Sun Joe MJ401C-XR-SJB Manuel utilisateur

Marque: Sun Joe

Modèle: MJ401C-XR-SJB

Catégorie: Tondeuses à gazon

Taper: Manuel utilisateur

Ce manuel convient également à

MJ401C-XR

, LLC

A Division of Snow Joe

, LLC

Model MJ401C-XR

Form No. SJ-MJ401C-XR-880E-M

OPERATOR’S MANUAL

SAVE THESE INSTRUCTIONS

CORDLESS LAWN MOWER

28 V D.C. | 5.0 Ah | 14-INCH

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety WARNINGS!

When using this cordless lawn mower, basic safety

precautions should always be followed to reduce the risk of

re, electric shock and personal injury. These precautions

include:

mWARNING! Do not operate without the entire grass

catcher, discharge guard, rear guard or other safety protective

devices in place and in proper working order.

mWARNING! The use of any other accessory or

attachment might increase the risk of injury.

mWARNING! To reduce the risk of injury, inspect the

catcher assembly frequently and replace with recommended

replacement if there are signs of wear or deterioration.

Before using the mower, take the time to familiarize yourself

with the controls, especially how to stop the mower in

an emergency. The only individuals who should use the

mower are those who have a thorough understanding of the

instructions and who know how to operate the machine.

Children should never be allowed access to the mower.

Retain this manual for future reference and reread it at the start

of each mowing season.

mWARNING! Contact with moving parts may cause

entanglement, dismemberment or other serious bodily

injury. Always keep body parts (i.e. hands, feet) a safe

distance away from moving parts. Ensure all covers and

guards are securely in place before use.

Hot surfaces (i.e. the motor) may ignite ammable or

combustible items and cause a re or explosion, which

can result in serious bodily injury. Keep the mower a safe

distance away from ammable or combustible items until

surfaces that are hot have completely cooled. Do not store

the mower near ammable or combustible items.

A damaged blade or worn blade nut may break o the

mower assembly and cause serious injury. Replace the

damaged blade or blade nut before using the mower.

1. Avoid dangerous conditions – Do not use the mower in

the rain or when the grass is damp or wet.

2. Keep children, bystanders and pets away – Always

keep children and spectators a safe distance away from

the mower during operation and as the machine cools.

3. Dress properly – Always wear personal safety gear (i.e.

glasses, rubber gloves, protective footwear and dust

masks) and proper clothing when using the mower. Loose

clothing, long hair or jewelry may get caught in the moving

parts.

4. Use the right appliance – Do not use the lawn mower

for any applications other than those for which it was

intended.

5. Do not force the lawn mower – It will perform better with

less likelihood of personal or mechanical injury if it is used

at the rate for which it was designed.

6. Do not overreach – Keep proper footing and balance at

all times.

7. Stay alert – Always be alert and watch what you are

doing. Use common sense. Do not operate the lawn

mower when you are tired or under the inuence of

alcohol or drugs.

8. Disconnect the lawn mower – Turn OFF and remove

safety key when the mower is not in use, before servicing

it, when changing accessories and when performing any

other maintenance task.

9. Store idle lawn mower indoors – When not in use, the

lawn mower should be stored indoors in a dry, locked

place out of the reach of children.

10. Maintain the lawn mower with care – Keep cutting

edges sharp and clean for best and safest performance.

11. Use personal protective equipment. Always wear eye

protection – Protective equipment such as safety glasses,

a dusk mask, non-skid safety shoes, a hard hat, and

hearing protection, when used for appropriate conditions,

will reduce the possibility of personal injuries.

12. Avoid unintentional starting – Ensure the switch is in

the OFF position before insert the safety key, or before

picking up or carrying the tool. Carrying power tools with

your nger on the switch or charging power tools with the

switch ON can lead to accidents.

13. Remove any adjusting key or wrench before starting

the power tool – A wrench or a key left attached to a

rotating part of the power tool may result in personal

injury.

14. Keep cutting blades sharp and clean – Properly

maintained cutting blades with sharp edges are less likely

to bind and are easier to control.

15. Keep all parts of the body away from the cutting blade

– Do not remove cut material or hold material to be cut

when blades are moving. Make sure the switch is o when

clearing jammed material. A moment of inattention while

operating the product may result in serious personal injury.

16. If the lawn mower strikes a foreign object, follow these

steps:

i) Stop the lawn mower by releasing the start/stop switch

bar lever.

ii) Remove the safety key.

iii) Inspect for damage.

iv) Repair any damage before restarting and operating

the lawn mower.

17. Only use identical replacement blades and

other genuine parts.

18. Keep guards in place and in proper working order.

Electrical Safety

1. If the battery charger cable is damaged, please call the

Snow Joe

+ Sun Joe

customer service center at

1-866-SNOWJOE (1-866-766-9563).

2. If charging the power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected power supply. The using of an RCD reduces the

risk of electric shock.

3. Avoid body contact with earthed or grounded surfaces

such as pipes, radiators, ranges and refrigerators. There is

an increased risk of electric shock if your body is earthed

or grounded.

4. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

5. Do not abuse the charging cord. Never use the cord

for carrying, pulling or unplugging the charger. Keep

cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric

shock.

6. Battery charger is for indoor use only. Do not charge lawn

mower in rain ,or in wet locations.

Battery Safety Warnings

This manual contains important safety and operating

instructions for your battery and charger.

1. Before using the charging, thoroughly read all instructions

and cautionary markings on the charger, the battery, and

the unit.

mWARNING! If the lawn mower housing is cracked or

damaged, do not insert the charging adapter into the power

tool or plug the AC adapter into the mains outlet. There is a

danger of electric shock or electrocution.

2. This charger is ONLY intended to charge this rechargeable

battery. Any other use poses a risk of re, electric shock

or electrocution.

3. Do not place any object on top of the charger or place

the charger on a soft surface that may result in excessive

internal heat. Keep the charger away from any heat

source.

4. To reduce the risk of damaging the electric plug and

cord, pull the plug, not the cord, when disconnecting the

charger from the electric outlet.

5. Make sure the battery charging cable is located in a safe

place so that it will not be stepped on, tripped over or

otherwise subjected to damage or stress.

6. An extension cord should not be used unless absolutely

necessary. Using an improper extension cord poses a risk

of re, electric shock or electrocution.

7. Do not operate the charger if it has received a sharp

blow or has become damaged in any way. Contact

the Snow Joe

+ Sun Joe

customer service center at

1-866-SNOWJOE (1-866-766-9563) before continuing

use.

8. Do not disassemble the charger. If the charger requires

service or repair, contact an authorized Snow Joe

Sun Joe

dealer or call the Snow Joe

+ Sun Joe

customer service center at 1-866-SNOWJOE

(1-866-766-9563). Incorrect reassembly poses a risk of

electric shock, electrocution or re.

9. To reduce the risk of electric shock, unplug the charger

from the outlet before cleaning the unit.

10. Never attempt to connect two (2) chargers together.

11. DO NOT store or use the tool and battery pack in

locations where the temperature may reach or exceed

104 ºF (40 ºC). Dangerous storing locations include

outdoor sheds or metal buildings in the summer.

12. The charger is designed to operate on standard household

electrical power (120 V). Do not attempt to use it with any

other voltage!

NOTE: The integrated battery is not fully charged out of

the carton. Read the safety instructions and then follow

the charging notes and procedures.

13. The longest life and best performance can be obtained if

the integrated battery is charged when the air temperature

is between 64.4ºF – 75.2ºF (18ºC – 24ºC). Do not charge

the battery pack when the air temperature falls below

50ºF (10ºC) or above 104ºF (40ºC). Following these safety

measures will prevent damage to the battery pack.

14. Do not incinerate the integrated battery even if it is

seriously damaged or completely worn out. The battery

can explode in a re.

IMPORTANT!

Safety Instructions for

Walk-Behind Mowers

General Operation

• Read, understand and follow all instructions on the

machine and in the manual(s) before starting.

• Do not put hands or feet near or under the machine.

Always stay clear of the discharge opening.

• Only responsible adults who are familiar with the

instructions should be allowed to operate this machine.

• Clear the mowing area of foreign objects such as rocks,

wire, toys and other miscellaneous articles, which could

be picked up and thrown by the blade. Stay behind the

handle when the engine (motor) is running.

• Make sure that the mowing area is clear of bystanders

before starting the machine. Stop the machine if anyone

enters the area.

• Do not operate the machine barefooted or while wearing

sandals. Always wear substantial footwear.

• Always look down and behind before and while moving

backward with the mower.

• Never direct discharged material toward anyone. Avoid

discharging material against a wall or other obstruction.

• Do not operate the machine without the entire grass

catcher, discharge guard, rear guard or other safety

protective devices in place and in proper working order.

• Never leave a running machine unattended.

• Stop the engine (motor) and wait until the blade comes to

a complete stop before cleaning the machine, removing

the grass catcher or unclogging the discharge guard.

• Operate the machine only in daylight or in good articial

light.

• Do not operate the machine when you are tired or under

the inuence of alcohol or drugs.

• Never operate the mower in wet grass. Always be sure of

your footing; walk, never run, with the mower.

• If the machine should start to vibrate abnormally, stop

the engine (motor) and immediately check the machine

to ascertain the cause. Vibration is generally a signal of

trouble.

• Keep blades sharp.

• Keep hands and feet away from the cutting area.

• Always wear eye protection when operating the machine.

• Objects struck by the lawn mower blade can cause severe

injuries. The mowing area should always be carefully

examined and cleared of all objects prior to each mowing.

Slope Operation

Slopes are major factors related to slip and fall accidents,

which can result in severe injury. Operation on all slopes

requires extra caution. If you feel uneasy on a slope, do not

mow it.

• Mow across the face of slopes; never mow slopes

following an up and down traverse. Exercise extreme

caution when changing direction on a slope.

• Watch for holes, ruts, bumps, rocks or other hidden

objects. These may cause an unexpected slip or fall.

• Do not mow on wet grass or excessively steep slopes.

Poor footing could cause a slip and fall accident.

• Do not mow near drop os, ditches or embankments. You

could lose your footing or balance.

Children

Tragic accidents can occur if the operator is not alert to the

presence of children. Children are often attracted to the

machine and the mowing activity. Never assume that children

will remain where you last saw them.

• Keep children out of the mowing area and under the

watchful care of a responsible adult other than the

operator.

• Stay alert and turn the mower o if a child enters the area.

• Never let children operate the machine.

• Use extra care when approaching blind corners, shrubs,

trees or other objects that may block your view of a child.

Service

• Stop the machine and disconnect the safety key before

servicing, cleaning, or removing grass from the lawn

mower.

• Keep all nuts and bolts tight.

• Never tamper with safety devices. Regularly check to

ensure these devices are in place and in proper working

order.

• Keep the mower free from grass, leaves or other debris

buildup.

• If you strike a foreign object, stop and inspect the

machine. Repair, if necessary, before restarting.

• Never make any adjustments or repairs with the engine

(motor) running. Always plug out the safety key before

adjusting, cleaning or repairing.

• Check the grass bag components and the discharge

guard frequently and replace with manufacturer’s

recommended parts when necessary.

• Mower blades are sharp. Wrap the blade or wear gloves,

and use extra caution when servicing them.

• Maintain or replace safety and instruction labels, as

necessary.

• If your power tool requires service, contact an authorized

Snow Joe

+ Sun Joe

dealer or call the Snow Joe

Sun Joe

customer service center at 1-866-SNOWJOE

(1-866-766-9563). Only identical replacement parts should

be utilized for repairs. This will ensure that the safety of

the power tool is maintained.

• If the battery charger cable is damaged, it must be

immediately replaced to avoid a hazard. Contact the

Snow Joe

+ Sun Joe

customer service center at

1-866-SNOWJOE (1-866-766-9563) for assistance.

Safety Symbols

The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all

instructions on the machine before attempting to assemble and operate.

To reduce the risk of injury, user

must read instruction manual.

Safety Alert. Caution.

Slip on slope hazard – Use extra

caution when mowing on slopes to

prevent slip and fall accidents.

Severing of toes or ngers by

rotary mower blade.

Thrown objects and rotating

blade can cause severe injury.

Wear eye and hearing protection. For

protection against injury, wear ear

defenders and safety goggles.

Keep bystanders and children a safe

distance away.

DANGER! Rotating blades. Keep

hands and feet away.

Symbols SymbolsDescriptions Descriptions

WARNING! Do not expose or

operate the unit in rain or wet

conditions. Keep dry.

Wear protective gloves and

non-slip footwear when using the

machine and handling debris.

Keep bystanders a safe distance

away from the work area.

Blades continue to rotate after

machine is switched o.

WARNING! Always turn the machine

OFF and remove the safety key

before conducting inspection,

cleaning and maintenance.

Indoor use only. Only use battery charger indoors.

Look behind when backing up with

the lawn mower.

Rotating blades, keep hands and

feet away from the opening while

the machine is running.

Symbols

Know Your Cordless Lawn Mower

Read the owner’s manual and safety instructions carefully before operating the mower. Compare the illustration below

to the mower in order to become familiar with the location of the various controls and adjustments. Save this manual for

future reference.

1. Switch lever

2. Safety lock button

3. Switch box

4. Cable clip (2)

5. Upper handle knobs and bolts (2)

6. Top cover

7. Safety key

8. Charge socket

9. Battery capacity indicator

10. Battery gauge cover

11. Wheels (4)

12. Mower deck

13. Grass collection bag

14. Ejector ap

15. Lower handle

16. Upper handle

17. Hand grip

18. AC charger

*Initial no-load voltage, when fully charged, peaks at 29.4 volts; nominal voltage under typical load is 28 volts.

Technical Data

Battery Voltage* 28 V D.C.

Battery Capacity 5.0 Ah

Charger Input 100 – 240 V AC

50/60 Hz 0.8 A

Charging Time 5 hours

No Load Speed 3,000 rpm

Cutting Time 30 min

Steel Blade 14 in. (35.6 cm)

Motor Brushless

Cutting Height 1.18 in. to 2.52 in.

(30 mm to 64 mm)

Grass Bag Capacity 10.6 gal (40 L)

Wheel Size 5.5 in. (14 cm)

Weight (Battery installed) 23.1 lbs (10.5 kg)

Unpacking

Carton Contents

• Cordless lawn mower

• Grass collection bag

• Grass collection bag support rod

• Upper handle

• Upper handle knob and bolt assembly (2)

• Lower handle

• Lower handle screws (2)

• Spanner

• Screws (2)

• Cable clips (2)

• Battery charger

• Manual and registration card

1. Carefully remove the lawn mower and check to see that all

of the above items are supplied.

2. Inspect the product carefully to make sure no breakage

or damage occurred during shipping. If you nd damaged

or missing parts, DO NOT return the unit to the store.

Please call the Snow Joe

+ Sun Joe

customer service

department at 1-866-SNOWJOE (1-866-766-9563).

NOTE: Do not discard the shipping carton and packaging

material until you are ready to use your new cordless lawn

mower. The packaging is made of recyclable materials.

Properly dispose of these materials in accordance with

local regulations.

Assembly

mWARNING! Do not insert the safety key until assembly

is complete. Failure to comply could result in accidental

starting and serious personal injury.

mWARNING! Before performing any maintenance, make

sure the key is removed from the unit. Failure to heed this

warning could result in serious personal injury.

mWARNING! The product must be fully assembled

before operation. Do not use a product that is only partially

assembled or assembled with damaged parts.

NOTE: Before using the mower, follow these instructions to

assemble the handle and grass bag.

Handle Assembly

1. Fit the lower handle into the two holes in the machine

body and fasten the handle on both sides with the screws

provided (Fig. 1).

2. Join the upper handle to the lower handle using the knob,

plastic washer and bolt provided (Fig. 2). Repeat on the

opposite side.

Grass Collection Bag Assembly + Fitting

1. Fit the support rod into the holes in the plastic cover.

The bend of the support rod should face the rear of the

machine (Fig. 3).

Fig. 1

Machine body

Screw

Lower handle

Fig. 2

Upper handle

Plastic washer

Knob

Bolt

Fig. 3

Support rod

Plastic

cover

2. Place the protective plastic straps onto the support rod

(Fig. 4).

3. Lift the ejector ap with one hand. With the other hand,

hold the grass collection bag by the handle and hook it in

from above (Fig. 5).

Fig. 5

Ejector ap

Grass collection bag

4. Release the ejector ap to secure the grass collection bag

in position (Fig. 6).

Before Using

Charging Procedure

The battery charger supplied matches the lithium-ion battery

installed in the tool. Do not use other battery chargers.

The lithium-ion battery is protected against deep discharging.

When the battery is empty, a protective circuit will

automatically switch OFF the machine.

Charge the battery for up to 5 hours then use it until it runs

down (i.e. the tools starts to operate slowly). Recharge for

up to 5 hours again before resuming operation.

The mower is equipped with a battery capacity indicator

system under the battery gauge cover. To check the battery

capacity, lift up the battery gauge cover and push the button

(Fig. 7). The charge indicator system indicates the battery

status of the lawn mower as the table shows below.

Battery Charging

The battery in this lawn mower has been designed to provide

maximum trouble-free life. However, like all batteries, it will

eventually wear out. To obtain the longest possible battery life,

we suggest the following:

• Store and charge your lawn mower in a cool area.

Temperatures above or below normal room temperature

will shorten battery life.

Fig. 4

Support rod

Protective

plastic

straps

Fig. 6

Ejector ap

Grass

collection

bag

PUSH

Fig. 7

Battery capacity

indicator system

Battery

gauge cover

Push

the

button

Condition

LED's Illuminated

1- Green, 2- Yellow,

3- Red

1- Not illuminated, 2- Yellow,

3- Red

1- Not illuminated,

2- Not illuminated, 3- Red

More than 60% charged

More than 30% charged

Less than 30% charged.

Need to be charged

• Never store the lawn mower with the battery in a

discharged condition. Recharge the unit immediately after

it is discharged.

• All batteries gradually lose their charge. The higher the

temperature is, the faster they lose their charge. If you

store your lawn mower for long periods of time without

using it, recharge the battery every 6 months. This will

extend battery life.

NOTE: The lawn mower has been shipped in a low charge

condition and should be fully charged before use.

1. Plug the charger into an appropriate AC power outlet.

Connect the charger plug into the charging socket of the

lawn mower to start charging (Fig. 8).

2. The charge indicator LED on the charger will illuminate red

to indicate that the charging is in progress (Fig. 8).

3. The battery will take approximately 5 hours to charge. The

charge indicator LED will become green when the battery

is fully charged, unplug the charger immediately when the

green light is on.

mCAUTION! This charger does not automatically turn o

when the battery is fully charged. Please take care not to leave

the lawn mower plugged into the charger. Switch o or unplug

the charger at the mains when charging is complete.

NOTE: The charge indicator LED light will illuminate red when

the charger is plugged in and is charging the lawn mower. The

light will turn green when the lawn mower is fully charged.

The charging process starts as soon as the charger is plugged

into both the proper electrical outlet and the tool.

• During the charging procedure, the housing of the tool will

feel slightly warm to the touch. This is normal.

• When no further use is planned for an extended period of

time, disconnect the battery charger from the outlet and the

unit.

• Do not use the tool during the charging procedure.

Operation

This lawn mower is intended for private residential use to cut

grass in small lawns and gardens. This lawn mower is not

intended to cut grass in public parks, playing elds, farms or

forests. Do not use this lawn mower for any application other

than that for which it is intended.

Starting + Stopping

mWARNING! Before switching on the mower, make sure

that it is not in contact with any foreign objects. Keep your

hands and feet a safe distance away from the rotating mower

blade and the ejector opening. Failure to comply with these

warnings can result in severe personal injury.

IMPORTANT: Do not start the mower in tall grass.

1. Before starting the unit, insert the safety key in the slot

(Fig. 9).

2. Before starting the lawn mower, hold the handle assembly

with both hands and tilt the handle downward to slightly

raise the front of the lawn mower. This will reduce the risk

of lawn damage during start-up (Fig. 10).

Fig. 8

Charger

adapter

Charger

plug

Charge

indicator

LED light

Fig. 9

Safety key

Fig. 10

3. To start the cordless lawn mower, press and hold the

safety lock button while pulling the switch lever toward

you (Fig. 11).

4. Once the machine powers on, release the safety lock

button and proceed with operation, gently lowering the

mower down into the cutting position (Fig. 12).

5. To stop the mower, release the switch lever.

mWARNING! The mower blade will continue to rotate for

a brief period after the unit has been switched o. Do not tilt or

carry the unit while the motor is still running and do not touch

the blade while it is still rotating. Failure to comply could result

in severe personal injury.

Adjusting the Cutting Height

Follow these instructions to adjust the cutting height of the

lawn mower.

mWARNING! Before making these adjustments,

disconnect the power supply to the mower by plugging

out the safety key from the slot, and wait until the rotating

blade has come to a complete standstill. Wearing gloves is

recommended due to the close proximity of the cutting blade.

ALWAYS FOLLOW ALL SAFETY PRECAUTIONS AND

RECOMMENDATIONS LISTED PREVIOUSLY IN THIS

MANUAL.

1. Power o and move the key out from the slot.

2. Remove and empty the grass collection bag.

3. Place the lawn mower on its side.

4. The wheel axles can be placed into 3 dierent cutting

heights: low (will cut grass the shortest), medium, and

high.

3-Position Height Adjustment:

1. Low: 1.18 in. (30 mm)

2. Medium: 1.93 in. (49 mm)

3. High: 2.52 in. (64 mm)

The cutting height tolerance is +/- 0.2 in. (5 mm).

5. Move all four wheels to the desired cutting height by

pulling back on the rod axle and setting it to the correct

position. Make sure all four wheels are at the same cutting

height position.

NOTE: Set the mower to the highest cutting height when

mowing on uneven ground or in tall weeds.

6. Place the lawn mower back on to its wheels and reattach

the grass collection bag.

7. Insert the safety key into the slot and resume normal use.

Fig. 11

Switch lever

Safety lock

button

Fig. 12

Fig. 13

High setting

Medium setting

Low settingRod axle

Mowing Tips

mWARNING! Inspect the area prior to mowing and

remove all the stones, sticks, wires and other foreign objects

that could be picked up and thrown by the rotating blade.

Failure to comply not only will damage the mower blade, but

can also lead to serious personal injury.

• Be sure to check the mowing blade periodically for signs

of wear and sharpen it at least once per year, as described

in the maintenance section.

NOTE: A sharp blade will greatly enhance the

performance of the mower, especially when cutting tall

blades of grass.

• When cutting thick grass, reduce your walking speed

in order to allow for a more eective cut and a proper

discharge of the clippings. For a healthy lawn, always cut

o one-third or less from the total length of the grass. The

average lawn should be approximately 1.5 to 2 in. (3.8 to

5 cm) long during cool months, and more than 2 in. (5 cm)

long during hot months. If there is growth, the lawn should

be cut in the fall.

• The lawn will look better if it is always cut to the same

height and in alternate directions.

• When crossing any gravelled surfaces, release the switch

bar lever to turn o the mower. The stones can be picked

up and thrown by the rotating blade.

• Set the mower to the highest cutting height when mowing

on uneven ground or in tall weeds.

mWARNING! If you strike a foreign object, stop the motor

and remove the safety key. Thoroughly inspect the mower and

repair any damage before resuming work.

• IMPORTANT! Never open the ejector ap when the grass

collection bag has been detached (to be emptied) and the

motor is still running. A rotating blade can cause serious

injuries!

• Always carefully fasten the ejector ap and grass

collection bag. Switch o the motor before emptying the

grass collection bag. Always ensure that a safe distance

(provided by the length of the long handles) is maintained

between the user and the mower housing. Be especially

careful when mowing and changing direction on slopes

and inclines.

• Maintain a solid footing and wear sturdy, non-slip footwear

and long trousers. Always mow across an incline (not up

and down).

• For safety reasons, the lawn mower may not be used to

mow inclines with gradients exceeding 15 degrees.

• Use special caution when backing up and pulling the lawn

mower towards you as such maneuvering of the machine

poses a tripping hazard.

Maintenance + Care

mWARNING! Before cleaning, repairing or inspecting

the mower, disconnect the power supply by plugging out the

safety key and verify that all moving parts have come to a

complete stop.

General

• Always keep the mower clean and free of grass, dirt or

other debris.

• Keep the handles dry, clean and free of oil and grease.

• After each cutting session, remove accumulated grass

clippings and debris using either a dry cloth or handbrush.

You may also clean the equipment with a damp cloth and

some soft, non-abrasive soap. Do not use cleaning agents

or harsh solvents as they may damage the equipment's

plastic components. Make sure that no water penetrates

the equipment's interior as intake of water can destroy the

switch/plug mechanism and the electric motor.

• Do not clean the lawn mower with running water,

particularly with high-pressure water.

• Check all nuts, bolts and screws for proper tightness

before each use.

• Frequently inspect the grass collection bag assembly for

signs of wear and replace immediately with a genuine

Snow Joe

+ Sun Joe

part if damage is found.

• Replace excessively worn or damaged parts immediately.

• To maximize your mower's longevity, all screwed parts,

including the wheels and axles, should be cleaned and

lubricated. There are no parts inside the equipment which

require additional maintenance or lubrication.

Blade Maintenance

IMPORTANT: The mower blade is sharp and can cause severe

personal injury if handled incorrectly. Wrap the blade or wear

protective gloves, and use extra caution when handling.

The steel blade is designed to provide a ne cut in long or

tough grass. Deterioration in the quality of cut indicates blade

wear or damage. Follow these steps to determine if the blade

needs to be resharpened or replaced:

1. Disconnect the power supply to the mower by removing

the safety key.

2. Turn the mower on its side to expose the underside of the

blade housing.

3. Check the blade.

a. If the blade is blunt or has minor wear, then resharpen.

Contact an authorized Snow Joe

+ Sun Joe

service

center.

b. If the blade shows signs of major wear or damage (i.e.

gouged, bent), replace. Please call Snow Joe

Sun Joe

customer service for assistance at

1-866-SNOWJOE (1-866-766-9563).

mWARNING! An excessively vibrating mower indicates

that the blade is not properly balanced or has become

deformed from striking an object. In this case, the blade must

be repaired or replaced. Please follow the proper maintenance

procedures for blade care or call the Snow Joe

+ Sun Joe

customer service center for assistance at 1-866-SNOWJOE

(1-866-766-9563).

Blade Replacement

IMPORTANT: Only use original replacement parts specied for

this mower.

You can purchase a replacement blade (Model MJ401C-BLD)

and other genuine replacement parts by visiting us online at

snowjoe.com or calling our toll-free customer service helpline

at 1-866-SNOWJOE (1-866-766-9563). The use of parts that

do not meet the original equipment specications may lead to

improper performance of the lawn mower, may compromise

operator safety and will void the manufacturer's warranty.

1. Disconnect the safety key to the mower.

2. Turn the mower on its side to expose the underside of the

blade housing.

3. Use a cloth to grip the blade or wear heavy-duty gloves.

4. Using the spanner provided, remove the bolt and

the washer securing the blade by turning the bolt

counterclockwise, then carefully remove the blade

(Fig. 14).

5. Fit the new blade, the washer and the bolt back on

following the same steps in reverse order (Fig. 15).

Storage

Follow the steps below to prepare the lawn mower for storage:

1. Remove the safety key from the slot.

2. Clean the mower with a damp cloth or hand brush.

3. Inspect the mower carefully for worn, loose or damaged

parts. Check connections and screws and tighten if

necessary. Pay special attention to the mower blade and

replace/sharpen if it shows signs of wear. Refer to the

Maintenance and Care section.

4. Store the mower indoors in a dry, clean and cool area

out of the reach of children. Do not store the unit next to

corrosive materials, such as fertilizer and rock salt.

5. Do not cover the lawn mower with a solid plastic sheet.

Plastic coverings trap moisture around the mower, which

can damage the unit.

6. The handle on your lawn mower can be folded for

compact storage. Start by loosening the handle knobs on

each side of the upper handle and fold down the upper

handle (Fig. 16).

Fig. 14

Blade

Spanner

Fig. 15

Blade

Bolt

Washer

Disposal

Recycling + Disposal

The product comes in a package that protects it against

damage during shipping. Keep the package until you are

sure that all parts have been delivered and the product is

functioning properly. Recycle the package afterwards or keep

it for long-term storage.

WEEE symbol. Waste electrical products should not

be disposed of with household waste. Please

recycle where facilities exist. Check with your local

authority or local store for recycling regulations.

Battery Caution + Disposal

Always dispose of your battery pack according to federal,

state, and local regulations. Contact a recycling agency in your

area for recycling locations.

mCAUTION! Even discharged battery packs contain

some energy. Before disposing, use electrical tape to cover

the terminals to prevent the battery pack from shorting, which

could cause a re or explosion.

mWARNING! To reduce the risk of injury or explosion,

never burn or incinerate a battery pack even if it is damaged,

dead or completely discharged. When burned, toxic fumes

and materials are emitted into the surrounding atmosphere.

1. Batteries vary according to device. Consult your manual

for specic information.

2. Install only new batteries of the same type in your product

(where applicable).

3. Failure to insert batteries in the correct polarity, as

indicated in the battery compartment or manual, may

shorten the life of the batteries or cause batteries to leak.

4. Do not mix old and new batteries.

5. Do not mix Alkaline, Standard (Carbon-Zinc) or

Rechargeable (Nickel Cadmium, Nickel Metal Hydride, or

Lithium-Ion) batteries.

6. Do not dispose of batteries in re.

7. Batteries should be recycled or disposed of as per state

and local guidelines.

Service + Support

If your Sun Joe

MJ401C-XR cordless lawn mower requires

service or maintenance, please call 1-866-SNOWJOE

(1-866-766-9563) for assistance.

Model + Serial Numbers

When contacting the company or reordering parts, you will

need to provide the model and serial numbers of your product.

These are found on the decal axed to the housing or handle

of your mower. Copy these numbers into the space provided

below.

Record the following numbers from the housing or handle of your

new product:

Model #:

M J 4 0 1 C - X R

Serial #:

Fig. 16

Upper

handle

knob

Upper handle

Troubleshooting

• Remove the safety key before carrying out maintenance on the machine or when checking that its parts are

in proper working order.

• To avoid unnecessary hassles, consult the following table before contacting customer service with any mechanical issues.

Only a company specialist may be able to correct faults that cannot be rectied with the aid of this table. Please call the

Snow Joe

+ Sun Joe

customer service center at 1-866-SNOWJOE (1-866-766-9563).

Mower fails to start

Mower stops while

mowing

The mower cannot

cut grass evenly

a) The safety key is not inserted

b) The motor/blade control is

disengaged

c) The battery is at

d) The mower deck is clogged with

grass or debris

e) The grass is too tall

a) Insert the safety key

b) Press safety lock button rst ,then the

switch lever.

c) Charge the battery

d) Clean the mower deck. Make sure the

blade is free to move

e) Set the mower to a high cutting

height. Lift the front wheels slightly by

pressing down on the handle bar.

a) The battery is at

b) The grass is too tall

c) The mower deck is clogged with

grass or debris

d) The machine is overload and

switched o by the overload

protection system

a) Charge the battery

b) Reset the cutting height

c) Clean the mower deck. Make sure the

blade is free to move

d) Cool down the machine for 5 mins. Wait

for the overload protection to reset the

machine

a) The lawn is rough or uneven

b) The blade is not sharp enough

a) Adjust cutting height

b) Sharpen or replace the blade

Fault Possible Cause Remedy

The mower cannot mulch

properly

a) The mower deck is clogged with

grass or debris

b) The grass is too wet

c) The grass is too tall

d) The blade is not sharp enough

a) Clean the mower deck. Make sure the

blade is free to move

b) Wait until the grass is dry

c) Adjust the cutting height to the high

position to mow for the rst time, and

mow again at the desired height setting

d) Sharpen or replace the blade

The mower is dicult to push

a) The grass is too tall to cut

b) The blade or the mower rear is

dragged by heavy grass

a) Adjust cutting height higher

The mower is vibrating at high

speed

a) The motor shaft is bent

b) The blade is unbalanced

c) The blade screw is loosen

a) Stop the motor, remove the safety key,

and inspect the damage. Call the Snow

Joe

+ Sun Joe

customer service center

at 1-866-SNOWJOE (1-866-766-9563)

b) Balance the blade by grinding each

cutting edge equally or replace a new one

c) Tighten the blade bolt

Optional Accessories

mWARNING! ALWAYS use only authorized Snow Joe

+ Sun Joe

replacement parts and accessories. NEVER use

replacement parts or accessories that are not intended for use with this tool. Contact Snow Joe

+ Sun Joe

if you are unsure

whether it is safe to use a particular replacement part or accessory with your tool. The use of any other attachment or accessory

can be dangerous and could cause injury or mechanical damage.

NOTE: Accessories are subject to change without any obligation on the part of Snow Joe

+ Sun Joe

to provide notice of such

changes. Accessories can be ordered online at snowjoe.com or via phone by contacting the Snow Joe

+ Sun Joe

customer

service center at 1-866-SNOWJOE (1-866-766-9563).

10.6-gallon (40 l) grass collection bag

MJ401C charger

MJ401E-10

iCHRG28-AC

ModelAccessories Item

Lawn Mower Side-Discharge

Chute Accessory

MJ401E-DCA

NOTES

SNOW JOE

+ SUN JOE

CUSTOMER PROMISE

PRODUCT REGISTRATION:

Snow Joe

, LLC (“Snow Joe

+ Sun Joe

”) strongly encourages

you to register your purchase. You can register online at

snowjoe.com/ProductRegistration, or by printing and mailing

in a registration card available online from our website, or

calling our Customer Service Department at 1-866-SNOWJOE

(1-866-766-9563), or by e-mailing us at [email protected].

Failure to register your product purchase will not diminish your

warranty rights. However, registering your purchase will allow

Snow Joe

+ Sun Joe

to better serve you with any of your

customer service needs.

WHO CAN SEEK WARRANTY COVERAGE?

This Warranty is extended by Snow Joe

+ Sun Joe

to the owner

of this Machine (a “Machine” consists of a product powered by

a motor) for residential and personal household use only. This

Warranty does not apply to products used for commercial, rental

or re-sale purposes. Should ownership of this machine change

during the 2-year period, please update the Machine’s owner

information at snowjoe.com/ProductRegistration.

WHAT IS COVERED?

Snow Joe

+ Sun Joe

warrants to the owner that if this Machine

fails within 2 years from the date of purchase due to a defect in

material or workmanship or as a result of normal wear and tear

from ordinary household use, Snow Joe

+ Sun Joe

will send a

replacement part or product, as needed, free of charge and with

free shipping to the original purchaser.

If, in Snow Joe

+ Sun Joe

’s sole discretion, the failed Machine

cannot be repaired with a part, Snow Joe

+ Sun Joe

will elect to

either (A) send a new Machine at no charge and with free shipping

or (B) refund the full purchase price to the owner.

WHAT IS NOT COVERED?

This Warranty does not apply to the Machines that have been used

commercially or in non-household applications. This Warranty

does not cover cosmetic changes that do not aect performance.

This Warranty is only valid if the Machine is used and maintained

in accordance with the instructions, warnings and safeguards

contained in the owner’s manual. Snow Joe

+ Sun Joe

will not

be responsible for the cost of any unauthorized warranty repairs.

This warranty does not cover any cost or expense incurred by

the purchaser in providing substitute equipment or service during

reasonable periods of malfunction or non-use of this product

while waiting for a replacement part or unit under this warranty.

Wearing parts like belts, augers, chains and tines are not covered

under this warranty, and can be purchased at snowjoe.com or

by calling 1-866-SNOWJOE (1-866-766-9563). Batteries are

covered in full for 90-days from the date of purchase.

Repair, replacement or refund of the purchase price are the

exclusive remedies of purchaser and the sole liability of Snow Joe

+ Sun Joe

under this warranty. No employee or representative

of Snow Joe

+ Sun Joe

is authorized to make any additional

warranty or any modication to this warranty which may be

binding upon Snow Joe

+ Sun Joe

. Accordingly, purchaser

should not rely upon any additional statements made by any

employee or representative of Snow Joe

+ Sun Joe

. In no event,

whether based on contract, indemnity, warranty, tort (including

negligence), strict liability or otherwise, shall Snow Joe

Sun Joe

be liable for any special, indirect, incidental, or

consequential damages, including, without limitation, loss of

prot or revenue.

Some states do not allow limits on warranties. In such states, the

above limitations may not apply to you.

Outside the USA, other warranties may apply.

ABOVE ALL ELSE, Snow Joe

+ Sun Joe

are dedicated to you, our customer. We strive to make your experience as pleasant

as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We

think it’s important that you know what you can expect from us. That’s why we created the Snow Joe

+ Sun Joe

promise.

OUR PROMISE: Snow Joe

+ Sun Joe

warrant new products for two years from the date of purchase. If your product does

not work, or there’s an issue with a specic part, we will x this by either sending you a free replacement part or by sending

you a new or comparable product at no charge. How cool is that! Before you know it, you’ll be back in action cutting,

sawing, mowing, washing and…?

snowjoe.com

mWARNING! This product or its power cord contains chemicals, including lead, known to the

State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

mWARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities

contains chemicals known [to the State of California] to cause cancer, birth defects, or other reproductive harm.

Some examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure

to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust

masks that are specically designed to lter out microscopic particles.

La page est en cours de chargement...

Sun Joe MJ401C-XR-SJB Manuel utilisateur

Marque: Sun Joe

Modèle: MJ401C-XR-SJB

Catégorie: Tondeuses à gazon

Taper: Manuel utilisateur

Ce manuel convient également à

MJ401C-XR

Télécharger le PDF

rapport

dans d''autres langues

English: Sun Joe MJ401C-XR-SJB User manual

Sun Joe MJ401C-XR-SJB Manuel utilisateur

Ce manuel convient également à

Sun Joe MJ401C-XR-SJB Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents