Troy-Bilt 31AH97P7711 Parts Manual

Troy-Bilt
Marque
Troy-Bilt
Modèle
31AH97P7711
Taper
Parts Manual

Ce manuel convient également à

TROY-BILT LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Printed In USA
Illustrated Parts Manual
Two Stage Snow Thrower — Polar Blast 4510
Form No. 769-07038
(June 03, 2011)
0637 Black
0709 Dark Green (Bolens, Yard-Man)
0662 Oyster Gray (MTD Gold)
0638 Red (Yard Machines, Huskee, Troy-Bilt, MTD)
0691 Black Jack (MTD Gold, MasterCut)
0674 Yellow (Yard-Man)
0650 Metallic Red (White Outdoor)
0629 Silver Flake (MTD Platinum)
04038 Day Orange (Daedong)
04033 Flint Mica (Troy-Bilt XP)
Thank you for purchasing an MTD Snow Thrower. It was carefully
engineered to provide excellent performance when properly
operated and maintained.
All information in this manual is relative to the most recent
product information available at the time of printing. Please be
aware that this Illustrated Part’s Manual may cover a range of
product specifications for various models.
Components listed and/or illustrated in this manual may not be
applicable to all models. We reserve the right to change product
specifications, designs and equipment without notice and
without incurring obligation.
Throughout this manual, all references to right (RH) and left (LH)
are observed from the operating position.
To The Owner
2
Augers, Auger Housing & Gearbox ........................ 4
Engine Model 490-SUA ..........................................12
Handles, Handle Panel & Discharge Chute ........... 6
Label Map ...............................................................11
Snow Thrower Drive System................................... 8
Table of Contents
Record Product Information
To ease in ordering replacement parts, please locate the model
plate on the equipment and record the information in the
provided area to the right. You can locate the model plate by
standing at the operator’s position and looking down at the rear
of the deck.
Model NuMber
Serial NuMber
Painted Parts
When ordering painted service parts, a four digit color suffix must be added to the part number (e.g. 783-XXXXX-0637).
Please refer to the table below for current color codes:
Thank You
3
This page left intentionally blank.
4
Augers, Auger Housing, and Gearbox
37
1
14
30
4
3
16
2
46
11
34
5
52
62
53
68
69
68
69
54
61
66
67
67
55
59
60
57
63
64
64
50
63
65
58
56
44
45
25
15
43
43
13
36
9
33
23
14
28
42
48
51
51
51
51
47
50
32
27
6
7
11
49
39
12
41
38
12
40
8
21
21
24
26
26
19
10
7
7
11
31
22
35
18
11
17
17
29
11
11
6
20
70
71
5
Ref. Part Number Description
1. 918-0281A Bracket Assembly, Auger Brake
2. 684-0090B Impeller , 16”
3. 731-2635 Clip, Mounting
4. 931-2643 Tool, Clean-out
5. 710-0376 Screw, Hex Cap, 5/16-18 x 1.0 Gr5
6. 710-04484 Screw, 5/16-18 x .750
7. 710-0451 Screw, Carriage, 5/16-18 x .75
8. 710-04606A Screw w/Stud, 5/16-18 x .4300
9. 710-1245B Screw, Hex Cap Lock, 5/16-24, 875
10. 911- 0677 Ferrule
11. 712-04063 Nut, Hex Flange Lock, 5/16-18
12. 712-04065 Nut, Hex Flange Lock, 3/8-16
13. 914 -0135 Key, Woodru, 1/4 x 3/4
14. 714-04040 Pin, Bow-tie Cotter
15. 915 - 0118 Pin, Spiral, 5/16 x 1.75
16. 725- 0157 Cable Tie
17. 926 -04012 Nut, Push
18. 731-1696B Adapter, Chute, 6”
19. 732-0858 Spring, Extension
20. 936- 0159 Washer, Flat, .349 x .879 .063
21. 736 - 0174 Washer, Wave, .625 x .885 x .015
22. 736-0188 Washer, Bell., .78 x 1.49 x .06
23. 736-0505 Washer, Flat, .34 x 1.5 x .15 Ht.
24. 936-3008 Washer, .344 x .75 x .12
25. 736-3046A Washer, 1.01 x 1.86 x .06
26. 938-0281 Screw, Shoulder, .625 x .17
27. 738- 04155 Pin, Shear, .25 x 1.75
28. 741- 0192 Bearing, Flange w/Flats
29. 941- 04024 Bearing, Self Aligning
30. 747-0980A Rod, Auger Idler
31. 748-04067A Adapter, Pulley w/Pins
32. 950-04020 Spacer, 1.004 x 1.375 x .25
33. 756-04244A Pulley, Auger Drive, 10.0
34. 790-00264A Bracket, Gear Box Support
35. 05244B Housing, Bearing
36. 710-3008 Screw, 5/16-18 x .75 GR5
Ref. Part Number Description
37. 749- 04485 Tube, Support , LH
38. 929-0071A Extension Cord, 110V
39. 710-0389 Screw, Carriage, 3/8-16 x .75
40. 710-3168 Screw, Carriage, 3/8-16 x 1.00
41. 784-5697 Skid Shoe
42. 784-0315A Housing, Bearing
43. 918-04514 Gear Box Assembly
44. 684-04151 Spiral Assembly, LH
45. 684 - 04152 Spiral Assembly, RH
46. 684-04223 Housing, Auger - 45”
47. 731-05163 Spacer, 1.50 x 1.00 x 1.00
48. 738- 04159 Axle, Spiral
49. 790-00280 Shave Plate, 45”
50. 937-3000 Grease Fitting, 3/16
51. 741- 0494 Flange Bushing
52. 918-0246 Housing Assembly, Auger, RH
53. 918-0435 Housing Assembly, Auger, LH
54. 710 -1260A Screw, LD, 5/16-18 x .750
55. 711-04714 Auger Drive Shaft
56. 914- 0126 Key, Hi Pro, 3/16 x 3/4
57. 914- 0135 Key, 1/4 x 3/4 Dia.
58. 716 - 0111 External Retainer Ring
59. 917-0299 Gear, Worm
60. 917-1425 Gear, Worm, LH
61. 921-0145 Seal, Oil
62. 721-0325 Plug
63. 936-0266 Wash, Flat, 1.52ID x 2.0 OD
64. 936-0291 Wash, Flat, .88 ID x .38 OD
65. 738-0275 Worm Gear Shaft
66. 741- 0184 Bearing, Thrust
67. 941- 0217 Sleeve
68. 921-0146 Oil Seal
69. 741-0670 Flange Bearing
70. 712-3007 Jam Nut, 5/16-18
71. 749-04489 Tube, Support, RH
Augers, Auger Housing, and Gearbox
6
Handles, Handle Panel & Discharge Chute
72
30
33
22
44
21
35
3
19
37
73
55
58
62
68
64
22
61
63
71
53
74
2
66
11
67
52
69
59
37
27
50
12
42
46
47
5
78
80
79
51
49
24
32
40
31
25
31
41
32
23
4
1
26
70
57
13
17
54
65
60
65
9
15
6
14
12
10
16
18
11
8
6
75
56
43
48
45
7
20
77
34
38
36
28
29
39
76
81
62
7
Handles, Handle Panel & Discharge Chute
Ref.
Part Number Description
1. 716-04036 E-Ring
2. 725-0157 Cable Tie
3. 731-04913 Trigger Lock
4. 738- 04126 Pin, 3/16
5. 984-04230 Chute Control Assembly
6. 710-0276 Carriage Screw, 5/16-18 x 1.0
7. 710 - 04187 Screw, 1/4-15 x .50
8. 710-0458 Carriage Screw, 5/16-18 x 1.75
9. 710-0597 Hex Screw 1/4-20 x 1.0
10. 710-0895 Screw, 1/4-15 x .750
11. 712-04063 Flange Lock Nut 5/16-18
12. 712-04064 Flange Lock Nut 1/4-20
13. 731-0846C Upper Chute, 6.0
14. 731-0851A Chute Flange Keeper
15. 731-0903E Lower Chute
16. 731-1313C Cbl. Guide, Chute Tilt
17. 936-0231 Flat Wash, .344 x 1.125 x .12
18. 784-5594 Cable Bracket
19. 631-04133A Handle Assembly, LH
20. 631-04134B Handle Assembly, RH
21. 931-05332A Handle Panel
22. 646 -0012 Cable Ass’y, Auger/Drive
23. 684- 04105B Engagement Handle, LH
24. 684- 04106B Engagement Handle, RH
25. 684-04250 Clutch Lock Rod Assembly
26. 710-04326 Screw, #8-16 x .50
27. 710-04586 Screw, 1/4-20 x 1.625
28. 710-0599 Hex Screw, 1/4-20 x .5
29.
710-0837 Screw, #10-16 x .625
30.
710-1233 Screw, #10-24 x 1.375
31.
710-3069 Screw, 1/4-20 x .50
32.
712-04081A Nut, Hex, 1/4-20
33. 720-04039 Shift Knob
34. 777X41805 Lens Lable
35. 725-04393 Heated Grip Switch
36. 725-05148 Wire Harness
37. 725-05149 Heated Grip
38. 725-1629 Lamp, 12.8V
39. 925-1649 Light Socket
40. 731-04894D Lock Plate
41. 731-04896B Clutch Lock Cam
Ref.
Part Number Description
42. 732-0193 Compression Spring
43. 732- 04219C Clutch Lock Spring
44. 732-04238 Torsion Spring, .8156 ID x .3038
45. 935-0199A Rubber Bumper
46. 936-0267 Flat Washer, .385 x .87 x .06
47. 738- 04125 Screw, Shldr., .374 x 1.05
48. 738-04348 Screw, Shldr., .437 x 1.345
49. 746-04341 Clutch Cable
50. 790-00248C Panel Bracket
51. 790-00281B Shift Lever
52. 684-04308A Chute Crank Assembly
53. 684-04350 Joint Block Assembly
54. 710-04682 Hex Screw, 3/8-16 x 2.00
55. 710-0572 Carriage Screw, 5/16-18 x 2.5
56. 710 -3118 Screw, Hex, 3/8-16 x 1.00
57. 912-3010 Nut, Hex, 5/16-18
58. 914-0101 Internal Cotter Pin
59. 914-0104 Internal Cotter Pin
60.
715- 04095 Spring Pin, .156 dia. x .875 Lg.
61.
720-0201A Knob, Crank
62.
920-0284 Knob, Wing Nut, 5/16-18
63. 926-0100 Push Cap, 3/8
64. 735-0234 Rubber Grommet
65.
736-0105 Bell Wash, .375 x .87 x .063
66.
936- 0159 Flat Washer, .349 x .879 x .063
67.
936-0185 Flat Wash, .375 x .738 x .063
68. 736-0242 Wash, Bell, .34 x .872 x .06
69.
941-0475 Plastic Bushing, .38 ID
70. 747-04747 Eye Bolt, .70 Dia.
71. 747-04925A Chute Rod, .375 Dia. x 29.72
72. 749-04674 Handle, Upper, RH
73. 749- 04675 Handle, Upper, LH
74. 749-0991 Handle, Lower
75. 790-00329 Chute Crank Bracket
76. 715-0150 Roll Pin, 3/16 Dia. x 1.100
77. 731-05319 Lens
78. 710-04022 Hex Screw, M8-1.25
79. 732-04677 Cable Guide
80. 936-0264 Flat Washer, .330 x .630 x .0635
81. 936-0159 Washer, Flat, .349 x .879
8
Snow Thrower Drive System
16
24
31
31
52
40
20
51
39
13
14
67
103
43
71
50
17
12
49
1
12
25
57
22
72
34
29
57
11
44
64
33
11
47
66
41
21
63
18
2
36
62
45
4
60
37
61
37
19
19
6
7
62
3
54
54
35
50
32
31
65
102
42
12
10
55
16
70
53
58
28
30
27
56
59
48
23
38
46
69
22
33
68
26
26
5
51
16
96
81
75
87
65
82
97
93
77
79
88
73
91
85
101
80
78
92
95
94
99
84
76
86
90
100
74
83
98
22
8
15
105
89
108
109
106
107
9
104
53
9
Continued on following page
Ref.
No.
Part No. Description
1. 05244B Housing, Bearing
2. 618-0279P Dogg, Steering Drive, LH
3. 618-0280P Dogg, Steering Drive, RH
4. 918-0282E Shaft Assembly, Steering
5. 918- 04178 Assembly, Friction Wheel
718-04034 Wheel, Friction, Bonded
710-0896 Screw, Hex Wash
6. 68 4 - 0118B Bracket, Auger Actuator
7. 68 4 - 0119B Bracket, Drive Actuator
8. 710-0751 Hex Head Screw, 1/4-20
9. 684-04229 Rod Assembly, Shift
10. 684- 04212 Brkt, Friction Drive Suprt.
11. 684-04235 Sprocket, 32T
12. 710-04484 TT Screw, 5/16-18 x .750
13. 710-0538 Screw, Hex Cap Lock,
14. 710-0599 Screw, Hex, 1/4-20 x .50
15. 712- 04063 Flange Lock Nut 5/16-18
16. 710 -1652 Screw, Hex Wash.
17. 710-3001 Screw, Hex Cap, 3/8-16
18. 911- 0 4279 Shaft, Hex Drive
19. 711- 0 4605 Shaft, Actuator
20. 912- 0116 Nut, Hex Insert Jam Lock
21. 912- 0138 Nut, Hex, 1/4-28 GR5
22. 712- 04065 Nut, Hx Flnge Insert Lk
23. 912- 0413 Nut, Hx Insert Jam Lk
24. 712-0717 Nut, Insert 3/8-16
25. 713- 0284 Chain, Endless, #41 x 36L
26. 713-0286 Chain, #420 x 40L
27. 913-04015 Sprocket, #41 x 10T
28. 914-0104 Pin, Internal Cotter
29. 914- 0135 Key, Woodru
30. 914-0388 Key, Hi-Pro, 3/16 x 5/8
31. 916-0104 E-Ring
32. 716- 0136 Ring, Retaining
33. 716-04048 Ring, Retainer
34. 917-0302 Plate, Drive
35. 726-0221 Speed Nut, .500
36. 932-0121 Spring, Extension
37. 932-0209 Spring, Extension
38. 936 -0158 Washer, Lock, 5/8
39. 736-0242 Wsh, Bell., .34 x .872 x .06
Ref.
No.
Part No. Description
40. 936-0864 Wash, .375 x .812 x .060
41. 936-0329 Washer, Lock, 1/4
42. 711- 0 4 615 Pin, Clevis
43. 914-0149B Pin, Internal Cotter
44. 937-3000 Fitting, Lube, 3/16 Drive
45. 738-0143 Screw, Shldr., .498 x .34
46. 738-0279 Spindle, Drive Plate
47. 738-0924A Screw, Hex Shldr., 1/4-28
48. 741-0163A Ass’y, Bearing/Housing
49. 941-04025 Bearing, Self Aligning
50. 741-04108 Bearing, Hex Flange
51. 941- 0563 Bearing, Ball
52. 741-0747 Bush, Flg, .5625 ID x 1.375 x .4375
53. 741-0748 Bush, Flg, .5 ID x .627 OD
54. 946- 04337A Cable, Steering
55. 946-0951A Cable, Auger Idler
56. 747-0973 Rod, Drive Clutch
57. 750-04703 Spacer, 1.01 x 1.50 x .93
58. 750 -04717 Spacer, .49 x 7.865
59. 750-04718 Spacer, .49 x 3.545
60. 750-05342 Spacer, .566 x .87 x .190
61. 750-05343 Spacer, .566 x .87 x 1.25
62. 750-0903B Spcr., .514 x .632 x 2.44
63. 950-0997 Spacer, .675 x 1.0 x .23
64. 750-1302B Spcr, .6725 x 1.125 x 2.48
65. 756-0344 Pulley, Drive
66. 756-0625 Roller, Cable
67. 784-0404 Retainer Bracket
68. 784-0406A Bracket, Frame Support
69. 784-0407 Bracket, Axle Support
70. 790-00257 Cover, Upper Frame
71. 790-00259 Cover, Lower Frame
72. 790-00349 Trans Frame
73. 684- 04169 Idler Pulley Assembly
74. 710-0627 Screw, Hex 5/16-24 x .75
75. 710-0191 Screw, Hex 3/8-24 x 1.25
76. 710-0607 Screw, Hx Wash Hd Tapp
77. 710-0624 Screw, Hex Cap, 5/16-24 x 1.50
78. 710-0654A Screw, 3/8-16 x 1.00
79. 710-0809 Screw, 1/4-20 x 1.25
80. 738-04439 Screw, Shldr., .500 x .145
Snow Thrower Drive System
10
Ref.
No.
Part No. Description
81. 710-0347 Screw, Hex Cap, 3/8-16 x 1.75
82. 714 - 0118 Key, Square, 1/4 x 1.5
83. 926- 04012 Nut, Push
84. 931-2531 Cover, Belt
85. 732-04308A Torsion Spring, .850 dia. x .333 lg.
86. 936 - 0119 Washer, Lock, 5/16
87. 736-0247 Washer, Flat, .406 x 1.25
88. 736-3092 Washer, Flat, .265 x 1.0 x .030
89. 712- 04064 Flange Lock Nut 1/4-20
90. 74 8- 0 4112B Shldr. Spacer, .3175 x .500 x .094
91. 750-04571 Shldr. Spacer, .260 x .785 x .538
92. 750-04821 Shoulder Spacer, .340 x 1.00
93. 750-05316 Spacer, 1.02 x 1.63 x .1425
94. 954- 04194A V-Belt, 4L x 44.60
95. 954-04202 V Belt, 3/8 x 36.68
96. 756-04224 Pulley, Flat Idler, 2.75 OD
97. 756 -0241B Double Pulley, 3.25 x 2.75
98. 784-0385D Bracket, Auger Idler
99. 790- 00167A Belt Keeper Bracket
100. 790-00208C Idler Drive Wheel Bracket
101. 790-00254A Belt Cover Bracket
102. 634-0225A Wheel Ass’y. - LH
634-0226A Wheel Ass’y. - RH
734-2031 Tire
73 4 -1124A Rim Assembly
934-0255 Valve
103. 711- 0 46 06A Axle, Wheel, 45”
104. 732-04385 Torsion Spring, .750 I.D. x .968 Lg.
105. 936-3015 Flat Washer, .469 x .875 x .105
106. 738-04184A Shoulder Screw, .368 x .113
107. 750 -04719 Spacer, .515 ID x .750 OD x .220
108. 790 -00217A Speed Selector Pivot Bracket
109. 790-00218A Speed Selector Shift Bracket
Snow Thrower Drive System (Continued)
11
Label Map
OPERATORS VIEW
777S32280
777I23440
777I23041
DANGER
NEVER PUT HAND IN CHUTE. CONTACT WITH
ROTATING PARTS CAN AMPUTATE FINGERS
AND HANDS.
SHUT OFF ENGINE AND WAIT UNTIL ALL
MOVING PA RTS HAVE STOPPED BEFORE
UNCLOGGING.
USE CLEAN-OUT TOOL OR WOODEN
STICK TO
UNCLOG DISCHARGE CHUTE.
1.
2.
3.
4.
5.
KEEP AWAY FROM ROTATING IMPELLER
AND AUGER. CONTACT
WITH IMPELLER OR
AUGER CAN AMPUTATE HANDS AND FEET
.
USE CLEAN-OUT TOOL TO UNCLOG DISCHARGE CHUTE.
DISENGAGE CLUTCH LEVERS, STOP ENGINE,
AND REMAIN BEHIND
HANDLES UNTIL ALL
MOVING PARTS HAVE STOPPED BEFORE
UNCLOGGING OR SERVICING MACHINE.
TO AVOID THROWN OBJECTS INJURIES,
NEVER DIRECT
DISCHARGE AT BYSTANDERS.
USE EXTRA CAUTION WHEN
OPERATING ON
GRAVEL SURFACES.
READ OPERATOR'S MANUAL.
DANGER
CLEAN-OUT TOOL
DANGER
AVOID INJURY FROM
ROTATING AUGER -
KEEP HANDS, FEET
AND CLOTHING AWAY.
777S32636
Front Top Of Auger Housing
Cut Foot Pictorial Facing
Away From Operator
777I22363
Facing Operator
777D16463
777D14940
777D13679
Clearing Width
45
4510
P
OL AR
B LAST
lectric Start
gnireetSnruTn‘hcuoT
lortnoCetuhCetomeR
777D14861
On Engine Spinner
OHV 420cc
777D15826
Front Of Engine Facing Away From
Operator Below Yellow Oil Cap, Place
On Lower Steel Part Of Fuel Tank
12
490-SUA Muffler & Controls
Ref. Part Number Description
1 710 -04915 Bolt M6×12
2 951-11339 Muer Shield
3 710 -04915 Bolt M6×12
4 951-10757 Throttle Control Knob
5 951-11595 Control Panel
6 951-10637 Key Switch Base
7 731-05632 Key
9 951-11302 Choke Knob
10 710-04914 Bolt M6×10
11 951-11181 Exhaust Pipe Shield
12 951-11321 Carb Isolator Bracket
13 710-04968 Bolt M6×16
14 951-11338 Muer Assembly
15 712- 04219 Nut, M8
1
2
3
10
10
10
11
3
3
3
13
12
14
15
3
9
3
7
6
4
5
3
13
490-SUA Carburetor
Ref.
Part Number Description
130 710-05392 Stud M6-8×100
131 710-05056 Stud M6-8×118
132 951-11315 Carburetor Insulator Gasket
133 951-11353 Carburetor Insulator
134 951-11354 Carburetor Gasket
135 951-11352A Carburetor Assembly
136 951-10639A Primer Assembly
137 951-11824 Primer Bulb
139 951-1130 4 Heater Box
140 951-11192 Choke Control
141 736-04477 Lock Washer
142 712- 04212 Nut M6
a N/A Choke Shaft
b N/A Lock Washer
c N/A Screw M3×5
d N/A Choke Plate
e N/A Throttle Shaft
f N/A Throttle Plate
g N/A Lock Plate
h N/A Idle Jet Assembly
Ref.
Part Number Description
i N/A Idle Speed Adjusting Screw
j N/A Mixture Screw
k 751-11991 Primer Hose
l 951-11906 Hose Clamp
m N/A Carburetor Body
n N/A Float Pin
o N/A Emulsion Tube
p N/A Needle Valve
q N/A Main Jet
r N/A Needle Valve Spring
s N/A Float
t 951-11970 Fuel Bowl Gasket
u N/A Fuel Bowl
v 951-1134 8 Fuel Bowl Gasket
w 710-04945 Fuel Bowl Mounting Bolt
x 951-113 49 Fuel Drain Plug Gasket
y 710-04938 Fuel Drain Plug
951-11355A Carburetor Kit - Major
(Incl.g,h,I,n,o,p,q,r,s,t,v,x)
130
131
132
133
134
135
139
140
141
141
142
142
137
136
14
490-SUA Crankcase
76
75
74
73
70
71
69
66
66
66
66
66
66
66
65
67
62
63
61
63
64
62
58
50
57
59
60
144
145
56
55
49
52
51
53
50
54
146
80
79
78
81
77
45
43
42
44
43
41
15
490-SUA Crankcase
Ref.
Part Number Description
41 951-11951 Connecting Rod Assembly
42 951-12092 Piston
43 951-11953 Piston Pin Snap Ring
44 951-11954 Piston Pin
45 951-12593 Piston Ring Set
49 951-11956 Governor Gear/Shaft Assembly
50 951-11373 Radial Ball Bearing, 6202-P6
51 736-04453 Washer 8×20×0.8
52 714-04077 Cotter Pin
53 951-11958 Governor Seal
54 951-11365 Governor Arm Shaft
55 951-11358 Crankshaft Kit
(Incl.50,55,56,65,81)
56 951-10307 Woodru Key
57 715-04102 Dowel Pin 9×12
58 715- 04092 Dowel Pin 7×14
59 951-11959 Camshaft Assy.
60 951-11376 Crankcase Cover Gasket
61 736-04476 Washer 16×24×0.5
62 951-11960 O-Ring 16×3
63 951-11345 Oil Filler Plug Assembly
64 951-113 40 Crankcase Cover Kit
(Incl.50,60,61,64-68)
65 951-11375 Oil Seal, 30×46×8
66 710-04971 Bolt M8×38
67 710-04972 Bolt M8×45
Ref.
Part Number Description
68 710-05052 Bolt M8×35
69 710-04968 Bolt M6×16
70 951-11320 Dipstick Clamp
71 710-04966 Bolt M6×8
73 951-11381 Oil Fill Tube O-Ring
74 951-11972 Oil Fill Tube Assembly
75 951-11904 Dipstick O-Ring
76 951-11971A Dipstick Assembly
77 951-11359A Crankcase Kit
(Incl.50,53,77,81)
78 951-11350 Oil Drain Pipe Assy.
79 736-04440 Washer 10×16×1.5
80 710-04906 Oil Drain Plug
81 951-1149 9 Oil Seal 35×52×7
143 951-12095 Balance Shaft Assembly
144 951-11969 Bearing, 6207-P6
146 951-10641 Oil Drain Assembly
952Z490-SUA Complete Engine
951-11362 Gasket Kit - Complete
(Incl.53,60,65,79,81,106,
108,125,132-134)
951-1136 0A Short Block Assembly
(Incl.41-45,49-61,63-68,77-81,
102,105,106,108,111,112,
125,132,133,143)
16
490-SUA Fuel Tank & Mounting
Ref. Part Number Description
16 951-12532 Fuel Cap Assembly
17 951-11933 Fuel Level Indicator
18 710-04970 Bolt M8×20
19 750 -05312 BushⅠ, Gas Tank
20 750 -05313 Bush Ⅰ, Gas Tank
21 951-11201 Fuel Tank Assembly
22 951-11319 Left Trim Plate
23 951-11318 Rear Mainting Bracket Assy.
24 951-11351 Right Trim Plate
25 710-04968 Bolt M6×16
26 736-04452 Bush
27 951-11336 Fuel Line Kit
Ref. Part Number Description
28 951-1170 0 Fuel Hose Clamp
29 710-04921 Bolt M8×14
30 951-11182 Gas Tank Support Bracket
31 712- 04219 Nut M8
33 712-04212 Nut M6
34 710-04908 Governor Arm Bolt
35 951-11307 Governor Arm
36 951-113 06 Governor Spring
37 951-11203 Throttle Linkage Spring
38 951-113 09 Throttle Linkage
39 951-11311 Primer Bracket
40 710 -04915 Bolt M6×12
16
17
18
19
18
19
21
27
28
28
25
26
23
25
26
24
25
26
29
29
31
29
29
30
38
37
36
35
33
34
26
25
39
40
22
20
20
18
18
17
490-SUA Starter & Blower Housing
Ref.
Part Number Description
46 710-04965 Bolt M4×55
47 951-11196 Startup Electromotor
48 710-04967 Bolt M8×55
82 951-11305 Ignition Coil Assembly
83 710-05350 Ignition Coil Bolt
84 951-11961 Coil Assy., Charge
85 710-04969 Bolt M6×30
86 710-04966 Bolt M6×8
87 951-11186 Alternator Wire Clamp Brkt
88 951-11312 Flywheel
Ref.
Part Number Description
89 951-11313 Fan, Cooling
90 951-11314 Pulley, Starter
91 712- 04220 Nut, Special, M16×1.5
92 710-04968 Bolt M6×16
93 710 -04915 Bolt M6×12
95 951-11211 Blower Housing
96 951-11310 Recoil Starter
97 736-04455 Gasket 6
98 710- 04974 Bolt M6×10
98
97
97
98
98
97
93
93
96
93
95
93
92
91
90
89
88
85
85
86
87
84
83
83
82
48
48
47
48
48
18
490-SUA Cylinder Head
106
105
105
100
101
102
103
104
107
108
109
110
111
112
117
116
115
114
113
114
115
116
117
112
112
118
120
120
121
121
122
123
123
122
124
145
126
124
124
124
124
125
119
127a
127
129
129
128
19
490-SUA Cylinder Head
Ref.
Part Number Description
100 951-11337 Valve Kit
101 951-11337 Valve Kit
102 951-11962 Tappet
103 951-11335 Push Rod Kit
104 951-12592 Cylinder Head Kit
(I ncl.10 6,111-113,12 5)
105 715- 04097 Dowel Pin 12×20
106 951-12094 Gasket, Cylinder Head
107 951-10292 Spark Plug/F6Rtc
108 951-11212 Exhaust Pipe Gasket
109 710-04964 Stud M8×48.5
109 951-11207 Muer Stud Assembly
110 736-04478 Dish Flexibility Washer
111 710-05407 Bolt M10×1.25×65
112 710-05053 Bolt M10×1.25×87
113 951-11964 Intake Valve Seal
114 951-12077 Valve Spring Retainer
115 951-12078 Valve Spring
116 951-12080 Retainer, Ex.Valve Spring
117 951-12081 Adjuster, Exh Valve
118 951-11965 Push Rod Guide
119 951-11981 Rocker Arm Assembly
Ref.
Part Number Description
120 710-04962 Bolt, Pivot
121 951-11966 Rocker Arm
122 751-11123 Adjusting Nut ,Valve
123 751-11124 Nut, Pivot Locking
124 710-05054 Valve Cover Bolt
125 951-11967 Valve Cover Gasket
126 951-11220 Valve Cover
127 951-11221 Breather Hose
127a 726-04101 Breather Hose Clamp
128 951-11317 Air Shield
129 710- 04915 Bolt M6×12
145 951-11333 Valve Cover Kit
952Z490-SUA Complete Engine
951-11363 Gasket Kit - External
(Incl.79,108,125,132-134)
951-11362 Gasket Kit - Complete
(Incl.53,60,65,79,81,106,108,
125,132-134)
951-11361A Cylinder Head Ass'y
(Incl.100,101,104,106,108,109,
111-118,120-123,125,130 -133)
20
490-SUA Label Map
SERIAL NUMBER
BAR CODE LABEL
EPA LABEL
Lot N
o
. xxxxxxxxxxxx
SN: XXxxxx/xxxxxxxxxxxx
777I23017
777S33614
777I23018
777I23039
PRIMER
AMORCEUR
STOP
RUN
STOP
IGNITION
ALLUMAGE
777I22992
777I23027
If engine does not start, consult
operators manual.
Push to start - Do not run starter more than
10 times at intervals of
5 Seconds On / 5 seconds Off.
Appuyez pour démarrer - Ne
pas utiliser le démarreur plus
de 10 fois en appuyant pendant
5 secondes et en relâchant
pendant 5 secondes. Si le moteur ne démarre
pas, consultez la notice d'utilisation.
Label can be printed with either Company Name & Number
For 420 C.C. Engines Maximum. 120v., 60Hz., A.C. 13.2Amp, Output Wattage: 700W, Rated
Load Speed: 4300 R.P.M. INTERMITTENT DUTY ONLY. Do not crank for longer than 8
seconds without allowing to cool for 10 minutes. Use only SJTW/SJTW-A 3 wire grounded
cordset suitable for outdoor use and oil resistant. SEE OWNERS MANUAL. DO NOT USE IN
RAIN. Class B Insulation. Assembled in China. Thermally-Protected.
FOR ELECTRIC STARTER ASSEMBLY ONLY
AVERTISSEMENT
-
Risque de secousse électrique. N'utiliser qu'une
prise de courant correctement mise à la terre. Risque de secousse
électrique. La rallonge électrique doit rester sèche et ne pas toucher
le sol. La protéger des intempéries et la remiser à l'intérieur.
WARNING
-
Risk of electric shock. Connect to a properly grounded
outlet only. Risk of electric shock. Keep extension cord connection
dry and off the ground. Do not expose to rain, store indoors.
Pour des moteurs de 420 C.C. maximum. 120V., 60Hz., 13.2A, Puissance de sortie: 700W,
Vitesse à charge nominale: 4300 tr/min. SERVICE INTERMITTENTSEULEMENT. N'enfoncez pas le
bouton du démarreur pour faire tourner le moteur pendant plus que 8 secondes sans laisser le
démarreur refroidir pendant 10 minutes.N’utilisez qu’une rallonge à trois fils avec mise à la terre
qui est conçue pour être utilisée à l’extérieur et
résistant à l’huile, types SJ TW/SJTW-A.
CONSULTEZ LE MANUEL D'UTILISATION.
N’EMPLOYEZ PAS SOUS LA PLUIE.
Isolation de classe B. Assemblé en Chine.
Isolation thermique.
POUR LE DÉMARREUR ÉLECTRIQUE SEULEMENT
Chongqing Jili Yunfeng Industry(Group) Co.,Ltd
ACQD190
Chongqing Jili Yunfeng Industry(Group) Co.,Ltd
ACQD190
For Household and Commercial Use. Pour utilisations résidentielle et commerciale.
For 420 C.C. Engines Maximum. 120v., 60Hz., A.C. 13.2Amp, Output Wattage: 700W, Rated
Load Speed: 4300 R.P.M. INTERMITTENT DUTY ONLY. Do not crank for longer than 8
seconds without allowing to cool for 10 minutes. Use only SJTW/SJTW-A 3 wire grounded
cordset suitable for outdoor use and oil resistant. SEE OWNERS MANUAL. DO NOT USE IN
RAIN. Class B Insulation. Assembled in China. Thermally-Protected.
FOR ELECTRIC STARTER ASSEMBLY ONLY
AVERTISSEMENT
-
Risque de secousse électrique. N'utiliser qu'une
prise de courant correctement mise à la terre. Risque de secousse
électrique. La rallonge électrique doit rester sèche et ne pas toucher
le sol. La protéger des intempéries et la remiser à l'intérieur.
WARNING
-
Risk of electric shock. Connect to a properly grounded
outlet only. Risk of electric shock. Keep extension cord connection
dry and off the ground. Do not expose to rain, store indoors.
Pour des moteurs de 420 C.C. maximum. 120V., 60Hz., 13.2A, Puissance de sortie: 700W,
Vitesse à charge nominale: 4300 tr/min. SERVICE INTERMITTE NTSEULEMENT. N'enfoncez pas le
bouton du démarreur pour faire tourner le moteur pendant plus que 8 secondes sans laisser le
démarreur refroidir pendant 10 minutes.N’utilisez qu’une rallonge à trois fils avec mise à la terre
qui est conçue pour être utilisée à l’extérieur et
résistant à l’huile, types SJ TW/SJTW-A.
CONSULTEZ LE MANUEL D'UTILISATION.
N’EMPLOYEZ PAS SOUS LA PLUIE.
Isolation de classe B. Assemblé en Chine.
Isolation thermique.
POUR LE DÉMARREUR ÉLECTRIQUE SEULEMENT
For Household and Commercial Use. Pour utilisations résidentielle et commerciale.
Chongqing Vision Industry Co.,Ltd
JQ-190
Chongqing Vision Industry Co.,Ltd
JQ-190
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Troy-Bilt 31AH97P7711 Parts Manual

Troy-Bilt
Marque
Troy-Bilt
Modèle
31AH97P7711
Taper
Parts Manual
Ce manuel convient également à
Télécharger le PDF
rapport

Documents connexes

Autres documents