Health O Meter Pro Plus 2650KL Manuel utilisateur

PRO PLUS

TM

ELECTRONIC WHEELCHAIR SCALE

MODEL 2650KL

BALANCE ELECTRONIQUE PRO PLUS

TM

POUR FAUTEUIL ROULANT

MODELE 2650KL

BALANZA ELECTRONICA PRO PLUS

TM

PARA SILLON DE RUEDAS

MODELO 2650KL

OPERATION MANUAL

MODE D'EMPLOI

MANUAL DE OPERACIÓN

1

PRO PLUS

TM

ELECTRONIC WHEELCHAIR SCALE

MODEL 2650KL

Thank you for your purchase of this product.

Please read this manual carefully and keep it handy for ready reference.

Merci d'avoir acheté ce produit.

Veuillez lire attentivement ce manuel et le garder à portée de main pour pouvoir le consulter à

tout moment

Gracias por la adquisición de este producto.

Lea por favor este manual cuidadosamente y manténgalo a su alcance para una pronta

referencia.

ENGLISH............................................................................................ 1

FRANÇAIS......................................................................................... 24

ESPAÑOL .......................................................................................... 47

TABLE OF CONTENTS

CAUTION AND WARNING....................................................................................................2

SPECIFICATIONS.................................................................................................................2

ASSEMBLY INSTRUCTIONS ...............................................................................................3

SET UP .................................................................................................................................6

OPERATION INSTRUCTIONS..............................................................................................7

MAINTENANCE.....................................................................................................................18

TROUBLESHOOTING...........................................................................................................19

CALIBRATION PATH............................................................................................................20

EXPLODED VIEW OF SCALE..............................................................................................20

PARTS LIST..........................................................................................................................22

WARRANTY..........................................................................................................................23

2

CAUTION AND WARNING

To prevent injury and damage to your scale, please follow these instructions very carefully.

• Do not transport the scale while the platform is loaded.

• For accurate weighing the scale must be placed on a flat, stable surface.

• For accurate weighing, verify proper operation according to the procedure described in this

manual before each use.

• Do not use in the presence of flammable materials.

• Operating at other voltages and frequencies than specified could damage the equipment.

• If the “LOW BAT” indicator activates, for accurate weighing, replace the batteries or connect

the scale to an AC power source as soon as possible.

SPECIFICATIONS

GENERAL

Health o meter’s Pro Plus

TM

Electronic Wheelchair Scale Model 2650KL uses highly

sophisticated microprocessor technology. Each precision instrument is designed to provide

accurate, reliable and repeatable weight measurements and features that make the weighing

process simple, fast and convenient.

The scale is set up to use motion-sensing weighing technology, to determine the actual weight

of a moving patient. The scale may be changed to measure live weight; see page 15 for

instructions on changing the scale setting.

The weight can be display in pounds (decimals, fractions of a lb or lb/oz) or in kilograms. The

scale features a platform-independent ramp for easy wheelchair access.

The unit can be operated using its AC adapter or by 6-D cell batteries (not included).

SCALE SPECIFICATIONS

Capacity and Resolution

1000 Lb x 0.2 lb / ¼ lb / 4 oz (450 kg x 0.1 kg)

Power Requirements

Adapter 120VAC - 6VDC - 60Hz or 6 x D size batteries

Environmental

Operating temperatures: 50°F to 95°F (10°C to 35°C)

Storage temperatures: 30°F to 125°F (0°C to 50°C)

Humidity: 85%

Physical Dimensions Platform

Length: 33” (82 cm)

Width: 36” (91 cm)

Height: 3” (7.5 cm)

Platform with Ramp

Length: 43” (109 cm)

Width: 56¼” (143 cm)

Height: 3” (7.5 cm)

Weight: 48.5 lb (22 kg)

3

ASSEMBLY INSTRUCTIONS

Parts List:

(1) Platform Assembly (plus 2 ramps) (1) Handle

(1) Display Assembly (4) Ramp Holder

(4) Rubber Feet Assemblies (1) Display Support

(1) AC Adapter (4) Screws

(1) LC Cable Connector (1) Power Cord

(2) Wheels

Tools required:

Phillips head screwdriver, Allen wrenches (included).

Remove each piece from the carton and unwrap packing material carefully to prevent scratching

the unit’s parts. It is recommended that assembly is performed by two people.

Figure 1. Assembly after Shipment

(refer to the Parts List on page 22 for details on parts)

1. Open the scale to operational position.

2. Connect the load cell cable connector to the load cell port on the rear of the display

assembly and insert and secure the cable into the center channel in the display.

NOTE

: Do not attach the Power Cord at this point.

3. Connect the load cell cable to the display unit see Figure 2.

NOTE

: The load cell cable should now be secured in the channel between the display

assembly and the display support.

4

Figure 2

Refer to the Parts List on page 22 for details on parts

4. Insert 4 screws into the display support and tighten.

5. Connect power cord to the power port in the display assembly and insert and

secure the cable into the exposed portion of the 2nd channel from the left in the

display.

6. Insert the power cord into the retaining slot. Align the rear cover tabs with the

slots on the rear of the display assembly. Secure with 4 screws.

7. Gently tip the scale. Screw in 4 plastic feet. Do not tighten.

8. Gently return the scale to the upright position.

WARNING

: Do not drop the scale on its feet. This could result in load cell damage.

9. Screw/unscrew the plastic feet to level the scale.

ASSEMBLY INSTRUCTIONS

5

ASSEMBLY INSTRUCTIONS

Figure 3. Folding the Ramp

1. Both ramps (left and right) can fold onto the platform.

2. The indicator is mounted onto one of the folded ramps by sliding the slots in the back of

the indicator into raised pins..

3. Lift the scale platform onto its side using the handle, and it is now able to be transported

on two wheels see Figure 4.

Figure 4. Folded Ramp

6

SET UP

Preparing the Scale for Use

1. Remove protective plastic film from keypad and display.

2. Place batteries in the battery holder (see “Replacing Batteries”).

3. Plug the scale’s AC adapter into the power source.

4. Press the ON/OFF button to turn the scale on. The display will show “Health o Meter

Pro Plus” and then ”000

Lb00oz”.

(a)

5. Place a weight [not to exceed 1000 Lb (450 Kg)] on the scale. The display should read

“WEIGHING“ until the weight calculation is complete and the weight is displayed.

6. Press the KG/LB button to select the weight mode (Lb/Kg).

(b)

*

7. Press the REWEIGH button; the scale should perform the weighing process again.

8. Remove the weight from the scale, the scale will return to zero and the display will read

“ZERO” on the left upper side of the screen along with

”000Lb00oz”.

9. Disconnect the scale’s AC adapter from the power source. The scale will shut off. Press

On/Off and the scale will switch to battery power.

NOTE

: If the set up procedure failed, refer to the troubleshooting instructions. If the

problem is not corrected, refer to qualified service personnel.

(a)

To adjust the display backlight and/or contrast, please refer to page 14.

(b)

To change the display mode in pounds to fractions or decimals, please refer to page 9.

Replacing Batteries

Figure 5. Replacing Batteries

(refer to the Parts List on page 22 for details on parts

1. Unplug the scale.

2. Remove the battery cover from the display assembly.

3. Disconnect battery holder cable connector from the scale-battery connector.

4. Carefully remove the battery holder by sliding it out the display assembly.

5. Replace the batteries with new ones.**

6. Carefully position the battery holder into the display assembly.

7. Plug the battery holder cable connector to the display cable connector.

8. Attach the cover to the display assembly and install the screw.

* To change the scale default units to kilograms, or to deactivate the LB/KG button,

please contact Technical Support at 1 800 638-3722 or +1 708 598-9100.

** We recommend the use of EVEREADY Energizer

®

e2

TM

batteries.

7

OPERATION INSTRUCTIONS

1. Press the ON/OFF button to turn the scale on.

2. Wait until ”000

Lb00oz” and “ZERO” on the left side of the display will appear.

3. If the wheelchair weight is known, enter the TARE value according to instructions in the

“Menu”, para 02. If the wheelchair weight is unknown, place the wheelchair only on the

platform; press REWEIGH. Enter the Automatic TARE by pressing the TARE button.

4. Move the wheelchair and patient onto the platform over the ramp until the front wheelchair

wheels are stopped by the platform guardrail. The display should read “WEIGHING“ until

the weight of the patient is displayed.

5. We recommend reweighing after the patient is sitting still on the wheelchair on the platform

by pressing the REWEIGH button.

6. Remove the wheelchair and patient from the scale by moving straight back off the ramp.

NOTE

: The scale will always default to the settings and units last used.

8

OPERATION INSTRUCTIONS

Figure 6. Keypad

ITEM DESCRIPTION FUNCTION

POWER Turns scale ON and OFF.

ZERO Zeros the scale prior to weighing.

HOLD/RELEASE

Holds the value of the weighed object on the display until

the button is pressed again to clear the value. Also used to

scroll down in the menu.

REWEIGH

Allows repeated weighing of the patient without stepping

off the scale.

KG/LB button

Toggles between kilograms or pounds. Also used to scroll

up in the menu.

MENU Press 10 seconds in order to enter the scale menu.

BMI

Prompts entry of data to calculate the patient’s Body Mass

Index (BMI).

PRINT Prints patient’s data (if printer is connected to the scale).

ID

Prompts entry of patient’s identification number (ID). This

ID will be stored with all the weighing made until is cleared

or a different ID is stored.

TARE

Prompts entry of TARE value that will be deducted from

the weight on the platform. Also releases tare weight

(returns display to zero).

EXIT

Reverts back one step when in the menu and data entry

modes.

ENTER Used to enter commands and values into the scale.

9

OPERATION INSTRUCTIONS

MENU

In the menu screen the user can set preferences and/or instruct the scale how to handle stored

data. The menu can be navigated using the up and down keys (cd) or by entering the

associated menu position number with the keypad. The menu has a “roll-over” way of working:

when the user scrolls to the bottom of the menu and presses the down button, it will return to the

top of the menu.

Figure 7. Main Menu

01 WEIGHT DISPLAY MODE

(only applies to pound values, NOT the metric values)

The user can set the screen display value in either fraction of pound (¼, ½ or ¾ lb), in pounds

and ounces (resolution of 4 ounces) or in decimals (resolution of 0.2 lb). When kg is selected as

the units of use, these settings have no effect. The mode that is selected is used through all the

screens.

Figure 8. Weight Display Mode

10

OPERATION INSTRUCTIONS

02 TARE WEIGHT

NOTE: Due to the scale’s sensitivity, we recommend using the REWEIGH function prior

to setting the TARE weight, in order to eliminate any operator interference with the item

to be tared out.

There are two ways to manually enter a tare weight (such as the weight of a wheelchair, shoes,

etc): press MENU (1) and select option 02-Tare Weight or press TARE (9). If there is no weight

on the scale platform (value displayed is zero and there is no tare) and the user presses the

TARE button (9), the Tare Weight window appears and prompts the user to enter the TARE

value and to press ENTER. NOTE: The tare weight must be entered using the following

increments: 4oz, 0.2lb, ¼lb. The value entered will display in minus (-). After the TARE has been

entered, the scale goes back to normal operation. This TARE value is stored in memory until

changed or cleared.

Important: The TARE weight cannot exceed 200 lb.

TARE display

indicates the weight

that has been tared

out

The number that is to be changed will

flash and will move from the left to the

right after the appropriate number was

entered or by using the c key (left)

and the d key (right).

Figure 9. Tare Weight

Automatic Tare

The user can set a tare weight by pressing the TARE button (9) while there is a weight on the

scale platform. The display will come to zero and TARE will be displayed to indicate there is a

tare value in the memory (as displayed in Figure 9 above).

Removing the Tare

Additional pressing of the TARE button will delete the tare value from memory, TARE will

disappear from the display and the scale will resume normal operation.

03 DATA MANAGEMENT

The scale manages patient data including patient ID, weight, height, tare and BMI. The value is

stored in memory or transferred to PC. This function is performed by opening a new data file.

OPENING A NEW DATA FILE:

1. Press the ID button (7).

2. Using the keypad, type in the identification number.

3. Press ENTER.

This scale will also calculate Body Mass Index (BMI).

CALCULATING BMI:

1. Place the patient on the scale platform.

2. Press the BMI button (2).

11

OPERATION INSTRUCTIONS

3. The scale will prompt you to enter the patient’s height. Use the keypad to enter the height in

1/4" (1=1/4, 2=1/2, 3=3/4) or 1 cm increments (use inches for weight in lb, cm for kg). Press

ENTER.

4. Display will read the patient’s BMI.

The scale offers you two options to manage your information: to transfer/download the values or

to store them. The first option automatically downloads (transfers) the value to your PC. The

second option stores the value in memory. The maximum capacity of the scale is 270 files of

different data.

01 Auto Download

Automatic Download is the default option and will transfer the

value to the PC as soon as the patient steps off the scale or

when the user presses the HOLD/RELEASE button if it was

kept in “HOLD”. If no PC is connected, the value is not

transferred and not stored and will be lost after the load is

removed from the scale.

02 Store in memory

The value is stored in memory

for later download to PC.

If the memory is close to full

the user will be warned and

given the option to transfer all

values to the PC or to clear

the memory of all values.

03 Do not store data

All the data will be cleared.

12

OPERATION INSTRUCTIONS

04 Transfer now

All the values stored in memory are transferred to the PC and

the scale memory is cleared of all values. If the transfer was

unsuccessful, the values are kept in memory until

successfully transferred or cleared.

05 Clear memory

All the values stored in memory will be cleared.

04 SCALE SETTINGS

01 Auto Hold Time

The user can determine how long to display the weight

reading once it is determined, regardless of whether the

patient remains on the platform. The scale defaults to no Auto

Hold Time. The maximum setting is 20 seconds Hold Time.

02 Sleep Time

The user can set the time elapsed before the scale goes into

the sleep mode. The default is 1 minute. When the scale

goes into sleep mode, STANDBY is displayed on the screen.

13

OPERATION INSTRUCTIONS

03 Auto Off Time

The user can determine how long the scale will operate

before turning off automatically due to inactivity. Default

time is 10 minutes. If the value is set to zero, the auto off

function is disabled.

04 Tone Volume

There is an option to adjust the beeping tone of the scale.

This tone should sound when the scale has determined

the weight on the platform, when a key is pressed, after

the scale is turned on, at the end of self-test, or in the case

of fault or warning.

Use the c and d keys on the keypad to adjust the

volume.

Whenever the user presses the key to change a volume, a

beep will sound to indicate the set volume level.

05 Display Date and Time

This option will turn on or

turn off the date and time

display.

14

OPERATION INSTRUCTIONS

06 Display Backlight

The user can set the brightness of the backlight.

07 Display Contrast

The user can set the brightness of the LCD.

08 Live Weight

By selecting “Yes” the user can set the Live Weight mode

to deactivate the motion-sensing mode. In the Live Weight

mode the weight displayed will fluctuate with the patient’s

movement; the scale will not lock on quickly to the weight

as is the case in the motion-sensing mode.

Press the REWEIGH button to operate the motion-sensing

mode and to determine the correct weight on the screen.

To revert back to motion-sensing mode, change the Live

Weight setting to “No”.

05 SYSTEM SETTINGS

01 Set Time & Date

The user can set the time and date using the keypad.

To set the time move between hours, minutes and

seconds using the up and down keys cd and enter the

values on the keypad. To jump to the AM/PM line press

the ENTER button once.

15

OPERATION INSTRUCTIONS

Set the date using the up and down keys cd and enter the

values on the keypad.

02 About

This screen displays the software version of the scale.

06 SYSTEM TEST

01 Battery Test

The scale will display the estimated amount of battery life

remaining until the batteries will have to be replaced.

NOTE: In order to complete the battery test, the scale must be

powered by batteries only. Unplug the scale from AC power

source prior to battery test.

02 USB Connection

The scale will test the connection to the PC and will display a

message “Connection is OK” or ”NO Connection”.

If “NO Connection” is displayed, check your USB connections

on the scale and on your PC and retest the connection. Refer

to qualified service personnel if problem persists.

16

OPERATION INSTRUCTIONS

03 UI Test

The scale has a diagnostic routine where it tests the User

Interface (UI) hardware functionality (LCD, keypad). In order to

do this the user has to press all the keys according to the

messages displayed on the screen.

If the requested command was not received or wrong button

was pressed, the following message will be displayed.

If after 10 seconds the requested command was not received,

the following message will be displayed. If “UI Error Failure” is

displayed, refer to qualified service personnel.

07 USER SETTINGS

01 Retain Entered Values

This option allows the user to use the same values for ID,

height and TARE between weighing. If this option is disabled,

the user has to re-enter these values for each reading. If the

values are not entered, only the weight is stored.

NOTE: These values cannot be retained by ID number.

17

OPERATION INSTRUCTIONS

02 Disp Height & ID

When the user selects to

display the height and ID of the

user, it will be displayed at the

bottom of the screen. We

recommend the use of this

function to ensure that the

patient’s correct ID and height

have been entered.

03 Prompt For Height

When this option is activated,

the user will be asked to enter

the patient’s height after every

weighing.

04 Prompt For ID

When this option is activated,

the user will be asked to enter

the patient’s ID number after

every weighing.

18

MAINTENANCE

GENERAL

This section provides instructions for maintenance, cleaning, troubleshooting and operator

replaceable parts for the Pro Plus

TM

Electronic Wheelchair Scale Model 2650KL. Maintenance

operations other than those described in this section should be performed by qualified service

personnel.

MAINTENANCE

Before first use and after periods of non-use, check the scale for proper operation and function.

If the scale does not operate correctly, refer to qualified service personnel.

1. Check overall appearance of the total scale for any obvious damage, wear and tear.

2. Inspect AC adapter for cord cracking or fraying or for broken or bent prongs.

CLEANING

Proper care and cleaning is essential to ensure a long life of accurate and effective operation.

Disconnect the scale from the AC power source.

1. Clean all external surfaces with a clean damp cloth or tissue. Mild soap and water solution

may be used. Dry with a clean soft cloth.

2. Do not immerse the scale into cleaning or other liquid solution.

3. Do not use Isopropyl Alcohol or other solutions to clean the display surface.

19

TROUBLESHOOTING

Refer to the following instructions to check and correct any failure before contacting service

personnel.

SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION

Scale does not turn on 1. Dead Battery

2. Faulty electrical outlet

3. Bad power supply

1. Replace batteries

2. Use a different outlet

3. Replace adapter

Questionable weight or

the scale does not zero

1. External object

interfering with the scale

1. Remove interfering object

from the scale

2. The display did not show

”0.0” before weighing

2. Ask the patient to get off

the scale, zero the scale

and begin weighing

process again

3. Scale is not placed on a

level floor

3. Place the scale on a level

floor and begin weighing

process again

4. Scale is out of calibration 4. Check weight with known

weight value

5. Improper Tare 5. Place the item to be tared

on the scale. Press

REWEIGH. Once the

weight of the item is

displayed, press TARE.

Place the patient and the

tared item back on the

scale. Press REWEIGH

again.

Weighing is performed but

the display shows “weigh”

and “reweigh” every few

seconds; the weighing

process takes too long and

no weight is displayed.

The patient is not sitting still Ask the patient to be still or

you can change to live weight

setting

The display shows

“Overload” message

The load on the scale

exceeds the capacity

(1000 lbs/450 kgs)

Remove the excess weight

and use the scale according to

its limits

The display shows

“LOW BAT” message

The batteries are empty Replace batteries according to

instructions

The display shows

“Load Cell Error” message

There is a problem with one

or more load cells or the load

cell cable is disconnected.

Check load cell cable

connection at the display and

platform assembly ports. If the

problem is not corrected, refer

to qualified service personnel

to replace the defective load

cell

La page charge ...

Health O Meter Pro Plus 2650KL Manuel utilisateur

Ce manuel convient également à

Health O Meter Pro Plus 2650KL Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents