Insignia NS-MWPC10K2 Guide d'installation rapide

Insignia
Marque
Insignia
Modèle
NS-MWPC10K2
Taper
Guide d'installation rapide
PACKAGE CONTENTS
• 10 W Two Device Qi Charging Station
• 3 ft. (0.9 m) charging cable with
power adapter
• Quick Setup Guide
FEATURES
• Dual 10 W charging zones (20 W total) power two devices at once
• Flat surface charges a range of devices, including headphones
• Compact design ideal for your nightstand, desktop, or while traveling
• Blue LEDs show that your devices are charging
• Wirelessly charges most Qi-enabled devices
(including Apple® and Samsung®) without cumbersome cords
PRODUCT OVERVIEW
Before using your new product, please read these instructions to prevent any damage.
USING YOUR CHARGING PAD
1 Plug the power adapter into your charging station and into a
power outlet.
2 Place your Qi-enabled device on the center of one of the
charging pads with the screen facing up. The LED is blue when
your device is charging.
Notes: You can charge two devices at the same time.
If the LED is red, your device is not charging.
See “TROUBLESHOOTING” for more information.
CAUTION: Do not place a credit or debit card on a charging pad.
QUICK SETUP GUIDE
10 Watt Two Device
Qi Charging Station
NS-MWPC10K2 / NS-MWPC10K2-C
LED INDICATOR STATUS
TROUBLESHOOTING
Device not charging/LED is red
• Make sure that your device is Qi-enabled.
• Make sure that your charging station is connected to a
working power outlet.
• Make sure that your device is positioned correctly
on the charging pad.
• Make sure that there are no other objects on the charging pads.
• Remove your device’s case. It may be blocking the wireless signal.
LED
Blinking blue
Solid blue
Blue and red both on
Solid red
Blinking red
STATUS
Standby
5W Charging
Quick charging
Insucient input power
Charging error
LED indicators
DC port
Back
Top
COMPATIBILITY
Any Qi-enabled devices
including smartphones,
headphones, smart watches.
NS-MWPC10K2_C_ 20-0032_QSG_V1_EN_Final.ai 1 4/23/2020 10:36:12 AM
Device charges slowly
• Your device may charge more slowly with your charging station
than a charging cable. This is normal behavior.
• Make sure that your device is positioned in the center of a
charging pad.
CAUTION: Only use the cable with the attached power adapter
that came with your charger. Using a dierent cable and adapter
can decrease charging performance or damage your charger.
SPECIFICATIONS
Qi Wireless Charging Pads:
Input: 15 V/1.8 A max.
Output: 10 W max. per charging pad
Dimensions: 7 x 3.5 x 0.4 in. (178 x 90 x 10.6 mm)
AC power adapter:
Input: 100-240V ~ 50/60 Hz 0.7 A
Output: DC 15 V/1.8 A
Charging cable: 3 ft. (0.9 m)
LEGAL NOTICES
FCC Information
FCC Caution:
Changes or modications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection
against harmful interference in a residential installation. This equipment generates, uses, and
can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not
occur in a particular installation. If this equipment does cause harmful interference
to radio or television
reception, which can be determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipement into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC statement: This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator and your
body. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
RSS-Gen statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of
the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
This equipment complies with IC RSS‐102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between the
radiator and your body.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR‐102 établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale
de 20 cm entre le radiateur et votre corps.
V1 ENGLISH 20-0032
SAFETY INFORMATION
• Avoid dropping.
• Do not disassemble.
• Do not place metal objects between devices and the wireless
charging pads.
• Thick protective case (≥ .2 in. [5 mm]) or a case that includes a
magnet or metallic material, may not allow proper charging function.
• Keep wireless charging pad away from any liquid or moisture.
• The maximum ambient temperature during use of this product
must not exceed 113° F (45° C).
•
Do not place this device in re or other excessively hot environments.
• Must use provided adapter for proper function, if not it may be
malfunction.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
1-877-467-4289 (U.S. and Canada)
1-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2020 Best Buy. All rights reserved.
NS-MWPC10K2_C_ 20-0032_QSG_V1_EN_Final.ai 2 4/23/2020 10:36:12 AM
  • Page 1 1
  • Page 2 2

Insignia NS-MWPC10K2 Guide d'installation rapide

Insignia
Marque
Insignia
Modèle
NS-MWPC10K2
Taper
Guide d'installation rapide
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents