Lenco xemio 136 1gb Le manuel du propriétaire

Xemio-106/116/126/136

User's Manual

Notice: Thank your for choosing our product! Please read the user's manual

carefully to ensure proper operation.

1

Content

Precautions

System requirement

1. Installation instruction

1.1 Installing the driver

1.2 Installing the battery

2. Connecting/ downloading/ disconnecting

2.1 Connecting a PC

2.2 Downloading MP3 music

2.3 Removing USB device

3. Basic operation

3.1 Buttons and functions

3.2 Power on/off

3.3 Main menu setup

4. MP3 Player Operation

4.1Playing music

4.2 Voice mode

4.2.1 Playing voice

4.2.2 Recording

4.3 Function Setting

4.3.1 Setting EQ mode

4.3.2 Setting play mode

4.3.3 Setting contrast

2

4.3.4 Setting backlight

4. 3.5 Setting power set

4.3.6 Setting recording

4.3.7 Setting language

4.3.8 Exit

4.4 Intro

4.5 About

4.6 Folder function

4.7 Exit

5. A-B loop playing

6. Lock function

Lyric sync

USB mode

FAQ

Technical specifications

3

Precautions

1) Never use the player during driving or operating other vehicles to avoid traffic

accident, which is also restricted by the law in some districts. Even on foot, it is still

dangerous to listen in extremely high volume especially during crossing the street.

Wherever with potential risks, please stop using the player for safety purpose.

2) Please insert the earphone before powering on the player, which can not only

avoid damaging the earphone but keep the player in good condition.

3) Keep the player clean and away from heat source or direct sunlight, dirty, humid or

rainy place.

4) If the surface is dirty, please clean with soft cloth dipped with clean water or soft

abluent. Never clean the case with alcohol or diluents.

5) Never use the player in rather dry environment to avoid static.

6) Never disconnect the player from PC abruptly during downloading, uploading and

formatting to avoid application failure.

7) When the player is used as removable disk, please follow the proper file

download and upload procedures. Our company resumes no responsibility for any

file lost due to improper operation.

4

System requirement

System requirement of MP3 player:

Microsoft Windows 98/2000/Me/XP

Pentium 200MHZ or above.

USB

120MB hard disk space

Mouse installed

CD-ROM drive

5

1. Installation instruction

1.1 Installing driver only for Windows 98 (The driver can be downloaded from our

website: www.lenco-audiovideo.com. This driver is not required for Windows ME

or above)

a. Connect the MP3 Player to the USB port of a PC, "Find new hardware" appears

on the screen, then click "Search latest driver for this device", and then click

"Next".

b. Select "Look in" to select the directory where you unzipped the driver files, and

then click Yes.

c. PC will install the driver for Windows 98 automatically.

1. 2 Installing battery

 Install one #7 1. 5V alkaline battery properly upon indicator on the play.

 Press and hold the  button to power the player on and enter the MP3

standby mode.

2. Connecting and downloading

2.1 Connecting a PC

Before operation, please verify the player is powered off with one end of the USB

cable came with the system inserted into PC and another end into the MP3 player.

2. 2 Downloading MP3 music

 Connect MP3 player to the USB port of a PC

 Download MP3 music to MP3 player.

6

Data transmitting

Notice: If not all the downloaded files can be played, please verify there are not

more than 500 files on the MP3 player. This is the maximum capacity.

2.3 Removing the USB device

 Double click the Safely Remove Hardware icon on the taskbar:

 From the Safely Remove Hardware screen, highlight "USB Mass Storage

Device" item, and then click the "Stop” button. The "Stop Hardware Device" window

appears on the screen as shown in the picture below.

7

 Click “OK”. After the "Safe to Remove Hardware" window appears, the

player can be safely disconnected from the PC.

Notice: Never unplug the USB cable when transmitting data with PC to avoid

damaging the Player. After data transmitting, please do not disconnect the player

from your PC until "Device can now safely be removed" appears. While using USB

function, all other buttons will be nonfunctional.

In case of application lost or I/O error and power on issues caused by improper

operations, please refer to the FAQ.

3. Basic operation

3. 1 Buttons and functions

1) Play/Pause/Stop

2)

Menu/Last/Next

3) Hold

4) Earphone

5) (A-B) Repeat/REC

6) Volume+

7) Volume–

8

3.2 Power on/off

From power off mode, press the  button to enter the MP3 standby mode.

Press the button 3 seconds in any mode and the player will save the data and

enter power off mode.

MP3 standby mode

Notice: If the player is powered off while in standby mode or while playing, all the

settings will be lost!

3.3 Main menu setup

 From standby or playing mode, you can press the MENU button to enter the

main menu.

 Push the ׀ or ׀ button to select: Play music, Voice, Setting, Intro, About,

Folder and Exit; you can press the MENU button to enter the desired submenu.

4. How to use the MP3 player

4.1Playing music

a) From MP3 standby mode, you can press the button to play MP3 music and

press the  button again to pause. To resume playing, please press the

button a third time.

9

Play Pause

b) From play or pause mode, press and hold the button for 2 seconds, the

player will return to the MP3 standby mode, press and hold the button again, it

will repeat step "a)".

c) From MP3 standby or play mode, you can push the ׀ or ׀ button to select

the previous or next song.

d) From STOP mode, you can push and hold the ׀or׀ button to find your

desired music quickly.

e) From PLAY mode, you can press the ׀or׀ button to fast backward or

forward in the current song.

f) From PLAY mode, press the V + or V-button to adjust the volume.

g) From MP3 standby, play and pause mode, press and hold the  button for 3

seconds, the player will save the data and enter the power off mode.

4.2. Setting the voice mode

4.2.1 Playing voice

a) From MP3 mode or voice standby mode, you can press the MENU button to enter

the main menu. To enter the playing voice mode, please push the ׀ or ׀ button to

select Voice and press the  button. You can press the  button to play, and

press this button again to pause. To resume playing, please press this button a third

time.

10

b) Voice playing mode includes: Normal, single play, repeat all.

Normal Single play

Repeat all Shuffle repeat

c) From voice standby or play mode, you can press the ׀ or ׀ button to select

previous or next voice file.

d) From STOP status, you can push and hold the ׀ or׀ button to find your desired

music quickly.

e) From Play mode, you can push and hold ׀ or ׀ button to fast backward or

forward in this voice file.

From voice standby mode, press the  button for 2 seconds, the player will enter the

MP3 standby mode.

Note: The EQ selection will be unavailable when playing voice files.

4.2.2 Recording

From MP3 mode or voice standby mode, press the A-B/REC button for 2 seconds to

begin recording, and repress the A-B/REC button to stop. You can press the 

button to play the recorded voice, and press this button again to pause. To resume

playing, please press this button a third time.

11

Pause recording Stop recording

Notice: You can record a maximum of 999 voice files.

4. 3 Function Setup

From MP3 mode or voice standby mode, you can press the MENU button to enter

the main menu, and push the ׀ or ׀ button to select Setting and press the 

button to confirm. The function setting includes: EQ mode, Play mode,Contrast,

Backlight, Power set, Record set ,Language, Exit. You can press the MENU button

to save the selected setting mode.

4.3.1 Setting EQ mode

Push the ׀or ׀ button to select the EQ mode: Normal, rock, jazz, classical,

pop and bass. Press the MENU button to save the selected EQ setting.

4.3.2 Setting Play mode

Push the ׀ or ׀ button to select the playing mode, including: Normal, repeat

one, repeat all and shuffle repeat. You can press the MENU button to save the

selected play mode.

12

Normal Repeat one

Repeat all Shuffle repeat

4. 3. 3 Contrast Setup

Push the ׀ or ׀ button to adjust the contrast of the LCD screen. Press the MENU

button to save the selected setting.

4.3.4 Adjusting Backlight

Push the ׀ or ׀ button to select the desired backlight setting: Off, 5s, 10s, on.

Press the MENU button to save the selected setting.

4.3.5 Power set Setup

Push ׀ or ׀ button to select the desired Power set: 2m, 10m, 30m, off. Press the

MENU button to save the selected shutdown time.

13

4.3.6 Recording Setup

Push ׀ or ׀ button to select the desired recording setting: 8000Hz, 11000Hz,

16000Hz, 22000Hz. Press the MENU button to save the selected setting.

4.3.7 Language Setup

Push the ׀or׀ button to select from the following languages:German, English,

French, Spanish, Poland, Danish, Portuguese, Italian, Dutch, Finnish, and Swedish.

Press the MENU button to save the selected language.

4.3.8 Exit

Return to upper menu.

4.4 Intro

From MP3 mode or voice standby mode, you can press the MENU button to enter

the main menu, and push the ׀ or ׀ button to select the intro function, and then

press the MENU button to begin. During intro, it will play the initial 10 seconds of

each music file and then skip to the next file. You can press the  button to exit.

14

4.5 About

From MP3 mode or voice standby mode, you can press the MENU button to enter

the main menu, and push the ׀ or ׀ button to select the about function, and then

press the MENU button to view the total memory capacity and the memory currently

available.

128 068

4.6 Folder function

From or voice standby mode, you can press the MENU button to enter the main

menu, and push the ׀ or ׀ button to select the folder function, and then press the

MENU button to confirm.

You can push and hold the MENU button to browse the file, and push the ׀ or  to

select the desired one.

Press the MENU button again, you can play or delete music.

Note: You can not view the record folder and recorded files while in play music mode,

this is only possible in play voice mode. )

15

4.7 Exit

Return to MP3 mode. Note: From the SETUP mode, you can press the  button

to exit the SETUP mode quickly.

5. A-B Play Mode

From MP3 or voice mode:

1) Press the A-B/REC button to select starting point A;

2) Press the A-B/REC button to select end point B, then it will repeat between A-B.

3) Press the A-B/REC button again to cancel setting and resume playing MP3 or

voice.

6. Lock function

From MP3 and voice standby/ play/ pause/ record mode, you can push the HOLD

switch in the direction of the arrow to lock all the other buttons. A Lock icon will be

visible on the LCD screen. If you want to unlock the buttons, please push the HOLD

switch in the opposite direction of the arrow.

Lyric sync:

This player supports lyric sync function.

Notice: The lyric file name must be the same as the corresponding music file with

the .LRC suffix. It must also be saved in the same directory. Only the lyrics with time

indication will be displayed properly.

USB mode

Plug the Player into the USB port of a PC, corresponding icons will appear on the

LCD screen.

LCD screen may display corresponding icons when transmitting files between the

16

Player and PC.

For information on how to update the software or format the removable disk, please

refer to the website.

FAQ

Problem Causes Solution

No display after

pressing the power

button

No battery or battery

low.

Verify the battery is

installed, change battery.

No sound when

playing music.

1. Volume is too low or

there are no music files

in your player.

2. Battery low.

1. Adjust volume or

download file.

2. Change battery

3. MP3 or WMA file is

corrupt.

3. Download the files again.

Can not download

music file after

connection

1. HOLD function is

engaged, the disk is

write protected

2. The USB is not

properly connected to

the PC.

3. Storage directory is

wrong

1. Push the HOLD switch in

the opposite direction.

2. Connect to the USB

interface again and verify

that the PC recognizes the

removable disk.

3. A maximum of 256 folders

or files can be saved in the

root directory (if the file

name is over 8 characters,

the maximum number of

folders or files will decrease

accordin

g

l

y)

If this

17

maximum is exceeded,

please create another

subdirectory in the root

directory before copy.

Can not play the

MP3 file that is

made by user.

The MP3 files are

compressed with a

different compression

rate and format, while

this Player supports

standard compressed

MP3, please do not use

layer one or two

compression.

Download the standard MP3

files again.

PC can not identify

the mp3 player

Improper operation. Format the removable disk.

No response after

pressing button.

HOLD function is

engaged, buttons are

locked

Push the HOLD switch in

the opposite direction.

18

Technical specifications

Bit rate: 32~320Kbps

Adjustable LCD contrast: 0-5

SNR: >85db

Adjustable backlight time: 5s, 10s, on, off

Dynamic range: >80(1KHZ)

Condition of storage: Humidity<90%, normal temperature

Distortion: <0.05%

ID3 information display, blue backlight

USB port: standard USB2.0 full speed

Memory: 128MB/256MB /512MB/1GB

Net weight: <25.8g

Dimension: 88*26*21mm

Working condition: Humidity <85%,-10~40℃

Output: 5mW*2

Auto Shutdown: 2min, 10min, 30min, off

Battery life: >10h, low power waste

Language: German, English, French, Spanish, Poland, Danish, Portuguese, Italian,

Dutch, Finnish, and Swedish.

19

If at any time in the future you should need to dispose of this product please

note that: Waste electrical products should not be disposed of with household waste.

Please recycle where facilities exist. Check with your Local Authority or retailer for

recycling advice. (Waste Electrical and Electronic Equipment Directive)

20

La page est en cours de chargement...

Lenco xemio 136 1gb Le manuel du propriétaire

Lenco xemio 136 1gb Le manuel du propriétaire

dans d''autres langues

Autres documents