Winmate R15L600-MRA3FP Manuel utilisateur

Marine Display

15”/19”/24”/26” Flat PCAP Touchscreen

ECDIS Series

Model No.:

R15L600-MRA3FP

R19L300-MRA1FP

W24L100-MRA1FP

W26L100-MRA1FP

User Manual

Version 1.0

Document Part Number: 9152111I101E

ii

Preface

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits

and/or software described or contained in this manual in order to improve design and/or

performance. We assume no responsibility or liability for the use of the described

product(s)conveys no license or title under any patent, copyright, or masks work rights to

these products, and make no representations or warranties that these products are free from

patent, copyright, or mask work right infringement, unless otherwise specified. Applications

that are described in this manual are for illustration purposes only. We make no

representation or guarantee that such application will be suitable for the specified use

without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and

workmanship defects for a period of one year from the invoice date. If the customer discovers

a defect, we will, at his/her option, repair or replace the defective product at no charge to the

customer, provide it is returned during the warranty period of one year, with transportation

charges prepaid. The returned product must be properly packaged in its original packaging to

obtain warranty service. If the serial number and the product shipping data differ by over 30

days, the in-warranty service will be made according to the shipping date. In the serial

numbers the third and fourth two digits give the year of manufacture, and the fifth digit

means the month (e. g., with A for October, B for November and C for December).

For example, the serial number 1W14Axxxxxxxx means October of year 2014.

iii

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

iv

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to

alert you to the potential for hardware damage or personal injury. These are Notes, Important,

Cautions, and Warnings. The following is an example of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and explains how to avoid

the potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et explique

comment éviter le problème potentiel.

WARNING!/AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from electrical hazards and

how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur des

emplacements électriques et comment éviter ces problèmes.

ALTERNATING CURRENT / MISE À LE TERRE!

The Protective Conductor Terminal (Earth Ground) symbol indicates the potential risk

of serious electrical shock due to improper grounding.

Le symbole de Mise à Terre indique le risquépotential de choc électrique grave à la

terre incorrecte.

v

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis whenever

you work with the hardware. Do not make connections while the power is

on. Sensitive electronic components can be damaged by sudden power

surges. Only experienced electronics personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous

travaillez sur celui-ci. Ne pas brancher de connections lorsque l’alimentation

est présente. Des composantes électroniques sensibles peuvent être

endommagées par des sauts d’alimentation. Seulement du personnel

expérimentédevraitouvrirces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before touching the CPU

card. Modern electronic devices are very sensitive to static electric charges. As

a safety precaution, use a grounding wrist strap at all times. Place all

electronic components in a static-dissipative surface or static-shielded bag

when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge statique

avant de toucher la carte CPU. Les équipements électroniques moderns sont

très sensibles aux décharges d’électricité statique. Toujours utiliser un

bracelet de mise à la terre comme précaution. Placer toutes les composantes

électroniques sur une surface conçue pour dissiper les charge, ou dans un sac

anti-statique lorsqu’elles ne sont pas dans le chassis.

vi

Safety Precautions

For your safety, carefully read all the safety instructions before using the device and

follow all warnings and cautions marked on the product. Keep this user manual for future

reference.

 Always disconnect this equipment from any AC outlet before cleaning. Do not use

liquid or spray detergents for cleaning. Use a damp cloth.

 For pluggable equipment, the power outlet must be installed near the equipment

and must be easily accessible.

 Keep this equipment away from humidity.

 Put this equipment on a reliable surface during installation. Dropping it or letting it

fall could cause damage.

 The openings on the enclosure are for air convection and to protect the equipment

from overheating.

CAUTION/ATTENTION

Do not cover the openings!

Ne pas couvrir les ouvertures!

 Before connecting the equipment to the power outlet make sure the voltage of the

power source is correct.

 This product is equipped with a 3-wire grounding type plug, a plug having a third

(grounding) pin. This plug will only fit into a grounding-type power outlet. This is a

safety feature. If you are unable to insert the plug into the outlet, contact your

electrician to replace your obsolete outlet (For AC version only).

 Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

 If the equipment is not used for a long time, disconnect it from the power source to

avoid damage by transient over-voltage.

 Never pour any liquid into an opening. This could cause fire or electrical shock.

 Never open the equipment. For safety reasons, only qualified service personnel

should open the equipment.

 All cautions and warnings on the equipment should be noted.

*Let service personnel to check the equipment in case any of the following problems

appear:

o The power cord or plug is damaged.

o Liquid has penetrated into the equipment.

o The equipment does not work well or you cannot get it to work according

to the user manual.

o The equipment has been dropped and damaged.

o The equipment has obvious signs of breakage.

vii

 Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the

equipment.

CAUTION/ATTENTION

Use the recommended mounting apparatus to avoid risk of injury.

Utiliser l’appareil de fixation recommandé pour éliminer le risque

de blessure.

WARNING!/AVERTISSEMENT!

Only use the connection cords that come with the product. When

in doubt, please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le

produit. Si vousdoutez de leur provenance, contactez le

manufacturier.

WARNING!/AVERTISSEMENT!

Always ground yourself against electrostatic damage to the

device.

Toujours vérifier votre mise à la terre afin que l’équipement ne se

décharge pas sur vous.

 Cover workstations with approved anti-static material. Use a wrist strap

connected to a work surface and properly grounded tools and equipment.

 Use anti-static mats, heel straps, or air ionizer for added protection.

 Handle electrostatic-sensitive components, PCB’s and assemblies by the case or

the edge of the board.

 Avoid contact with pins, leads, or circuitry.

 Turn off power and input signals before inserting and removing connectors or test

equipment.

 Keep the work area free of non-conductive materials, such as ordinary plastic

assembly aids and Styrofoam.

 Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that

are conductive.

 Always put drivers and PCB’s component side on anti-static foam.

viii

Important Information

Countries/ Area

Symbol

This equipment complies with essential requirements of:

USA

FCC Part 15 Subpart B Regulations Class B

European Union

Electromagnetic Compatibility Directive(2014/30/EU)

Low Voltage Directive (2014/35/EU)

Restrictions of the use of certain hazardous substances

(RoHS) Directive (2011/65/EU)

Internationally

Marine

IEC 60945 4

th

Edition

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at him own expense.

ix

European Union

This equipment is in conformity with the requirement of the following EU

legislations and harmonized standards. Product also complies with the Council

directions

Electromagnetic Compatibility Directive (2014/30/EU)

 EN55024: 2010 EN 55022: 2010 Class B

o IEC61000-4-2: 2009

o IEC61000-4-3: 2006+A1: 2007+A2: 2010

o IEC61000-4-4: 2012

o IEC61000-4-5: 2014

o IEC61000-4-6: 2013

o IEC61000-4-8: 2010

o IEC61000-4-11: 2004

 EN55022: 2010/AC:2011

 EN61000-3-2:2014

 EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

 EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

x

About This User Manual

This User Manual provides information about using the Winmate® ECDIS Marine Display.

The documentation set for the Winmate® ECDIS Marine Display provides information for specific

user needs, and includes:

 ECDIS Marine Display Quick Start Guide - describes how to get the display up and running.

 ECDIS Marine Display User Manual – contains detailed description on how to use the

display, its components and features.

NOTE:

Some pictures in this guide are samples and can differ from actual product.

Model Number Naming Rule

R19LXXX-MRXXFP

Item

Description

R

Panel Type

19

Panel Size

LXXX

Product Size

MR

Mechanical Type

XX

Panel Model

FP

Touch Type

Revision History

Version

Date

Note

Author

1.0

22-Sep-2016

Initial document release

Austin Chang

xi

Contents

Preface ........................................................................................................................................ ii

About This User Manual ............................................................................................................... x

1 Introduction .............................................................................................................................. 1

1.1 Product Features .................................................................................................................. 1

1.2 Packing List ........................................................................................................................... 2

1.3 Appearance and Layout ....................................................................................................... 3

1.3.1Appearance and Layout 15” ....................................................................................... 3

1.3.2 Appearance and Layout 19” ...................................................................................... 4

1.3.3 Appearance and Layout 24” and 26” ........................................................................ 5

1.4 OSD Control Keys ................................................................................................................. 6

1.5 ECDIS Mode Indicators ......................................................................................................... 7

1.6 Dimensions ........................................................................................................................... 8

1.6.1 Dimensions 15” ......................................................................................................... 8

1.6.2 Dimensions 19” ......................................................................................................... 9

1.6.3 Dimensions 24” ....................................................................................................... 10

1.6.4 Dimensions 26” ....................................................................................................... 11

2 Mounting Solutions ................................................................................................................. 13

2.1 Cable Mounting Considerations ........................................................................................ 13

2.2 Safety Precautions ............................................................................................................. 14

2.3 Mounting Guide ................................................................................................................. 15

2.3.2 Panel/ Flush Mount ................................................................................................. 15

2.3.4 VESA Mount ............................................................................................................. 16

3 Getting Started........................................................................................................................ 19

3.1 Powering On ....................................................................................................................... 19

3.1.1 AC Adapter Components ......................................................................................... 19

3.1.2 Connecting the Power ............................................................................................. 20

3.2 Connecting Data Transmission Cables ............................................................................... 22

3.2.1 DC Input Connector ................................................................................................. 22

3.2.2 RS-232Connector (For Remote Control) ................................................................. 22

3.2.3 USB 2.0 Connector (For Touch) ............................................................................... 22

xii

3.2.4 DVI Connector ......................................................................................................... 23

3.2.5 HDMI 2.0 Connector ................................................................................................ 23

3.2.6 HDMI 1.4 Connector ................................................................................................ 24

3.2.7 Display Port 1.2 Connector ...................................................................................... 24

3.2.8 VGA Connector ........................................................................................................ 25

3.3 Turning On and Off ............................................................................................................ 26

3.3.1 Turning On ............................................................................................................... 26

3.3.2 Turning Off the Screen ............................................................................................ 26

4 On-Screen Display (OSD) Control ............................................................................................. 28

4.1 OSD Control Key and LED Indicators .................................................................................. 28

4.3 OSD Menu Navigation ........................................................................................................ 28

4.3.1 Display ..................................................................................................................... 29

4.3.2 Adjust ....................................................................................................................... 30

4.3.3 Audio ....................................................................................................................... 30

4.3.4 Multi-Display ........................................................................................................... 31

4.3.5 OSD .......................................................................................................................... 32

4.3.6 Advanced LED Light ................................................................................................. 32

4.4 ECDIS Mode Brightness Adjustment .................................................................................. 34

4.3.1 Introduction ............................................................................................................. 34

4.3.2 Switching to DAY Mode ........................................................................................... 35

4.3.3 Switching to DUSK Mode ......................................................................................... 35

4.3.4 Switching to NIGHT Mode ....................................................................................... 35

5 Maintenance ........................................................................................................................... 37

5.1 Cleaning the Display Screen ............................................................................................... 37

5.2 Cleaning the Casing ............................................................................................................ 37

6 Technical Support .................................................................................................................... 39

6.1 Troubleshooting ................................................................................................................. 39

6.2 Problem Report Form ........................................................................................................ 40

6.3 Technical Support .............................................................................................................. 41

6.3.1 Winmate Download Center ..................................................................................... 41

6.3.2 Winmate File Share ................................................................................................. 41

xiii

Appendix A Technical Specifications ........................................................................................... 43

A1 Display Technical Specifications ......................................................................................... 43

Appendix B PCAP Touchscreen ................................................................................................... 46

B1 Technology Overview ......................................................................................................... 46

B2 Touchscreen Technical Specifications ................................................................................ 46

Appendix C Available Input Signals ............................................................................................. 48

ECDIS Marine Display

1

Introduction

This chapter gives you product overview,

describes features and hardware

specification. You will find all accessories

that come with your device in the packing

list. Mechanical dimensions and drawings

included in this chapter.

User Manual Chapter 1 Introduction

ECDIS Marine Display

1

1 Introduction

Congratulations on purchasing Winmate® ECDIS Marine Series Display. The design meets

the requirements of industrial marine standards, including IEC60945 4th Edition, DNV2.4,

IACS E10.

Modern marine sector requires durable devices that can withstand long periods

submersed in water. Winmate® ECDIS Marine Series Display is suitable for navigation,

ship automation, and surveillance, rugged industrial and light military applications.

Flat easy-to-clean surface delivers aesthetically pleasing look. Due to dimmable backlight

the Display suitable for high and low ambient light conditions. You can mount the

Display on the bridge of a ship. The Display features user-friendly and resistant to

scratches PCAP touch-screen. All models sealed with front IP 66 dust and water proof.

1.1 Product Features

Winmate® ECDIS Series Marine Display offers the following features:

 Hyper Dimming

 Anti-corrosion IP66 Proof

 Projective capacitive multi-touch screen

 Edge-to-edge narrow bezel design

 Color calibrated for ECDIS compliance

 Capacitive touch keys for quick function access and display control

(Support ECDIS DAY, DUSK, and NIGHT mode switching)

 Support capacitive touch key lock / touchscreen lock function

 Compliant with marine standards (DNV2.4, IEC 60945 4th, IACS-E10)

Approved Marine Display

Winmate’s Marine product line designed to follow IEC-60945 Maritime Navigation and

Radio-communication Equipment and Systems requirements. Marine Display series

line varies in screen size from 19 inches to 26 inches. By testing for usability in a ship’s

wheelhouse during different ambient light conditions we developed products that

meet demands in maritime applications especially for navigation, ship automation and

maritime surveillance.

User Manual Chapter 1 Introduction

ECDIS Marine Display

2

1.2 Packing List

Carefully remove the box and unpack your device. Please check if all the items listed

below are inside your package. If any of these items are missing or damaged contact us

immediately.

Standard factory shipment list:

Display

User Manual

Quick Start Guide

(Hardcopy)

**M4 x 12 black

screw bolts

AC Adapter

(Input 100-240V AC

Output: 12V/ 80W)

Power Cord

3pin Terminal

Block

2 x HDMI Cable

(HDMI 19pin Male

to 19pin Male)

1 x VGA Cable

(D-SUB 15pin Male to

15pin Male)

1 x Display Port

Cable

(Display port 20pin

Male to 20pin

Male)

1 x RS232 Cable

(D-SUB 9pin Male

to 9pin Female)

1 x DVI Cable

(DVI-D 24pin Male

to 24pin Male)

*AC adapter, 3-pin terminal block, and power cord shipped with Display for testing purposes only.

**Notice: Screw bolts provided by Winmate only to be used to screw the display onto a console

from the rear side. If you prefer your own bolts, please make sure to use M4 and 30mm in length.

User Manual Chapter 1 Introduction

ECDIS Marine Display

3

1.3 Appearance and Layout

This section contains appearance of the Display and I/O layout.

1.3.1Appearance and Layout 15”

No

Description

No

Description

①

USB (Touchscreen)

⑥

Display Port 1.2

②

RS232 (Remote control)

⑦

VGA

③

DVI-D

⑧

Audio

④

HDMI 1.4

⑨

DC Input

⑤

HDMI 2.0

User Manual Chapter 1 Introduction

ECDIS Marine Display

4

1.3.2 Appearance and Layout 19”

No

Description

No

Description

①

USB (Touchscreen)

⑥

Display Port 1.2

②

RS232 (Remote control)

⑦

VGA

③

DVI-D

⑧

Audio

④

HDMI 1.4

⑨

DC Input

⑤

HDMI 2.0

User Manual Chapter 1 Introduction

ECDIS Marine Display

5

1.3.3 Appearance and Layout 24” and 26”

No

Description

No

Description

①

USB (Touchscreen)

⑥

Display Port 1.2

②

RS232 (Remote control)

⑦

VGA

③

DVI-D

⑧

Audio

④

HDMI 1.4

⑨

DC Input

⑤

HDMI 2.0

User Manual Chapter 1 Introduction

ECDIS Marine Display

6

1.4 OSD Control Keys

Capacitive touch keys and ECDIS mode indicators located on the front of your Display.

Capacitive Touch Keys

Touch Key

Function

Description

Power

Power on/off control

Brightness

To increase brightness of panel

Brightness

To decrease brightness of panel

OSD/ Enter

Opens OSD Menu or performs Enter

button function

ECDIS Key/ ESC

Switching ECDIS standard range mode

(Day / Dust / Night mode) or performs

ESC button function

La page charge ...

Winmate R15L600-MRA3FP Manuel utilisateur

Ce manuel convient également à

Winmate R15L600-MRA3FP Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents