Baby Trend JG95 Manuel utilisateur

Marque: Baby Trend

Modèle: JG95

Catégorie: Poussettes

Taper: Manuel utilisateur

Read all instructions BEFORE assembly and USE of product.

KEEP INSTRUCTIONS FOR FUTURE USE.

Lea todas las instrucciones ANTES de armar y USAR el producto.

CONSERVE LAS INSTRUCCIONES PARA USO FUTURO.

Lisez toutes les instructions du manuel AVANT l’assemblage

ou L’UTILISATION de ce produit. CONSERVEZ CES

INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE.

www.babytrend.com

Convenience through innovation and thoughtful design

1-800-328-7363 (8:00am ~ 4:30pm PST)

www.babytrend.com

Baby Trend, Inc.

1607 S. Campus Ave., Ontario, CA 91761

JG95

Instruction Manual

Manual de Instrucciones

Manuel d’instruction

03.15

WARRANTY

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND

FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend

. warranty covers workmanship defects within the rst 180 days of

purchase. Any product which has been subjected to misuse, abuse, abnormal use,

excessive wear and tear, improper assembly, negligence, environmental exposure, alteration

or accident, or has had its serial number altered or removed invalidates all claims against

the manufacturer. Any damage to property during installation is the sole responsibility of the

end user. The Customer Service Department can be contacted at 1 (800) 328-7363 Monday

through Friday between 8:00am and 4:30 pm (PST). Return Authorizations are required prior

to returning product(s) to Baby Trend

. Warranty only valid in North America.

GARANTIA

NO DEVUELVA SU PRODUCTO A LA TIENDA. POR FAVOR CONTACTE A BABY TREND

PARA PIEZAS DE REPUESTO, SERVICIO Y REPARACION.

La garantía de Baby Trend

cubre defectos de fábrica dentro de los primeros 180 días de

la compra.Cualquier producto que haya sido sometido a uso indebido, abuso, uso anormal,

desgaste excesivo, montaje incorrecto, negligencia, exposición ambiental, alteración o

accidente, o que ha tenido su número de serie alterado o removido anula todos los reclamos

contra el fabricante. Cualquier daño a la propiedad durante la instalación es de la exclusiva

responsabilidad del usuario nal. El Departamento de Servicio al Cliente puede ser

contactado a 1 (800) 328-7363 Lunes a viernes entre 8:00 am y 4:30 pm (PST).Un numero

de autorizacion es requerido antes de la devolución de los producto(s) a Baby Trend®.

Garantia válida sólo en América del Norte.

GARANTIE

NE PAS RETOURNER VOTRE PRODUIT AU MAGASIN. VEUILLEZ CONTACTER BABY

TREND POUR DES PIÈCES DE RECHANGE, ENTRETIEN ET RÉPARATION.

La garantie Baby Trend

couvre les vices de fabrication dans les 180 jours suivant l'achat du

produit. Tout produit qui a été soumis à un usage abusif, une utilisation anormale, une usure

excessive, un montage incorrect, de la négligence, de l'exposition environnementale, de la

modication ou un accident, ou a eu son numéro de série modié ou supprimé annule toutes

les réclamations contre le fabricant. Tout dommage à la propriété lors de l'installation est de

la seule responsabilité de l'utilisateur nal. Le service client peut être contacté au 1 (800)

328-7363 du lundi au vendredi 8 h – 16 h 30 (PST). Une autorisation sera nécessaire avant

de retourner le produit à Baby Trend

. Garantie valable uniquement en Amérique du Nord.

PARTS

Table of Contents Índice Table des Matières

English 2

Parts 2

Warning 3

Assembly 4

Safety 8

Infant Car Seat 11

Fold / Unfold 12

Maintenance 13

Espanol 14

Piezas 14

Advertencia 15

Montaje 16

Seguridad 20

Sillita Para El Automóvil 23

Plegar / Desplegar 24

Mantenimiento 25

Français 26

Pièces 26

Avertissement 27

Assemblage 28

Sécurité 32

Siége d’auto 35

Plier / Déplier 36

Entretien 37

Rear Wheels

Front Wheel

Stroller

Child Tray Cup Holder

Axel Nuts

Retainer plate

Check that you have all the parts for this model before assembly.

ASSEMBLYWARNING

Remove stroller from box. The front wheel and

rear wheels MUST be installed prior to use.

FRONT WHEELS

To attach the front wheels, unfold stroller as

described in the section following:

1) • Unlock the release lever (Fig. 1a).

Unfold stroller frame by pulling backward

on the stroller handle. Lean the stroller

backwards so that it rests on the handle

and rear axle frame and the front wheel

forks are pointing upward (Fig. 1b).

2) • Slide the front wheel onto the front forks

(Fig. 2).

IMPORTANT! To ensure safe operation of your stroller, please

follow these instructions carefully. Please keep these instructions for future

reference.

IMPORTANT! Before assembly and each use, inspect this product for

damaged hardware, loose joints, missing parts or sharp edges. NEVER use if

any parts are missing or broken.

IMPORTANT! Adult assembly is required.

WARNING: Please follow all of these instructions to

ensure the safety of your child. Keep these instructions for

future reference.

WARNING: Failure to follow these instructions could

result in serious injury or death. Avoid serious injury from

falling or sliding out. Always use the safety harness and

insure that the children are properly positioned according

to these instructions.

WARNING: Never leave children unattended.

• CAUTION: This single stroller is designed for one child only. Use with more than one child

may cause the unbalance condition which can injure/ harm your child.

• Purses, shopping bags, parcels, diaper bags or accessory items may change the balance

of the stroller and cause hazardous unstable conditions.

• The maximum weight that can be carried in the basket is 5 lbs (2.26 kg), child tray and

parent tray are 3 lbs (1.36 kg) each. The maximum weight can be carried in the back

pocket is 3 lbs (1.36 kg). Excessive weight may cause a hazardous unstable condition

to exist.

• Be certain the stroller is fully erect and latched in the open position before allowing

children near the stroller.

• Use of the stroller with children weighing more than 50 pounds (22.67 kg) or over 42

inches (106.7 cm) tall, will cause excessive wear and stress on the stroller and may cause

a hazardous unstable condition to exist.

• NEVER use the stroller on stairways or escalators.

• NEVER use the stroller with roller skates, in-line skates, skateboards or bicycles.

• We recommend that the child occupant be at least 6 months of age prior to use of the

stroller for jogging. Because children develop at different rates, please discuss the use of

a jogging stroller with your health care provider prior to jogging with your child.

• NEVER allow your stroller to be used as a toy.

• To clean use only mild household soap or detergent and warm water on a sponge

or clean cloth.

• Check your stroller for loose screws, worn parts, torn material or stitching on a regular

basis. Replace or repair parts as needed.

• Discontinue use of stroller should it malfunction or become damaged. Please contact our

customer service Parts Hotline to arrange for repair or obtain replacement parts.

Fig. 1b

Fig. 1a

Fig. 2

ASSEMBLY ASSEMBLY

3) • Slide the retainer plate onto the front

wheel. Be sure that the raised lip is

pointing toward the fork and insert it

into the slot on the fork. The tab on the

retainer plate must be lined up with the

slot before tightening the wheel (Fig. 3).

4) • With the wheel in position, tighten the

axel nuts and tighten with standard

crescent, box, or open end wrench. You

should feel signicant resistance and

the wheel should be held tightly in place

(Fig. 4).

REAR WHEELS

• Rest the stroller upside down, on the handle.

•

Press the rear wheel posts into the rear

frame hub until it clicks into place (Fig. 5).

NOTE: Pull on the rear wheel to ensure

that it is securely attached to the stroller.

TIRES

6) • Tires are shipped un-inated. The tires

should be inated on a regular basis to

between 20 to 25 p.s.i. Always use a

bicycle style hand air pump to inate the

tires (Fig. 6). *not included.

CUP HOLDER

WARNING: To avoid

burns, never put hot liquids

in cup holder. Avoid possible

tipping, do not place more than

1 lb. (0.45kg) in cup holder.

7) • To attach cup holder: slide the clip

on the cupholder over Cup Holder tabs

on the Handle Bar. Push untill rmly in

place (Fig. 7).

CANOPY

8) •

To open the canopy: push forward on

the front edge of the canopy while holding

the rear of canopy in place (Fig. 8).

• To fold the canopy: pull backwards on

the front edge (Fig. 8).

SEATBACK POSITIONING

9) •

To recline the seat: loosen the strap

through the buckle and adjust to the

required recline position (Fig. 9a). To

place the seat back in a more upright

position, press upward on the seat back

with one hand while pulling the strap

through the buckle with the other (Fig. 9b).

Note: The upright position should be

used only for a child that is at least 6

months old. Always re-adjust the safety

harness, including the shoulder belts,

when repositioning the seatback.

Fig. 3

Retainer Plate

Axel Nut

Axel and Hub

Front Fork

Slot

Fig. 5

Fig. 6

Fig. 7

Fig. 8

Fig. 9b

Fig. 9a

Fig. 4

SAFETY

ASSEMBLY

BRAKES

WARNING: Always set

brakes when the stroller is not

being pushed so that the stroller

will not roll away. NEVER leave

stroller unattended on a hill or

incline as the stroller may slide

down the hill.

12) • To engage brakes, apply downward

pressure to the brake levers located on

the rear axle. The stroller may require

forward or rearward movement in order

to engage the brake (Fig. 12). Check

that the stroller will not move once the

brakes are properly applied. To release,

gently lift up on the brake levers.

FRONT WHEEL LOCK

WARNING: Always

lock the front swivel wheel

in STRAIGHT position before

placing or removing your

children from the stroller and

when walking fast or jogging.

13) • The front wheels are equipped with a

swivel locking device. Push the button

on each wheel upward to engage the

locks and push downward to disengage

the locking device (Fig. 13).

CHILD TRAY

WARNING: Do not

place hot liquids or more than

3 pounds in the child tray.

Serious burns or unstable

conditions could result.

10) • To attach the child tray: Push the

angled tray onto the post at the end of

the right armrest, until locked into place

(Fig. 10a).

• Rotate the tray downward until latched

onto the left armrest (Fig. 10b).

Note: Check that the snap button

comes through and securely latches

the tray in place.

• To access the child seat: Press inward

on left side tray release button and rotate

upward on the tray (Fig. 10c).

• To remove the child tray: Press the

release button and rotate the tray 180

degrees and pull the tray until it is

released (Fig. 10d).

BASKET

11) • Insert the female end of the rear basket

tube into the male ends located on the

basket frame until it locks into place

(Fig. 11).

Note: Stroller must be open rst, before

basket assembly.

Fig. 10a

Fig. 10b

Fig. 10c

Fig. 10d

Fig. 11

Rear basket tube

Basket frame

Fig. 12

Fig. 13

Lock

Unlock

SAFETY SAFETY

TO SECURE THE CHILD

WARNING: Avoid

serious injury from falling or

sliding out. Always use the

safety harness.

STRANGULATION

HAZARD: Child can

strangle in loose straps. Never

leave child in seat when straps

are loose or undone

Type 1 and 2

14) • The shoulder straps of the 5-point

harness have 3 attachment positions

(Fig. 14a). Select the position that

places the shoulder strap level with, or

below the top of the child’s shoulder

(Fig. 14b).

• Carefully place the child in the stroller

seat and bring the safety harness around

the child’s waist and over the shoulders.

Place the crotch strap between the

child’s legs. Insert the male end of each

shoulder/waist belt into the buckle on the

crotch strap. Tighten the harness to be

snug around the child’s waist and over

the child’s shoulders (Fig. 14c).

TO RELEASE THE CHILD

Type 1

15) • To release, push Button on Center

Clasp, the two Harness Buckles will pop

free (Fig. 15).

Type 2

16) • To release, apply pressure to both

sides of each male clip until the clip is

released (Fig. 16).

JOGGING WITH YOUR STROLLER

WARNING: Never jog

or run with your newborn in

the car seat position. Use for

strolling only.

When you are jogging with your child,

use the following safety features:

17) • LOCK THE FRONT SWIVEL WHEEL IN

STRAIGHT POSITION (Step 13)

• SAFETY WRIST STRAP: Always

connect the safety strap to either wrist

when jogging. This strap will keep the

stroller from rolling away in the event

that you trip while running (Fig. 17a).

The safety strap must remain connected

to the rear lower frame cross member

at all times. This location is intended

to prevent the stroller being tipped

backward in the event that you do fall to

the ground. The safety strap includes a

hook and loop attachment for storage,

on the left side of the stroller, when not

in use (Fig. 17b).

Fig. 14c

Fig. 14b

Shoulder Strap

Squeeze

Waist Strap

Crotch Strap

Adjust for a snug t

Type 2 Buckle

Adjust for a snug t

Type 1 Buckle

Fig. 14a

Fig. 17b

Fig. 17a

Fig. 15

Center Clasp

Type 1

Fig. 16

Type 2

FOLD / UNFOLD

INFANT CAR SEAT

TO FOLD STROLLER

CAUTION: Do not allow

children near stroller while

folding.

20) • Close the canopy as described in the

canopy section. Recline seat by releasing

buckle as described in seatback

positioning section.

• The stroller is folded by simultaneously

pulling each trigger (Fig. 20a). When the

fold latches are released, the handle will

begin to fall toward the oor. Release

the trigger and press downward on

the stroller handle until the stroller is

completely folded. Secure the stroller

in the folded position by locking the fold

latch, located on the right side of the

stroller, over the rivet that protrudes from

the frame (Fig. 20b).

TO UNFOLD STROLLER

CAUTION: Do not allow

children near stroller

while unfolding.

21) • Release the folding latch, which is

located on the right side (Fig. 21a).

• Lift up on the stroller handle with both

hands until the stroller frame is locked in

the open position (Fig. 21b). The stroller

has spring-loaded latches on both sides of

the frame. Test that both latches are fully

engaged prior to placing child in the stroller.

INFANT CAR SEAT ATTACHMENT

WARNING: Never jog

or run with your newborn in

the car seat position. Use for

strolling only.

WARNING: Avoid

serious injury from falling

or sliding out, always use

the Infant Car Seat harness.

18) •

Fully recline seat back and turn car seat

Support Tabs on the stroller frame (Fig 18a)

Note: Car Seat Support Tabs are Only

used for the infant car seat. Check that

the front child tray is rmly attached to

the stroller armrests.

• Position the infant car seat so that it

faces toward the rear of the stroller and

the seat shell goes into the front tray and

latches into place (Fig. 18b).

• When the infant car seat is locked rmly

into place, strap the single Short Clip

over the infant car seat through the seat

belt slot on the infant car seat (Fig. 18c).

Note: It is very important that the Short

Clip is always tightly fastened around the

infant car seat.

TO REMOVE INFANT CAR SEAT

19) • To remove the Infant Car Seat,

disengage Short Clip and squeeze the

release handle located at the foot-end of

the seat and carefully lift upward on the

seat (Fig. 19).

Fig. 18a

Fig. 18b

Fig. 18c

Short clip

Fig. 19

Fig. 20b

Fig. 20a

Fig. 21a

Fig. 21b

PIEZAS

MAINTENANCE

CARE AND MAINTENANCE

TESTING FOR PROPER WHEEL INSTALLATION

WARNING: ALWAYS

check the double nut locking

system before each use to

ensure that the front wheel is

securely fastened to the frame.

22) •

Lift the front wheel off of the ground and

sharply strike the top of the tire (Fig. 22).

The wheel should not be loose or come off.

If you experience front wheel wobble

that is beyond what is normal for use

while walking or jogging you may have

to adjust the front wheel housing nut.

23) • Remove footrest to access nut. You can

use a standard crescent wrench to tighten

the nut (Fig. 23).

DO NOT OVER TIGHTEN this can cause

damage to the wheel housing.

FENDER

If adjustment or replacement is necessary:

24) • Line up the front fender and press onto

the front frame assembly (Fig. 24a).

• Insert the 4 screws through the underside

of the front frame assembly into the front

fender’s plastic tubes. Tighten the screws

only until snug (Fig. 24b).

DO NOT OVER TIGHTEN.

SEAT PAD

• To clean the seat pad, use only mild

household soap or detergent and warm

water on a sponge or clean cloth.

OTHER

•

Check your stroller for loose screws, worn

parts, torn material or stitching on a regular

basis. Replace or repair parts as needed.

Fig. 24b

Fig. 22

Fig. 23

Fig. 24a

Ruedas traseras

Rueda delantera

Carrito

Bandeja para niños Portavasos

Tuerca del Eje

Placa de retención

Verique que tenga todas las piezas para este modelo

antes de montar el carrito.

Baby Trend JG95 Manuel utilisateur

Marque: Baby Trend

Modèle: JG95

Catégorie: Poussettes

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Baby Trend JG95 User manual

Baby Trend JG95 Manuel utilisateur

Baby Trend JG95 Manuel utilisateur

dans d''autres langues

Documents connexes