VAVA VA-SP008 Manuel utilisateur

Marque: VAVA

Modèle: VA-SP008

Catégorie: Projecteurs de données

Taper: Manuel utilisateur

1. The projector is connected to the internet: Click " " select and connect to the same network as

the projector;

2. Click " " and select "VA-SP008-XXXXXX" to ﬁnish.

Contents

Projector Introduction

1.1 Packaging Overview

1.2 Projector Introduction

1.3 Instruction of Remote Controller

Use the Projector

2.1 Turn on/off projector

2.2 Focus adjustment

2.3 Bluetooth remote control pairing

2.4 Connect to the Wi-Fi network

2.5 Home interface

2.6 Instruction of the top navigation bar

2.7 Mirror function

2.8-3.4 Other functions

FCC STATEMENT

WEEE Compliance / Warranty

Product Speciﬁcations

01-03

04-18

04-05

10-13

14-18

19-20

Please read the instruction carefully before operating the unit, the pictures are for reference only

1.1 Packaging Overview 1.2 Projector Introduction

Model : VA-SP008

Portable Smart Projector 480P

User Manual Front View of the projector

Left View of the projector

Right View of the projector

Back View of the projector Bottom View of the projector

Top View of the projector

-01- -02-

Projector Introduction Projector Introduction

Projector Adaptor User Manual Remote Controller

Lens of the projector

Focusing Camera

Long-press for auto-focus

Heat

Dissipation vents

IR receiving

HDMI Port Type-C (Charge)

USB Port ON/OFF

Standard

Screw Hole

Reset

Burn

(Recovery)

1.3 Instruction of Remote Controller 2.1 Turn on/off the projector

-03- -04-

Projector Introduction

Bluetooth pairing mode

Hold both "OK" and "Volume -"

button ﬁve seconds to start

remote control pairing mode

Mouse mode

Start: click mouse button

Close: click navigation button

Indicator light status

Slow ﬂash: unpaired mode

Indicator light

Power

Button

Direction

navigation key

Menu key

OK key (Conﬁrm key) When

entering characters, the

keyboard can be called up

Home key Return key

Mouse

Volume - Volume +

Focusing

(Left and right direction

keys to adjust focus)

Turn on

Press and hold the right on/off button for 3 seconds to turn on

the device.

Turn off

Press and hold the power button for 1 second to turn off the

device (Figure 1), or press and hold the power button on the

remote control to power off.

2.2 Focus adjustment

2.2.1 Manual focus

(1) Press and hold the " " button of the projector for about 1

second to bring up the focus circle, and then press and hold

the projector's "left/right" direction arrow to focus manually;

(2) Press and hold the" "button of the remote control for 1

second. After the focusing circle appears, press and hold the

"Left/Right" direction key of the remote control to focus

manually.

Use the Projector

-05- -06-

Pairing method:

1.When the Bluetooth interface appears for the ﬁrst time as the device is turned on, press the "OK + Volume -"

button of the remote controller for about 5 seconds, the remote controller indicator ﬂashes quickly, and the

remote controller enters automatic pairing mode.

2.Enter the "Settings-Bluetooth" interface through the "Direction/Conﬁrm" button on the body, press the "OK +

Volume -"button of the remote controller for about 5 seconds. the remote control indicator ﬂashes quickly. and

then click "Scan to ﬁnd Device", the remote controller enters automatic pairing mode.

2.2.2 Auto focus method

(1) The distance between the projector and the wall is about 0.5-1.5M, short press the " " button of the projector,

the focus circle will pop up and auto focus will be performed, and the focus circle disappears after focusing;

(2) Tilt the projector back and forth about 45 degrees, the focusing ring will pop up,

and auto focus will be activated and complete itself.

(3) Short press the " " button of the remote control, the focus ring will pop up, and the auto focus will be

activated and complete itself.

2.3 Bluetooth remote control pairing

Use the Projector Use the Projector

-07- -08-

2.4 Connect to the Wi-Fi network

Use the Projector

Enter the system, Settings - -> NETWORK--> select network and enter the password.

2.5 Home Interface

Use the Projector

Use the Projector Use the Projector

SEARCH HOME APPS VIDEO MUSIC SETTING WEATHER HDMI WIFI

OPTION

-09- -10-

2.6 Instruction of the top navigation bar 2.7 Mirror Function

According to the devices of the mirror function, open the

corresponding applications (Apple Screen Mirror / Android Mirror

Apple wired Mirror), or you can open the relevant applications

in "Settings-Mirror" interface to start Screen Mirror function.

2.7.1 Apple Mirror function

iPhone device connection

(1) Connect the device to the network;

(2) Enter iPhone connection operation, there are two methods for

iPhone

΍ Under Wi-Fi environment: Open the "Settings" of the mobile phone ---

"Wireless LAN"

Connect the mobile phone to the same network as the projector;

ΎWithout Wi-Fi environment: Open the "Settings" of the mobile phone

---"Personal Hot spot"

Turn on the hot spot and connect the projector to the hot spot;

(3) Go back to the main interface of the phone, slide up to open the

control panel, and click Airplay;

(4) Select "VA-SP008-XXXXX", open "Mirror", complete

-11- -12-

2.7.2 Mac device connection 2.7.3 Android screen mirror function

1. Open the "Android Projection Screen" application on the projector;

2. Connect the Android phone and the projector under the same Wi-Fi:

3. In the mobile phone "Settings" "NETWORK" "Wireless Screen

projection", turn on the wireless projection function, and search for the

device "VA-SP008-XXXXXX" (random number), select connection;

4. Most Androids can be found in the "Shortcut Bar > Screen Sharing / Screen

mirroring/projection screen/WLAN/wireless display/multi-screen

interaction" Search the device under the menu and connect.

Please read the instruction carefully before operating the unit, the pictures are for reference only

Model: VA-SP008

Portable Smart Projector 480P

User Manual

MADE IN CHINA

Manufacturer: Shenzhen Aspiron Technology Company Limited

Address: 3rd Floor, Yiben Building, No.1063 Chaguang Road, Xili Street,

Nanshan District, Shenzhen,Guangdong,China

iOS devices Projector

-13- -14-

2.7.4 Wired screen mirror function(iOS)

1. Please connect iPhone and projector as picture shows.

2. Please select "Trust" in the pop-up question of the phone.

Tips: The ﬁrst connection takes about 45 seconds, please be patient!

2.8 Description of external equipment

How to connect a USB ﬂash drive

1. Insert the U disk into the USB port, open

the "File Management" application, and

the device can be identiﬁed.

2. You can also go to "MY APPS" ---> File

Manager to check.

-15- -16-

2.9 Software upgrade

Local upgrade

Copy the downloaded ﬁrmware update.zip ﬁle to the root directory of the USB

ﬂash drive, and insert the USB ﬂash drive (in FAT32 format); the system can

automatically recognize the upgrade package and follow the prompts to

upgrade (make sure the battery is sufﬁcient when upgrading).

Online upgrade

In the "SETTING Update-Online Upgrade" interface, search for the new version

upgrade.

3.0 Adjust Brightness

There are three brightness modes of "Energy Saving/Normal/Highlight" for selection

under the interface of Settings-Image-Brightness Mode.

3.1 How to connect HDMI

After inserting he HDMI device into the HDMI interface, open the HDMI switch icon and click to

conﬁrm; or after connecting the HDMI device, enter the "SETTING-INPUT SOURCE - HDMI

Connection" interface and conﬁrm to open.

3.4 Introduction of other functions

3.4.1 Screen display abnormal situation handling method

(1) When the screen shows the trapezoid, you can perform horizontal calibration under the "SETTING-IMAGE

SETTING-Keystone Correction" interface; or turn off the "Automatic Keystone Correction" to perform custom

corrections, which can solve the problem of image errors.

(2) When the auto focus of the screen is not clear, place the machine horizontally about 1-2 meters away from

the wall, and in the "Auto Focus" interface, select "Al Mode" for "Al Auto Focus Machine Learning". lt can solve

the problem of unclear auto focus of the machine.

3.4.2 How to connect Bluetooth speakers

(1) Enter settings---Bluetooth.

(2) Turn on the Bluetooth speaker and enable the Bluetooth pairing mode (for pairing mode, please check

the Bluetooth speaker manual).

(3) Click "Scan for device" on the interface of the micro projector.

(4) Then the available Bluetooth speaker name will be displayed in the available devices

(5) Click Connect to display the Bluetooth speaker shows "Connected" on the projector to complete.

-17- -18-

3.2 System Settings

3.3 How to charge

Reset the system in "SETTING Update-Restore Factory".

System reset will clear the local data and local ﬁles in your

device and restore it to the state when the device was

shipped. Please use this function with caution.

Connect the power adapter to the Type-C charging port.

The power indicator light is steady red, which means it is

charging.

The blue power indicator light is on, indicating that the

charging is complete.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation.

(3) Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in particular installation.

lf this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

5IJTFRVJQNFOUDBOCFVTFEPOMZJONPCJMFFYQPTVSFDPOEJUJPOT

'PS$BOBEB0QFSBUJPOPGUIJTEFWJDFJTSFTUSJDUFEUPJOEPPSVTFPOMZ.)[

1PVSMF$BOBEB-FGPODUJPOOFNFOUEFDFUBQQBSFJMFTUMJNJUÏËVOFVUJMJTBUJPOFOJOUÏSJFVSVOJRVFNFOU.)[

For USA: The frequency stability of all transmission frequencies of U-NII-1, U-NII 2A, U-NII 2C and U-NII-3 meets

the requirements of 47 CFR FCC Part15.407(g), and the manufacturer declares that their transmission is

maintained at Band U-NII-1, U-NII 2A, U-NII 2C and U-NII-3.

For Canada: The frequency stability of all transmission frequencies of U-NII-1, U-NII 2A, U-NII 2C and U-NII-3 meets

the 47 CFR FCC Part15.407(g) requirements, and the manufacturer states that their transmissions remain within the

U-NII-1, U-NII 2A, U-NII 2C and U-NII-3 bands.

Pour le Canada : La stabilité de fréquence de toutes les fréquences de transmission de U-NII-1, U-NII 2A, U-NII 2C

et U-NII-3 est conforme aux exigences 47 CFR FCC Part15.407(g), et le fabricant déclare que leurs transmissions

restent dans les bandes U-NII-1, U-NII 2A, U-NII 2C et U-NII-3.

Warning

The device has been evaluated to meet general RF exposure requirements

RF Exposure Information:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

FCC STATEMENT

-19-

-20-

Wireless Screen projection

Md l VASP008

3FTQPOTJCMF1BSUZ VAVA International Inc.

Address: 370 Lexington Ave, Suite 803 New York, NY 10017

Tel: 1-888-456-8468

Email: [email protected]

VAVA VA-SP008 Manuel utilisateur

Marque: VAVA

Modèle: VA-SP008

Catégorie: Projecteurs de données

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: VAVA VA-SP008 User manual

VAVA VA-SP008 Manuel utilisateur

VAVA VA-SP008 Manuel utilisateur

dans d''autres langues

Autres documents