Greenworks 12 in Electric Snow Shovel Le manuel du propriétaire

Marque: Greenworks

Modèle: 12 in Electric Snow Shovel

Taper: Le manuel du propriétaire

Read all safety rules and instructions carefully before operating this tool.

www.greenworkstools.com/80V-PRO

Owner’s Manual

TOLL-FREE HELPLINE: 1(855)345-3934

12" 80V Cordless Snow Shovel

2601202

Contents .............................................................................................................................. 2

.......................................................................................................... 2

Safety information .............................................................................................................3-5

Symbols ............................................................................................................................6-7

Know your snow shovel ....................................................................................................... 8

Assembly ........................................................................................................................ 9-10

Operation .......................................................................................................................11-14

Charging procedure.................................................................................................................15

Checking battery capacity.......................................................................................................16

Environmentally safe battery disposal....................................................................................17

Maintenance ................................................................................................................. 18-22

Troubleshooting ................................................................................................................. 23

Warranty ............................................................................................................................ 24

Exploded View ................................................................................................................... 25

Parts List.......................................................................................................................26-27

PRODUCT SPECIFICATIONS

12" 80V CORDLESS SNOW SHOVEL

Motor .............................................................................................. 80V brushless motor

Battery type................................................................................................80V Lithium-ion

No-load speed .................................................................................................1800 RPM

Clearing width.................................................................................................12 in. (30 cm)

Clearing depth..................................................................................................4 in. (10 cm)

Impeller size....................................................................................................11 in. (28 cm)

Discharge distance................................................................................. ...........20 ft. (6 m)

Weight(without battery) ...................................................................................16 lbs (7.2 kg)

CONTENTS

Cold Weather Operation: Lithium Ion batteries can be safely used from temperatures ranging

from -17 degrees to 45 degrees Celsius. NOTE: Do not store or charge battery outside. Battery

must be charged and stored indoors prior to use of the snow thrower.

Battery may not properly start if it’s temperatures is -17˚C or lower. If unit does not start remove

battery from snow thrower. Place battery on charger and allow to charge for 10 minutes to allow

battery to warm. Remove from charger and install in Snow thrower for use.

SAFETY INFORMATION

• Walk. Do not run.

• Verify that the snow shovel is not in contact with anything before turning it on.

• Stay away from the discharge chute and impeller openings at all times. Keep face, hands, and

feet away from concealed, moving, or rotating parts.

• Be attentive when using the snow shovel, and stay alert for holes in the terrain and other

• Do not use the snow shovel on a gravel or crushed rock surface. Use extreme caution when

crossing gravel/crushed rock drives, walks, or roads.

• Move up and down slopes when clearing snow. Do not go across a slope. Use caution when

changing direction. Do not use this snow shovel to clear snow from steep slopes.

• Do not attempt to use the snow shovel on a roof or on any steeply inclined slippery surface.

• Do not operate the snow shovel if the guards, plates, and other safety protective devices are

not in place.

• Do not operate the snow shovel near glass enclosures, automobiles, trucks, window wells,

drop-offs, etc. without properly adjusting the angle of the snow discharge. Keep children and

pets away from the work area.

• Do not force or overload the snow shovel. The snow shovel will perform better and safer when

it is used at the rate that it was designed to work at.

• Do not operate the snow shovel at high speeds on slippery surfaces. Look behind when

backing up and exercise caution.

• Do not direct the discharge toward anyone. Do not allow anyone to move in front of the snow

shovel while it is in use.

• Wear safety glasses or goggles that meet ANSI Z87.1 standards.

•

• To avoid accidental start-ups, remain in the starting position when turning the snow shovel

on. The operator and the snow shovel must be in a stable position during start-up. See the

section titled Starting/Stopping Instructions.

• Use this snow shovel only for the purposes it was designed.

• Do not overreach. Always keep proper footing and balance.

•

• If the impeller does not rotate freely due to ice, thaw the snow shovel thoroughly before

attempting to use it.

• Keep the impeller clear of debris.

I M POR T ANT

READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below

ry.

FOLLOW THESE RULES WHILE OPERATING THE SNOW SHOVEL

SAFETY INFORMATION

• Do not attempt to clear the impeller while the motor is running.

• Keep clothing and body parts away from the impeller.

• Stop the motor when stopped or when moving from one location to another.

• Remove the battery pack when it is being transported and when it is not in use.

• After striking a foreign object, turn the snow shovel off and remove the battery pack, and then

inspect it for damage. Repair any damage before restarting and using the snow shovel.

• If the snow shovel starts to vibrate abnormally, stop the snow shovel immediately and attempt

to determine the cause. Vibration is generally an indication of danger.

• Stop the motor and remove the battery pack whenever the operator is not in the operating

position, before unclogging the impeller, and before making any repairs, adjustments, or

inspections.

• Do not discharge snow onto public roads or near moving trafc.

• Allow the snow shovel to run for a few minutes after clearing snow in order to prevent moving

parts from freezing.

• Only use identical replacement parts and accessories for this snow shovel. The use of

nonidentical parts or accessories could lead to serious injury to the user or damage the snow

shovel, and will void the warranty.

• Do not pick up the snow shovel while it is running. The snow shovel is designed to travel along

the ground.

• Dress Properly – Do not wear loose clothing or jewelry. They can be caught in moving parts.

• Wear suitable winter footwear when operating the snow shovel.

• Operation of the snow shovel in the hand-held position is unsafe, except in accordance with

the special instructions for such use provided in the operator’s manual.

• Store Idle Snow Shovel Indoors – When not in use, snow shovels should be stored indoors in

dry, locked-up place – out of reach of children.

GENERAL SAFETY RULES

• Verify that the snow shovel is secure while transporting.

• Store the snow shovel in a dry area that will prevent unauthorized use or damage. Keep out of

the reach of children.

• Keep handles dry, clean, and free of debris. Clean the snow shovel after each use. Refer to

the Maintenance Section in this manual for more information.

• If the labels on the snow shovel become defaced or start to lift off, contact the toll-free

helpline, at 1(855)345-3934.

• Keep these instructions in a safe place for future reference. Refer to them often, and use

them to instruct other users. Anyone who uses this snow shovel must read these instructions

carefully.

• Maintain the snow shovel with care. Follow the instructions for lubricating and changing

accessories.

CONTENTS

CAUTION

USE ONLY GREENWORKS APPROVED REPLACEMENT BATTERIES, OTHER BATTERIES

MAY CAUSE INJURY OR DAMAGE TO THE SNOW SHOVEL. USE ONLY WITH

GREENWORKS 80V BATTERIES (Model#: 2901302) and GREENWORKS 80V CHARGER

(Model#: 2901402).

WARNING(PROPOSITION65)

Some dust created by power sanding, sawing, grinding, drilling and other construction activities

contains chemicals known to the state of California to cause cancer, birth defects or other

reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints,

• Crystalline silica from bricks and cement and other masonry products, and

• Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To

reduce your exposure to these chemical: work in a well ventilated area, and work with approved

safety equipment, such as those dust masks that are specially designed to lter out microscopic

particles.

SAFETY INFORMATION

Some of the following symbols may be used on this product. Please study them and learn their

meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.

SYMBOLS

SYMBOL DESIGNATION/EXPLANATION

V Voltage

A Current

Hz Frequency (cycles per second)

Wh Watt Hour - Energy Storage Capacity

Ah Amp Hour - Current Capacity

DC Direct current

Type or a characteristic of current

RPM Revolutions per minute

Double-insulated construction

/min Revolutions, strokes, surface speed, orbits etc., per minute

Indicates a potential personal injury hazard.

To reduce the risk of injury user must read and understand operator’s manual

before using this product.

Wear ear protection at all times while operating the machine.

Always wear eye protection with side shields marked to comply with ANSI Z87.1

when operating this equipment.

Thrown objects can ricochet and result in personal injury or property damage.

Keep hands and feet away.

Danger – Keep hands and feet away from openings while the machine is running.

Do not use hands to unclog chute. Stop motor and remove the battery before

removing debris.

Keep bystanders a safe distance from the machine.

Stop the motor and remove the battery before leaving the machine.

Keep hands, feet away from the discharge area.

Stay away from moving parts. Keep all guards and shields in place.

The following signal words and meanings are intended to explain the levels of risk associated

with this product.

SERVICE

Servicing requires extreme care and knowledge and should be performed only by a qualied

service technician. For service we suggest you return the product to your nearest AUTHORIZED

SERVICE CENTER for repair. When servicing, use only identical replacement parts.

WARNING

To avoid serious personal injury, do not attempt to use this product until you have read this

Owner's Manual thoroughly and understand it completely. If you do not understand the warnings

and instructions in this Owner's Manual, do not use this product. Call the Toll-free Helpline

(1(855)345-3934) for assistance.

WARNING

The operation of any power tool can result in foreign objects being thrown into your

eyes, which can result in severe eye damage. Before beginning power tool operation,

always wear safety goggles or safety glasses with side shields and, when needed, a

full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or

standard safety glasses with side shields. Always use eye protection which is marked

to comply with ANSI Z87.1.

SYMBOL SIGNAL MEANING

DANGER Indicates an imminently hazardous situation, which, if not

avoided, will result in death or serious injury.

WARNING Indicates a potentially hazardous situation, which, if not avoided,

could result in death or serious injury.

CAUTION Indicates a potentially hazardous situation, which, if not avoided,

may result in minor or moderate injury.

CAUTION (Without Safety Alert Symbol) Indicates a situation that may

result in property damage.

SYMBOLS

SAVE THESE INSTRUCTIONS

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste.

Please recycle where facilities exist. Check with your local authority or retailer

for recycling advice. The battery contains material which is hazardous to you and

the environment. It must be removed and disposed of separately at a facility that

accepts lithium-ion batteries.

KNOW YOUR SNOW SHOVEL

Fig. 1

Read this operator's manual and safety rules before operating your snow shovel. Compare the

illustration in Figure 1 to your snow shovel in order to familiarize yourself with the location of

various controls and adjustments. Save this manual for future reference.

Auxiliary handle

Trigger switch

Lock-out button

Lock knob

Belt drive cover

Impeller

Scraper

Battery compartment

UNPACKING

• Carefully remove the product and any accessories from the box. Make sure that all items

listed in the packing list are included.

• Inspect the product carefully to make sure no breakage or damage occurred during shipping.

• Do not discard the packing material until you have carefully inspected and satisfactorily

operated the product.

• If any parts are damaged or missing, please call 1(855)345-3934 for assistance.

PACKING LIST

• Snow shovel

• Owner's Manual

WARNI N G

If any parts are damaged or missing, do not operate this product until the parts are replaced.

Failure to heed this warning could result in serious personal injury.

WARNI N G

Do not connect to power supply until assembly is complete. Failure to comply could result in

accidental starting and possible serious personal injury.

WARNI N G

Do not attempt to modify this product or create accessories not recommended for use with this

leading to possible serious personal injury.

ASSEMBLY INSTRUCTIONS

CONNECTING THE SHAFTS (See Figure 2-3)

• Align the pin on the handle shaft and the hole on the lower shaft. (Fig. 2).

• Once the two shafts are secure, turn the lock knob clockwise until it is fully tightened. (Fig. 3).

Fig. 3Fig. 2

Lower shaft

Handle shaft

Hole

Lock knob

OPERATING INSTRUCTIONS

TO INSTALL BATTERY PACK (See Figure 4)

• Slide the battery (1) down to lock it into position. The battery is fully inserted into the snow

shovel when you hear an audible “click”.

TO REMOVE BATTERY PACK (See Figure 4)

• Release the trigger switch. The lock-out button will pop out, and the snow shovel will stop.

• Press and hold the battery latch button (2) at the rear handle.

• Remove battery pack from the snow shovel.

Fig. 4

(NOT INCLUDED)

CONTENTS

OPERATING INSTRUCTIONS

groove

Fig. 5

raised points

ADJUST THE AUXILIARY HANDLE HEIGHT (See Figures 5)

• Loosen the bolts until the auxiliary handle is no longer secured.

• Move the auxiliary handle to the height you prefer, make sure the raised points on the auxiliary

handle are aligned with the groove on one side of the handle shaft.

• Once the handle is set to desired setting, tighten the bolts with a phillips screwdriver until

auxiliary handle is secured.

CONTENTS

STARTING THE SNOW SHOVEL (See Figures 6-7)

In order to avoid serious injury, the operator and unit must be in a stable position when starting

the snow shovel.

Follow this sequence exactly in order to start the snow shovel.

• Verify that the battery pack is inserted into the battery compartment.

• Press and hold the lock-out button (Fig. 6).

• While holding the lock-out button, press and hold the trigger switch.

NOTE: The Snow Shovel will not start if the lock-out button is not held until the trigger switch is lifted. Once

trigger is pressed and unit is started, release the lock-out button.

• Hold the handles and begin to use the snow shovel (Fig.7).

STOPPING THE SNOW SHOVEL

• Release the trigger switch.

• The lock-out button will pop out, and the snow shovel will stop.

OPERATING INSTRUCTIONS

Fig. 7

Fig. 6

Lock-Out

Button

Trigger

USING THE SNOW SHOVEL (See Figures 8)

• Start the snow shovel by following the Starting Instructions. The depth and weight of the snow

will determine the forward speed.

• Push the snow shovel forward so that it rides on the scraper.

OPERATING INSTRUCTIONS

Fig. 8

scraper

NOTE: The battery is not shipped fully charged. It is recommended to fully charge the battery before rst use

to ensure that maximum run time can be achieved. This lithium-ion battery will not develop a memory and

may be charged at any time.

Low voltage charging:

If the battery has been stored with little to no charge for a long period of time, the charger will go

into recovery mode, which will take 20 hrs to fully charge the battery. This will enhance the life of

the battery. Once it is fully charged, the next charge will return to standard charging.

A fully discharged battery pack will require approximately 30 minutes to fully charge from a

discharged state.

• Plug the charger into an AC power outlet.

• Insert the battery into the charger.

This is a diagnostic charger. The Charger LED Lights will illuminate in specic order to

communicate the current battery status. They are as follows:

False defect note:

When the battery is inserted into the charger and the status LED blinks RED, remove the battery

from the charger for 1 minute, then reinsert. If the status LED blinks GREEN, then the battery is

properly charging. If the status LED is still blinking RED, remove the battery and unplug the

charger for 1 minute. After 1 minute, plug in the charger and reinsert the battery. If the status

LED blinks GREEN, then the battery is properly charging. If the status LED is still blinking RED,

the battery is defective and needs to be replaced.

CHARGING PROCEDURE

Charging Fully

Charged Over

Temperature Charging

Fault

LED STATUS DESCRIPTION

Blinking GreenC harging

Solid Green Fully Charged

Solid Red Over Temperature

Blinking RedC Charging Fault

BATTERY CAPACITY

INDICATOR (BCI) BUTTON LIGHT METER

Lights

Capacity

The battery is more than 75% capacity

3 Green Lights

The battery is between 35% and 75% capacity 2 Green Lights

The battery is less than 35% capacity

1 Green Light

Lights go out

The battery requires charging immediately

that maximum run time can be achieved. This lithium-ion battery will not develop a memory and may be

charged at any time. A fully discharged battery pack will require approximately 30 minutes to fully charge

from a discharged state.

Press the battery capacity indicator (BCI) button. The lights will illuminate according to the

batteries current power level. See chart below:

CHECKING BATTERY CAPACITY

BATTERY PACK

• Store the battery pack fully charged.

• Once the charging light turns green, remove the battery from the charger.

• Do not store the battery pack on the tool.

• After charging, the battery pack may be stored in the charger, as long as the charger is not

plugged in.

CHARGER MAINTENANCE

• Keep the charger clean and clear of debris. Do not allow foreign material to get into the

recessed cavity or onto the contacts. Wipe the charger clean with a dry cloth. Do not use

solvents or water, and do not place the charger in wet conditions.

• Unplug the charger when there is no battery pack in it.

• Fully charge the batteries before placing them in storage.

• Store the charger at normal room temperature. Do not store it in excessive heat. Do not use

the charger in direct sunlight. Recharge at room temperature between 45˚F and 100˚F (7˚C

and 38˚C). If the battery pack is hot, allow it to cool down before recharging.

The following toxic and corrosive materials are in the batteries used in this tool battery pack:

Li-ion, a toxic material.

WARNI N G

environment. Before disposing of damaged or worn out Lithium-ion battery packs, contact

your local waste disposal agency, or the local Environmental Protection Agency for information

for Li-ion disposal.

WARNI N G

If the battery pack cracks or breaks, with or without leaks, do not recharge it and do not use.

Dispose of it and replace with a new battery pack. DO NOT ATTEMPT TO REPAIR IT!

environment:

• Cover the battery's terminals with heavy-duty adhesive tape.

• DO NOT attempt to remove or destroy any of the battery pack components.

• DO NOT attempt to open the battery pack.

• If a leak develops, the released electrolytes are corrosive and toxic. DO NOT get the solution

in the eyes or on skin, and do not swallow it.

• DO NOT place these batteries in your regular household trash.

• DO NOT incinerate.

•

stream.

•

ENVIRONMENTALLY SAFE BATTERY DISPOSAL

• Do not use a battery pack that is damaged or modified. Damaged or modified batteries may

exhibit unpredictable behavior resulting in fire, explosion or risk of injury.

MAINTENANCE

SERVICING

Servicing should be performed by a qualied technician. Replacement parts for this snow

shovel must be identical to the parts that they replace. If repairs are necessary, contact the

Toll-Free Helpline, at 1(855) 345 - 3934.

REPLACING THE SCRAPER (See Figure 9-10)

WARNING

IN ORDER TO AVOID SERIOUS PERSONAL INJURY, TURN THE SNOW SHOVEL

OFF AND REMOVE BATTERY BEFORE PERFORMING ANY MAINTENANCE.

Use only the manufacturer's original replacement parts.

• Place the snow shovel on the ground or on a work bench. Position the snow shovel so that

the impeller is facing up.

• Remove the four (4) screws that are located beneath the impeller that secure the scraper

to the housing using a phillips screwdriver. (Fig. 9).

• Remove the scraper, and discard it in the proper manner. (Fig. 10).

• Snap the new scraper into position, and attach it to the snow shovel by reinstalling the

four (4) screws.

scraper

Fig. 10

screws

scraper

Fig. 9

MAINTENANCE

STORAGE

• Allow the motor to cool down before storing.

• Store the snow shovel in a locked location in order to prevent unauthorized use or damage.

• Store the snow shovel in a dry, well-ventilated area.

• Store the snow shovel out of the reach of children.

CLEANING

In order to avoid serious personal injury, turn the snow shovel off and remove battery before

cleaning or servicing.

Use a small brush to clean the outside of the snow shovel. Do not use strong detergents.

Household cleaners that contain aromatic oils such as pine and lemon, and solvents such as

kerosene can damage the plastic housing and handles. Wipe off any moisture using a soft cloth.

MAINTENANCE

TRANSPORTING THE SNOW SHOVEL (See Figure 11)

• Allow the motor to cool down before transporting.

• Secure the snow shovel while transporting.

• When moving the snow shovel, grasp it by the top handle and auxiliary handle. (Fig. 11).

Fig. 11

La page charge ...

Greenworks 12 in Electric Snow Shovel Le manuel du propriétaire

Marque: Greenworks

Modèle: 12 in Electric Snow Shovel

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Greenworks 12 in Electric Snow Shovel Owner's manual
español: Greenworks 12 in Electric Snow Shovel El manual del propietario

Greenworks 12 in Electric Snow Shovel Le manuel du propriétaire

Greenworks 12 in Electric Snow Shovel Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents