Powerfist 9039801 Le manuel du propriétaire

SPECIFICATIONS

HAZARD DEFINITIONS

INTRODUCTION

SAFETY

WARNING! Read and understand all instructions before

using this tool. The operator must follow basic

precautions to reduce the risk of personal injury

and/or damage to the equipment.

WORK AREA

PERSONAL SAFETY

WARNING! Wear personal protective equipment

approved by the Canadian Standards Association (CSA)

or American National Standards Institute (ANSI).

PERSONAL PROTECTIVE EQUIPMENT

PERSONAL PRECAUTIONS

SPECIFIC SAFETY PRECAUTIONS

WARNING! DO NOT let comfort or familiarity with

product (gained from repeated use) replace strict

adherence to the tool safety rules. If you use this tool

unsafely or incorrectly, you can suffer serious personal

injury.

POWER TOOL PRECAUTIONS

VIBRATION PRECAUTIONS

CUTTING PRECAUTIONS

WARNING! Some surfaces contain materials which can

be toxic. When working on materials that may contain

lead, asbestos, copper chromium arsenate or other

toxic materials, extra care should be taken to avoid

inhalation and minimize skin contact.

GRINDING PRECAUTIONS

ELECTRICAL SAFETY

WARNING! Do not touch or handle a live tool with any

part of your body that is wet or damp. Wet skin

reduces resistance to electrical current, increasing

the danger of a serious or fatal shock.

WARNING! To reduce risk of electric shock, be certain

that the plug is connected to a properly grounded

receptacle.

WARNING! All wiring should be performed by a

qualified electrician.

UNPACKING

WARNING! Do not operate the tool if any part is

missing. Replace the missing part before operating.

Failure to do so could result in a malfunction and

personal injury.

IDENTIFICATION KEY

ASSEMBLY &

INSTALLATION

FITTING THE HANDLE

FITTING ATTACHMENTS

OPERATION

CUTTING/PLUNGING

SCRAPING

GRINDING/SANDING

CARE & MAINTENANCE

WARNING! Only qualified service personnel should

repair the tool. An improperly repaired tool may

present a hazard to the user and/or others.

CLEANING

LUBRICATION

NOTICE! NEVER use a penetrating oil to lubricate the

tool. Penetrating oil may act as a solvent that can

break down the grease and cause the tool to seize up.

DISPOSAL

IMPORTANT! DO NOT pollute the environment by

allowing uncontrolled discharge of waste oil.

TROUBLESHOOTING

SPÉCIFICATIONS

DÉFINITIONS DE DANGER

INTRODUCTION

SÉCURITÉ

AVERTISSEMENT ! Veuillez lire et comprendre toutes

les instructions avant d'utiliser cet outil. L'utilisateur

doit respecter les précautions de base lorsqu'il utilise

cet outil afin de réduire le risque de blessure ou de

dommage à l'équipement.

AIRE DE TRAVAIL

SÉCURITÉ PERSONNELLE

AVERTISSEMENT ! Portez de l'équipement de

protection personnelle homologué par l'Association

canadienne de normalisation (CSA) ou l'American

National Standards Institute (ANSI).

ÉQUIPEMENT DE PROTECTION PERSONNELLE

PRÉCAUTIONS PERSONNELLES

La page est en cours de chargement...

Powerfist 9039801 Le manuel du propriétaire

Powerfist 9039801 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents