MSI G52-73881X4 Le manuel du propriétaire

i

K9A2 CF Series

MS-7388 (V1.X) Mainboard

G52-73881X4

ii

Copyright Notice

The material in this document is the intellectual property of MICRO-STAR

INTERNATIONAL. We take every care in the preparation of this document, but no

guarantee is given as to the correctness of its contents. Our products are under

continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

NVIDIA, the NVIDIA logo, DualNet, and nForce are registered trademarks or trade-

marks of NVIDIA Corporation in the United States and/or other countries.

AMD, Athlon™, Athlon™ XP, Thoroughbred™, and Duron™ are registered trade-

marks of AMD Corporation.

Intel

®

and Pentium

®

are registered trademarks of Intel Corporation.

PS/2 and OS

®

/2 are registered trademarks of International Business Machines

Corporation.

Windows

®

95/98/2000/NT/XP are registered trademarks of Microsoft Corporation.

Netware

®

is a registered trademark of Novell, Inc.

Award

®

is a registered trademark of Phoenix Technologies Ltd.

AMI

®

is a registered trademark of American Megatrends Inc.

Revision History

Revision Revision History Date

V1.0 First release for Europe November 2007

Technical Support

If a problem arises with your system and no solution can be obtained from the user’s

manual, please contact your place of purchase or local distributor. Alternatively,

please try the following help resources for further guidance.

Visit the MSI website for FAQ, technical guide, BIOS updates, driver updates,

and other information: http://global.msi.com.tw/index.php?

func=faqIndex

Contact our technical staff at: http://support.msi.com.tw/

iii

Safety Instructions

CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the

manufacturer.

1. Always read the safety instructions carefully.

2. Keep this User’s Manual for future reference.

3. Keep this equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. The openings on the enclosure are for air convection hence protects the equip-

ment from overheating. DO NOT COVER THE OPENINGS.

6. Make sure the voltage of the power source and adjust properly 110/220V be-

fore connecting the equipment to the power inlet.

7. Place the power cord such a way that people can not step on it. Do not place

anything over the power cord.

8. Always Unplug the Power Cord before inserting any add-on card or module.

9. All cautions and warnings on the equipment should be noted.

10. Never pour any liquid into the opening that could damage or cause electrical

shock.

11. If any of the following situations arises, get the equipment checked by a service

personnel:

† The power cord or plug is damaged.

† Liquid has penetrated into the equipment.

† The equipment has been exposed to moisture.

† The equipment has not work well or you can not get it work according to

User’s Manual.

† The equipment has dropped and damaged.

† The equipment has obvious sign of breakage.

12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED, STOR-

AGE TEMPERATURE ABOVE 60

0

C (140

0

F), IT MAY DAMAGE THE EQUIPMENT.

iv

FCC-B Radio Frequency Interference Statement

This equipment has been

tested and found to comply

with the limits for a Class B

digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the measures listed

below.

† Reorient or relocate the receiving antenna.

† Increase the separation between the equipment and receiver.

† Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

† Consult the dealer or an experienced radio/television technician for help.

Notice 1

The changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

VOIR LA NOTICE D ’INSTALLATION AVANT DE RACCORDER AU RESEAU.

Micro-Star International

MS-7388

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

v

WEEE (Waste Electrical and Electronic Equipment) Statement

vi

vii

viii

CONTENTS

Copyright Notice.........................................................................................................ii

Trademarks..................................................................................................................ii

Revision History.........................................................................................................ii

Technical Support......................................................................................................ii

Safety Instructions...................................................................................................iii

FCC-B Radio Frequency Interference Statement.............................................iv

WEEE (Waste Electrical and Electronic Equipment) Statement.......................v

English......................................................................................................................En-1

Specifications....................................................................................................En-2

Central Processing Unit: CPU...........................................................................En-5

Memory...............................................................................................................En-7

Connectors, Jumpers, Slots.............................................................................En-9

Back Panel........................................................................................................En-18

BIOS Setup.......................................................................................................En-21

Software Information......................................................................................En-25

Deutsch....................................................................................................................De-1

Spezifikationen..................................................................................................De-2

Hauptprozessor: CPU.......................................................................................De-5

Speicher.............................................................................................................De-7

Anschlüsse, Steckbrücken und Slots.............................................................De-9

Hinteres Anschlusspaneel.............................................................................De-18

BIOS Setup.......................................................................................................De-21

Software-Information......................................................................................De-25

Français.....................................................................................................................Fr-1

Spécificités.........................................................................................................Fr-2

Central Processing Unit: CPU............................................................................Fr-5

Mémoire...............................................................................................................Fr-7

Connecteurs, Cavaliers, Slots..........................................................................Fr-9

Panneau Arrière...............................................................................................Fr-18

Configuration du BIOS......................................................................................Fr-21

Information de Logiciel.....................................................................................Fr-25

Русский ....................................................................................................................Ru-1

Характеристики ...............................................................................................Ru-2

Центральный процессор (CPU).....................................................................Ru-5

Память ..............................................................................................................Ru-7

Коннекторы, перемычки, разъемы..............................................................Ru-9

Задняя панель ...............................................................................................Ru-18

Настройка BIOS..............................................................................................Ru-21

Сведения о программном обеспечении ...................................................Ru-25

En-1

English

K9A2 CF Series

User’s Guide

English

En-2

MS-7388 Mainboard

Specifications

Processor Support

- AMD

®

Phenom/Athlon/Sempron series processors in AM2/ AM2+

package

- Supports 4 pin CPU Fan Pin-Header with Fan Speed Control

(For the latest information about CPU, please visit

http://global.msi.com.tw/index.php?func=cpuform)

Supported FSB

- AM2 CPU supports Hyper Transport 1.0

- AM2+ CPU supports Hyper Transport 3.0

Chipset

- North Bridge: AMD

®

790X chipset

- South Bridge: AMD

®

SB600 chipset

Memory Support

- DDR2 800/667/533 DRAM (240pin/ 1.8V)

- 4 DDR2 DIMMs (8GB Max)

(For more information on compatible components, please visit

http://global.msi.com.tw/index.php?func=testreport)

LAN

- Supports 10/100/1000 Fast Ethernet by Realtek 8111B

1394 (Optional)

- Transfer rate is up to 400Mbps

- Controlled by VIA VT6308P (optional)

Audio

- Chip integrated by Realtek

®

ALC888

- Flexible 8-channel audio with jack sensing

- Compliant with Azalia 1.0 spec

IDE

- 1 IDE port by SB600

- Supports Ultra DMA 66/100/133 mode

- Supports PIO, Bus Master operation mode

SATA

- 4 SATA2 ports by SB600

- 1 eSATA port by Silicon Image Sil3531(optional)

- Supports storage and data transfers at up to 300MB/s

Floppy

- 1 floppy port

- Supports 1 FDD with 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB

En-3

English

RAID

- SATA1~4 support RAID 0/ 1/ 0+1 mode

Connectors

Back panel

- 1 PS/2 mouse port

- 1 PS/2 keyboard port

- 1 1394 port (optional)

- 1 COM port

- 1 LAN jack

- 4 USB 2.0 ports

- 1 eSATA port (optional)

- 6 flexible audio jacks

On-Board Pinheaders

- 3 USB 2.0 pinheaders

- 1 1394 pinheader (optional)

- 1 Front Panel Audio pinheader

- 1 CD-in pinheader

- 1 TPM Module pinheader (optional)

- 1 SPDIF-out pinheader (optional)

- 1 Chassis Intrusion pinheader

TPM (optional)

- Supports TPM

Slots

- 2 PCI Express x16 slots compatible with PCIE 2.0 specification,

supports CrossFire mode

a. the mazarine PCIE x16 (PCI_EX1) slot supports PCIE x16

speed

b. the blue PCIE x16 (PCI_EX2) slot supports PCIE x8 speed

c. if you intend to install two expansion cards into both PCIE x16

slots, these two PCIE x16 lanes will auto arrange from x16/ x0

to x8/ x8

d. if you intend to install only One expansion card, make sure

that the expansion card is installed on the mazarine PCIE x16

slot (PCI_EX1)

- 1 PCI Express x 1 slot

- 2 PCI slots

Form Factor

- ATX (30.5cm X 22.0 cm)

Mounting

- 6 mounting holes

En-4

MS-7388 Mainboard

Quick Components Guide of K9A2 CF Series

(MS-7388v1.X) Mainboard

4

En-9

6 En-9

7

En-10

21

En-15

8

En-10

9

En-10

4

En-9

24

En-16

H En-20

F

En-19

G

En-19

Q

En-20

K En-20

L En-20

N En-20

En-20

I

J

En-20

M En-20

A

En-18

C

En-18

H

En-20

En-5

1

4

En-9

3 En-7

22

En-15

5

En-9

12

En-11

11

En-11

10

En-11

28

En-17

15 En-12

14 En-12

29 En-17

30

En-17

En-5

English

The mainboard supports AMD

®

processor. The mainboard uses a CPU socket called

Socket AM2/AM2+ for easy CPU installation. If you do not have the CPU cooler, consult

your dealer before turning on the computer.

For the latest information about CPU, please visit http://global.msi.com.tw/index.php?

func=cpuform

1

Central Processing Unit: CPU

CPU Installation Procedures for Socket AM2/ AM2+

1.Please turn off the power and unplug the power cord be-

fore installing the CPU.

2.Pull the lever sideways away from the socket. Make sure to

raise the lever up to a 90-degree angle.

3.Look for the gold arrow of the CPU. The gold arrow should

point as shown in the picture. The CPU can only fit in the

correct orientation.

4.If the CPU is correctly installed, the pins should be com-

pletely embedded into the socket and can not be seen. Please note that any

violation of the correct installation procedures may cause permanent damages to

your mainboard.

5.Press the CPU down firmly into the socket and close the lever. As the CPU is likely to

move while the lever is being closed, always close the lever with your fingers press-

ing tightly on top of the CPU to make sure the CPU is properly and completely

embedded into the socket.

Gold arrow

Correct CPU

placement

Important

Overheating

Overheating will seriously damage the CPU and system. Always make sure the

cooling fan can work properly to protect the CPU from overheating. Make sure

that you apply an even layer of thermal paste (or thermal tape) between the CPU

and the heatsink to enhance heat dissipation.

Replaceing the CPU

While replacing the CPU, always turn off the ATX power supply or unplug the

power supply’s power cord from the grounded outlet first to ensure the safety of

CPU.

Overclocking

This mainboard is designed to support overclocking. However, please make

sure your components are able to tolerate such abnormal setting, while doing

overclocking. Any attempt to operate beyond product specifications is not

recommended. We do not guarantee the damages or risks caused by inad-

equate operation or beyond product specifications.

En-6

MS-7388 Mainboard

Installing CPU Cooler Set

When you are installing the CPU, make sure the CPU has a heat sink and a cooling

fan attached on the top to prevent overheating. If you do not have the CPU cooler,

consult your dealer before turning on the computer.

1.Position the cooling set onto the retention mechanism. Hook one end of the clip to

hook first.

2.Then press down the other end of the clip to fasten the cooling set on the top of the

retention mechanism. Locate the Fix Lever and lift up it .

3.Fasten down the lever.

4.Attach the CPU Fan cable to the CPU fan connector on the mainboard.

Fixed Lever

Important

Mainboard photos shown in this section are for demonstration of the CPU/ cooler

installation only. The appearance of your mainboard may vary depending on the

model you purchase.

En-7

English

Memory

DDR

Specification : 184-pin, 2.5v.

Single channel definition : All DIMM slots are GREEN color.

Dual channels definition : DIMM slot(s) on Channel A are marked in GREEN color.

DIMM slot(s) on Channel B are marked in Purple color.

DDR2

Specification : 240-pin, 1.8v.

Single channel definition : All DIMM slots are GREEN color.

Dual channels definition : DIMM slot(s) on Channel A are marked in GREEN color.

DIMM slot(s) on Channel B are marked in Orange color.

64x2=128 pin 56x2=112 pin

40x2=80 pin 52x2=104 pin

2

3

Important

- DDR2 memory modules are not interchangeable with DDR and the DDR2 stan

dard is not backwards compatible. You should always install DDR2 memory

modules in the DDR2 DIMM slots.

- In Dual-Channel mode, make sure that you install memory modules of the same

type and density in different channel DIMM slots.

- To enable successful system boot-up, always insert the memory modules into the

DIMM1 first.

En-8

MS-7388 Mainboard

Installing Memory Modules

You can find the notch on the memory modules and the volt on the DIMM slots. Follow

the procedures below to install the memory module properly.

1.The memory modules has only one notch on the center and will only fit in the right

orientation.

2.Insert the memory module vertically into the DIMM slot. Then push it in until the

golden finger on the memory module is deeply inserted in the DIMM slot.

3.The plastic clip at each side of the DIMM slot will automatically close.

Important

You can barely see the golden finger if the memory module is properly inserted in

the DIMM slot.

Volt

Notch

En-9

English

Connectors, Jumpers, Slots

Floppy Disk Drive Connector

This connector supports 360KB, 720KB, 1.2MB, 1.44MB or 2.88MB floppy disk drive.

5

Fan Power Connectors

The fan power connectors support system cooling fan with +12V. The CPU FAN supports

Smart FAN function. When connect the wire to the connectors, always take note that the

red wire is the positive and should be connected to the +12V, the black wire is Ground

and should be connected to GND. If the mainboard has a System Hardware Monitor

chipset on-board, you must use a specially designed fan with speed sensor to take

advantage of the fan control.

SYS FAN/ NB FAN/

POWER FAN

SENSOR or NC

+12V

GND

4

IDE connector

This connector supports IDE hard disk drives, optical disk drives and other IDE devices.

6

CPU FAN

SENSOR

+12V

GND

Control

Important

1.Please refer to the recommended CPU fans at processor’s official website or

consult the vendors for proper CPU cooling fan.

2.CPUFAN supports fan control. You can install Dual Core Center utility that

will automatically control the CPU fan speed according to the actual CPU

temperature.

3. Fan cooler set with 3 or 4 pins power connector are both available for CPUFAN.

Important

If you install two IDE devices on the same cable, you must configure the drives

separately to Master/ Slave mode by setting jumpers. Refer to IDE device’s docu-

mentation supplied by the vendors for jumper setting instructions.

En-10

MS-7388 Mainboard

Front Panel Connectors

These connectors are for electrical connection to the front panel switches and LEDs.

The JFP1 is compliant with Intel

®

Front Panel I/O Connectivity Design Guide.

IEEE1394 Connector (Green)

This connector allows you to connect the IEEE1394 device via an optional IEEE1394

bracket.

8

9

Serial ATA Connector

This connector is a high-speed Serial ATA interface port. Each connector can connect to

one Serial ATA device.

7

Important

Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data

loss may occur during transmission.

IEEE1394 Bracket

(Optional)

JFP2

JFP1

9

Reset

Switch

Power

Switch

1

2

HDD

LED

Power

LED

10

7

8

Power

LED

Speaker

1

2

1

2

9

10

T

P

A

-

G

r

o

u

n

d

T

P

B

-

C

a

b

l

e

p

o

w

e

r

G

r

o

u

n

d

T

P

A

+

G

r

o

u

n

d

T

P

B

+

C

a

b

l

e

p

o

w

e

r

K

e

y

(

n

o

p

i

n

)

En-11

English

Front USB Connector (Yellow)

This connector, compliant with Intel

®

I/O Connectivity Design Guide, is ideal for con-

necting high-speed USB interface peripherals such as USB HDD, digital cameras, MP3

players, printers, modems and the like.

Important

Note that the pins of VCC and GND must be connected correctly to avoid possible

damage.

10

Front Panel Audio Connector (Azalia Spec)

This connector allows you to connect the front panel audio and is compliant with Intel

®

Front Panel I/O Connectivity Design Guide.

12

USB 2.0 Bracket

(Optional)

11

S/PDIF-Out Connector (Optional, for HDMI graphics card only)

This connector is used to connect S/PDIF (Sony & Philips Digital Interconnect Format)

interface for digital audio transmission to the HDMI graphics card.

U

S

B

O

C

10

1

2

V

C

U

S

B

0

-

U

S

B

0

+

G

N

D

K

e

y

(

n

o

p

i

n

)

V

C

U

S

B

1

-

U

S

B

1

+

G

N

D

9

SPDIFO GND

1

2

9

10

M

I

C

_

L

M

I

C

_

R

L

I

N

E

o

u

t

_

R

F

r

o

n

t

_

J

D

L

I

N

E

o

u

t

_

L

G

r

o

u

n

d

P

r

e

s

e

n

c

e

#

M

I

C

_

J

D

N

C

(

N

o

p

i

n

)

L

I

N

E

o

u

t

_

J

D

En-12

MS-7388 Mainboard

CD-In Connector

This connector is provided for external audio input.

Chassis Intrusion Connector

This connector connects to the chassis intrusion switch cable. If the chassis is opened,

the chassis intrusion mechanism will be activated. The system will record this status and

show a warning message on the screen. To clear the warning, you must enter the BIOS

utility and clear the record.

15

14

1

2

CINTRU

GND

Front Panel Audio Connector (AC97 Spec)

This connector allows you to connect the front panel audio and is compliant with Intel

®

Front Panel I/O Connectivity Design Guide.

1

2

910

AUD_MIC

AUD_MIC_BIAS

AUD_FPout_R

HP_ON

AUD_FPout_L

AUD_GND

AUD_VCC

AUD_RET_R

Key

AUD_RET_L

13

Important

If you don’t want to connect to the front audio header, pins 5 & 6, 9 & 10 have

to be jumpered in order to have signal output directed to the rear audio ports.

Otherwise, the Line-Out connector on the back panel will not function.

GND

L

R

La page charge ...

MSI G52-73881X4 Le manuel du propriétaire

Ce manuel convient également à

MSI G52-73881X4 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents