SUN GLOW Roller Shade Manuel utilisateur

Marque: SUN GLOW

Modèle: Roller Shade

Taper: Manuel utilisateur

www.mysunglow.com

Roller Shade - Curved Cassette &

Compact Curved Cassette

Installation Instructions

Installation Instructions | Curved Cassettes | 2022-04-29 1 of 2

WARNING MISE EN GARDE

STRANGULATION HAZARD — Young children

can be strangled by cords. Immediately remove this

product if a cord longer than 22 cm or a loop

exceeding 44 cm around becomes accessible.

RISQUE D’ÉTRANGLEMENT — Les enfants en bas

âge peuvent s’étrangler avec des cordes. Enlevez

immédiatement ce produit si une corde mesurant

plus de 22 cm devient accessible ou si le contour

d’une boucle de plus de 44 cm devient accessible.

1PREPAR ATION

Component List

Curved Cassette

Compact Curved Cassette A. Shade

B. Mounting Brackets

C. Chain Tension Device

2DETERMINE NUMBER OF BRACKETS

Shade Width <60” 60” to 96” 96” to 120” 120” to 148” >148”

# of Brackets 23456

• Determine the proper position for each bracket. The outside brackets should be no further than 2” from the ends of the cassette.

• The brackets should be securely mounted and equally spaced for the width of the shade.

• It is important that the mounting brackets be installed level and aligned to each other. Shimming may be required.

Roller Shade

Curved Cassette & Compact Curved Cassette Installation Instructions

www.mysunglow.com

Installation Instructions | Curved Cassettes | 2022-04-29 2 of 2

MOUNT THE BRACKETS

CEILING MOUNT WALL MOUNT

For ceiling mount applications, please ensure that you leave a ¼”

between the wall and the mounting bracket to facilitate mounting and

dismounting.

For wall mount applications, please ensure that you leave a ¼”

between the ceiling and the mounting bracket to facilitate mounting

and dismounting.

¼”

* 50mm bracket may vary in shape

4INSTALL THE SHADE

• With the curved face of the cassette facing you, (1) insert the back edge of the cassette onto the bottom of each mounting bracket, as

shown below.

• (2) Starting from the center of the shade, push the cassette back and up until the cassette snaps into the top tab of the mounting bracket.

• (3) You should hear an audible click as the cassette snaps in to the mounting brackets. Repeat this process for each bracket.

*click*

5INSTALL THE SAFETY SHIELD

NOTE: For shades with chain operation only.

Ensure that Safety Shield is carefully and properly installed.

SUN GLOW Roller Shade Manuel utilisateur

Marque: SUN GLOW

Modèle: Roller Shade

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: SUN GLOW Roller Shade User manual

Documents connexes