Legrand NVP5050NA Mode d'emploi

Marque: Legrand

Modèle: NVP5050NA

Taper: Mode d'emploi

Ce manuel convient également à

Player P5050, P5100, and P5200

Product Manual

P5200

P5100

P5050

Player Portfolio Audio System | Product Manual

TABLE OF CONTENTS

Quick Links . . . . . . . . . . . . . . . . . . . . 3

Overview . . . . . . . . . . . . . . . . . . . . . 4

The Nuvo Player Portfolio Audio System . . . . . . . . 4

Product Features. . . . . . . . . . . . . . . . .5

NV-P5050-xx 3-Zone Player (Ethernet) . . . . . . . . . 5

NV-P5100-xx 3-Zone Player (Ethernet) . . . . . . . . . 6

NV-P5200-xx 3-Zone Player (Ethernet) . . . . . . . . . 7

Setup and Installation . . . . . . . . . . . . . . 8

Network Requirements . . . . . . . . . . . . . . . . . 8

Installing the NV-P5050-xx, NV-P5100-xx,

andNV-P5200-xxPlayers . . . . . . . . . . . . . . . . 8

Connecting Speakers to the NV-P5050-xx,

NV-P5100-xx, and NV-P5200-xxPlayers . . . . . . . . 8

Setting Up Your System Using the App. . . . .9

New System Setup . . . . . . . . . . . . . . . . . . . .9

Using the Nuvo Player App . . . . . . . . . . 11

The Dashboard . . . . . . . . . . . . . . . . . . . . . 11

Music Selection . . . . . . . . . . . . . . . . . . . . . 11

Direct Stream . . . . . . . . . . . . . . . . . . . . . . 12

Line In . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Media Servers. . . . . . . . . . . . . . . . . . . . . . 13

The Settings Menu . . . . . . . . . . . . . . . 14

Add a Nuvo Component . . . . . . . . . . . . . . . . 14

Zones . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Keypads . . . . . . . . . . . . . . . . . . . . . . . . . 15

This App . . . . . . . . . . . . . . . . . . . . . . . . . 16

Music Library . . . . . . . . . . . . . . . . . . . . . . 16

Music Services . . . . . . . . . . . . . . . . . . . . . 17

General . . . . . . . . . . . . . . . . . . . . . . . . . 17

International . . . . . . . . . . . . . . . . . . . . . . 18

Help . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

The Music Share Software . . . . . . . . . . 19

Troubleshooting . . . . . . . . . . . . . . . . 21

Front Panel LEDs . . . . . . . . . . . . . . . . . . . . 21

Not Connected . . . . . . . . . . . . . . . . . . . . . 21

Amazon Alexa Voice Control Integration. . . 23

Prerequisites . . . . . . . . . . . . . . . . . . . . . . 23

Connecting Alexa to Your Legrand Nuvo Player . . . 23

Setup Additional Music Service Providers. . . . . . . 26

Supported Alexa Commands . . . . . . . . . . . . . 26

Speciﬁcations. . . . . . . . . . . . . . . . . . 27

iOS and Android Requirements . . . . . . . . . . . . 27

NV-P5050-xx Ampliﬁer . . . . . . . . . . . . . . . . . 27

NV-P5100-xx Ampliﬁer . . . . . . . . . . . . . . . . . 28

NV-P5200-xx Ampliﬁer . . . . . . . . . . . . . . . . . 29

Regulatory Compliance . . . . . . . . . . . . 30

Player Portfolio Audio System | Product Manual

QUICK LINKS

GENERAL

What is the Nuvo Player Portfolio System?

Where can I can I ﬁnd more information on my Nuvo

Player?

The LED on my Player is ﬂashing. What does that

mean?

Does my Player have international options?

NUVO P5050, P5100, AND

P5200 WIRED PLAYERS

What is the difference between the P5050, P5100,

and P5200 players?

Are there speciﬁc network requirements?

How do I set up my Nuvo Player?

Can I connect speakers to my Nuvo Player?

Where do I ﬁnd the speciﬁcations for my Nuvo

Player?

NUVO PLAYER APP

How do I download the Nuvo Player app?

How do I use my Nuvo Player app?

What play options does my app offer?

SETTINGS MENU

What do all of the options on the settings menu do?

What is a zone?

How do I add a component to my system?

I didn’t register my Player during setup. How can I

STREAMED MUSIC

Can I stream music from a shared network library?

What music services can I stream?

Are there special requirements for direct

streaming?

VOICE INTEGRATION

Can I connect my Alexa device?

Are there special requirements for voice integration

with my Alexa device?

Can I set up multiple music service providers?

What commands will Alexa Support?

Player Portfolio Audio System | Product Manual

OVERVIEW

Welcome to the Nuvo Player Portfolio Audio System!

This system offers you the opportunity to enjoy your favorite music from any room of your home, at any time, with

simplicity of operation. Imagine playing music from your personal library or easily streaming true, high-ﬁdelity music

from the Internet by touching a button on your Apple or Android Wi-Fi-enabled portable device. Use this guide to set

up your audio system and begin ﬁlling your home with beautiful music.

THE NUVO PLAYER PORTFOLIO AUDIO SYSTEM

(Example shows a wireless set-up method.)

Home Network

Control

Wired/Wireless

Single-Zone Players

Professional Multi-Zone

Rack-Mount Players

Tabletop Speakers

Home Theater

Internet

Player Portfolio Audio System | Product Manual

PRODUCT FEATURES

NVP5050XX 3ZONE PLAYER ETHERNET

FRONT PANEL

21 5 643

Item Name Description

1 Standby LED Indicator Indicates if the player is powered on.

2 Power Toggles the power on and off.

3 Zone 1 LED Indicator Indicates the status of Zone 1.

4 Zone 2 LED Indicator Indicates the status of Zone 2.

5 Zone 3 LED Indicator Indicates the status of Zone 3.

6 Zone 3 USB connection port for adding digital music ﬁles to the system music library.

ScansUSB hard drive content and automatically adds it to the library.

BACK PANEL

3 4 51 2

Item Name Description

1 Speaker Outputs* Speaker connection ports. Each zone represents an independent output.

2 Line In/Line Out* 3.5mm stereo analog line-level input/output ports. Each zone represents an

independent input.

3 USB** USB connection ports for sharing music content from a storage device. Each zone

represents an independent input.

4 Ethernet RJ45 port for a wired connection to a network router.

5 AC Universal AC power supply connection port.

* If using a video device as the source for audio output, no perceptible delay in audio occurs when a single player zone is selected. If two or more

player zones are playing the audio from the video source, an audio buffer engages that adds a delay between the audio and video source.

** Not all USB drives are supported natively by the USB port. USB drives should meet USB 2.0 requirements.

Player Portfolio Audio System | Product Manual

NVP5100XX 3ZONE PLAYER ETHERNET

FRONT PANEL

1 2 3 4

Item Name Description

1 Standby LED Indicator Indicates if the player is powered on.

2 Power Toggles the power on and off.

3 TFT Back-Lit Display Displays zone names, status, meta data, and networking information. Touch-capable for setup.

4 Zone 3 USB connection port for adding digital music ﬁles to the system music library. Scans USB hard

drive content and automatically adds it to the library.

BACK PANEL

4 5 6

1 2 3

Item Name Description

1 Speaker Outputs* Speaker connection ports. Each zone represents an independent output.

2 Line In/Line Out* Combination 3.5mm stereo line level and mini TOSLINK optical input/output ports. Each zone

represents an independent input/output.

3 Trigger Out 3.5mm output voltage (5 V, 20 mA) trigger for external equipment. Turns on external amp when

audio is present on zone.

4 USB** USB connection ports for sharing music content from a storage device. Each zone represents an

independent input.

5 Ethernet RJ45 port for a wired connection to a network router.

6 AC Universal AC power supply connection port.

* If using a video device as the source for audio output, no perceptible delay in audio occurs when a single player zone is selected. If two or more

player zones are playing the audio from the video source, an audio buffer engages that adds a delay between the audio and video source.

** Not all USB drives are supported natively by the USB port. USB drives should meet USB 2.0 requirements.

Player Portfolio Audio System | Product Manual

NVP5200XX 3ZONE PLAYER ETHERNET

FRONT PANEL

1 2 3 4

Item Name Description

1 Standby LED Indicator Indicates if the player is powered on.

2 Power Toggles the power on and off.

3 TFT Back-Lit Display Displays zone names, status, meta data, and networking information.

Touch-capable for setup.

4 Zone 3 USB connection port for adding digital music ﬁles to the system music library.

Scans USB hard drive content and automatically adds to the library.

BACK PANEL

4 5 6

1 2 3

Item Name Description

1 Speaker Outputs* Speaker connection ports. Each zone represents an independent output.

2 Line In/Line Out* Combination 3.5mm stereo line level and mini TOSLINK optical input/output ports.

Each zone represents an independent input/output.

3 Trigger Out 3.5mm output voltage (5 V, 20 mA) trigger for external equipment. Turns on external

amp when audio is present on zone.

4 USB** USB connection ports for sharing music content from a storage device. Each zone

represents an independent input.

5 Ethernet RJ45 port for a wired connection to a network router.

6 AC Universal AC power supply connection port.

* If using a video device as the source for audio output, no perceptible delay in audio occurs when a single player zone is selected. If two or more

player zones are playing the audio from the video source, an audio buffer engages that adds a delay between the audio and video source.

** Not all USB drives are supported natively by the USB port. USB drives should meet USB 2.0 requirements.

NOTE: Using multiple P5200 units in a single installation will require dedicated power. Please use one dedicated 15 amp circuit for every two P5200’s installed. The P5200

is capable of creating large amounts of output power. When the P5200 is used at high levels of output, it can generate a substantial amount of heat. The P5200 must be

installed in a manner that allows for adequate dissipation of heat. That may include allowing at least one blank space above and below the unit in a rack conﬁguration as

well as forced-air thermal management such as rack-mounted fans. For further guidance on proper thermal management, please see https://www.middleatlantic.com/

thermal-management-white-paper.aspx.

Player Portfolio Audio System | Product Manual

SETUP AND INSTALLATION

NETWORK REQUIREMENTS

A live Internet connection is necessary for initial setup of your Nuvo Player Portfolio System. For wired Ethernet

connectivity, a minimum 100 MB wired network is necessary for proper communication. Wireless-compatible devices

use dual band 802.11n wireless communication. To ensure that all components are compatible and communicating

correctly, it is strongly suggested that network routers using the older 802.11g protocol be upgraded to support

Multicast and UPnP and be Wi-Fi

Certiﬁed before you proceed with the setup.

When using an Ethernet connection to the system router, or for initial setup, make a connection from your home

network to one Ethernet port ( ) on the device, using a standard Ethernet cable.

INSTALLING THE NVP5050XX, NVP5100XX, ANDNVP5200XXPLAYERS

Connect your rack-mount player to your network by inserting one end of a standard Ethernet cable into an Ethernet

port on the player and use the other end to connect directly to your home network.

IMPORTANT: The NV-P5050-XX, NV-P5100-XX, andNV-P5200-XX are not wireless devices and do not use Wi-Fi for communication.

CONNECTING SPEAKERS TO THE NVP5050XX, NVP5100XX, AND NVP5200XXPLAYERS

NOTE: Speakers can be bookshelf, ﬂoor-standing, or installed in the wall or ceiling. 16-gauge speaker wire is recommended. Up to 12-gauge speaker wire can be used, if desired.

The rack-mount players have three separate zone “euro” style speaker connectors that use a modular plug. To

connect the speakers, perform the following steps:

1. Strip approximately 1/4 inch of insulation from the inner conductor wire.

2. Terminate the speaker wire into the modular plug.

3. Insert the plug into the appropriate zone output on the back panel (See Figure 1).

IMPORTANT: Be careful not to let the exposed speaker wires touch. This will short the connection and could damage the ampliﬁer.

IMPEDANCE:

POWER:

2x50W

2x100W

(per zone)

1/4 in.

(6.4 mm)

Figure 1

Player Portfolio Audio System | Product Manual

SETTING UP YOUR SYSTEM USING THE APP

Once you have connected your system to the local network, you are ready to begin adding components in their desired

locations, naming those locations for local control, and creating your multi-zone music system. The process is easily

done from a compatible mobile device using the Nuvo Player app.

NEW SYSTEM SETUP

The Nuvo Player system is multi-lingual. Upon setting up a new system, the app automatically uses the default

language of your device. Once the system is setup up, if another language is desired, go to settings > international >

language and select another language.

Perform the following steps to set up your system:

Figure 2 Figure 3 Figure 4 Figure 5 Figure 6

1. Conﬁrm that the component is powered on and has an Ethernet connection to the same network as the mobile

device that will be running the Nuvo Player app.

2. Download the Nuvo Player app to a mobile device connected to your home network. The app is available on the

App Store or on Google Play.

NOTE: Google Play and the Google Play logo are trademarks of Google LLC. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.

3. Select Set up my new system (See Figure 2).

NOTE: Control my system is used to connect a new mobile device to an existing system.

4. Select your location and press Next (See Figure 3).

5. Select Player as the component (See Figure 4).

6. Select the Multi-Zone Player option (See Figure 5).

7. Conﬁrm that the component is powered on and has an Ethernet connection to the same network as the mobile

device running the Nuvo Player app (See Figure 6).

NOTE: The status LED on the Player is solid green. For the NV-P5100-XX and NV-P5200-XX, the display shows a “not conﬁgured” message.

Player Portfolio Audio System | Product Manual

Figure 7 Figure 8 Figure 9 Figure 10

8. Add a zone (See Figure 7).

• For the NV-P5050-XX players: Press the Setup button for the zone.

• For NV-P5100-XX and NV-P5200-XX players: Tap the display, then choose a zone. Select Connect.

0. The component shows as connected. Press Next to continue (See Figure 8). The status LED on the component

illuminates a solid white.

a. Choose a name and icon for the zone, then press Next (See Figure 9).

NOTE: A name can be later edited by selecting Edit Name from the bottom of the app screen.

b. Select Add Another Zone and follow the instructions, or choose Finish Setup (See Figure 10).

IMPORTANT: Do not select Finish Setup until all of the zones have been added.

Figure 11 Figure 12

c. Finish Setup brings up the REGISTRATION screen (See Figure 11). Choose one of the following options:

• Complete the product registration form and select Register.

• Select Later to register the product at a later date (See ”General” on page 17 for more detail).

d. Once a registration option is chosen, the screen displays Setup Complete! (See Figure 12). Select Finish and the

app jumps to the HOME screen.

NOTE: A software update may be necessary for any Nuvo components. If prompted with an update, select Continue to update the ﬁrmware.

Player Portfolio Audio System | Product Manual

USING THE NUVO PLAYER APP

The Nuvo Player app offers wireless system control from any Wi-Fi-enabled mobile device. The Nuvo Player app is

available on the App Store or on Google Play. Both versions offer the same look and control options. When used with

tablets, the display is optimized for a view of the complete system’s operation on one screen.

THE DASHBOARD

System control begins with the Dashboard. Each available zone is represented by an icon. To make a music selection,

drag and drop a zone into a zone group, or simply tap an inactive zone to activate the zone. Once your music selection

is made, the related album art and Now Playing information appears in the zone group. Play music on an individual

zone or share music across zones by dragging and dropping multiple zones into a single group. To deactivate a zone

and stop the music playback in that zone, drag the icon into the open dashboard area below the zone groups (See

Figure 13 & Figure 14).

Figure 13 Figure 14

MUSIC SELECTION

When a zone group is activated (See Figure 14), the app jumps to the music navigation pane (See Figure 15). From

there, any of the available streaming services (See Figure 16), personal music libraries (See Figure 17), Bluetooth

(See Figure 18), Direct Stream, local Line-in sources (See Figure 19), or media servers can be selected for playback.

The available music choices are visible in a music selection ribbon at the bottom of the screen (See Figure 15). As you

scroll across the selections using your ﬁnger, the current service highlights and the display changes accordingly.

Figure 15 Figure 16 Figure 17 Figure 18 Figure 19

Player Portfolio Audio System | Product Manual

DIRECT STREAM

If audio ﬁles such as MP3, AAC, FLAC, or other audio ﬁles are on the mobile device running the app, they can be

streamed directly to a zone by selecting the This <Device> icon. When This <Device> has been selected, all music

playable by the device is cataloged and listed in categories such as Artists, Albums, Tracks, Playlists, etc., similar

to what is presented when using the Library Source (See Figure 15). Select the desired function from the app music

selection ribbon. Once you initiate a source, the Grouping, Volume, Transport, Mute, and More options function as

when listening to other sources.

DIRECT STREAMING REQUIREMENTS:

• A device with the Nuvo Player app 1.8 or greater loaded.

• Firmware version 1.8 or greater on the Nuvo component.

• A device connected to the same network as the Nuvo component.

OPERATION NOTES:

• Once a device is direct streaming to a zone, other zones can join the same zone for listening but content cannot be

selected.

• Additional zones have transport control.

• Local joined zones have volume and mute control, as well as the ability to leave the group.

• The number of devices used in a system can’t exceed the number of zones available. A four-zone system can have

a maximum of four devices connected and streaming simultaneously. A sixteen-zone system can support up to

sixteen devices.

• Direct stream supports most device ﬁle formats.

LINE IN

Each component has a 3.5 mm stereo audio line in on the back panel. This input allows any compatible analog music

device to be plugged-in and added to the system as an additional source input. To do this, connect a 3.5 mm stereo

audio cable from the audio output on the compatible analog music device into the line in port on the back of the Nuvo

component “Product Features” on page 5 for the port location.

When a line-in music device is connected, select Line In from the app music selection ribbon. The device appears

on the LINE IN menu and is available for selection from any zone (See Figure 20). Once connected, the app switches

to the music menu and music content is controlled from the app on the connected mobile device (See Figure 21). A

“Rename” utility is available by touching the ... option next to the Line Input, which allows a speciﬁc name to be given

to the music device in the app.

Figure 20 Figure 21

Player Portfolio Audio System | Product Manual

MEDIA SERVERS

This music streaming service is for DLNA/UPnP media servers on a local network. It is an alternative option to a

Windows share when users have a local library to share. Devices include NAS drives, Windows machines, Mac OS

machines with additional software, etc. This option provides a faster browsing and refresh experience for larger

libraries.

There are a variety of potential router/computer/device-speciﬁc needs, so be sure to choose a compatible device. Open

your app, select Media Servers, and choose your content sorting option. (See Figure 22).

Figure 22

Player Portfolio Audio System | Product Manual

THE SETTINGS MENU

The SETTINGS menu has several selections important to the control and operation of your system. Press the (gear

icon) located at the bottom of the DASHBOARD (See Figure 23) to access the SETTINGS menu (See Figure 24). On

smaller format devices, if you are on the Now Playing screen or browsing musical selections (See Figure 25), the

(home icon) at the top of the screen returns the app to the DASHBOARD. From there, touch to access the SETTINGS

menu.

Figure 23 Figure 24 Figure 25

ADD A NUVO COMPONENT

When adding a component to an existing system, navigate to the SETTINGS menu, then select Add a Nuvo Component

(See Figure 26). Choose your component (See Figure 27), then follow the steps in “New System Setup” on page 9.

Figure 26 Figure 27

ZONES

Selecting Zones in the SETTINGS menu provides several controls for audio playback and functionality. When the

Zones button is touched (See Figure 28), the app displays the available zones within the system (See Figure 29). When

a zone is selected, individual settings and controls are available (See Figure 30).

Player Portfolio Audio System | Product Manual

Figure 28 Figure 29 Figure 30 Figure 31

The ZONE SETTINGS screen contains simple slider adjustments or on/off choices that control the sound for the

selected zone.

• Bass, Treble, and Balance: These three sliders offer individual control of each sound setting.

• Loudness: This toggle switch provides bass boost designed for low-volume listening.

• Fixed Volume Line Out: Each of the components has an individual audio line out. This feature allows the audio

output of the zone to supply to an additional ampliﬁer, sub-woofer, or even headphones. By default, this feature is

set to off and the volume level of the output adjusts according to the volume setting set from the app. For some

uses, a ﬁxed output volume level is required. For those instances, turn the feature on.

• Mono: When this feature is turned on, it sums the individual left and right stereo outputs into a single identical

audio output for each of the speaker terminals. This is useful when a single mono speaker provides all stereo

audio content to a zone, or if you have a large area in which both of the speakers need to be heard well at a

common listening position.

If you touch the Zone icon and name at the top of the ZONES SETTINGS screen (See Figure 30), the ZONE ICON page

appears. From there, select Edit Name to change a zone’s icon and name (See Figure 31).

KEYPADS

Selecting Keypads from the SETTINGS menu (See Figure 32) allows you to manage the keypads on your system (See

Figure 33).

Figure 32 Figure 33

Player Portfolio Audio System | Product Manual

THIS APP

When This App is selected, a page appears with the app’s current software version information, a Reset button that

disassociates the app from the system, and scanning options (See Figure 34 – Figure 38).

Figure 34 Figure 35 Figure 36 Figure 37 Figure 38

MUSIC LIBRARY

Existing personal music is easily shared with the entire system by plugging a USB storage device into the

USBport( ) on the back panel of any of the components. The component automatically scans the drives content

and adds it, with associated album art, to the music library.

IMPORTANT: Not all USB drives are supported natively by the USB port. USB drives should meet USB 2.0 requirements.

NOTE: Another way to add music is to use the Music Share software (See “The Music Share Software” on page 19).

Once music is added, select Music Library (See Figure 39). The MUSIC LIBRARY screen displays the number of

songs and ﬁle size of the accumulated library. It also shows the individual sources for music content (See Figure 40).

Choosing Add Share (See Figure 41) allows you to type in the network path to a directory or shared drive with music

content (See Figure 42). When a new library is added, it may take time for the content to be refreshed. The length of

time depends on the amount of content. The screen displays “Refreshing” while the ﬁles of the library are scanned.

Once the refresh is completed, the content is available for browsing and playback.

Figure 39 Figure 40 Figure 41 Figure 42

Player Portfolio Audio System | Product Manual

MUSIC SERVICES

When Music Services is selected (See Figure 43), the active streaming music services on the system display (See

Figure 44) along with a button for adding new services (See Figure 45). Most services require an online subscription

account. The associated user name and password for the music service account must be added under this menu

selection for the service to be active on the system.

Figure 43 Figure 44 Figure 45

NOTE: Music service availability is based on your region. The cost, functionality, and terms of subscription vary by service and are a function of the service provider.

GENERAL

When the General option is selected (See Figure 46), the screen displays four important choices for information about

the components of the system (See Figure 47).

• About gives speciﬁc component information for each zone (See Figure 48).

• Software Update shows any software updates available. Typically, updates automatically pop up on the app

screen and are already downloaded in the background. Select Install to update all of the zones in the system

automatically (See Figure 49).

• Registration opens the product warranty registration page (See Figure 50). The opportunity to register the

product is offered at the initial setup of the sys tem. If the registration is completed at that time, this system

selection is not necessary (See Figure 50 & Figure 51).

• Advanced opens the Reset System feature and the Auto Disband Inactive Groups feature (See Figure 52).

Figure 46 Figure 47 Figure 48 Figure 49

Player Portfolio Audio System | Product Manual

Figure 50 Figure 51 Figure 52

INTERNATIONAL

The International selection (See Figure 53), offers a Location setting (See Figure 54). When a country location is set

(See Figure 55), the legal wireless broadcast channel is set for the selected region. This is an important selection.

Language and Time Zone options are available for further customization (See Figure 56).

Figure 53 Figure 54 Figure 55 Figure 56

HELP

The Help option (See Figure 57), displays links to contact Nuvo directly, to reference information on various system

components, or to report a problem (See Figure 58–Figure 61).

Figure 57 Figure 58 Figure 59 Figure 60 Figure 61

Player Portfolio Audio System | Product Manual

THE MUSIC SHARE SOFTWARE

The Music Share Software allows music content from shared network locations and libraries, to be streamed from

any zone in the sys tem.

1. From your computer, go to http://www.legrand.us/resources-and-downloads/software-downloads to download

the music share software.

2. Follow the prompts for installing the software (See Figure 62).

Figure 62

3. The software connects to the network and displays a blank music share page. Choose the Add new option. The

music share choices open (See Figure 63).

Figure 63

4. The My Music folder is the default location for Windows Media Player libraries (See Figure 64). If your music is

stored on a Mac computer, or your preferred music library software is in iTunes, then select a different folder. A

progress window appears (See Figure 65).

Figure 64 Figure 65

Player Portfolio Audio System | Product Manual

5. You can also choose to share a speciﬁc folder or drive on the network. The A speciﬁc folder... choice opens a

browsing window (See Figure 66). From there you can choose a shared folder with music content or a drive that is

shared with the network.

Figure 66

All shared folders and drives display in the software (See Figure 67). Access the software at any time to add or remove

content.

NOTE: If you are sharing a personal library located on a personal computer hard drive, the software must be downloaded to that computer before the share is created.