Panasonic UT-MB5 Mode d'emploi

Marque: Panasonic

Modèle: UT-MB5

Catégorie: Des cahiers

Taper: Mode d'emploi

Contents

OPERATING INSTRUCTIONS

Personal Computer

Model No.

UT-MB5000

series

Introduction .................................................................

Description of Parts ....................................................

First-time Operation ..................................................

Turning On / Turning Off ...........................................

Useful Information

Handling and Maintenance .......................................

Installing Software ....................................................

Troubleshooting

Troubleshooting (Basic) ............................................

Appendix

LIMITED USE LICENSE AGREEMENT ...................

Specications ...........................................................

LIMITED WARRANTY ..............................................

Please read these instructions carefully before using this product, and save this manual for future use.

Getting Started

Useful Information

TroubleshootingAppendix Read Me First

Getting Started

Safety Precautions .....................................................

Regulatory Information ...............................................

Read Me First

DFQW5829ZA_UT-MB_8_OI_M.indb 1 2013/11/14 11:41:58

Read Me First

Safety Precautions

To reduce the risk of injury, loss of life, electric shock,

re, malfunction, and damage to equipment or property,

always observe the following safety precautions.

Explanation of symbol word panels

The following symbol word panels are used to classify

and describe the level of hazard, injury, and property

damage caused when the denotation is disregarded and

improper use is performed.

DANGER

Denotes a potential hazard that will result in serious

injury or death.

WARNING

Denotes a potential hazard that could result in seri-

ous injury or death.

CAUTION

Denotes a hazard that could result in minor injury.

NOTICE

Denotes a hazard that could result in property dam-

age.

The following symbols are used to classify and describe

the type of instructions to be observed.

This symbol is used to alert users to a specic

operating procedure that must not be performed.

This symbol is used to alert users to a specic

operating procedure that must be followed in

order to operate the unit safety.

DANGER

Precautions on the Built-in Battery

(for disposal)

When disposing the battery, generation of heat, igni-

tion or rupture of the Built-in Battery may result.

Handling This Computer



Do Not Disassemble the Computer Except

When Disposing

Handling the Built-in Battery



Do Not Short the Positive (+) and Negative

(-) Contacts



Do Not Throw the Battery into a Fire or

Expose It to Excessive Heat



Do Not Apply Shocks to the Built-in Bat-

tery by Dropping It, Applying Strong Pres-

sure to It, etc.



Do Not Charge



Do Not Use with Any Other Product



Do Not Insert Sharp Objects Into the Bat-

tery, Disassemble, or Modify It



Avoid Extreme Heat (Near the Fire, in Direct

Sunlight, for Example)

WARNING

Generation of heat, ignition or rupture of the Built-in

Battery may result.



Do Not Throw This Product Into a Fire or

Expose It to Excessive Heat



Do Not Insert Sharp Objects Into This

Product, Disassemble, or Modify It



Do Not Apply Shocks to the Product by

Dropping It, Applying Strong Pressure to

It, etc.



Do Not Charge the Battery Using Methods

Other Than Those Specified



Avoid Extreme Heat (Near the Fire, in Di-

rect Sunlight, for Example)



When the Battery Has Deteriorated, Con-

tact Your Technical Support Office to Re-

place the Battery

DFQW5829ZA_UT-MB_8_OI_M.indb 2 2013/11/11 11:15:57

Read Me First

WARNING

Fire or electric shock may result.



Do Not Do Anything That May Damage the

AC Cord, the AC Plug, or the AC Adaptor

Do not damage or modify the cord, place it

near hot tools, bend, twist, or pull it force-

fully, place heavy objects on it, or bundle it

tightly.

Do not continue to use a damaged AC cord,

AC plug and AC adaptor.

• Contact your technical support ofce for

repair.



Do Not Connect the AC Adaptor to a Power

Source Other Than a Standard Household

AC Outlet

Connecting to a DC/AC converter (inverter)

may damage the AC adaptor. On an air-

plane, only connect the AC adaptor/charger

to an AC outlet specically approved for

such use.



Do Not Pull or Insert the AC Plug If Your

Hands Are Wet



Do Not Disassemble This Product



Do Not Touch This Product In a Thunder-

storm If Connected with the AC Cable or

Any Other Cables



Do Not Place Containers of Liquid or Metal

Objects on Top of This Product

If foreign matter has found its way inside,

immediately turn the power off and unplug

the AC plug and remove the battery pack.

Then contact your technical support ofce.



If a Malfunction or Trouble Occurs, Imme-

diately Stop Use

If the Following Malfunction Occurs, Imme-

diately Unplug the AC Plug

• This product is damaged

• Foreign object inside this product

• Smoke emitted

• Unusual smell emitted

• Unusually hot

After the above procedure, contact your

technical support ofce for repair.



Clean Dust and Other Debris of the AC

Plug Regularly

• If dust or other debris accumulates on the

plug, humidity, etc. may cause a defect in the

insulation.



Insert the AC Plug Completely

Do not use a damaged plug or loose AC

outlet.

Burns or low-temperature burns may result.



Do Not Use This Product in Close Contact

With Your Body For a Long Period of Time

• Do not use this product with its heat-emitting

parts in close contact with your body for long

periods of time.

• Low-temperature burns may result.



Do Not Touch The Surface of The AC Adap-

tor Continuously While Using/Charging

• Burns may result.



Do Not Expose Yourself or Other Persons

to the Hot Wind from the Ventilation Hole

(Exhaust) For a Long Period of Time

• Depending on the direction of the computer

or the way you hold the computer, your

hands and body will be more exposed to the

hot wind.

• Covering the ventilation hole (exhaust) with

your hand or other object can cause heat to

build up inside, possibly resulting in burns.

Detrimental health effects on your body may result.



Do Not Turn the Volume Up To Loud When

Using Headphones

• Listening at high volumes that overstimulate

the ear for long periods of time may result in

loss of hearing.

CAUTION

Fire or electric shock may result.



Do Not Move This Product While the AC

Plug Is Connected

If the AC cord is damaged, unplug the AC

plug immediately.



Do Not Subject the AC Adaptor To Any

Strong Impact

Do not continue to use the AC adaptor after

a strong impact such as being dropped.

Contact your technical support ofce for

repair.



Do Not Leave This Product in High Tem-

perature Environment for a Long Period of

Time

• Leaving this product where it will be exposed

to extremely high temperatures such as near

re or in direct sunlight may deform the cabi-

net and/or cause trouble in the internal parts.



Do Not Block the Ventilation Hole (Exhaust/

Intake)

Do not use this product wrapped in cloth or

on top of bedding or a blanket.



Do Not Keep This Product Wherever There

is a Lot of Water, Moisture, Steam, Dust,

Oily Vapors, etc.

Fire or electric shock may result.



Hold the Plug When Unplugging the AC

Plug



Use Only the Specified AC Adaptor With

This Product

Do not use an AC adaptor other than the

one supplied (supplied with the unit or one

sold separately as an accessory).

DFQW5829ZA_UT-MB_8_OI_M.indb 3 2013/11/11 11:15:57

Read Me First

Safety Precautions

This product may fall over or drop, resulting in an

injury.



Do Not Place This Product on Unstable

Surfaces



Avoid Stacking

Detrimental health effects on your body may result.



Take a Break Of 10-15 Minutes Every Hour

• Using this product for long periods of time

may have detrimental health effects on the

eyes or hands.

NOTICE

Do not place the computer near a television or radio

receiver.

Keep the computer away from magnets. Data stored

on the ash memory may be lost.

This computer is not intended for the display of images

for use in medical diagnosis.

This computer is not intended for a use with connec-

tion of medical equipment for the purpose of medical

diagnosis.

Panasonic shall not be liable for loss of data or other

incidental or consequential damages resulting from

the use of this product.

If this computer will not be used for a long period of

time (a month or more), charge or discharge (use) the

battery until the remaining battery level becomes 30%

to 40% and store the product in a cool, dry place.

This computer prevents overcharging of the battery by

recharging only when the remaining power is less than

approx. 95% (when Economy Mode (ECO) is enabled:

75%) of capacity.

The battery is not charged when this computer is rst

purchased. Be sure to charge it before using it for the

rst time. When the AC adaptor is connected to this

computer, charging begins automatically.

Should the battery leak and the uid get into your

eyes, do not rub your eyes. Immediately ush your

eyes with clear water and see a doctor for medical

treatment as soon as possible.

NOTE

The battery may become warm during recharging or

normal use. This is completely normal.

Recharging will not commence if internal temperature

of the battery is outside of the allowable temperature

range (0 °C to 50 °C). (

Reference Manual “Bat-

tery Power”) Once the allowable range requirement is

satised, charging begins automatically. Note that the

recharging time varies based on the usage conditions.

(Recharging takes longer than usual when the tem-

perature is 10 °C or below.)

If the temperature is low, the operating time is short-

ened. Only use the computer within the allowable

temperature range.

The battery is a consumable item. If the amount of

time the computer can be run by using a particular

battery becomes dramatically shorter and repeated

recharging does not restore its performance, the bat-

tery should be replaced with a new one. Contact your

technical support ofce.

Always power off the computer when it is not in use.

Leaving the computer on when the AC adaptor is not

connected will exhaust the remaining battery capacity.

THIS PRODUCT IS NOT INTENDED FOR USE AS, OR

AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR

TRAFFIC CONTROL EQUIPMENT/SYSTEMS, AIR-

CRAFT COCKPIT EQUIPMENT/SYSTEMS

, MEDICAL

DEVICES OR ACCESSORIES

, LIFE SUPPORT SYS-

TEMS OR OTHER EQUIPMENTS/DEVICES/SYSTEMS

THAT ARE INVOLVED WITH ENSURING HUMAN

LIFE OR SAFETY. PANASONIC WILL NOT BE RE-

SPONSIBLE FOR ANY LIABILITY RESULTING FROM

THE USE OF THIS PRODUCT ARISING OUT OF THE

FOREGOING USES.

AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include

Class2 Electronic Flight Bag (EFB) Systems and Class1 EFB

Systems when used during critical phases of ight (e.g., dur-

ing take-off and landing) and/or mounted on to the aircraft.

Class1 EFB Systems and 2 EFB Systems are dened by

FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Tem-

porary Guidance Leaets) No.36.

As dened by the European Medical Device Directive (MDD)

93/42/EEC.

Panasonic cannot guarantee any specications, tech-

nologies, reliability, safety (e.g. Flammability/Smoke/

Toxicity/Radio Frequency Emission, etc) requirements

related to aviation standards that exceed the specica-

tions of our COTS (Commercial-Off-The-Shelf) products.

This computer is not intended for use in medical equip-

ment including life-support systems, air trafc control

systems, or other equipment, devices or systems that are

involved with ensuring human life or safety. Panasonic

cannot be held responsible in any way for any damages

or loss resulting from the use of this unit in these types of

equipment, devices or systems, etc.

This computer has been designed so as to minimize

shock to the LCD, the leakage of liquid (e.g., water) on

to the buttons, etc., but no warranty is provided against

such trouble. Therefore, as a precision instrument, be

extremely careful in the handling.

DFQW5829ZA_UT-MB_8_OI_M.indb 4 2013/11/11 11:15:57

Read Me First

Information to the User / Informations destinées aux utilisateurs

This product and your Health

This product, like other radio devices, emits radio fre-

quency electromagnetic energy. The level of energy

emitted by this product however is far much less than the

electromagnetic energy emitted by wireless devices like

for example mobile phones.

Because this product operates within the guidelines found

in radio frequency safety standards and recommenda-

tions, we believe this product is safe for use by consum-

ers. These standards and recommendations reect the

consensus of the scientic community and result from

deliberations of panels and committees of scientists who

continually review and interpret the extensive research

literature.

In some situations or environments, the use of this prod-

uct may be restricted by the proprietor of the building or

responsible representatives of the organization. These

situations may for example include:

Using this product on board of airplanes, or

In any other environment where the risk of interference

to other devices or services is perceived or identied

as harmful.

If you are uncertain of the policy that applies on the use

of wireless devices in a specic organization or environ-

ment (e.g. airports), you are encouraged to ask for autho-

rization to use this product prior to turning on the product.

Regulatory Information

We are not responsible for any radio or television interfer-

ence caused by unauthorized modication of this product.

The correction of interference caused by such unauthor-

ized modication will be the responsibility of the user. We

and its authorized resellers or distributors are not liable

for damage or violation of government regulations that

may arise from failing to comply with these guidelines.

26-M-1

<Uniquement pour les modèles avec réseau local sans l

et/ou Bluetooth>

Ce produit et votre santé

Ce produit, comme tout autre appareil radio, émet de

l’énergie radioélectrique. Toutefois, la quantité d’énergie

émise par ce produit est beaucoup moins importante que

l’énergie radioélectrique émise par des appareils sans

l tels que les téléphones portables. L’utilisation de ce

produit ne comporte aucun risque pour le consommateur

du fait que cet appareil opère dans les limites des direc-

tives concernant les normes et les recommendations de

sécurité sur les fréquences radio. Ces normes et recom-

mandations reètent le consensus de la communauté

scientique et résultent de délibérations de jurys et comi-

tés de scientiques qui examinent et interprètent conti-

nuellement les nouveautés de la vaste littérature sur les

recherches effectuées. Dans certaines situations ou envi-

ronnements, l’utilisation de ce produit peut être restreinte

par le propriétaire du bâtiment ou par les représentants

responsables de l’organisation. Ces situations peuvent

être les suivantes par exemple :

A bord d’un avion, ou

Dans tout autre environnement où les risques d’inter-

férence sur d’autres appareils ou services sont perçus

ou identiables comme dangereux.

Si vous n’êtes pas sûr de la réglementation applicable à

l’utilisation d’appareils sans l dans une organization

ou un environnement spécique, (par exemple dans un

aéroport) nous vous invitons à demander l’autorisation

d’utiliser ce produit avant sa mise en marche.

Informations concernant la réglementation

Nous déclinons toute responsabilité pour toute interfé-

rence radio ou télévision causée par des modications

non autorisées apportées à ce produit. La correction

d’interférences causées par de telles modications non

autorisées sera la seule responsabilité de son utilisateur.

Nousmêmes, les revendeurs ofciels et les distributeurs

ne sommes pas responsable de tout dégât ou de toute

violation des règlements de l’État pouvant découler du

non-respect de ces directives.

26-F-1

Regulatory Information

Lithium Battery / Pile au lithium

Lithium Battery!

This computer contains a lithium battery to enable the

date, time, and other data to be stored. The battery should

only be exchanged by authorized service personnel.

Warning!

A risk of explosion from incorrect installation or misappli-

cation may possibly occur.

15-E-1

Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui

permet de sauvegarder certaines données, notamment la

date et l’heure. La pile ne doit être remplacée que par un

technicien qualié.

Danger ! Risque d’explosion en cas de non respect de

cette mise en garde!

15-F-1

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols are only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask

for the correct method of disposal.

53-M-1

DFQW5829ZA_UT-MB_8_OI_M.indb 5 2013/11/11 11:15:57

Read Me First

Regulatory Information

For U.S.A.

Federal Communications Commission Radio Fre-

quency Interference Statement

Note: This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment gener-

ates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit dif-

ferent from that to which the receiver is connected.

Consult the Panasonic Service Center or an experi-

enced radio/TV technician for help.

Warning

To assure continued compliance, use only shielded inter-

face cables when connecting to a computer or peripheral.

Also, any changes or modications not expressly ap-

proved by the party responsible for compliance could void

the user’s authority to operate this equipment.

FCC RF Exposure Warning:

This equipment is provided with PC Card slot that could

be used with wireless transmitters, which will be speci-

cally recommended when they become available.



Other third-party wireless transmitters have not been

RF exposure evaluated for use with this computer and

may not comply with FCC RF exposure requirements.

This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment.

This equipment may not be co-located or operated

with any other antenna or transmitter.

This device meets the government’s requirements for

exposure to radio waves.

This device is designed and manufactured not to

exceed the emission limits for exposure to radio fre-

quency (RF) energy set by the Federal Communica-

tions Commission of the U.S. Government.

The exposure standard for wireless device employs a

unit of measurement known as the Specic Absorption

Rate, or SAR. The SAR limit set by the FCC is

1.6 W/kg.



* Tests for SAR are conducted using standard operat-

ing positions accepted by the FCC with the device

transmitting at its highest certied power level in all

tested frequency bands.

Although the SAR is determined at the highest certi-

ed power level, the actual SAR level of the device

while operating can be well below the maximum

value. This is because the device is designed to op-

erate at multiple power levels so as to use only the

poser required to reach the network. In general, the

closer you are to a wireless base station antenna,

the lower the power output.

This product is restricted to indoor use due to its operation

in the 5.15 to 5.25

GHz

frequency range. FCC requires this

product to be used indoors for the frequency range 5.15 to

5.25

GHz

to reduce the potential for harmful interference

to co-channel Mobile Satellite systems. High power radars

are allocated as primary users of the 5.25 to 5.35

GHz

and

5.65 to 5.85

GHz

bands. These radar stations can cause

interference with and/or damage this product.

25-M-W-1

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2)

This device must accept any interference received, in-

cluding interference that may cause undesired operation.

Responsible Party: Panasonic Corporation of North America

Two Riverfront Plaza,

Newark NJ 07102

Tel No:1-800-LAPTOP5 (1-800-527-

8675)

6-M-1

CAUTION:

Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.

58-E-1

ATTENTION:

Il y a risque d’explosion si la batterie est remplacée par une batterie de type incorrect.

Mettre au rebut les batteries usagées conformément aux instructions.

58-F-1

DFQW5829ZA_UT-MB_8_OI_M.indb 6 2013/11/11 11:15:57

Read Me First

For Canada / Pour le Canada

Canadian ICES-003

CAN ICES-003(B) / NMB-003(B)

7-M-3

Industry Canada

This product complies with RSS210 Industry Canada.

Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2) this device must accept any interference, including in-

terference that may cause undesired operation of the

device.

<Ne s’applique qu’aux modèles avec technologie Blue-

tooth/LAN sans l>

Industrie Canada

Cet équipement est conforme à la norme CNR-210

d’Industrie Canada. Son fonctionnement est soumis aux

deux conditions suivantes :

(1) ce dispositif ne peut produire de brouillage, et

(2) ce dispositif doit accepter le brouillage, y compris le

brouillage pouvant entraîner le fonctionnement non

désiré de l’appareil.

30-Ca-1-1

This product (local network devices) for the band 5150-

5250

MHz

is only indoor usage to reduce potential for

harmful interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users (mean-

ing they have priority) of 5250-5350

MHz

and 5650-

5850

MHz

and these radars could cause interference

and/or damage to LELAN devices.

<Ne s’applique qu’aux modèles avec technologie LAN

sans l>

Cet appareil (pour réseaux locaux radioélectriques) dans

les bandes de fréquences 5150-5250

MHz

est réservé à

une utilization à l’intérieur an de réduire le risque d’inter-

férence avec les systèmes satellites mobiles bicanaux.

Les radars forte puissance sont désignés comme étant

les premiers utilisateurs (c’est-à-dire qu’ils ont la priorité)

des bandes de fréquences 5250-5350

MHz

et 5650-

5850

MHz

. Ces stations radars peuvent provoquer des

interférences et/ou des dommages à ce périphérique.

30-Ca-2-1

This computer complies with Industry Canada radia-

tion exposure limits set forth for an uncontrolled envi-

ronment.

This PC with WLAN and/or Bluetooth transmitters in-

stalled, has been approved for portable operation and

does not require any minimum spacing be provided

between antennas and all person’s body.

<Ne s’applique qu’aux modèles avec technologie Blue-

tooth/LAN sans l>

Cet équipement est conforme aux limites d’exposition

aux rayonnements d’Industrie Canada établies pour

un environnement non contrôlé.

Ce PC avec émetteurs WLAN et/ou Bluetooth a été

approuvé à des ns d’opération mobile; aucun espace

minimum entre les antennes et le corps de l’utilisateur

n’est requis.

FOR USE WITH MODEL NO. : CF-AA5713A

POUR UTILISER AVEC MODÈLE : CF-AA5713A

20-Ca-1

For India

For the purpose of recycling to facilitate effective utilization of resources, please return this product to a

nearby authorized collection center, registered dismantler or recycler, or Panasonic service center when dis-

posing of this product.

Please see the Panasonic website for further information on collection centers, etc.

http://www.panasonic.co.in/wps/portal/home

68-M-1

USA Only: Disposal may be regulated in your community

due to environmental considerations. For disposal or re-

cycling information, please visit Panasonic website: http://

www.panasonic.com/environmental or call 1-888-769-0149

65-M-2

This product contains a CR Coin Cell Lithium Battery which

contains Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate/

38-M-1

A lithium ion battery that is recy-

clable powers the product you

have purchased.

Please call 1-800-8-BATTERY for

information on how to recycle this

battery.

L’appareil que vous vous êtes pro-

curé est alimenté par une batterie

au lithium-ion.

Pour des renseignements sur le

recyclage de la batterie, veuillez

composer le

1-800-8-BATTERY.

48-M-1

DFQW5829ZA_UT-MB_8_OI_M.indb 7 2013/11/11 11:15:57

Getting Started

Thank you for purchasing this Panasonic product. For optimum performance and safety, please read these instructions

carefully.



Terms and illustrations in these instructions

CAUTION

: Conditions that may result in minor or moderate injury.

NOTE

: Useful and helpful information.

: Page in these Operating Instructions or in the Reference Manual.

: Reference to the on-screen manuals.

Display “Charm” Flick from right side to inside of the screen.

Touch

: Touch (Settings) in the Charm menu.

Some illustrations are simplied to help your understanding and may look different from the actual unit.

If you do not log on as an administrator, you cannot use some functions or cannot display some screens.

Refer for the latest information about optional products to the catalogs, etc.

In these instructions, the names and terms are referred as follows.



“Windows

8.1 Pro 64-bit” as “Windows” or “Windows 8.1”



DVD MULTI drive as “DVD drive”

Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are different from the actual

screen messages. For example, [Flight mode] may be displayed instead of [Airplane mode] in some language pref-

erence)



Disclaimer

Computer specications and manuals are subject to change without notice. Panasonic Corporation assumes no li-

ability for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the

manuals.



Trademarks

Microsoft

, Windows

, and the Windows logo are registered trademarks of Microsoft Corporation of the United States

and/or other countries.

Intel, Core, Centrino and PROSet are either registered trademarks or trademarks of Intel Corporation.

SDXC Logo is a trademark of SD-3C, LLC.

Bluetooth

is a registered trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Panasonic Corporation.

NVIDIA, the NVIDIA logo and GeForce are trademarks and/or registered trademarks of NVIDIA Corporation in the U.S.

and/or other countries.

Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective

own companies.



On-screen Manual

For further information about the computer, you can refer to the on-screen manual.

Reference Manual

The Reference Manual contains the practical information to help you fully enjoy the computer’s performance.

Important Battery Tips

The Important Battery Tips will provide you with the battery information so that you can use the built-in battery in the

optimum condition to obtain longer operation time.

To access the on-screen manuals, follow the steps below.

On the Start screen, touch the [Manual Selector] tile, and select the on-screen manual.

Introduction

DFQW5829ZA_UT-MB_8_OI_M.indb 8 2013/11/11 11:15:57

Getting Started

Description of Parts

Camera

Reference Manual “Camera”

A: Camera Indicator

B: Camera Lens

C: Ambient Light Sensor

The ambient light sensor is equipped with an auto-

matic brightness adjustment function that adjusts

the display screen.

(

page 16)

D: Wireless LAN Antenna / Bluetooth Antenna

Reference Manual “Wireless LAN” “Bluetooth”

E: Wireless LAN Antenna

Reference Manual “Wireless LAN”

F: Windows Button

Reference Manual “Hardware Buttons”

G: Power Switch

H: Hardware Buttons

Reference Manual “Hardware Buttons”

I: Headphone Jack

A headphone can be connected.

J: SD Memory Card Slot

Reference Manual “SD Memory Card”

K: USB3.0 Port

Reference Manual “USB Devices”

L: DC-IN jack

Front side Right side

㪙

㪘㪚

㪝

㪛

㪜

㪞

㪠

㪡

㪢

㪣

㪟

DFQW5829ZA_UT-MB_8_OI_M.indb 9 2013/11/13 13:23:24

Getting Started

Description of Parts

A: Ventilation Hole (Exhaust)

B: Reset Button (For servicing by Panasonic)

C: Smart Card Slot

Reference Manual “Smart Card”

D: Microphone

E: Speaker

F: Ventilation Hole (Intake)

G: Expansion Bus Connector

Reference Manual “Cradle”

H: LED Indicator

: Power Indicator

Off: Power off/Hibernation, Green: Power on,

Blinking green: Sleep

: Drive status

: SD Memory Card status

(Blinking: During access or a password is re-

quested)

Reference Manual “SD Memory Card”

: Battery status

page 15 “When the battery indicator does

not light on”

Reference Manual “Battery Power”

I: Security Hook

Pull out the security hook when passing through a

security cable. Store the security hook during normal

use.

(The insulation coating has been applied to the metal

part.)

For further information, read the manual that comes

with the cable.

Rear side Left side

㪘

㪝㪞

㪜

㪙

㪚

㪛

㪟

㪠

This computer contains a

magnet and magnetic products

at the locations circled

in the illustration at right.

Avoid leaving metallic object

or magnetic media in contact

with these areas.

DFQW5829ZA_UT-MB_8_OI_M.indb 10 2013/11/11 11:15:58

Getting Started



Preparation

Check and identify the supplied accessories.

If you do not nd the described accessories, contact Panasonic Technical Support.

•ACAdaptor .. 1

Model No: CF-AA5713A

•ACCord .... 1

•SoftCloth ... 1

Reference Manual “Screen Input Operation”

•OPERATINGINSTRUCTIONS(Thisbook) ................... 1

Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s packaging

(

page 26).

1 Connect your computer to a power outlet.

The battery charging starts automatically.

CAUTION

Do not disconnect the AC adaptor until the rst-time operation procedure is

completed.

When using the computer for the rst time, do not connect any peripheral

device except AC adaptor.

Handling the AC adaptor



Problems such as sudden voltage drops may arise during periods of

thunder and lightning. Since this could adversely affect your computer,

an uninterruptible power source (UPS) is highly recommended unless

running from the built-in battery alone.

2 Turn on the computer.

Press and hold the power switch (

page 9) until the power indica-

tor

(

page 10) lights.

CAUTION

Do not press the power switch repeatedly or do not hold the power switch

for four seconds or longer.

First-time Operation

DFQW5829ZA_UT-MB_8_OI_M.indb 11 2013/11/13 13:23:25

Getting Started

First-time Operation

3 Select language.

Select language and click [Next].

Follow the on-screen instructions.

4 Setup Windows.

Follow the on-screen instructions.

The computer restarts several times. Wait until the drive indicator

has turned off.

After the computer is turned on, the screen remains black or unchanged

for a while, but this is not a malfunction. Wait for a moment until the

Windows setup screen appears.

Setup of Windows will take approximately 5 minutes.



Go to the next step, conrming each message on the display.

If “Get online” is displayed, select “Skip this step”. You can set the Wire-

less Network after the setup of Windows is complete.

CAUTION

You can change the user name, password, image and security setting after

setup of Windows.

Remember your password. If you forget the password, you cannot use

Windows. Creating a password reset disk beforehand is recommended.

Do not use the following words for user name: CON, PRN, AUX, CLOCK$,

NUL, COM1 to COM9, LPT1 to LPT9, @, &, space. In particular, if you cre-

ate a user name (account name) that includes the “@” mark, a password

will be requested at the log-on screen, even if no password has been set.

If you try to log on without entering a password, “The user name or pass-

word is incorrect.” may be displayed and you will not be able to sign in (

page 24).

5 Set the time zone, and then set the date and time.

Flick from the middle of the Start screen to the top, and then touch

[Control Panel] under “Windows System”.

Touch [Clock, Language, and Region] - [Date and Time].

Touch [Change time zone…].

Select the time zone, then touch [OK].

Touch [Change date and time…], then set the date and time.

6 Create the recovery disc.

A recovery disc allows you to install OS and restore its factory default

condition, in case, for example, the recovery partition of the ash memory

is damaged. We recommend creating a recovery disc before you begin

using the computer.

Refer to

Reference Manual “Recovery Disc Creation Utility” about

creating the disc.

NOTE

PC Information Viewer

This computer periodically records the management information of the ash memory, etc. The maximum data vol-

ume for each record is 1024 bytes.

This information is only used for estimating the cause when the ash memory goes down by any possibility. They

are never sent to outside via network nor used for any other purpose except for the purpose described the above.

To disable the function, add the check mark for [Disable the automatic save function for management information

history] in [Hard Disk Status] of PC Information Viewer, and touch [OK].

(

Reference Manual “Checking the Computer’s Usage Status”)

In the default settings, a shortcut icon for Korean language is on the Desktop screen. You may delete the icon if not necessary.

Note that the computer consumes electricity even when the computer power is off. If the built-in battery is fully

charged, the battery will fully discharge in the following period of time:

Status Discharge period

When power is off Approx. 4 weeks

In sleep Approx. 3 days

In hibernation Approx. 4 weeks

DFQW5829ZA_UT-MB_8_OI_M.indb 12 2013/11/13 13:23:25

Getting Started



Before using wireless function

Display “Charm” and touch

- [Change PC Settings] - [Network] - [Airplane mode

Set [Airplane mode

] to [Off], and then;

set [Wi-Fi] to [On] (for wireless LAN).

set [Bluetooth] to [On] (for Bluetooth).

: Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are different from the

actual screen messages. For example, [Flight mode] may be displayed instead of [Airplane mode] in some

language preference.)



To change the partition structure

You can shrink a part of an existing partition to create unallocated disk space, from which you can create a new parti-

tion. In the default setting, you can use a single partition.

Proceed as follows on the Start screen.

1. Flick from the middle of the screen to the top, and then long touch [This PC] under “Windows System”.

2. Touch [Manage] on app bar.

Touch [Disk Management].

Long touch the partition for Windows (“c” drive in the default setting), and touch [Shrink Volume].

The partition size depends on the computer specications.

Input the size in [Enter the amount of space to shrink in MB] and touch [Shrink].

You cannot input a larger number than the displayed size.

To select [Reinstall to the OS related partitions.] in installing OS (

page 21), 70

or more is necessary

for [Total size after shrink in MB].

Long touch [Unallocated] (the shrunk space in the step

) and touch [New Simple Volume].

Follow the on-screen instructions to make the settings, and touch [Finish].

Wait until formatting is completed.

NOTE

You can create an additional partition using remaining unallocated space or newly creating unallocated space.

To delete a partition, long touch the partition and touch [Delete Volume] in the step



To select language

To select a language other than the one you have selected during the rst-time operation, follow the steps below.

Flick from the middle of the Start screen to the top, and then touch [Control Panel] under “Windows System”.

Touch [Clock, Language, and Region] - [Language] - [Add a language].

Select a language, and then touch [Add].

Depending on the region, two or more languages are selectable. Touch [Open] and select the desired language,

and then touch [Add].

Touch [Option] for the language you want to use.

Touch [Make this the primary language].

Touch [Log off now].

DFQW5829ZA_UT-MB_8_OI_M.indb 13 2013/11/13 13:23:25

Getting Started

Turning On / Turning Off

Turning On

Press and hold the power switch (

page 9) until the power indicator (

page 10) lights.

NOTE

Do not press the power switch repeatedly.

The computer will forcibly be turned off if you press and hold the power switch for four seconds or longer.

Once you turn off the computer, wait for ten seconds or more before you turn on the computer again.

Do not perform the following operation until the drive indicator

turns off.



Connecting or disconnecting the AC adaptor



Pressing the power switch



Touching the screen or external mouse/keyboard

Turning Off

Shut down the computer.

1. Display “Charm” and touch

2. Touch [Power] - [Shut down].

NOTE

To turn off the computer completely, proceed as follows.

Display “Charm” and touch

- [Change PC settings] - [Update and recovery] - [Recovery].

Touch [Restart now] under “Advanced startup”.

Touch [Turn off your PC].

Precaution against Starting Up/Shutting Down

Do not do the following



Connecting or disconnecting the AC adaptor



Pressing the power switch



Touching the screen or external mouse/keyboard

NOTE

To conserve power, the following power saving methods are set at the time of purchase.



The screen automatically turns off after:

10 minutes (when AC adaptor is connected) of inactivity

5 minutes (when operating on battery power) of inactivity



The computer automatically enters sleep

after:

20 minutes (when AC adaptor is connected) of inactivity

15 minutes (when operating on battery power) of inactivity

Refer to Reference Manual “Sleep or Hibernation Functions” about resuming from sleep.

DFQW5829ZA_UT-MB_8_OI_M.indb 14 2013/11/11 11:15:58

Useful Information

Operation environment

Place the computer on a at stable surface not subject to shock, vibration, and danger of dropping. Do not place

the computer upright or turn it over. If the computer is exposed to an extremely strong impact, it may become dam-

aged.

Operating environment

Temperature: Operation : 5

°C

to 35

°C

{41

°F

to 95

°F

}

Storage : -20

°C

to 60

°C

{-4

°F

to 140

°F

}

Humidity: Operation : 30

to 80

RH (No condensation)

Storage : 30

to 90

RH (No condensation)



Even within the above temperature/humidity ranges, operation for a long time in extreme environments, smoking

nearby, or operation in places where oil is used or where there is a lot of dust will result in the product deterioration

and will shorten the product life.

Do not place the computer in the following areas, otherwise the computer may be damaged.



Near electronic equipment. Image distortion or noise may occur.



In extremely high or low temperature.

As the computer can become hot during operation, keep it away from items that are sensitive to heat.

Handling cautions

This computer is designed to minimize shock to parts such as the LCD and the ash memory drive, but no warranty is

provided against any trouble caused by shock. Be extremely careful when handling the computer.

When carrying the computer:



Turn off the computer.



Remove all external devices, cables, Smart Cards and other protruding objects.



Do not drop or hit the computer against solid objects.



Do not grip the display part.

When you board an airplane, take the computer with you and never put it in your checked luggage. When using the

computer on airplane, follow the airline’s instructions.



To use airplane mode

1. Display “Charm” and touch

- [Change PC Settings] - [Network] - [Airplane mode

2. Set [Airplane mode

] to [On].

3. Conrm that all wireless devices are set to [Off].

: Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are different from the

actual screen messages. For example, [Flight mode] may be displayed instead of [Airplane mode] in some

language preference.)

Avoid any harmful substances such as oil from getting into the touchscreen. The pointer may not work correctly.

Be careful not to get injured by dropping or getting hit when carrying the computer.



When the battery indicator does not light on

The battery indicator may not light on even if the AC adaptor is correctly connected to the computer, due to the follow-

ing reasons.

The AC adaptor’s protection function may be working. In this case, pull out the AC cord and wait for more than

1 minute before reconnecting the AC cord.



When using peripheral devices

Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction

manuals of the peripheral devices.

Use the peripheral devices conforming to the computer’s specications.

Connect to the connectors in the correct direction.

If it is hard to insert, do not try forcibly but check the connector’s shape, direction, alignment of pins, etc.

If screws are included, fasten them securely.

Remove the cables when you carry the computer. Do not pull the cables forcibly.



Preventing your computer from unauthorized use via wireless LAN/Bluetooth

Before using wireless LAN/Bluetooth, make the appropriate security settings such as data encryption.

Handling and Maintenance

DFQW5829ZA_UT-MB_8_OI_M.indb 15 2013/11/11 11:15:58

Useful Information

Handling and Maintenance



Battery Recalibration

The battery recalibration may take a long time due to the large battery capacity. This is not a malfunction.





Full charge: Approximately 2 hours



Complete discharge: Approximately 1 hour



When performing “Battery Recalibration” without shutting down Windows, it may take more time to charge / discharge.



Sensors

This computer is equipped with four sensors (acceleration sensor, gyro sensor, magnetic sensor, ambient light sensor),

and you can use these sensors with any software that is compatible.

As the accuracy of each sensor output is dependent on the operating environment and other conditions, the results

should only be used as a reference.

The acceleration sensor, gyro sensor, and magnetic sensor are located at the bottom left of the LCD. The detection results of

each sensor may vary depending on how you are holding the computer, the application software you are using, and other factors.

Automatic brightness adjustment

The computer is equipped with an automatic brightness adjustment function that adjusts the display screen based

on the ambient light sensor. You can congure the automatic adjustment function as follows.



Display “Charm” and touch

- [Change PC Settings] - [PC and devices] - [Power and sleep], then set [Adjust

my screen brightness automatically] to [On].

The ambient light sensor is located at the top of LCD.

The ambient light cannot be detected properly if this area is obstructed or dirty.

Magnetic sensor

The magnetic sensor on the computer operates by detecting geomagnetism. Therefore, the magnetic sensor may

not function properly and it readings may be inaccurate, especially in the following environments.



Inside or near steel structures such as buildings or bridges



Inside or near automobiles, or near train power lines



Near metallic furniture or appliances



When the AC adaptor or other peripheral devices are brought closer to the computer



Near magnets, speakers, or other objects with strong magnetic elds

The magnetic directions indicated by the magnetic sensor may not be accurate immediately after purchase or in

environments with poor magnetic elds.

In such cases, turn on the computer and move it as follows.

Hold the computer so that its screen side is facing upward and level.

While keeping the computer level, rotate it 90 degrees or more clockwise.

Return the computer to position

, and rotate it 90 degrees or more counterclockwise.

Return the computer to position

Tilt the computer 90 degrees or more to the left so that the left side of the computer tilts down.

Return the computer to position

, and tilt it 90 degrees or more to the right so that the right side of the computer tilts down.

CAUTION

● Hold the computer rmly when moving it. Strong shocks from dropping the computer may result in damage.

Maintenance

If drops of water or other stains get on the surface of the LCD panel, wipe them off immediately. Failure to do so may result in staining.

To clean the LCD panel

Use the soft cloth included with the computer. (For further information, refer to “Suggestions About Cleaning the LCD

Surface”

Reference Manual “Screen Input Operation”.)

To clean areas other than the LCD panel

Wipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in water-diluted detergent and wring it thoroughly.

CAUTION

Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc.

Do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface.

Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause

malfunction or damage.

DFQW5829ZA_UT-MB_8_OI_M.indb 16 2013/11/11 11:15:58

Useful Information

Dispose of Computer

Attention Customers

Don't remove the battery by yourself. The battery must be removed by qualied professionals.

When disposing of this product, be sure to contact qualied professionals to remove the battery.

Attention Qualied professionals to remove the battery

Dispose of this product correctly in accordance with the local regulations after removing the battery as shown in the

following procedure.



Preparation

Remove all peripherals (SD memory card, etc.).

Erase the stored data. (

Reference Manual “Erasing Flash Memory Data”)

CAUTION

Never disassemble the computer except before disposal.

Refer to “Safety Precautions and Regulatory Information” for precautions when disposing of the computer.

1. Turn off the computer completely. (

page 14)

Do not use sleep/hibernation.

2. While connecting the AC adaptor, press both volume buttons (

and ) at the same time for more than

ten seconds.

The built-in battery’s power output stops.

Disconnect the AC adaptor, and press the power button for 1 second or longer and conrm the computer does

not start up.

3. Turn over the computer, and remove the screws (10).

4. Unhook the claws on the upper part of the cover (

), and open the cover

from the right side (

The left side of the cover is connected to the computer with the cord. Do

not pull the cord.

DFQW5829ZA_UT-MB_8_OI_M.indb 17 2013/11/11 11:15:58

Useful Information

Handling and Maintenance

5. Remove the screws (4) that secures the built-in battery (A), and move the

built-in battery (A) as shown in the illustration.

6. Disconnect the connector, and remove the built-in battery.

Insulate the connectors on the built-in battery by covering them with plastic

tape, for example.

DFQW5829ZA_UT-MB_8_OI_M.indb 18 2013/11/11 11:15:58

Useful Information

Installing software will return the computer to the default condition. When you install the software, the ash memory

data will be erased.

Back up important data to other media or an external hard disk before installation.

CAUTION

Do not delete the Recovery Partition on the ash memory. The Recovery Partition is not available to store data.



To check the Recovery Partition, perform the following methods.



Flick from the middle of the Start screen to the top, and then long touch [This PC] under “Windows System”.



Touch [Manage] on app bar.



Touch [Disk Management].

NOTE

You can use the following buttons instead of the keyboard.

: ↓ key

: ↑ key

: Enter key

: F2 key (Default setting)

Connect the AC adaptor and do not remove it until installation is complete.



Remove everything and reinstall Windows

You can reinstall the OS that was pre-installed at the time of purchase (Windows 8.1).

Preparation

<Only for model with TPM> Connect the external keyboard.

Remove all peripherals.

1 Perform “Remove everything and reinstall Windows”.

Display “Charm” and touch

- [Change PC settings] - [Update and recovery] - [Recovery].

Touch [Get Started] under “Remove everything and reinstall Windows”.

Touch [Next].

Select the option.

• Just remove my les

Perform the reinstallation of the Windows in a few moments (Approximately 20 minutes).

• Fully clean the drive

By fully cleaning, the deleted les can not be recovered easily and the security level will be increased. The

processing time will be longer (Approximately 140 minutes).

Follow the on-screen instructions.

After the reinstallation, the computer will restart.

Do not interrupt installation, for example by turning off the computer or performing other operation.



Otherwise installation may become unavailable as Windows may not start up or the data may be corrupted.

2 Perform the “First-time Operation” (

page 12).

NOTE

The date and time, and the time zone may not be correct. Be sure to set them correctly.

3 Perform Windows Update.

4 <Only for model with TPM> Clear TPM.

Flick from the middle of the Start screen to the top.

Touch [Run] under “Windows System”, input [tpm.msc] and touch [OK].

Touch [Clear TPM ...] under “Actions” on the right of the “TPM Manager on Local Computer” screen.

Touch [Restart] of the “Manage the TPM security hardware” screen.

The computer will restart.

When “TPM conguration change was requested to ...” is displayed, press

F12

Touch the Desktop tile, and when “TPM is ready” appears, touch [Close].

Installing Software

DFQW5829ZA_UT-MB_8_OI_M.indb 19 2013/11/11 11:15:58

Useful Information

Installing Software



Flash memory Recovery

If the problem persists after performing “Remove everything and reinstall Windows”, follow the instructions below.

Preparation

<Only for model with TPM> Connect the external keyboard.

Remove all peripherals.

1 Start the Setup Utility.

Display “Charm” and touch - [Change PC settings] - [Update and recovery] - [Recovery].

Touch [Restart now] under “Advanced startup”.

Touch [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart].

If the password is requested, enter the Supervisor Password.

2 Write down all of the contents of the Setup Utility and touch [Exit] and double-touch

[Load Default Values]

At the conrmation message, touch [Yes].

3 Check the [UEFI Boot] setting of the Setup Utility.

When installing Windows 8.1: [Enabled]

4 Touch [Exit] and double-touch [Save Values and Reboot].

At the conrmation message, touch [Yes].

The computer will restart.

5 Press (Rotation lock) button while [Panasonic] boot screen is displayed.

The Setup Utility starts up.

If the password is requested, enter the Supervisor Password.

Touch [Exit] and double-touch [Recovery Partition].

7 Touch [Next].

8 Touch [YES].

9 At the License Agreement screen, touch [Yes, I agree to the provisions above and wish

to continue!] and touch [Next].

10 Touch [Next].

If the option is displayed, select the setting and touch [Next].

[Reinstall Windows to the whole Disk to factory default.]

Select this option when you want to install Windows to the factory default. After installation, you can create a

new partition. For how to create a new partition, refer to “To change the partition structure” (

page 13).

11 At the conrmation message, touch [YES].

Installation starts according to the instructions on the screen. (It will take approximately 20 minutes.)

Do not interrupt installation, for example by turning off the computer or other operation.



Otherwise installation may become unavailable as Windows may not start up or the data may be corrupted.

12 When Ending process screen is displayed, touch [OK] to turn off the computer.

13 Turn on the computer.

If the password is requested, enter the Supervisor Password.

14 Perform the “First-time Operation” (

page 12).

NOTE

The date and time, and the time zone may not be correct. Be sure to set them correctly.

15 Start the Setup Utility and change the settings as necessary.

16 Perform Windows Update.

17 <Only for model with TPM> Clear TPM (

page 19).

DFQW5829ZA_UT-MB_8_OI_M.indb 20 2013/11/11 11:15:58

La page est en cours de chargement...

Panasonic UT-MB5 Mode d'emploi

Marque: Panasonic

Modèle: UT-MB5

Catégorie: Des cahiers

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

italiano: Panasonic UT-MB5 Guida utente
English: Panasonic UT-MB5 User guide

Panasonic UT-MB5 Mode d'emploi

Panasonic UT-MB5 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents