Ninja BL682 Manuel utilisateur
- Catégorie
- Mélangeurs
- Taper
- Manuel utilisateur
®
BL682
OWNER’S GUIDE
GUIDE DU PROPRIÉTAIRE
GUÍA DEL USUARIO
ninjakitchen.com
1 877 646-5288
1
1-877-646-5288
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE
USING YOUR NUTRI NINJA
®
|
NINJA
®
BLENDER SYSTEM WITH AUTO-iQ
™
TECHNOLOGY.
POLARIZED PLUG
WARNING: To reduce the risk
of electric shock, this appliance has a
polarized plug (one blade is wider than
the other). This plug will fit into a
polarized outlet only one way. If the
plug does not fit fully into the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install
the proper outlet. DO NOT modify the
plug in any way.
WARNING: Extension cords are not
recommended for use with this product.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
INJURY:
1 WARNING: Remove utensils prior to
processing. Failure to remove may cause the
jar to be damaged or to shatter which may
cause personal injury.
2 WARNING: The blade assemblies are
sharp, not locked in place and removable,
handle with care. When handling the blade
assemblies, always hold by the shaft.
Failure to do so will result in a risk of
laceration.
3 WARNING: Stacked Blade Assembly is
sharp and not locked in place. If using the
pour spout, ensure the lid is fully locked
onto the pitcher. If pouring with the lid
removed, carefully remove the Stacked
Blade Assembly first, holding it by the shaft.
Failure to do so will result in a risk of
laceration.
4 WARNING: Chopping Blade Assembly is
sharp and not locked in place. Before
emptying contents carefully remove lid and
Chopping Blade Assembly, holding it by the
shaft. Failure to do so will result in a risk of
laceration.
5 CAUTION: Do not blend hot liquids, doing
so may cause excessive pressure build-up,
resulting in risk of the user being burned.
6 CAUTION: We do not recommend grinding
in any of our Nutri Ninja
®
Cups.
7 CAUTION: Remove the Pro Extractor
Blades
®
Assembly from the Nutri Ninja cup
upon completion of blending. Some
ingredients have the potential to expand
after blending resulting in excessive
pressure buildup that can pose a risk of
injury.
2
www.ninjakitchen.com
English
8 To protect against electrical shock, do not
submerge the appliance or allow the power cord
to come into contact with water or any other
liquid.
9 DO NOT allow the appliance to be used by
children. Close attention is necessary when used
near children. This is not a toy.
10 Never leave an appliance unattended when in
use.
11 Appliance accessories are not intended to be
used in the microwave as it may result in damage
to the accessories.
12 Turn the appliance Off and remove the power
cord from the electrical outlet when not in use,
before assembling or disassembling parts and
before cleaning. To unplug, grasp the plug and
pull from the electrical outlet. Never pull from the
power cord.
13 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it to
disconnect from electrical outlet; instead grasp
the plug and pull to disconnect.
14 DO NOT operate any appliance with a damaged
cord or plug, or after the appliance malfunctions,
has been dropped or damaged in any manner.
This appliance has no serviceable parts. Return
the appliance to SharkNinja Operating LLC for
examination, repair or adjustment.
15 DO NOT let the power cord hang over the edge of
table or counter or touch hot surfaces such as the
stove.
16 Always use appliance on a dry, level surface.
17 Keep hands, hair, clothing, as well as utensils
out of container while processing to reduce the
risk of severe injury to persons or damage to the
appliance. A scraper may be used but only when
the appliance is not running.
18 Avoid contact with moving parts.
19 DO NOT attempt to sharpen blades.
20 DO NOT use the appliance if blade assemblies
are bent or damaged.
21 To reduce risk of injury, never place the blade
assemblies on the base without the pitcher or
Nutri Ninja cup properly attached.
22 DO NOT operate this appliance on or near any
hot surfaces (such as gas or electric burner or in
a heated oven).
23 The use of attachments or accessories
including canning jars, not recommended by the
manufacturer may result in fire, electric shock or
personal injury.
24 DO NOT remove the container from the motor
base while the appliance is in operation.
25 To reduce the risk of injury, NEVER operate the
appliance without the lid in place; DO NOT try
to defeat the interlock mechanism; make sure
that the attachment is properly installed before
operating the appliance.
26 DO NOT expose containers to extreme
temperature changes.
27 DO NOT overfill.
28 DO NOT operate the appliance empty.
29 To reduce the risk of burns, always allow the
appliance to cool before taking off parts and
before cleaning.
30 In the event that the unit overloads, the control
panel lights will flash and the unit will shut down.
Unplug the appliance and let it cool down for
approximately 15 minutes before using again.
31 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
32 The maximum rating is based on the Stacked
Blade Assembly (pitcher) that drives the greatest
power and other recommended attachments may
draw significantly less power or current.
SAVE THESE
INSTRUCTIONS
3
1-877-646-5288
LORS DE L’USAGE D’UN APPAREIL
ÉLECTRIQUE, DES MESURES DE
SÉCURITÉ ÉLÉMENTAIRES DEVRAIENT
TOUJOURS ÊTRE RESPECTÉES, Y
COMPRIS LES MESURES SUIVANTES :
LISEZ TOUTES LES CONSIGNES
AVANT D’UTILISER VOTRE SYSTÈME
MÉLANGEUR NUTRI NINJA
MD
|
NINJA
MD
AVEC LA TECHNOLOGIE AUTO-iQ
MC
.
FICHE POLARISÉE
AVERTISSEMENT :
Afin de réduire les risques d’électrocution,
cet appareil a été muni d’une fiche
polarisée (une lame est plus large que
l’autre). Cette fiche ne peut être insérée
que d’un seul côté dans une prise
polarisée. Si la fiche ne s’insère pas
complètement dans la prise de courant,
inversez-la. Si elle ne s’adapte toujours
pas, contactez un électricien compétent
afin d’installer la prise murale appropriée.
N’altérez la fiche d’AUCUNE façon.
AVERTISSEMENT :
Il n’est pas recommandé d’utiliser des
rallonges électriques pour brancher
cetappareil.
CONSIGNES DE SÉCURITÉ IMPORTANTES
Pour usage domestique seulement
pas verrouillé dans le récipient. Manipulez-le
avec soin. Lorsque vous manipulez le jeu de
lames superposées, tenez toujours l’arbre de
cette pièce. Le non-respect de cette consigne
peut entraîner des lacérations.
3 AVERTISSEMENT : Le jeu de lames
superposées est tranchant et n’est pas verrouillé
dans le récipient. Si vous transvidez un mélange
par le bec verseur, assurez-vous que le
couvercle est bien verrouillé sur le pichet. Pour
verser sans le couvercle, retirez d’abord le jeu de
lames superposées avec précaution en le tenant
par le manche. Ne pas procéder de la sorte
augmente le risque de lacération.
4 AVERTISSEMENT : Les lames de hachage
sont coupantes et la tige n’est pas verrouillée en
place. Avant de vider le contenu, retirez
délicatement le couvercle et le jeu de lames de
hachage, en le tenant par la tige. Ne pas
procéder de la sorte augmente le risque de
lacération.
5 MISE EN GARDE : Ne mélangez pas des
liquides chauds, car cela pourrait entraîner une
accumulation de pression et causer des risques
de brûlure.
6 MISE EN GARDE : Nous ne recommandons
pas l’utilisation des gobelets Nutri Ninja
MD
pour moudre des ingrédients.
7 MISE EN GARDE : Retirez le jeu de lames
Pro Extractor
MD
de la tasse Nutri Ninja après
avoir mélangé les ingrédients. Certains
ingrédients peuvent se dilater lorsqu’ils sont
broyés, ce qui peut créer une accumulation de
pression excessive et poser un risque de
blessures.
8 Pour éviter les risques d’électrocution, n’immergez
pas l’appareil et assurez-vous que le cordon
d’alimentation n’entre pas en contact avec l’eau ou
un autre liquide.
9 NE LAISSEZ PAS l’appareil être utilisé par des
enfants. Une surveillance attentive est nécessaire
lors de l’utilisation à proximité des enfants. Ceci
n’est pas un jouet.
AVERTISSEMENT :
POUR RÉDUIRE LE RISQUE D’INCENDIE,
D’ÉLECTROCUTION ET DE BLESSURES :
1 AVERTISSEMENT : Enlevez les ustensiles
avant de mélanger les aliments. Le non-respect
de cette directive pourrait endommager ou faire
éclater le récipient, ce qui pourrait causer des
blessures.
2 AVERTISSEMENT : Le jeu de lames
superposées est tranchant et amovible; il n’est
Français
4
www.ninjakitchen.com
10 Ne laissez jamais l’appareil sans surveillance
pendant l’utilisation.
11 Les accessoires accompagnant l’appareil ne
sont pas conçus pour l’utilisation dans le four à
micro-ondes, car cela pourrait endommager les
accessoires.
12 Veuillez éteindre l’appareil (position « Off ») et
débrancher le cordon d’alimentation de la prise
de courant lorsqu’il n’est pas utilisé et avant le
nettoyage, l’assemblage ou le démontage des
pièces. Pour débrancher l’appareil, tirez sur la fiche
et retirez-la de la prise d’alimentation. Ne tirez
jamais sur le cordon.
13 PRENEZ SOIN du cordon d’alimentation. Ne
transportez jamais l’appareil en le tenant par
le cordon. Ne débranchez jamais l’appareil de
l’alimentation électrique en tirant sur le cordon. Pour
débrancher l’appareil, tirez sur la fiche et retirez-la
de la prise d’alimentation.
14 N’UTILISEZ PAS l’appareil si sa fiche ou son
cordon est endommagé(e), s’il a fait défaut, s’il a
été échappé ou endommagé. Retournez l’appareil
à SharkNinja Operating LLC pour vérification,
réparation ou réglage.
15 NE LAISSEZ PAS le cordon traîner sur le dessus
d’une table ou d’un comptoir. Ne le laissez pas
entrer en contact avec des surfaces chaudes,
comme la cuisinière.
16 Posez toujours l’appareil sur une surface sèche et
de niveau.
17 Afin de réduire le risque de blessures graves ou
de dommages à l’appareil, gardez les mains, les
cheveux, les vêtements et les ustensiles hors du
récipient pendant l’utilisation. Vous pouvez utiliser
une raclette, mais seulement lorsque le mélangeur
est éteint.
18 Évitez le contact avec les pièces mobiles.
19 NE TENTEZ PAS d’affûter les lames.
20 N’UTILISEZ PAS l’appareil si l’ensemble de lames
est tordu ou endommagé.
21 Pour réduire les risques de blessures, ne déposez
jamais les jeux de lames sur la base sans fixer le
pichet ou une tasse Nutri Ninja correctement.
22 N’UTILISEZ PAS cet appareil sur ou près des
surfaces chaudes (telles qu’un brûleur à gaz ou
électrique ou dans un four chauffé).
23 L’usage des attachements accessoires, y compris
les pots de conserve, n’est pas recommandé par le
fabricant du fait qu’il peut causer un incendie, une
décharge électrique ou une blessure corporelle.
24 N’ENLEVEZ PAS le contenant du bloc-moteur
pendant que l’appareil est en marche.
25 Afin de réduire le risque de blessure, N’UTILISEZ
JAMAIS l’appareil sans le couvercle en place.
N’ALLEZ PAS à l’encontre du mécanisme de
verrouillage ; assurez-vous que l’attachement soit
correctement monté avant d’utiliser l’appareil.
26 N’EXPOSEZ PAS les récipients aux changements
de température extrêmes.
27 NE REMPLISSEZ PAS excessivement le récipient.
28 N’UTILISEZ PAS l’appareil lorsqu’il est vide.
29 Afin de réduire le risque de brûlures, permettez
toujours à l’appareil de refroidir avant de retirer les
pièces et le nettoyer.
30 Dans le cas d’une surcharge, les indicateurs du
panneau de commande de l’appareil clignoteront et
l’appareil arrêtera. Débranchez l’appareil et laissez-
le refroidir pendant environ 15 minutes avant de
l’utiliser de nouveau.
31 CE PRODUIT EST CONÇU POUR L’USAGE À
DOMICILE SEULEMENT. N’utilisez pas l’appareil
à d’autres fins que celles prévues. N’utilisez pas
l’appareil à l’extérieur.
32 La notation maximale est basée sur le jeu de
lames superposées (pichet) qui procure le plus de
puissance. D’autres accessoires recommandés
peuvent nécessiter significativement moins de
puissance ou de courant.
VEUILLEZ
CONSERVER CES
DIRECTIVES
5
1-877-646-5288
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Para uso doméstico solamente
AL USAR APARATOS ELÉCTRICOS,
SIEMPRE DEBE SEGUIR PRECAUCIONES
BÁSICAS DE SEGURIDAD, INCLUYENDO
LAS SIGUIENTES:
LEA TODAS LAS INSTRUCCIONES ANTES
DE USAR SU NUTRI NINJA
®
I SISTEMA
DE LICUADORA NINJA
®
CON AUTO-iQ
MR
TECHNOLOGY.
ENCHUFE POLARIZADO
ADVERTENCIA: Para reducir
el riesgo de una descarga eléctrica,
este artefacto posee un enchufe
polarizado (una pata es más ancha que
la otra). Este enchufe sólo puede
conectarse a un tomacorriente
polarizado de una sola forma. Si el
enchufe no entra completamente en el
tomacorriente, inviértalo. Si aun así no
entra completamente, llame a un
electricista calificado para que instale
un tomacorriente apropiado. NO intente
modificar el enchufe de ninguna
manera.
ADVERTENCIA: No se
recomienda usar cables de extensión con
este producto.
ADVERTENCIA:
PARA REDUCIR EL RIESGO DE INCENDIO, DESCARGA
ELÉCTRICA O DAÑOS PERSONALES:
1 ADVERTENCIA: Retire los utensilios antes
de procesar alimentos. De lo contrario, la
jarra podría dañarse o romperse y causar
lesiones personales.
2
ADVERTENCIA: Las cuchillas apiladas
son filosas, no quedan trabadas en su lugar
y son removibles; manipúlelas con cuidado.
Al manipular las cuchillas apiladas, siempre
sosténgalas del vástago. De lo contrario,
podría cortarse.
3
ADVERTENCIA: Las cuchillas apiladas
son filosas y no quedan trabadas en su
lugar. Si usa el pico vertedor, asegúrese de
que la tapa esté completamente trabada en
la jarra. Si vierte el contenido con la tapa
retirada, antes retire cuidadosamente las
cuchillas apiladas sosteniéndolas del
vástago. De lo contrario, podría cortarse.
4 ADVERTENCIA: Las cuchillas de corte
son filosas y no quedan trabadas en su
lugar. Antes de vaciar el contenido, retire
cuidadosamente la tapa y las cuchillas de
corte sosteniéndolas desde el eje. De lo
contrario, podría cortarse.
5 CUIDADO: : No licúe líquidos calientes,
ya que hacerlo podría causar una
acumulación excesiva de presión y un
riesgo de quemaduras para el usuario.
6 CUIDADO: No recomendamos moler en
ninguna de las tazas Nutri Ninja
®
.
7 CUIDADO: Retire las cuchillas Pro
Extractor Blades
®
de la taza Nutri Ninja al
terminar de licuar. Algunos ingredientes
pueden expandirse después del licuado, lo
cual produce una acumulación excesiva de
presión, que puede presentar un riesgo de
lesiones.
Español
6
www.ninjakitchen.com
8 Para protegerse de una descarga eléctrica, no
sumerja el artefacto ni permita que el cable
de alimentación entre en contacto con agua o
cualquier otro líquido.
9 NO permita que el aparato sea utilizado por
niños. Se requiere supervisión cuando se usa
cerca de niños. Esto no es un juguete.
10 Nunca deje un artefacto desatendido cuando lo
use.
11 Los accesorios del artefacto no están diseñados
para usarlos en el microondas ya que podría
dañarlas.
12 Apague el artefacto y desenchufe el cable de
alimentación del tomacorriente cuando no lo use,
antes de colocarle o quitarle partes y antes de
limpiarlo. Para desenchufarlo, sujete el enchufe y
retírelo del tomacorriente. Nunca tire del cable de
alimentación.
13 NO maltrate el cable de alimentación. Nunca
levante el artefacto por el cable, o tire del cable
para desconectarlo del tomacorriente; agárrelo
por el enchufe y tire para desconectarlo.
14 NO utilice ningún artefacto si el cable o el
enchufe están dañados o luego de una falla, o
si ha sufrido cualquier tipo de daño. Retórnelo
a SharkNinja Operating LLC para que sea
examinado, reparado o ajustado.
15 NO permita que el cable cuelgue por el borde
de la mesa o mesada, o que toque superficies
calientes como la estufa.
16 Use siempre el artefacto sobre una superficie
seca y nivelada.
17 Mantenga sus manos, cabello, ropa y utensilios
fuera del recipiente al procesar para reducir la
posibilidad de daños graves a personas o de
dañar la unidad. Puede utilizar una espátula,
pero únicamente cuando el artefacto no esté
funcionando.
18 Evite tocar las partes móviles.
19 NO intente afilar las cuchillas.
20 NO use el artefacto si las cuchillas están
dobladas o dañadas.
21 Para reducir el riesgo de heridas, nunca coloque
las cuchillas en la base sin tener la jarra o el
tazón correctamente colocados.
22 NO use este artefacto sobre o cerca de
superficies calientes (como una estufa eléctrica o
de gas, o en un horno caliente).
23 El uso de accesorios no recomendados por el
fabricante puede causar incendios, descargas
eléctricas o daños personales.
24 NO saque la jarra de la base del motor mientras
el artefacto esté funcionando.
25 Para reducir el riesgo de heridas, NUNCA use
el artefacto sin la tapa colocada; NO intente
alterar el mecanismo de traba; verifique que los
accesorios estén correctamente instalados antes
de usar el artefacto.
26 NO exponga los recipientes a cambios bruscos de
temperatura.
27 NO llene la jarra de más.
28 NO haga funcionar este artefacto cuando esté
vacío.
29 Para reducir el riesgo de quemaduras, siempre
deje que el artefacto se enfríe antes de remover
partes o de limpiarlo.
30 Si la unidad se sobrecarga, las luces del panel
de control parpadearán y la unidad se apagará.
Desenchufe el artefacto y déjelo enfriar durante
unos 15 minutos antes de usarlo nuevamente.
31 ESTE PRODUCTO ELÉCTRICO ES PARA USO
DOMÉSTICO SOLAMENTE. No utilice este
artefacto para ningún otro destino distinto al
indicado. No lo utilice en el exterior.
32 La especificación máxima se basa en el uso del
accesorio de 6 cuchillas (jarra) que consume la
mayor cantidad de corriente y otros accesorios
recomendados pueden llegar a consumir mucha
menos corriente.
CONSERVE ESTAS
INSTRUCCIONES
7
1-877-646-5288
THIS BOOK COVERS MODEL NUMBER:
BL682
TECHNICAL SPECIFICATIONS
Voltage: 120V~, 60Hz.
Power: 1500 Watts
Pitcher Capacity: 72 oz. (9 cups, 2.1 L)
Max Liquid Capacity: 64 oz. (8 cups, 1.9 L)
Bowl Capacity: 64 oz. (8 cups, 1.8 L)
Nutri Ninja
®
Cup Capacity: 18 oz. (2.25 cups, 530 mL)
24 oz. ( 3 cups, 710 mL)
32 oz. (4 cups, 950 mL)
CE MANUEL CONCERNE LE MODÈLE :
BL682
SPÉCIFICATIONS TECHNIQUES
Tension : 120 V~, 60 Hz.
Alimentation : 1500 Watts
Capacité du pichet : 2,1 L (9 tasses, 72 oz)
Cap. max. de liquide : 1,9 L (8 tasses, 64 oz)
Capacité du bol 1,8 L (8 tasses, 64 oz)
Capacité du gobelet
Nutri Ninja : 530 ml (2,25 tasses, 18 oz)
710 ml (3 tasses, 24 oz)
950 ml (4 tasses, 32 oz)
ESTE MANUAL CUBRE EL MODELO:
BL682
ESPECIFICACIONES TÉCNICAS
Voltaje: 120 V, 60 Hz
Potencia: 1500 Vatios
Capacidad de la jarra: 72 onzas (9 tazas, 2,1 L)
Max Liquid Capacity: 64 onzas (8 tazas, 1,9 L)
Capacidad del tazón: 64 onzas (8 tazas, 1,8 L)
Nutri Ninja
®
Capacidad
del recipiente: 18 onzas (2,25 tazas, 530 mL)
24 onzas (3 tazas, 710 mL)
32 onzas (4 tazas, 950 mL)
8
www.ninjakitchen.com
English
Contents
Thank you for
purchasing the
Nutri Ninja
®
|
Ninja
®
Blender
System with
Auto-iQ
™
Technology.
Getting to Know Your Nutri Ninja
®
|
Ninja
®
Blender System with Auto-iQ
™
Technology ......9
Before First Use ........................................................................................................11
Assembly and Use of the Pitcher .................................................................................12
Assembly and Use of the Food Processor Bowl ............................................................14
Assembly and Use of the Nutri Ninja
®
Cups .................................................................16
Programs, Speed Settings & Uses ..............................................................................17
Care & Maintenance ..................................................................................................19
Troubleshooting Guide ................................................................................................20
Replacement Parts .....................................................................................................20
Warranty & Registration ..............................................................................................22
Table des matières
Merci d’avoir
acheté le système
mélangeur
Nutri Ninja
MD
|
Ninja
MD
avec
la technologie
AUTO-iQ
MC
.
Comprendre votre système mélangeur Nutri Ninja
MD
|
Ninja
MD
avec la technologie Auto-iQ
MC
...23
Avant la première utilisation .. ................................................................................................25
Assemblage et utilisation du pichet ........................................................................................26
Assemblage et utilisation du bol du robot culinaire .................................................................28
Assemblage et utilisation du gobelet Nutri Ninja
MD
..................................................................30
Programmes, réglages de vitesse et usages ..........................................................................31
Soins et entretien ..................................................................................................................33
Guide de dépannage .............................................................................................................34
Pièces de remplacement .......................................................................................................34
Garantie et enregistrement ....................................................................................................36
Índice
Gracias por
haber comprado
el sistema de
licuadora Ninja
®
Nutri Ninja
®
con Auto-iQ
MR
Technology.
Partes de su Nutri Ninja
®
|
Sistema de licuadora Ninja
®
con Auto-iQ
MR
Technology ........37
Antes de su Primera Utilización. .................................................................................39
Armado y uso de la licuadora .....................................................................................40
Armado y uso del tazón para procesar alimentos .........................................................42
Armado y uso de las tazas Nutri Ninja
®
.......................................................................44
Programas, Ajustes de velocidad y usos ......................................................................46
Cuidado y mantenimiento ...........................................................................................48
Guía de diagnóstico de problemas...............................................................................49
Partes de repuesto .....................................................................................................49
Garantía y registro ......................................................................................................51
Français Español
9
1-877-646-5288
Getting To Know Your Nutri Ninja
®
|
Ninja
®
Blender System with Auto-iQ
™
Technology
d e
a
k
m
b
f
j
c
l
f Food Processor Bowl
g Food Processor Lid
h Dough Blade Assembly
i Chopping Blade Assembly
a Jumbo Multi-Serve 32 oz. Nutri
Ninja Cup
b Regular 24 oz. Nutri Ninja Cup
c Small 18 oz. Nutri Ninja Cup
d Pro Extractor Blades
®
Assembly
e Sip & Seal
®
Lids (x3)
j Pitcher
k Pitcher Lid with Locking Handle
l Stacked Blade Assembly
m Motor Base
n Power Cord (not shown)
h
g
i
10
www.ninjakitchen.com
English
The Nutri Ninja
®
|
Ninja
®
Blender System with Auto-iQ
™
Technology is a professional, high powered innovative tool with
a sleek design and outstanding performance, a true asset to any kitchen. The Nutri Ninja
|
Ninja Blender System with
Auto-iQ Technology features intelligent programs that combine unique pulsing, blending and pausing patterns that do the
work for you! Get great results every time with no guesswork required! For best results, be sure to carefully read all the
instructions contained in the manual before using this appliance.
Nutri Ninja
®
|
Ninja
®
Blender System with Auto-iQ
™
Technology Features:
• Ninja Blade Technology
• BPA Free Pitcher, Nutri Ninja Cups, Food Processor Bowl and Lids
• Drip-Free Pour Spout
• Total Crushing
®
Technology
• LED Control Panel with Timer
• Sturdy, Non-Slip Base
• Smart Lid technology for easy release
• 3 speeds: Low/Dough, Medium, & High
• 5 Auto-iQ settings - Auto-iQ Frozen Drinks/Smoothies, Auto-iQ Food Puree, Nutri Ninja Auto-iQ Blend,
Nutri Ninja Auto-iQ Ultra Blend and Auto-iQ Pulse
• Nutri Ninja Nutrient & Vitamin Extraction*
* Extract a Drink Containing Vitamins & Nutrients From Fruits & Veggies
11
1-877-646-5288
Before First Use
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the Blade Assembly
in first.
IMPORTANT: Blade Assemblies are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
WARNING: Stacked
Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure the lid
is fully locked onto the
pitcher. Failure to do so
will result in a risk of
laceration.
WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If pouring with the lid
removed, carefully
remove the Stacked
Blade Assembly first,
holding it by the shaft. Failure to do so
will result in a risk of laceration.
WARNING: Chopping
Blade Assembly is sharp and
not locked in place. Before
emptying contents carefully
remove lid and Chopping
Blade Assembly, holding it by
the shaft. Failure to do so will result in a
risk of laceration.
CAUTION:
Do not immerse the motor base into
water or any other liquid.
1
Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2
Wash the lids, pitcher, food processor bowl, Nutri
Ninja
®
cups and Blade Assemblies in warm, soapy
water. When washing the blade assemblies, use a
dish-washing utensil with a handle to avoid direct hand
contact with blades.
CAUTION: Handle the Blade Assemblies with care
when washing, as the blades are very sharp.
3
Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4
The pitcher, food processor bowl, Nutri Ninja
®
cups,
lids, and Blade Assemblies, are all dishwasher safe.
It is recommended that the lids and blade assemblies
be placed on the top rack. Ensure that the blade
assemblies are removed from the containers before
placing in the dishwasher.
5
Wipe the motor base clean with a damp cloth.
12
www.ninjakitchen.com
English
ASSEMBLY
MED
LOW /
DOUGH
FROZEN DRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW /
DOUGH
AUTO
AUTO
AUTO
FROZEN DRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW /
DOUGH
AUTO
AUTO
AUTO
MED
LOW /
DOUGH
Fig. 5aFig. 4Fig. 3bFig. 1 Fig. 2
WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or
to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
Assembly and Use of the Pitcher
Fig. 3a
OR
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the Suction Cups adhere to the
counter or table top.
3 Align and lower the Pitcher onto the motor base.
(Fig. 1) Handle should be aligned slightly to the right of
the “LOCK” symbol on the motor base.
4 Rotate the pitcher clockwise until it clicks in place. As
the pitcher rotates, it will lower and the safety tabs on
the bottom of the pitcher will slide under the safety tabs
on the top of the motor base. (Fig. 2)
5 The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
6 Holding the Stacked Blade Assembly by the top of the
shaft, place it onto the drive gear inside the pitcher.
Ensure that the Stacked Blade Assembly is seated
properly and is standing upright. (Fig. 4)
NOTE: The Stacked Blade Assembly will fit loosely on
the drive gear.
7 Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the pitcher.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
“MAX” liquid mark (1.9 L) on the Pitcher.
8 Holding the lid by the handle in the upright position,
place it on top of the Pitcher aligning the triangle
( ) located on the lid with the triangle ( ) located on
the Pitcher’s handle. (Fig. 5a) Press the handle down
until you hear a click. The triangles on the lid and
the blender handle MUST be aligned in order for the
blender to turn on. (Fig. 5b)
IMPORTANT: As a safety feature, the power light
( ) will flash and the motor will not work if the
Pitcher and lid are not installed correctly. When
the Pitcher and lid are installed properly, the
power light ( ) will be solid, indicating that the
appliance is ready for use.
9 Plug the power cord into the electrical outlet and press
the power button ( ).
It’s best to add the liquid ingredients first and then the dry ingredients.
13
1-877-646-5288
Fig. 8
USE REMOVAL
Fig. 6
Fig. 9
Fig. 7
Fig. 10
Fig. 11
Assembly and Use of the Pitcher - cont.
10 Review warning and caution statements on page 12
before proceeding.
NOTE: Nutri Ninja
®
| Ninja
®
Blender with Auto-iQ
™
Technology can sense which jar is on the motor base.
The available function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 6)
11 Press the power button to turn on the unit. Select
the speed or Auto-iQ program that best suits your
needs. The Auto-iQ program will stop the appliance
automatically at the end of the program. (Fig. 7)
NOTE: Pulse ingredients for even chopping by holding
the Auto-iQ Pulse button until your desired consistency
is reached.
12 To pause the appliance, press the selected speed or
Auto-iQ program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
13 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 8)
14 Turn the pitcher counter clockwise to remove and then
lift off the base. (Fig. 9)
WARNING: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
15 Open the pour spout cap and use the spout to empty
liquid contents.
16 For thicker consistencies, first remove the lid by
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher. (Fig. 10)
17 Make sure that the unit is unplugged when not in use.
18 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 11)
14
www.ninjakitchen.com
English
NOTE: Nutri Ninja
®
|
Ninja
®
Blender System with Auto-
iQ
™
Technology can sense which jar is on the motor
base. The function lights will illuminate depending on
which jar is placed on the motor base. (Fig. 1)
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
3 Align and lower the Processor Bowl onto the motor
base. (Fig. 2) Handle should be aligned slightly to the
right of the “LOCK” symbol on the motor base.
4 Rotate the bowl clockwise until it locks in place, you will
hear a click when the lock is engaged. (Fig. 3)
5 The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 4a, Fig. 4b)
6 Holding the desired blade assembly by the top of the
shaft, place it onto the drive gear inside the bowl.
Ensure that the blade assembly is seated properly and
is standing upright. (Fig. 5)
NOTE: The blade will fit loosely on the drive gear.
7 Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
8 Holding the lid by the handle in the upright position,
place it on top of the Processor Bowl aligning the
triangle ( ) located on the lid with the triangle ( )
located on the Processor Bowl handle. (Fig. 6a) Press
the handle down until you hear a click. The triangles on
the lid and the Processor Bowl handle MUST be aligned
in order for the blender to turn on. (Fig. 6b)
NOTE: The 64 oz. bowl is not intended for blending
drinks. Do not overfill.
9 Plug the power cord into the electrical outlet and press
the power button ( ).
NOTE: As a safety feature, the power button ( ) will
flash and the motor will not work if the bowl and lid
are not installed correctly. When the bowl and lid
are installed properly, the power button ( ) will be
solid, indicating that the appliance is ready for use.
Assembly and Use of the Food Processor Bowl
ASSEMBLY
FROZEN DRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW /
DOUGH
AUTO
AUTO
AUTO
FROZEN DRINKS
SMOOTHIES
PUREE
PULSE
HIGH
MED
LOW /
DOUGH
AUTO
AUTO
AUTO
MED
LOW /
DOUGH
MED
LOW /
DOUGH
Fig. 1
MED
LOW /
DOUGH
Fig. 6b
WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying contents carefully
remove lid and Chopping Blade Assembly, holding it by the shaft. Failure to do will result in risk of
laceration.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to
shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the lid from the bowl upon completion of processing. Some ingredients have the potential
to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
Fig. 5 Fig. 6aFig. 2 Fig. 4bFig. 3
Fig. 4a
OR
15
1-877-646-5288
Assembly and Use of the Processor Bowl - cont.
Fig. 2 Fig. 3 Fig. 5Fig. 1 Fig. 4
REMOVALUSE
CHOPPING BLADE
ASSEMBLY
USE
DOUGH BLADE
ASSEMBLY
USING THE CHOPPING BLADE ASSEMBLY
1 Review warning and caution statements on page 14
before proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3 Secure the bowl onto the motor base.
4 Holding the Chopping Blade Assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that
the Chopping Blade Assembly fits around the gear shaft
and that it is standing straight. (Fig. 1)
5 Add the ingredients and secure the bowl lid onto the
bowl.
6 Plug the power cord into the electrical outlet and press
on the power button ( ). Select the speed or Auto-iQ
™
program that best suits your needs. Pulse ingredients
for even chopping by holding the Auto-iQ Pulse button
until your desired consistency is reached.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
7 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 2)
8 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
9 Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
10 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
USING THE DOUGH BLADE ASSEMBLY
1 Review warning and caution statements on page 14
before proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3 Secure the bowl onto the motor base.
4 Holding the Dough Blade Assembly by the shaft, place
it onto the gear shaft inside the bowl. Ensure that the
Dough Blade Assembly fits around the gear shaft and
that it is standing straight. (Fig. 5)
5
Add the ingredients and secure the bowl lid onto the
bowl.
6 Plug the power cord into the electrical outlet and press
on the power button ( ). Select the LOW/DOUGH
button and process until ingredients come together to
form a mass.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
7 Once finished making dough, stop the appliance by
pressing the power button ( ) and wait for the blade to
stop turning.
8 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
9 Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
10
To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
16
www.ninjakitchen.com
English
WARNING: Handle the Pro Extractor Blades
®
Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Some
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can
pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
NOTE: Nutri Ninja
®
| Ninja
®
Blender with Auto-iQ
™
Technology
can sense which jar is on the motor base. The available
function lights will illuminate depending on which jar is placed
on the motor base. (Fig. 1)
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
3 Add ingredients to the Nutri Ninja cup.
4 Place the Pro Extractor Blades
®
onto the cup and tightly
screw it on clockwise until you have a good seal. (Fig. 2)
5 Turn the Nutri Ninja cup upside down and place it onto the
motor base, aligning the tabs on the cup with the motor base.
Rotate the Nutri Ninja cup clockwise until it locks in place, you
will hear a click when the lock is engaged. (Fig. 3)
6 Press the power button on, and select the speed or Auto-iQ
program that suits your needs. (Fig. 4) The Auto-iQ program
will stop the appliance automatically at the end of the
program.
Fig. 2 Fig. 3
Assembly and Use of the Nutri Ninja
®
Cups
Fig. 4 Fig. 5 Fig. 6
ASSEMBLY USE REMOVAL
7 To pause the appliance, press the selected speed or Auto-iQ
program a second time. When the program is paused, the
light on the program button will flash until you press it again
to resume the rest of the program.
8
Once you have reached your desired consistency, stop the
appliance by pressing the power button and wait for the blade
to stop turning. Turn the Nutri Ninja cup counter-clockwise
and pull straight up to remove. (Fig. 5, Fig. 6)
NOTE: Do not overfill! To avoid spilling, do not add ingredients
past the “Max Liquid” line.
9
Turn the cup upright and remove the Pro Extractor Blades by
twisting the Pro Extractor Blades counter clockwise.
10
Place the Sip & Seal
®
lid onto the Nutri Ninja cup, twist to seal
and enjoy!
11 Make sure that the motor base is unplugged when not in use.
12 To release the motor base from the
counter or table top, place your hands
underneath both sides of the motor
base and gently pull the unit up and
towards you.
Fig. 1
17
1-877-646-5288
Programs, Speed Settings & Uses for the Pitcher
Programs, Speed Settings & Uses for the Food Processor Bowl
FUNCTION CONTAINER
BLADE
TYPE
SPEED or
PROGRAM
TYPE OF FOOD
Frozen Drinks /
Ice Crush
Pitcher
Stacked Blade
Assembly
Auto-iQ
™
Frozen Drinks/
Smoothies
Ice
Frozen Drinks
Smoothies
Pureeing Pitcher
Stacked Blade
Assembly
Auto-iQ Food Puree
Smoothies
Soups*
Milkshakes
FUNCTION CONTAINER
BLADE
TYPE
SPEED or
PROGRAM
TYPE OF FOOD
Mincing
Food Processor
Bowl
Chopping
Blade
Assembly
Auto-iQ Pulse
Onion
Garlic
Herbs
Kneading and
Dough Mixing
Food Processor
Bowl
Dough Blade
Assembly
Low/Dough
Bread Dough
Pie Dough
Pizza Dough
Pretzel Dough
Cookie Dough
Processing
Food Processor
Bowl
Chopping
Blade
Assembly
Auto-iQ Food Puree
Low/Dough
Medium
High
Pâtés
Stewed Fruits
Dips
Apple Sauce
Spreads
Baby Food
Emulsifying
Food Processor
Bowl
Chopping
Blade
Assembly
Low/Dough
Medium
Salad Dressings
Sauces*
Grinding
Food Processor
Bowl
Chopping
Blade
Assembly
Medium Meat
Grating
Food Processor
Bowl
Chopping
Blade
Assembly
Auto-iQ Pulse
High
Grated Cheese
Bread Crumbs
Spices
Chopping
Food Processor
Bowl
Chopping
Blade
Assembly
Auto-iQ Pulse
Salsa
Vegetables
Nuts
Batters
Food Processor
Bowl
Dough Blade
Assembly
Low/Dough
Cake Mixes
Batters
* When blending soups or sauces, make sure they’re cooled to room temperature first - Ninja
®
containers
are not intended for hot blending.
* When blending soups or sauces, make sure they’re cooled to room temperature first - Ninja containers
are not intended for hot blending.
18
www.ninjakitchen.com
English
Programs, Speed Settings & Uses for the Nutri Ninja
®
Cup
FUNCTION CONTAINER
BLADE
TYPE
SPEED or
PROGRAM
TYPE OF FOOD
Smoothies Nutri Ninja
®
Cup
Pro Extractor
Blades
™
Assembly
Nutri Ninja Auto-iQ
™
Blend
Smoothies
Frappes
Milkshakes
Protein Drinks
Green Smoothies Nutri Ninja Cup
Pro Extractor
Blades
Assembly
Nutri Ninja Auto-iQ Ultra
Blend
Frozen Fruits
Frozen Vegetables
Kale
Celery
Spinach
Seeds
Ice
Grating Nutri Ninja Cup
Pro Extractor
Blades
Assembly
Auto-iQ Pulse
High
Grated Cheese
Bread Crumbs
Spices
Chopping
Nutri Ninja Cup
Pro Extractor
Blades
Assembly
Auto-iQ Pulse
High
Salsa
Vegetables
Nuts
19
1-877-646-5288
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any blade assembly and before
cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all parts from each other.
2
Hand Washing: Wash the lids, pitcher, food processor
bowl, Nutri Ninja cup, and blade assemblies in warm,
soapy water. When washing the blade assemblies, use
a dish-washing utensil with a handle to avoid direct
hand contact with blades. Handle blade assemblies
with care to avoid contact with sharp edges. Rinse and
air dry thoroughly.
Dishwasher: The containers, lids, blade assemblies
and attachments are all dishwasher safe. The lids
and blade assemblies are top rack dishwasher safe.
Ensure that the blade assemblies are removed from the
containers before placing in the dishwasher.
WARNING: Handle the Blade Assemblies with
care when washing, as the blades are sharp.
Contact with the blades’ edges can result in
laceration.
3
Wipe the motor base clean with a damp cloth
.
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
Care & Maintenance
HOW TO STORE
1 Store the Nutri Ninja
®
|
Ninja
®
Blender System with
Auto-iQ
™
Technology upright
with the blade assembly
inside the corresponding container with the lid secured
on top. Do not place anything on top. Store the rest of
the attachments in a safe place where they will not be
damaged and won’t cause harm.
Wrap the power cord
around the cord wrap on the back of the motor base.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja
|
Ninja Blender System with Auto-iQ
Technology
features a unique safety system which
prevents damage to the unit’s motor and drive system
should you inadvertently overload your appliance. If
the appliance is being overloaded, the motor
will stop. Allow the appliance to cool for
approximately 15 minutes. To reset the appliance,
follow the resetting procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the Blade Assembly or attachments.
3
Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
Ninja BL682 Manuel utilisateur
- Catégorie
- Mélangeurs
- Taper
- Manuel utilisateur
dans d''autres langues
- English: Ninja BL682 User manual
- español: Ninja BL682 Manual de usuario
Documents connexes
-
Ninja BL642 Le manuel du propriétaire
-
Ninja BL480D Manuel utilisateur
-
Ninja BL610 Mode d'emploi
-
Ninja BL770 Guide d'installation
-
Ninja BL456 Mode d'emploi
-
Ninja BL682 Le manuel du propriétaire
-
-
-
-
