R03.002_22/08/2011
TECHNICAL FILE
Novocanto® Maxi
Novocanto® Maxi is a prole made of our exclusive material Maxi,
designed to protect the edges of ceramic installations. This prole
has an attractive appearance, similar to wood, which allows it to
adapt to multiple environments. Novocanto® Maxi makes a joint of
technology, sustainability and functionality just in one product.
General Features
Model registered as a community design
Nº 1.073.340 - 0003
Material: Maxi
Lenght: 8ft2in / 2,5 m.l.
Dimensions: h: 5/16”, 3/8”, 1/2”
8, 10, 12 mm.
Packaging: 100 u./box
Finishes:
Applications
Technical Features and tests
Page 1 of 3
Resistance to chemical
agents
Very good except acetone, chromic acid and sulfu-
ric acid.
Water absorption
Very small absorption, high dimensional stability.
Retains its weight after dry.
Fire reaction M1 Classication
UNE 23.727-90 1R
Abrasion resistance Up to 2200 cycles without variation
UNE EN 438-2:2005
Aptdo. 23
Surface resistance to
staining
Resistance to acetone, coffee 176ºF/80ºC, bitumen,
hydrogen peroxyde 30%, sodium hydroxide 25%.
Acetone: surface degradation and blisters.
Rest: without changing.
Impact resistance
Spring: 34 N
Ball drop: 3,93ft/120 cm. maximum drop /
0,38 in./9,9 mm mark diameter
Cigarette burns Surface degradation
Novocanto® Maxi is a prole whose main function is protecting the edges of ceramic installations.
The installation of Maxi outdoors, could result in a variation in its original color, being signicantly higher
in the range of redish colors. To avoid color these variations due to the continuous sun exposure, we
recommend the installation of the Maxi range indoors.
R03.002_22/08/2011
TECHNICAL FILE
Novocanto® Maxi
Maxi
Materials
Placement
Cleaning and maintenance
Warnings
• Part of the composition of Maxi and Maxikenya is natural, so it may have differences in tone that
can not be considered as manufacturing defects.
• It is recommended to take the prole by its central part, avoiding taking it by its tops to prevent
bending stresses which could cause scratches or breaks.
• Do not bend excessively the material. Store it always horizontally in dry places.
• It can’t be sanded due to the possible damage on its surface appearance.
• It stands well in damp environments but it is not recommended to install it in submerged places.
• Take into account that the installation of Maxi products outdoors, means a natural variation of its
original color, being signicantly higher in redish colors.
Page 2 of 3
1 2 3 4
5
Maxi is a composite material, from the range of WPC products, formed by PVC and vegetable bers.
Those bers proceed from recycling of organic waste from agriculture. The waste reduction and the
recycling of materials, help Maxi to fulll the Emac’s commitment with the Environment and the
sustainable construction.
Maxi has an original nish, similar to wood and natural elements, which adapts to different decorative
environments. The main advantage of this composite material is that it has the best qualities of PVC
and vegetable bers such as good mechanic strenght, abrasion resistance and dimensional stability
among others.
1. Spread a big amount of thin-set mortar on the surface where you are going to place the prole.
2. Place the prole aligned to the corner and press it, so the thin set mortar could pass through the
holes of the anchoring wing.
3. Place the tiles along the anchoring wing and press to get an optimal adhesion.
4. Continue tiling the wall.
5. Finally, clean the leftover material, remove the protective lm if necessary and let dry.
To see the video, capture this
image with your mobile phone
(QR code reader software is
necessary) or click on it.
You can clean Novocanto® Maxi with a cloth dampened just with water or with a solution of water and
neutral detergent 5%. The correct use of bleach doesn’t affect the material.
It is not recommended to use chromic or sulphuric acids or polar solvents as toluene or acetone for
its cleaning.
TECHNICAL FILE
R03.002_22/08/2011
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in [email protected].
Technical information
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Novocanto® Maxi
Indoors Wall tiling
Sustainable commitment
Page 3 of 3
Ecology Pack by Nerghal
In Emac® we are aware about the value of moving towards a sustainable and respectful commitment
with the Environment. Therefore, in our commitment with nature, quality and service, in Emac® we
work with the following principles:
As result of this commitment and the strong investment in R&D, arises Maxi. Our material has the best
mechanical properties and functional requirements tested in different tests in specialized Institutions
of each sector. The use of bers proceding from the recycling of organic waste of the Agriculture, shows
that it’s posible to obtain high-performance materials minimizing the environmental impact.
In the continuous search of excellence, Emac® continues betting every day on the innovation and
quality of their products and the strict fullling of their Environmental and Quality policies.
- We collaborate with companies that use harmless products and raw materials in their production
processes. They avoid so environmental risks in their processes and in the posterior transport.
- We develope innovative products that, plus solve the market requirements and fulll the standards
in the sector, doesn’t damage the Environment and help to its conservation and care.
- We continue investigating new processes and materials which allow us to continue fullling our
commitment.
-
1
-
2
-
3
dans d''autres langues
- English: Emac NCMX75516 User manual
Documents connexes
-
Emac NEMX821 Manuel utilisateur
-
-
Emac NJP1031 Manuel utilisateur
-
-
-
-
Emac NPMXTK7812 Guide d'installation
-
-
-