Zanussi ZWG6145 Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur

Ce manuel convient également à

User
Manual
Notice
d’utilisation
Washing
Machine
Lave-linge
ZWG 6125
ZWG 6145
ZWG 6165
192997761GB.qxd 30/10/2007 16.25 Pagina 1
2
Content
Safety information - - - - - - - - - - - - - - - - - - -3
Description of the appliance - - - - - - - - - - - -5
Detergent dispenser drawer - - - - - - - - - - - -5
Control panel and functions - - - - - - - - - - - -6
Programme table - - - - - - - - - - - - - - - - - - -9
Programme information - - - - - - - - - - - - - -11
Washing Hints - - - - - - - - - - - - - - - - - - - - -12
Before the first use - - - - - - - - - - - - - - - - -14
Operating Sequence - - - - - - - - - - - - - - - -15
Care and cleaning - - - - - - - - - - - - - - - - - -18
What to do if... - - - - - - - - - - - - - - - - - - - - 20
Technical data- - - - - - - - - - - - - - - - - - - - - 23
Consumption values - - - - - - - - - - - - - - - - 24
Installation instruction - - - - - - - - - - - - - - - 25
Environmental concerns - - - - - - - - - - - - - 28
Thank you for selecting our appliance
We wish you lots of enjoyment with your new appliance and we hope that you will consider our
brand again when purchasing household appliances.
Please read this user manual carefully and keep it throughout the product life cycle as a reference
document. The user manual should be passed on to any future owner of the appliance.
The following symbols are used in this manual:
Important information concerning your personal safety and information on how to avoid
damaging the appliance.
General information and tips
Environmental information
192997761GB.qxd 30/10/2007 16.25 Pagina 2
3
Safety information
In the interest of your safety and to ensure
the correct use, before installing and first
using the appliance, read this user manual
carefully, including its hints and warnings.
To avoid unnecessary mistakes and
accidents, it is important to ensure that all
people using the appliance are thoroughly
familiar with its operation and safety
features. Save these instructions and make
sure that they remain with the appliance if it
is moved or sold, so that everyone using it
through its life will be properly informed on
appliance use and safety.
General safety
It is dangerous to alter the specifications or
attempt to modify this product in any way.
During high temperature wash programmes
the door glass may get hot. Do not touch it!
Make sure that small pets do not climb into
the drum. To avoid this, please check into
the drum before using.
Any objects such as coins, safety pins, nails,
screws, stones or any other hard, sharp
material can cause extensive damage and
must not be placed into the machine.
Only use the advised quantities of fabric
softener and detergent. Damage to the fabric
can ensue if you over-fill. Refer to the
manufacturers recommendations of
quantities.
Wash small items such as socks, laces,
washable belts etc in a washing bag or
pillow case as it is possible for such items to
slip down between the tub and the inner
drum.
Do not use your washing machine to wash
articles with whalebones, material without
hems or torn material.
Always unplug the appliance and turn off the
water supply after use, clean and
maintenance.
Under no circumstances should you attempt
to repair the machine yourself. Repairs
carried out by inexperienced persons may
cause injury or serious malfunctioning.
Contact your local Service Centre. Always
insist on genuine spare parts.
Installation
This appliance is heavy. Care should be
taken when moving it.
When unpacking the appliance, check that it
is not damaged. If in doubt, do not use it and
contact the Service Centre.
All packing and transit bolts must be
removed before use. Serious damage can
occur to the product and to property if this is
not adhered to. See relevant section in the
user manual.
After having installed the appliance, check
that it is not standing on the inlet and drain
hose and the worktop is not pressing the
electrical supply cable.
If the machine is situated on a carpeted floor,
please adjust the feet in order to allow air to
circulate freely
Always be sure, that there is no water
leakage from hoses and their connections
after the installation.
If the appliance is installed in a location
subject to frost, please read the «dangers of
freezing» chapter.
Any plumbing work required to install this
appliance should be carried out by a
qualified plumber or competent person.
Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent person.
192997761GB.qxd 30/10/2007 16.25 Pagina 3
4
Use
This appliance is designed for domestic use.
It must not be used for purposes other than
those for which it was designed.
Only wash fabrics which are designed to be
machine washed. Follow the instructions on
each garment label.
Do not overload the appliance. See the
relevant section in the user manual.
Before washing, ensure that all pockets are
empty and buttons and zips are fastened.
Avoid washing frayed or torn articles and
treat stains such as paint, ink, rust, and
grass before washing. Underwired bras must
NOT be machine washed.
Garments which have been in contact with
volatile petroleum products should not be
machine washed. If volatile cleaning fluids
are used, care should be taken to ensure
that the fluid is removed from the garment
before placing in the machine.
Never pull the power supply cable to remove
the plug from the socket; always take hold of
the plug itself.
Never use the washing machine if the power
supply cable, the control panel, the working
surface or the base are damaged so that the
inside of the washing machine is accessible.
Child safety
This washing machine is not intended for
use by young children or infirm persons
without supervision.
Young children should be supervised to
ensure that they do not play with the
appliance.
The packaging components (e.g. plastic film,
polystyrene) can be dangerous to children -
danger of suffocation! Keep them out of
children’s reach
Keep all detergents in a safe place out of
children’s reach.
Make sure that children or pets do not climb
into the drum. To avoid this the machine
incorporates special feature.
To disable this
device and restore
the possibility of
closing the door,
rotate the button anti-
clockwise until the
groove is vertical.
To activate this
device, rotate the
button (without
pressing it) inside the
door clockwise until
the groove is
horizontal. If
necessary use a coin.
192997761GB.qxd 30/10/2007 16.25 Pagina 4
5
Description of the appliance
Detergent dispenser drawer
Control panel
Door opening handle
Drain pump
Adjustable feet
5
4
3
2
1
1
2
3
4
5
Detergent dispenser drawer
Prewash
Wash
Fabric Softener
192997761GB.qxd 30/10/2007 16.25 Pagina 5
6
Control panel
2 4 5
6
7
3
1
8
9 10
1200
900
700
500
Startuitstel
Départ différé
Start/Pauze
Marche/Arrêt
Extra spoelen
Rinçage plus
Opties
Option
Centrifugeren
Essorage
Voorwas
Prélavage
Supersnel
Rapide
Zuinig
Eco
Antikreuk
Repassage facile
Deur vergrendeld
Porte verrouillée
95°
60°
40°
30°
60°
40°
30°
30°
40°
40°
40°
40°
40°
30°
30°
Katoen
Coton
Synthetische
Synthétique
Fijne weefsels
Délicats
Handwas
Lavage à la main
Wol
Laine
Jeans
Gordijnen
Rideaux
30°
Weken
Trempage
Mini
Programme selector dial and
On/Off switch
The programme selector dial allows to select a programme
and/or to switch the machine on/off «O». It can be turned
either clockwise or anticlockwise.
Spin reduction button
Rinse Hold
Press this button repeatedly to change the spin speed, if you
want your laundry to be spun at a speed different from the
one proposed by the washing machine or to select «Rinse
Hold» option.
The relevant light will light up.
Option button
Economy (Eco)
Quick (Rapide)
By means of this button, you can select only one of the
following options: ECONOMY or QUICK.
The relevant light will light up.
1
2
3
Infos
Henceforth, the programme selector dial, the
different buttons and the programme progress
display will be indicated in all the book with the
relevant numbers given in this table.
192997761GB.qxd 30/10/2007 16.25 Pagina 6
7
Prewash button (Prélavage)
By means of this button, the machine performs a prewash
phase.
Start/Pause button (Marche/Arret)
This button allows to start the selected programme; the
corresponding green pilot light stops flashing.
This button interrupts also a programme which is running, the
corresponding green pilot light starts to flash.
Light Door (Porte verrouillé)
This light illuminates when the appliance is working (after
having pressed button
8) and indicates that the door is
locked.
Display
The display shows the following information: duration of the
selected programme, delayed start, incorrect option
selection, alarm codes and end of programme.
7
Easy Iron button (Repassage
Facile)
Selecting this option the laundry is gently washed and spun
to avoid any creasing. In this way ironing is easier.
Furthermore the machine will perform additional rinses.
5
4
8
9
Delay Start buttons (Départ différé)
By means of this buttons, the wash programme can be
delayed from 30 min - 60 min - 90 min, 2 hours and then by
1 hour up to a maximum of 20 hours .
10
Extra Rinse button (Rinçage plus)
By means of this button, the machine performs some
additional rinses.
6
192997761GB.qxd 30/10/2007 16.25 Pagina 7
8
Rinse hold
By selecting this option the water of the last
rinse is not emptied out to prevent the fabrics
from creasing. When the programme has
finished, the door is blocked to indicate that the
water must be emptied out. To empty out the
water, please read the chapter «At the end of
the programme».
Economy
Only for cottons and synthetics items lightly or
normally soiled at a temperature of 40°C or
higher. The washing time will be prolonged and
the washing temperature will be reduced.
Quick
Short cycle for lightly soiled items or for laundry
which needs only freshening up.
We recommend you to reduce the fabrics
loading.
Prewash
Select this option if you wish your laundry to be
prewashed at 30°C before the main wash.
The prewash ends with a short spin in
programmes for Cotton and Synthetic fabrics,
whereas in the programmes for Delicate fabrics
the water is only drained.
Easy Iron
Selecting this option the laundry is gently
washed and spun to avoid any creasing. In this
way ironing is easier. Furthermore the machine
will perform some additional rinses depending
on the fabrics.
Extra Rinse
The machine performs some additional rinses
during the washing cycle. This option is
recommended for people who are allergic to
detergents, and in areas where the water is
very soft.
Door pilot light
After having pressed
the button 8, this light
illuminates and stays
on.
The light DOOR indicates when the door can
be opened:
light on: the door is locked and cannot be
opened. The appliance is working.
light off: the door can be opened.
The washing programme has finished.
Deur vergrendeld
Porte verrouillée
Functions
192997761GB.qxd 30/10/2007 16.25 Pagina 8
9
HANDWASH
(LAVAGE A LA MAIN)
40° - 30° - COLD
Special programme for
hand washed fabrics
Spin Red., Rinse Hold
Main wash
Rinses
Short spin
Programme table
SYNTHETICS
(SYNTHETISCHE)
60° - 40° - 30°
Synthetic or mixed
fabrics
Spin Red., Rinse Hold,
Quick, Economy*,
Prewash, Easy Iron,
Extra Rinse
Main wash
Rinses
Short spin
DELICATES
(DELICATS)
40° - 30°
Delicate items
Spin Red.**, Rinse Hold,
Quick, Prewash, Extra
Rinse
Main wash
Rinses
Short spin
Programme/
Temperature
Type of laundry Options
Description of
programme
COTTON
(COTON)
95° - 60°
White and coloured
cotton (heavily soiled
items)
Spin Red., Rinse Hold,
Quick, Economy,
Prewash, Easy Iron,
Extra Rinse
Main wash
Rinses
Long spin at the max
speed
COTTON
(COTON)
60° - 40° - 30°
White and coloured
cotton (normally soiled
cotton items)
Spin Red., Rinse Hold,
Quick, Economy*,
Prewash, Easy Iron,
Extra Rinse
Main wash
Rinses
Long spin at the max
speed
WOOL
(LAINE)
40°
Programme for wool
«Pure new wool, non-
shrink, machine
washable» label
Spin Red., Rinse Hold
Main wash
Rinses
Short spin
JEANS
40°
Special programme for
jeans or dark colours
cotton items
Spin Red., Rinse Hold,
Prewash, Easy Iron
Main wash
Rinses
Short spin
CURTAINS
(RIDEAUX)
40°
Special delicate washing
cycle for curtains
Spin Red.**, Rinse Hold,
Extra Rinse
Prewash, Main wash
Rinses
Short spin
* This option is not active at a temperature lower than 40°C.
** The spin speed cannot be reduced in models ZWG 6145 and ZWG 6165.
192997761GB.qxd 30/10/2007 16.25 Pagina 9
10
Programme table - Special programmes
Programme/
Temperature
Type of laundry Options
Description of
programme
SOAK
(TREMPAGE)
30°
Heavy soiled laundry
(not for wool and
handwash)
Prewash/Soak for about
20 minutes
Stop with water in the tub
MINI 30
30°
Quick wash for cotton and
synthetics lightly soiled
items or worn once
Spin Red.**
Main wash
Rinses
Short spin
RINSES
Separate rinses cycle with
softener, if needed, for
hand washed cotton items
Spin Red., Rinse Hold,
Easy Iron, Extra Rinse
Rinses
Long spin at the max
speed
DRAIN
For emptying out the
water in programmes
which stop with water in
the tub
Draining of water
SPIN
Long spin at max speed for handwashed cotton
items or for emptying out the water in the tub
Drain and long spin
O
Cancelling /
Switching off
of the machine
To interrupt a running programme, to cancel an
incorrect option selection or to switch the machine
off
MAX LOADS:
Max load for Cottons .................................6 kg
Max load for Synthetics..............................3 kg
Max load for Delicates . . . . . . . . . . . . . . .3 kg
Max load for Handwash and Wool . . . . . .2 kg
Max load for Jeans . . . . . . . . . . . . . . . . . 3 Kg
Max load for Curtains . . . . . . . . . . . . . . . .2 kg
Max load for Soak . . . . . . . . . . . . . . . . . .6 Kg
Max load for Mini30 . . . . . . . . . . . . . . . . .3 Kg
Max load for Cottons + Quick ...................3 kg
Max load for Synthetics + Quick ............1,5 kg
** The spin speed cannot be reduced in models ZWG 6145 and ZWG 6165.
192997761GB.qxd 30/10/2007 16.25 Pagina 10
11
Programme information
For emptying out the water of the last rinse in cotton programmes
with the «Night Cycle», «Rinse hold» option and at the end of SOAK
programme. Turn first the programme selector dial to «O», then
select programme DRAIN and depress the button 8.
SPIN
Separate spin for cotton items washed by hand or at the end of a
programme which stops with water left in the tub («Night Cycle»,
«Rinse hold» option and at the end of SOAK programme).
According to the type of fabric, it is possible to choose a different
speed by means of the relevant button from one proposed by the
machine.
JEANS
With this programme it is possible to wash free time items as pants,
shirts or jackets in Jeans and also jersey made of hi-tech materials.
Some extra rinses will be carried out by the machine.
DRAIN
Special washing cycle for curtains which add automatically a prewash
phase in order to eliminate the dust from the curtains. Important: We
recommend you NOT to put the detergent into the compartment of
the detergent drawer to rinse curtains before the main wash with only
water.
CURTAINS
SOAK
Special programme for heavily soiled laundry. The machine performs
a soak at 30°C. At the end of this time the machine will stop
automatically with water left in the tub. Before starting a new washing
phase, it is necessary to empty out the water by:
Draining only: turn the programme selector dial to Drain
programme. (Depress the button 8).
Draining and spin: turn the programme selector dial to programme
Spin, reduce the spin speed by means of button 2 , and then
depress button 8.
Important!
This programme cannot be used for very delicate fabrics as silk or
wool. Pour the detergent for the soak programme into the
compartment marked . At the end of the soak (after having
emptied out the water) you can select the washing programme.
(First turn the programme selector dial to «O», then to the
programme and depress the button 8.)
RINSES
With this separate programme it is possible to rinse and spin cotton
garments which have been washed by hand.
The machine performs 3 rinses, followed by a final spin at maximum
speed. The spin speed can be reduced by depressing button 2.
MINI30
This is a complete programme for cotton, synthetics and delicate
items that can be combined with the «Delay start» option.To be used
for laundry which is lightly soiled or which needs freshening up.
192997761GB.qxd 30/10/2007 16.25 Pagina 11
12
Washing hints
Sorting the laundry
Follow the wash code symbols on each
garment label and the manufacturers washing
instructions. Sort the laundry as follows: whites,
coloureds, synthetics, delicates, woollens.
Temperatures
Before loading the laundry
Never wash whites and coloureds together.
Whites may lose their «whiteness» in the
wash.
New coloured items may run in the first wash;
they should therefore be washed separately
the first time.
Make sure that no metal objects are left in
the laundry (e.g. hair clips, safety pins,
pins). Button up pillowcases, close zip
fasteners, hooks and poppers. Tie any belts
or long tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special
detergent or detergent paste.
Treat curtains with special care. Remove hooks
or tie them up in a bag or net.
Maximum loads
Recommended loads are indicated in the
programme charts.
General rules:
Cotton, linen: drum full but not too tightly
packed;
Synthetics: drum no more than half full;
Delicate fabrics and woollens: drum no more
than one third full.
Washing a maximum load makes the most
efficient use of water and energy.
For heavily soiled laundry, reduce the load
size.
Laundry weights
The following weights are indicative:
Removing stains
Stubborn stains may not be removed by just
water and detergent. It is therefore advisable to
treat them prior to washing.
Blood: treat fresh stains with cold water. For
dried stains, soak overnight in water with a
special detergent then rub in the soap and
water.
90° or 95°
for normally soiled white cottons
and linen (e.g. tea cloths, towels,
tablecloths, sheets...)
50°/60°
for normally soiled, colour fast
garments (e.g. shirts, night
dresses, pyjamas....) in linen,
cotton or synthetic fibres and for
lightly soiled white cotton (e.g.
underwear).
30°-40°
for delicate items (e.g. net
curtains), mixed laundry including
synthetic fibres and woollens
bearing the label «pure new wool,
machine washable, non-shrink».
1200 gbathrobe
100 gnapkin
700 gquilt cover
500 gsheet
200 gpillow case
250 gtablecloth
200 gtowelling towel
100 gtea cloth
200 gnight dress
100 gladies’ briefs
600 gman’s work shirt
200 gman’s shirt
500 gman’s pyjamas
100 gblouse
100 gmen’s underpants
192997761GB.qxd 30/10/2007 16.25 Pagina 12
13
Oil based paint: moisten with benzine stain
remover, lay the garment on a soft cloth and
dab the stain; treat several times.
Dried grease stains: moisten with turpentine,
lay the garment on a soft surface and dab the
stain with the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a
rust removing product used cold. Be careful
with rust stains which are not recent since the
cellulose structure will already have been
damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well
(whites and fast coloureds only).
Grass: soap lightly and treat with bleach
(whites and fast coloureds only).
Ball point pen and glue: moisten with
acetone (*), lay the garment on a soft cloth and
dab the stain.
Lipstick: moisten with acetone as above, then
treat stains with methylated spirits. Remove
any residual marks from white fabrics with
bleach.
Red wine: soak in water and detergent, rinse
and treat with acetic or citric acid, then rinse.
Treat any residual marks with bleach.
Ink: depending on the type of ink, moisten the
fabric first with acetone (*), then with acetic
acid; treat any residual marks on white fabrics
with bleach and then rinse thoroughly.
Tar stains: first treat with stain remover,
methylated spirits or benzine, then rub with
detergent paste.
(*) do not use acetone on artificial silk.
Detergents and additives
Good washing results also depend on the
choice of detergent and use of the correct
quantities to avoid waste and protect the
environment. Although biodegradable,
detergents contain substances which, in large
quantities, can upset the delicate balance of
nature.
The choice of detergent will depend on the
type of fabric (delicates, woollens, cottons,
etc.), the colour, washing temperature and
degree of soiling.
All commonly available washing machine
detergents may be used in this appliance:
powder detergents for all types of fabric,
powder detergents for delicate fabrics (60°C
max) and woollens,
liquid detergents, preferably for low
temperature wash programmes (60°C max)
for all types of fabric, or special for woollens
only.
The detergent and any additives must be
placed in the appropriate compartments of the
dispenser drawer before starting the wash
programme.
If using concentrated powder or liquid
detergents, a programme without prewash
must be selected.
The washing machine incorporates a
recirculation system which allows an optimal
use of the concentrated detergent.
Pour liquid detergent into the dispenser drawer
compartment marked just before starting
the programme.
Any fabric softener or starching additives must
be poured into the compartment marked
before starting the wash programme.
Follow the product manufacturers
recommendations on quantities to use and do
not exceed the «MAX» mark in the
detergent dispenser drawer.
Quantity of detergent to be used
The type and quantity of detergent will depend
on the type of fabric, load size, degree of
soiling and hardness of the water used.
Water hardness is classified in so-called
«degrees» of hardness. Information on
hardness of the water in your area can be
obtained from the relevant water supply
company, or from your local authority.
Follow the product manufacturers’ instructions
on quantities to use.
192997761GB.qxd 30/10/2007 16.25 Pagina 13
14
Degrees of water hardness
Follow the product manufacturers’ instructions
on quantities to use.
Use less detergent if:
you are washing a small load,
the laundry is lightly soiled,
large amounts of foam form during washing.
Level
Degrees
German
°dH
French
°T.H.
Characteristic
1 0-7 0-15soft
2 8-14 16-25medium
3 15-21 26-37hard
4 > 21 > 37very hard
Before the first use
WARNING!
Ensure that the electrical and water
connections comply with the installation
instructions.
IMPORTANT!
Remove the polystyrene block and any
material from the drum.
IMPORTANT!
We recommend you to pour 2 litres of water
into the main wash compartment of the
detergent drawer in order to activate the ECO
valve. Than run a cotton cycle at 95°C, without
any laundry in the machine, to remove any
manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the
dispenser drawer and start the machine.
Acoustic signals
The machine is provided of an acoustic device,
which sounds in the following cases:
at the end of the cycle
in the event of operating problems
By pressing the buttons 3 and 4
simultaneously for about 6 seconds, the
acoustic signal is deactivated (except for the
events of operating problems).
By pressing these 2 buttons again, the the
acoustic signal is reactivated.
Child safety lock
This device permits you to leave the appliance
unattended during its functionning, so avoiding
that children might accidentally start the
machine or modify a running programme.
This function remains able also when the
washing machine is not working.
To enable (disable) this option press
simoultaneously for about 6 seconds buttons
5
and 6 buttons until the icon appears
(disappears) on (from) the display.
There are two different ways to set this option:
before pressing the button 8:
it will be impossible to start the machine.
after pressing the button 8:
it will be impossible to change any other
programme or option.
192997761GB.qxd 30/10/2007 16.25 Pagina 14
15
Operating sequence
1. Load the laundry
Open the door by
carefully pulling the
door handle outwards.
Place the laundry in
the drum, one item at
a time, shaking them
out as much as
possible. Close the door.
2.Measure out the detergent and the fabric
softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required,
pour it into the main wash compartment
and, if you wish to carry out a programme with
the prewash phase or the soak programme,
pour it into the compartment marked .
If required, pour fabric softener into the
compartment marked (the amount used
must not exceed the «MAX» mark in the
drawer). Close the drawer gently.
Select the required programme by means of
the programme selector dial
(1)
Turn the programme selector dial to the
required programme.
The green light of button 8 starts to flash.
It can be turned either clockwise or
anticlockwise.
On position «O» the programme is reset and
the machine is switched OFF.
At the end of the programme the selector
dial must be turned to position «O», to
switch the machine off.
ATTENTION!
If you turn the programme selector dial to ano-
ther programme when the machine is working,
tthe red pilot light of button
8 will flash 3 times
and the message Err is displayed on the dis-
play to indicate a wrong selection. The machi-
ne will not perform the new selected program-
me.
Select the spin speed, the Rinse Hold
option by pressing button
2
When selecting a programme, the light
corresponding to the maximum speed allowed
for that programme will illuminate. The
relevant light will light up.
Select the desired option by means of
buttons
3,
4, 5 and 6
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired programme
and before depressing the button 8.
For the compatibility of the options with the
washing programmes, refer to the section
«Programmes table».
Start the programme by pressing button
8
To start the selected programme, press this
button; the corresponding green pilot light
stops flashing.
On programme progress display the pilot light
DOOR illuminates to indicate that the appliance
starts operating and the door is locked.
IMPORTANT!
If an option which is not compatible with the set
wash programme is selected, the message Err
is displayed for few seconds and the red light
of this button flashes for 3 times.
192997761GB.qxd 30/10/2007 16.25 Pagina 15
16
Select the delayed start by pressing the
button 10
Depress button this button to select the
required delay.
The selected delay time value will appear on
the display for few seconds, then the duration
of the programme will appear again.
You must select this option after you have set
the programme and before you press the
button
5.
You can cancel the delay time at any moment,
before you press button
8. If you have already
pressed it, and you wish to cancel the delay
time, proceed as follows:
set the washing machine to PAUSE by
pressing button
8;
press the button
10 once. On the display will
appear the symbol «0’».
press button
8 again to start the programme.
IMPORTANT!
The selected delay can be modified only after
you have turned the programme selector dial
to the «
o» position and after you have
selected the programme again.
The door will be locked throughout the delay
time. If you need to open the door, you must
first set the washing machine to PAUSE by
pressing button
8 and wait few minutes
before opening the door. After you have
closed the door, press the same again.
Note!
The Delay Start cannot be selected with
«Drain» programme.
Display
The display shows the following information:
After selecting a programme the duration of
the selected programme appears on the dis-
play.
During the program-
me, the time remai-
ning is updated every
minute.
The Delayed start appears on the display for
about 3 seconds, then the duration of the
previously selected programme is displayed.
The delay time value
decreases by one unit
every hour and then,
when 1 hour remain,
every minute.
The incorrect option selection is indicated by
the message Err displayed for few seconds
and by flashing of the light button
8.
In the event of operating problems, some
alarm codes can be displayed, (see paragraph
“Something not working”).
The End of programme is indicated by a
flashing zero «
0».
0
E20
2.00
192997761GB.qxd 30/10/2007 16.25 Pagina 16
17
Altering an option or a running programme
It is possible to change any option before the
programme carries it out.
Before you make any change, you must pause
the washing machine by pressing button
8.
Changing a running programme is possible
only by resetting it. Turn the programme
selector dial to «O» and then to the new
programme position. Start the new programme
by depressing button
8 again.
The washing water in the tub will not empty
out.
Interrupting a programme
Depress tbutton
8 to interrupt a programme
which is running, the corresponding light starts
to flash. Depress the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to «O» to cancel a
programme which is running. Now you can
select a new programme.
Opening the door after the programme has
started
First set the machine to pause by pressing the
button
8.
If the light DOOR goes off, the door can be
opened. If it does not switch off, this means
that the machine is already heating, that the
water level is above the bottom edge of the
door. In this cases the door cannot be opened.
If you cannot open the door but you need to
open it you have to switch the machine off by
turning the selector dial to «O». After few
minutes the door can be opened
(Pay attention to the water level and
temperature!).
After this procedure, it will be necessary to set
the programme and the options again and then
to depress button 8.
At the end of the programme
The machine stops automatically. Some
acustic signals sound and on the display will
appear a flashing «
0 ». The button 8 light and
the light DOOR go off. The door can be
opened.
If at the end of a programme there is water in
the tub, to empty out the water follow the
following instructions:
1.turn the programme selector dial to «O»
2.select the DRAIN or SPIN programme
3.reduce the spin speed, if needed, by means
of the button
2
4.depress button 8
5.at the end of programme, the display shows
a flashing zero «0», the light DOOR goes off
and it will be possible to open the door.
At the end of the cycle, turn the programme
selector dial to «O» to switch the machine off.
Remove the laundry from the drum and
carefully check that the drum is empty.
If you do not intend to carry out another wash,
close the water tap.
Leave the door open to prevent the formation
of mildew and unpleasant smells.
192997761GB.qxd 30/10/2007 16.25 Pagina 17
18
IMPORTANT!
You must DISCONNECT the appliance from
the electricity supply, before you can carry out
any cleaning or maintenance work.
Descaling
The water we use normally contains lime. It is
a good idea to periodically use a water
softening powder in the machine. Do this
separately from any laundry washing, and
according to the softening powder
manufacturer's instructions. This will help to
prevent the formation of lime deposits.
Maintenance Wash
With the use of low temperature washes it is
possible to get a build up of residues inside the
drum.
We recommend that a maintenance wash be
performed on a regular basis.
To run a maintenance wash:
The drum should be empty of laundry.
Select the hottest cotton wash programme.
Use a normal measure of detergent, must be
a powder with biological properties.
External cleaning
Clean the exterior cabinet of the appliance with
soap and water only, and then dry thoroughly.
Cleaning the dispenser drawer
The washing powder and additive dispenser
drawer should be cleaned regularly.
To aid cleaning, the top part of the additive
compartment should be removed.
Remove the drawer by pressing the catch
downwards and by pulling it out. Flush it out
under a tap, to remove any traces of
accumulated powder.
Cleaning the drawer recess
Having removed the
drawer, use a small
brush to clean the
recess, ensuring that
all washing powder
residue is removed
from the upper and
lower
part of the recess.
Replace the drawer and run the rinse
programme without any clothes in the drum.
Cleaning the pump
The pump should be inspected if
the machine does not empty and/or spin
the machine makes an unusual noise during
draining due to objects such as safety pins,
coins etc. blocking the pump.
Proceed as follows:
Disconnect the appliance.
If necessary wait until the water has cooled
down.
Open the pump
door.
Place a container
close to the pump to
collect any spillage.
Pull out the
emergency emptying
hose, place it in the
container and remove its cap.
When no more water comes out, unscrew the
pump cover and remove it. Always keep a
rag nearby to dry up spillage of water when
removing the cover.
Care and cleaning
192997761GB.qxd 30/10/2007 16.25 Pagina 18
19
Remove any objects from the pump impeller
by rotating it.
Put the cap back on the emergency emptying
hose and place the latter back in its seat.
Screw the pump
cover fully in.
Close the pump
door.
IMPORTANT!
When the appliance is in use and depending
on the programme selected there can be hot
water in the pump.
Never remove the pump cover during a wash
cycle, always wait until the appliance has
finished the cycle, and is empty. When
replacing the cover, ensure it is securely
retightened so as to stop leaks and young
children being able to remove it.
Cleaning the water inlet filter
If your water is very hard or contains traces of
lime deposit, the water inlet filter may become
clogged. It is therefore a good idea to clean it
from time to time.
Turn off the water tap.
Unscrew the water
inlet hose. Clean the
filter using a hard
bristle brush.
Tighten up the inlet
hose.
The dangers of freezing
If the machine is exposed to temperatures
below 0°C, certain precautions should be taken.
Turn off the water tap.
Unscrew the inlet hose.
Place the end of the emergency emptying
hose and that of the inlet hose in a bowl
placed on the floor and let water drain out.
Screw the water inlet hose back on and
reposition the emergency emptying hose
after having put the cap on again.
When you intend to start the machine up
again, make sure that the room temperature
is above 0°C.
IMPORTANT!
Every time you drain the water through the
emergency emptying hose you must pour 2
litres of water into the main wash compartment
of the detergent drawer and then run the drain
programme. This will activate the ECO VALVE
device avoiding that part of the detergent
remains unused at next washing.
Emergency emptying out
If the water is not discharged, proceed as
follows to empty out the machine:
pull out the plug from the power socket;
close the water tap;
if necessary, wait until the water has cooled
down;
open the pump door;
place a bowl on the floor and place the end
of the emergency emptying hose into the
bowl. Remove its cap. The water should
drain by gravity into the bowl. When the bowl
is full, put the cap back on the hose. Empty
the bowl. Repeat the procedure until water
stops flowing out;
clean the pump if necessary as previously
described;
replace the emergency emptying hose in its
seat after having plugged it;
screw the pump cover again and close the
door.
192997761GB.qxd 30/10/2007 16.25 Pagina 19
20
Malfunction Possible Cause / Solution
The washing machine does not start:
The door has not been closed. E40
Close firmly the door.
The plug is not properly inserted in the power socket.
Insert the plug into the power socket.
There is no power at the socket.
Please check your domestic electrical installation.
The main fuse has blown.
Replace the fuse.
The selector dial is not correctly positioned and the
button
8 has not been depressed.
Please turn the selector dial and press the button 8
again.
The button
10 has been selected.
If the laundry are to be washed immediately, cancel
the delay start
The machine does not fill:
The water tap is closed. E10
Open the water tap.
The inlet hose is squashed or kinked.
E10
Check the inlet hose connection.
The filter in the inlet hose is blocked. E10
Clean the water inlet hose filter.
The door is not properly closed.
E40
Close firmly the door.
What to do if...
IMPORTANT!
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily
without calling out an engineer. Before contacting your local Service Centre, please carry out the
checks listed below.
During machine operation it is possible that the red pilot light of button
8 flashes, few acoustic
signals sound and one of the following alarm codes appears on the display to indicate that the
machine is not working:
E10: problem with the water supply
E20: problem with water draining
E40: door open.
Once the problem has been eliminated, press the button 8 to restart the programme. If after all
checks, the problem persists, contact your local Service Centre.
192997761GB.qxd 30/10/2007 16.25 Pagina 20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Zanussi ZWG6145 Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues