitcher in the dishwasher
with the blades still in position.
18
ANOMALY MESSAGE ON
DIGITAL SCREEN
REPAIR
The digital screen displays
ERR4.
Possible overload of the motor.
Remove the food from the
pitcher.
The digital screen displays
ERR5.
Possible overload of the motor.
Leave the appliance to cool.
The digital screen displays
ERR1, 2, 3, 6, 7, 10.
Disconnect / connect the electrical
current. If “error” still appears,
write down the number and
take the appliance to the Taurus
Technical Assistance Services.
The digital screen displays
ERR8.
Possible overheating of the
induction.
Disconnect form the mains and
remove the pitcher. Leave to
cool.
The digital screen displays
ERR9.
Possible overheating of the
induction. Disconnect form the
mains and remove the pitcher.
Leave to cool. If “error” still
appears, write down the num-
ber and take the appliance to
the Taurus Technical Assistance
Services.
The digital screen displays
ERR11.
The pitcher and/or the lid have
become detached. Attach the lid
and the pitcher correctly.
19
If the connection to the mains has been
damaged, it must be replaced and you
should proceed as you would in the case
of damage. If the connection to the mains
has been damaged, it must be replaced
and you should proceed as you would in
the case of damage.
Ecology and recyclability
of the product
- The materials of which the packaging
of this appliance consists are included in
a collection, classification and recycling
system. Should you wish to dispose
of them, use the appropriate public
containers for each type of material.
- The product does not contain
concentrations of substances that
could be considered harmful to the
environment.
- Should you wish to dispose of the
product once its working life has ended,
take it to an authorised waste agent for
the selective collection of waste from
electric and electronic appliances.
Technical Characteristics
- Maximum capacity of the pitcher: 2
litres.
This equipment complies with Directive
2006/95/EEC for Low Voltage and Dire-
ctive 2004/108/EEC for Electromagnetic
Compatibility.
ANOMALY REPAIR
It does not turn on Check whether it is connected to the mains.
Check that the general switch is in an “ON” position.
Check that the lid and the pitcher are well attached.
It does not heat Check that you have done the following:
1 Selected time.
2 Selected temperature.
3 Selected speed.
It heats too much Check that you have selected the correct temperature.
Check that the temperature sensor is clean and that it
makes good contact with the pitcher.
20
d’une prise de terre et supportant 16
ampères.
- La prise de courant de l’appareil doit
coïncider avec la base de la prise de courant.
Ne jamais modifier la prise de courant. Ne
pas utiliser d’adaptateur de prise de courant.
- Ne pas utiliser, ni exposer l’appareil aux
intempéries.
- Si une des enveloppes protectrice de l’appareil
se rompt, débrancher immédiatement
l’appareil du secteur, pour éviter tout choc
électrique.
- Ne pas utiliser l’appareil s’il est tombé, s’il
y a des signes visibles de dommages ou en
cas de fuite.
- Ne pas enrouler le câble électrique. Ne
jamais utiliser le câble électrique pour lever,
transporter ou débrancher l’appareil.
- Éviter de laisser le câble électrique de
connexion entrer en contact à toute source de
chaleur de l’appareil.
- Débrancher et disposer de la longueur de
câble électrique nécessaire pour utiliser
l’appareil, en évitant des situations de risque
d’accident.
- Ne pas toucher la prise de raccordement
avec les mains mouillées.
Sécurité personnelle
- Prendre les précautions nécessaires pour
éviter de mettre en marche involontairement
l’appareil.
- Ne pas toucher les parties mobiles de
l’appareil lorsqu’il est en marche.
- Ne pas toucher les parties métalliques ou
le corps de l’appareil lorsqu’il est en marche,
afin d’éviter des brûlures.
Utilisation et entretiens
- Ne pas utiliser l’appareil si les accessoires
ou consommables assemblés présentent des
défauts.
Les changer immédiatement.
Français
Robot ménager avec fonction cuisson
Mycook 1.8
Conseils et mesures de
sécurité
- Lire attentivement cette notice d’instructions
avant de mettre lappareil en marche et la
conserver pour toute consultation ultérieure.
La non observation et application de ces
instructions peuvent entraîner un accident.
- Avant le premier usage, nettoyer toutes
les parties du produit qui peuvent entrer en
contact avec les aliments, en procédant tel
qu’indiqué dans la section nettoyage.
Environnement d’utilisation ou de travail
- Cet appareil chauffe par induction. Ne
pas poser d’objets métalliques (couteaux,
fourchettes, cuillères et couvercles) sur le plan
de travail, parce qu’ils pourraient se chauffer.
- Pendant la manipulation de l’appareil,
les enfants et curieux devront se maintenir
éloignés.
- Poser l’appareil sur une surface horizontale,
stable et apte pouvant supporter des
temratures élees, éloignée de toute autre
source de chaleur et d’éclaboussures d’eau.
Sécurité électrique
- Ne pas utiliser l’appareil si son ble
électrique ou sa prise est endommagé.
- Avant de raccorder l’appareil au secteur,
s’assurer que le voltage indiq sur la plaque
signalétique correspond à celui du secteur.
- Brancher lappareil à la base qui est munie
21
Image 1
Image 2
- Ne pas utiliser l’appareil si les accessoires
ou consommables ne sont pas correctement
assemblés.
- Ne pas utiliser l’appareil si le bol mixeur
est vide.
- Ne pas utiliser lappareil si son dispositif de
marche/arrêt ne fonctionne pas.
- Ne pas faire bouger ou déplacer l’appareil
lorsqu’il est en marche.
- Ne pas surpasser la capacité de pesage de
l’appareil.
- Respecter les niveaux MAXIMUM ET
MINIMUM.
- Après son utilisation, éteindre l’appareil, ne
pas se fier du détecteur du récipient.
- Débrancher l’appareil du secteur tant qu’il
reste hors d’usage et avant de procéder à
toute opération de nettoyage, d’ajustage, de
réglage, de mise en place ou de changement
d’accessoires.
- Cet appareil est uniquement destiné à un
usage domestique et non professionnel ou
industriel.
- Cet appareil a été conçu pour être utilisé
par des adultes. Ne pas laisser des personnes
non familiarisées avec ce type de produit,
des personnes handicapées ou des enfants,
l’utiliser.
- Laisser lappareil hors de pore des enfants
et/ou des personnes handicapées.
- Cet appareil nest pas un jouet. Les enfants
doivent être surveillés pour s’assurer qu’ils ne
jouent pas avec l’appareil.
- Ne pas ranger l’appareil s’il est encore
chaud.
- Vérifier que les grilles de ventilation de
l’appareil ne soient pas bouchées par la
poussière, saleté ou autres objets.
- Garder l’appareil en bon état. rifiez que
les parties mobiles ne soient pas désalignées
ou coincées, qu’il ny a pas de pièces cassées
ou d’autres conditions qui puissent affecter le
bon fonctionnement de l’appareil.
- Vérifier périodiquement le parfait état
d’usage du joint du couvercle.
- Vérifier que le couvercle soit parfaitement
fermé avant de mettre en marche l’appareil.
- Ne pas retirer le couvercle tant que le liquide
du récipient soit bouillant.
- Toujours utiliser l’appareil sous surveillance.
- Surtout, faire attention pendant les orations
de montage, démontage des accessoires,
puisque les lames sont aiguisées, procéder
avec précaution et éviter le contact direct avec
leur tranchant.
- Toute utilisation inaquate ou non conforme
aux instructions d’utilisation comporte un
risque, invalide la garantie et annule la
responsabilité du fabricant.
- Pour un fonctionnement correct, maintenir
la base du bol et le capteur de temrature
du bol propres (Images 1 et 2).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90

AFG Mycook 1.8 Manuel utilisateur

Taper
Manuel utilisateur