Sony CDP-CX355 Le manuel du propriétaire

4-238-111-25(1)

 2002 Sony Corporation

CDP-CX355

Compact Disc

Player

GB

FR

Operating Instructions

Mode d’emploi

2

GB

Welcome!

Thank you for purchasing the Sony

Compact Disc Player. Before operating

the unit, please read this manual

thoroughly and retain it for future

reference.

About This Manual

The instructions in this manual is for

model CDP-CX355.

Conventions

• Instructions in this manual describe

the controls on the player.

You can also use the controls on the

remote if they have the same or similar

names as those on the player.

• The following icons are used in this

manual:

Indicates that you can do the

task using the remote.

Indicates hints and tips for

making the task easier.

For the customers in Canada

CAUTION

TO PREVENT ELECTRIC SHOCK,

DO NOT USE THIS POLARIZED AC

PLUG WITH AN EXTENSION

CORD, RECEPTACLE OR OTHER

OUTLET UNLESS THE BLADES

CAN BE FULLY INSERTED TO

PREVENT BLADE EXPOSURE.

To prevent fire, do not cover the

ventilation of the apparatus with news

papers, table-cloths, curtains, etc. And

don’t place lighted candles on the

apparatus.

To prevent fire or shock hazard, do not

place objects filled with liquids, such as

vases, on the apparatus.

This appliance is classified as a CLASS 1

LASER product.

This marking is located on the rear

exterior.

The laser component in this product

is capable of emitting radiation

exceeding the limit for Class 1.

This equipment is intended for home

entertainment purposes only. The

warranty shall be invalidated if used

in commercial environments, such as

by disc jockeys, etc., even within the

Warranty Period.

WARNING

To prevent shock hazard, do not insert

the plug cut off from the mains lead into

a socket outlet. This plug cannot be used

and should be destroyed.

WARNING

To reduce the risk of fire

or electric shock, do not

expose this apparatus to

rain or moisture.

To avoid electrical shock,

do not open the cabinet.

Refer servicing to

qualified personnel only.

Do not install the

appliance in a confined

space, such as a bookcase

or built-in cabinet.

Don’t throw away the

battery with general

house waste, dispose of

it correctly as chemical

wastes.

NOTICE FOR THE CUSTOMERS IN THE

UNITED KINGDOM

A moulded plug complying with BS1363

is fitted to this equipment for your safety

and convenience.

Should the fuse in the plug supplied

need to be replaced, a fuse of the same

rating as the supplied one and approved

by ASTA or BSI to BS1362, (i.e., marked

with mark or mark) must be used.

If the plug supplied with this equipment

has a detachable fuse cover, be sure to

attach the fuse cover after you change

the fuse. Never use the plug without the

fuse cover.

If you should lose the fuse cover, please

contact your nearest Sony service station.

3

GB

FR

TABLE OF CONTENTS

Getting Started

Unpacking............................................................................................................................ 4

Hooking Up the System..................................................................................................... 4

Connecting Another CD Player ........................................................................................ 6

Inserting CDs....................................................................................................................... 7

Basic Operations

Playing a CD...................................................................................................................... 10

Playing CDs

Using the Display ............................................................................................................ 12

Locating a Specific Disc .................................................................................................. 14

Specifying the Next Disc to Play ................................................................................... 15

Playing the Disc Which was Just Inserted – Easy Play .............................................. 15

Locating a Specific Track or a Point in a Track ............................................................ 16

Playing Repeatedly........................................................................................................... 17

Playing in Random Order (Shuffle Play) ...................................................................... 17

Creating Your Own Program (Program Play).............................................................. 18

Playing Using a Timer...................................................................................................... 20

Controlling Another CD Player (Advanced Mega Control) ...................................... 21

Fading In or Out................................................................................................................ 22

Playing Alternately (No-Delay Play/X-Fade Play) ..................................................... 23

Controlling the Player by Another unit......................................................................... 23

Storing Information About CDs (Custom Files)

What You Can Do With the Custom Files .................................................................... 24

Labeling Discs (Disc Memo)............................................................................................ 24

Storing Custom File Information Using a Keyboard................................................... 27

Storing Specific Tracks (Delete Bank) ............................................................................ 28

Grouping Discs (Group File)........................................................................................... 28

Storing Your Favorite Tracks (Hit List) ......................................................................... 30

Additional Information

Precautions ........................................................................................................................ 32

Notes on CDs..................................................................................................................... 32

Troubleshooting ................................................................................................................ 33

Specifications ..................................................................................................................... 33

Index.......................................................................................................................................... 34

Getting Started

4

GB

Getting Started

Hooking Up the System

Overview

This section describes how to hook up the CD player to

an amplifier. Be sure to turn off the power of each

component before making the connections.

Unpacking

Check that you received the following items:

• Audio cord (1)

• Remote commander (remote) (1)

• R6 (size AA) batteries (2)

Inserting batteries into the remote

You can control the player using the supplied remote.

Insert two R6 (size AA) batteries (supplied) by

matching the + and – on the batteries to the diagram

inside the battery compartment.

Insert the negative (–) end first, then push in and down

until the positive (+) end clicks into position.

When using the remote, point it at the remote sensor g

on the player.

What cords will I need?

Audio cord (1) (supplied)

White

(L)

Red

(R)

White

(L)

Red

(R)

When to replace batteries

With normal use, the batteries should last for about six

months. When the remote no longer operates the player,

replace all the batteries with new ones.

Notes

• Do not leave the remote near an extremely hot or humid

place.

• Do not drop any foreign object into the remote casing,

particularly when replacing the batteries.

• Do not expose the remote sensor to direct sunlight or

lighting apparatuses. Doing so may cause a malfunction.

• If you do not use the remote for an extended period of time,

remove the batteries to avoid possible damage from battery

leakage and corrosion.

CD player

DIGITAL OUT

(OPTICAL)

COMMAND MODE

Amplifier

To ANALOG OUT (L)

To ANALOG OUT (R)

To an AC outlet

: Signal flow

To audio input

To an AC outlet

CONTROL A1

Playing CDsGetting Started

Getting Started

5

GB

Hookups

When connecting the audio cord, be sure to match the

color-coded cord to the appropriate jacks on the

components: Red (right) to Red and White (left) to

White. Be sure to make connections firmly to avoid

hum and noise.

CD player

Amplifier

• If you have a digital component such as a digital

amplifier, D/A converter, DAT or MD

Connect the component via the DIGITAL OUT (OPTICAL)

connector using an optical cable (not supplied). Take off the

cap and plug in the optical cable.

POC-15

Optical cable (not supplied)

CD player

Digital component

Note

When you connect via the DIGITAL OUT (OPTICAL)

connector, noise may occur when you play CD software

other than music, such as a CD-ROM.

If you have a Sony component with the CONTROL

A1 jack

Connect the component via the CONTROL A1 jack.

You can simplify the operation of audio systems

composed of separate Sony components. For details, refer

to the supplementary “CONTROL A1 Control System”

instructions.

When using another Sony CD player together with

this player

You can make the supplied remote effective only for this

player.

• When using the player equipped with the

COMMAND MODE selector:

Set the COMMAND MODE selector of this player to

CD 1 and that of another player to CD 2 or CD 3. Then

set the CD 1/2/3 switch on the remote supplied for

each player accordingly.

• When using the player not equipped with the

COMMAND MODE selector:

The command mode of the player without the

COMMAND MODE selector is set to CD 1. Set the

COMMAND MODE selector of this player to CD 2,

and set the CD 1/2/3 switch on the remote to CD 2.

Connecting the AC power cord

Connect the AC power cord to a wall outlet.

Note

Install this system so that the power cord can be unplugged

from the wall socket immediately in the event of trouble.

Note on placement

Be sure to place the player on a horizontal place.

If the player is slanted, it may cause malfunction or

damage the player.

ANALOG

2ND CD

IN OUT

L

R

L

R

INPUT

CD

L

R

DIGITAL

OUT

OPTICAL

DIGITAL INPUT

OPTICAL

Getting Started

6

GB

What cords will I need?

• Audio cord (1) (Use the cord supplied with the player to be

connected.)

• Monaural (2P) mini-plug cord (1) (not supplied)

1 Connect the players with an audio cord (see also

“Hookups” on page 5).

2 Connect the players with a monaural (2P) mini-

plug cord.

Connecting Another CD Player

If you have a Sony CD player in which 5, 50, 200, or

300 discs can be inserted and which is equipped with

the CONTROL A1

(or CONTROL A1) jack and the

command mode of that player can be set to CD 3, you

can control that player as the second player with this

unit. After connecting this unit and an amplifier, follow

the procedure below.

Be sure to turn off the power of each player before

making this connection.

CDP-CX230, etc.

To an AC outlet

: Signal flow

To audio input

To ANALOG OUT

Amplifier

CDP-CX355

CDP-CX230, etc.

CDP-CX355

For details on this connection, refer to the

supplementary “CONTROL A1

Control System”

instructions.

3 Set the COMMAND MODE selector of this player

to CD 1 or CD 2, and set the command mode of the

second player to CD 3.

To an AC outlet

For details on how to operate the second player,

see “Controlling Another CD Player” on page 21

and “Playing Alternately” on page 23.

4 Connect the AC power cord of both players to AC

outlets.

Notes

• Do not connect a player other than that you intend to use as

the second player to the 2ND CD IN jacks of this player.

• When connecting a second CD player, do not connect the

DIGITAL OUT (OPTICAL) connector of this unit to the

amplifier.

COMMAND MODE

To 2ND CD IN

To CONTROL A1

To audio output

To CONTROL A1

CDP-CX355

ANALOG

2ND CD

IN OUT

L

R

L

R

LINE OUT

L

R

CONTROL A1

CONTROL A1II

COMMAND

MODE

CD

132

Playing CDsGetting Started

Getting Started

7

GB

I / u

+100

Inserting CDs

You can insert up to 300 discs into this player.

I/u (on/standby)

OPEN/CLOSE

JOG

1 Press I/u to turn on the player.

2 Open the front cover by pressing OPEN/CLOSE.

Rotary table

Loading position

Playing position

Disc slot at the loading position

Disc number

The disc number at the loading position appears in

the display. If the disc has the Disc Memo (see

page 24), the Disc Memo appears instead of the

disc number. As you turn the JOG dial, the disc

number or the Disc Memo changes.

Disc number or the Disc Memo

You can classify discs into eight groups by using

the Group File function. This feature lets you easily

find the disc you want to play. For details, see

“Grouping Discs” on page 28.

3 Turn the JOG dial until you find the disc slot

where you want to insert a disc, while checking the

disc number (written beside every slot and also

indicated in the display).

(Continued)

ALL

*DISC-20*

DISCS

CD1

02

DISC

I / u

+100

Getting Started

8

GB

The rotary table turns and the disc slot at the

loading position is set to the playing position.

Always close the front cover except when you

insert or remove discs.

5 Repeat Steps 3 and 4 to insert more discs.

6 Close the front cover by pressing OPEN/CLOSE.

With the label side

facing right

After inserting the disc, you can input the original

disc titles instead of the disc numbers (see

“Labeling Discs” on page 24) to locate it easily

when you start playing.

4 Insert a disc with the label side facing right.

Notes

• Do not insert an empty 8 cm (3-inch) CD adaptor (CSA-8). It

may damage the player.

• Do not attach anything such as seals or sleeves to CDs. It

may damage the player or the disc.

• If you drop a disc into the player and/or the CD won’t

go into the slot correctly, consult your nearest Sony

dealer.

• When transporting the player, remove all discs from the

player.

• Make sure to insert the disc at a right angle to the rotary

table, otherwise damage to the player and/or the disc

could result. If the disc is not inserted into the slot

completely, reinsert the disc.

• Make sure the rotary table comes to a complete stop

before inserting or removing discs.

The front panel closes automatically when you press

·. Be careful not to put your hand into the player after

pressing · otherwise your hand may be caught in the

front panel.

ALL DISCS

CD1

20

DISC

SONYHITS

Playing CDsGetting Started

Getting Started

9

GB

Removing CDs

After following Steps 1 to 3 of “Inserting CDs” on page

7, remove the discs. Then close the front cover.

To remove discs easily

After following steps 1 to 3 of “Inserting CDs” on page 7,

press p (DISC EJECT). The disc in the selected slot

moves up and you can remove the disc easily. When you

press p again, the disc returns back to the normal

position. If the disc does not return back to the normal

position, reinsert the disc.

Basic Operations

10

GB

Playing a CD

23

1

2

• See pages 4 – 5 for the hookup

information.

• Make sure you have inserted the

discs correctly as indicated on

pages 7 – 8.

• You can play all the tracks on a

disc in the original order

(Continuous Play). You can also

play up to 300 discs

consecutively.

You can turn on the player

by pressing I/u on the

remote Z

Turn on the amplifier and select the CD player position.

Press I/u to turn on the player.

Press CONTINUE to select ALL DISCS or 1 DISC Continuous

Play mode.

Each time you press CONTINUE, “ALL DISCS” or “1 DISC”

appears alternately in the display.

3

When you select

ALL DISCS

1 DISC

The player plays

All discs in the player consecutively in the order of

disc number. Empty disc slots are skipped.

Only one disc you have selected

Turn the JOG dial until the disc number or the Disc Memo (see

page 24) you want appears in the display to select the first disc

(ALL DISCS) or the disc you want (1 DISC).

4

4/55

ALL

*DISC-20*

DISCS

CD1

02

DISC

STANDBY

I / u

TIMER

OFF PLAY

KEYBOARD

CONTINUE

GROUP 1

GROUP 5

SHUFFLE

GROUP 2

GROUP 6

PROGRAM

GROUP 3

GROUP 7

REPEAT

GROUP 4

GROUP 8

TIME/TEXT

HIT LIST

GROUP FILE

DISC/CHARACTER

PUSH ENTER

MENU/NO YES

+100

EASY PLAY

MEGA CONTROL

MEMO SEARCH

X-FADE

CHECK

NO DELAY

CLEAR

FADER

PUSH ENTER

≠ AMS ±

OPEN/

CLOSE

DISC EJECT

Basic Operations

11

GB

5

Push the JOG dial or press · to start playing.

The selected disc is set to the playing position, and the player

plays all the discs from the selected one (ALL DISCS) or all the

tracks once (1 DISC).

Adjust the volume on the amplifier.

To stop playback

Press p.

When you turn off the player

The player remembers the

last playing disc and the

play mode (Continuous,

Shuffle, or Program (see

pages 17 and 18)). When you

turn on the player again,

therefore, the player plays

the same disc in the same

play mode.

OPEN/CLOSE

·

P

p

To

Pause

Resume playing after pause

Go to the next disc

Go back to the preceding disc

Go to the next track

Go back to the preceding track

Stop playing and remove the disc

You need to

Press P

Press P or ·

Press DISC SKIP + once.

Hold down the button to skip discs.

Press DISC SKIP – once.

Hold down the button to skip discs.

Turn the ≠ AMS ± dial clockwise

by one click.

Turn the ≠ AMS ± dial

counterclockwise by one click.

Press OPEN/CLOSE

JOG

≠ AMS ±

STANDBY

I / u

TIMER

OFF PLAY

KEYBOARD

CONTINUE

GROUP 1

GROUP 5

SHUFFLE

GROUP 2

GROUP 6

PROGRAM

GROUP 3

GROUP 7

REPEAT

GROUP 4

GROUP 8

TIME/TEXT

HIT LIST

GROUP FILE

DISC/CHARACTER

PUSH ENTER

OPEN/

CLOSE

MENU/NO YES

+100

EASY PLAY

MEGA CONTROL

MEMO SEARCH

X-FADE

CHECK

NO DELAY

CLEAR

FADER

DISC EJECT

PUSH ENTER

≠ AMS ±

Playing CDs

12

GB

Playing CDs

Using the Display

You can check information about the disc using the

display.

p

JOG

TIME/TEXT

Checking the total number and playing

time of the tracks

Select the disc you want to check, and press

TIME/TEXT.

The display shows the current disc number, total

number of tracks, and total playing time of the disc.

When you want to check another disc

Press DISC SKIP +/– on the remote in the stop mode to

select the disc you want to check. The total number of

tracks and the total playing time of the selected disc

appear momentarily.

Current disc number

Total number of tracks

Total playing time

Display information while playing a disc

While playing a disc, the display shows the current disc

number, track number, playing time of the track and

the next disc number.

Current disc number

Next disc number

Current track number

Playing time of the track

HIGH-LIGHT

Checking the information of CD TEXT discs

CD TEXT discs have information, such as the disc titles

or artist names, memorized in a blank space on the

discs where, on normal discs, there is no information.

The display shows the CD TEXT information of the

disc so that you can check the current disc title, artist

name and track title. When the player detects a CD

TEXT disc, “CD TEXT” appears in the display. If your

CD TEXT disc has multi-language capacity, “MULTI

CD TEXT” appears in the display. If you want to check

the information in another language, refer to “Selecting

the language of the CD TEXT information” on page 13.

Display information in stop mode

The display shows the disc title. When you press

TIME/TEXT, the artist name scrolls in the display. If

you press TIME/TEXT again, the display shows the

current disc number, total number of tracks, and total

playing time of the disc momentarily. Then the display

shows the disc title again.

MENU/NO

ALL DISCS

CD1

20

DISC

TRACK

MIN

SEC

20 10 60.48

ALL DISCS

CD1

83

DISC

TRACK

MIN

SEC

20 1 0.28

ALL DISCS

CD TEXT

CD1

DISC

SONYHITS

I / u

+100

TIME/TEXT

Playing CDsGetting Started

Playing CDs

13

GB

To play disc highlights Z

Some CD TEXT discs have a feature to play only the

highlights of the discs.

During stop mode, press HIGH-LIGHT on the remote to start

playing disc highlights.

“Hi LIGHT” flashes while playing disc highlights.

If you press HIGH-LIGHT while selecting discs without this

feature, “NO HIGHLIGHT” appears in the display.

3 Turn the JOG dial until the language you want

appears in the display.

4 Push the JOG dial to select the language.

“Reading text” appears momentarily, then the

display shows the information in the selected

language.

To check the current language

1 Press MENU/NO while playing a CD TEXT disc.

“Show lang.?” flashes.

2 Push the JOG dial.

The current language appears momentarily.

You can also check the current language while selecting a CD

TEXT disc without multi-language information.

Note

If you select a CD TEXT disc which does not contain the

information of the selected language, the display shows the

information in another language according to the disc’s

priority.

Selecting the language of the CD TEXT

information

You can select the language used to display the CD

TEXT information when you select a CD TEXT disc

with multi-language information.

Once you select the language, the display shows the

information in the selected language until you turn off

the player. If the player cannot read the language

memorized in a CD TEXT disc, “other lang.” appears.

1 Press MENU/NO in stop mode.

“Select lang.?” flashes.

2 Push the JOG dial.

The current operating language flashes.

Display information while playing a disc

Each time you press TIME/TEXT, the display shows

the information as shown below.

The current disc

number, track

number and

playing time

appear.

Press TIME/TEXT.

The current track

title appears.

This information also appears when

the player locates the track.

Press TIME/TEXT.

Notes

• If the disc title and track title have more than 13 characters,

only the first 13 characters appear in the display.

• The track title appears only when the current disc is a CD

TEXT disc or the current title has a HIT TITLE (only when

the player is in the Hit List mode) (see page 31).

ALL DISCS

CD TEXT

CD1

DISC

TRACK

MIN

SEC

ALL DISCS

CD TEXT

CD1

DISC

13

12 1 1.52

13

SONYHITS

ALL DISCS

CD TEXT

CD1

TRACK

13

HitechBlues

The current disc

title or disc

number appears.

Press TIME/TEXT.

ALL

Select lang.?

DISCS

MULTI CD TEXT

CD1

21

ALL

English ?

DISCS

MULTI CD TEXT

CD1

21

Playing CDs

14

GB

Locating a disc on the player

Turn the JOG dial until the desired disc number or

Disc Memo (see page 24) appears in the display. Push

the JOG dial to start play.

To skip discs quickly

Press +100. Each time you press +100, the player skips

100 discs.

Locating a Specific Disc

JOG

MEMO SEARCH

DISC

ENTER

MEMO SCAN

·

Number

buttons

>10

Locating a disc directly using the remote

1 Press DISC.

2 Press the number button of the disc.

Example: To enter number 35

Press 3 then 5.

To enter number 100

Press 1, then 10/0 twice.

3 Press ENTER to start play.

Locating a disc by scanning each Disc

Memo (Memo Scan) Z

You can locate a desired disc to play quickly by

scanning the Disc Memos (see page 24) in the display .

Note that you cannot use this function in the ALL

DISCS Shuffle Play mode.

1 Press MEMO SCAN.

“MEMO SCAN” appears in the display, and the

Disc Memos scroll in the display.

2 Press · when the Disc Memo of the desired disc

to play appears.

The disc is set to the playing position, and the

player starts playing.

In Program Play mode, the disc will be added to

the end of the program if you press ENTER instead

of ·.

Note

If “NO ENTRY” appears in the display, no disc has been

labeled with the Disc Memo. Try the Memo Scan function

again after labeling the discs.

≠ AMS ±

+100

I / u

+100

Playing CDsGetting Started

Playing CDs

15

GB

The characters which are displayed as the first

character.

A B C D E F G H I J K L M N O P Q R S T U V W X

Y Z 0 1 2 3 4 5 6 7 8 9

If “NOT FOUND” appears in the display while

inputting the first character with the ≠ AMS

± dial, no disc has been labeled using the input

character.

Notes

• When searching for input characters, blanks and

symbols before the first character in the Disc Memo are

ignored.

• When searching input characters, upper and lower

cases cannot be differentiated.

3 Push the JOG dial to select the disc.

In Program Play mode, the disc will be added to

the end of the program.

To cancel Memo Search

Press MEMO SEARCH again.

First character

Locating a disc searching for a specific Disc

Memo (Memo Search)

You can search for and locate a desired disc by the first

character of the Disc Memo (see page 24). The Memo

Search function can display the Disc Memo in

alphabetical order.

1 Press MEMO SEARCH.

“MEMO SEARCH” appears in the display.

2 Turn the JOG dial to find the desired disc.

As you turn the JOG dial, the Disc Memos starting

with the input character appear in the display.

ALL DISCS

CD1

S

SONYHITS

Specifying the Next Disc to

Play

You can specify the next disc to play while playing a

disc in Continuous or 1 DISC Shuffle Play mode.

While playing a disc, turn the JOG dial. “NEXT DISC”

appears in the display and the disc number or Disc

Memo (see page 24) changes as you turn the JOG dial.

When the desired disc number or Disc Memo appears

in the display, stop turning the JOG dial.

After the current disc is played, the next disc you have

specified starts playing.

If you want to skip to the next disc right away, push

the JOG dial while playing the current disc.

To cancel the disc you have specified

Press CONTINUE twice.

Next disc number or

the Disc Memo

Playing the Disc Which was

Just Inserted – Easy Play

You can play the disc which was just inserted only by

pressing one button.

1 Open the front cover by pressing OPEN/CLOSE.

2 Press EASY PLAY.

Slot 1 moves into loading position.

3 Insert the disc in slot 1.

4 Press EASY PLAY.

The EASY PLAY button is lit and the player starts

playing the disc in slot 1.

Note

The Easy Play function can only play the disc in slot 1.

To cancel the Easy Play function

Press p.

ALL DISCS

CD1

NEXT DISC

38

*DISC-38*

Playing CDs

16

GB

Locating a Specific Track or a

Point in a Track

You can quickly locate any track while playing a disc

by using the ≠ AMS ± (AMS: Automatic Music

Sensor) dial or by using the =/+ buttons on the

remote. You can also locate a specific point in a track

while playing a disc.

Number

buttons

=/+

0/)

To locate

the next or

succeeding tracks

the current or

preceding tracks

a specific track

directly Z

a point in a track

while monitoring the

sound Z

a point in a track

quickly by observing

the display Z

You need to

Turn the ≠ AMS ± dial

clockwise until you find the track

Turn the ≠ AMS ± dial

counterclockwise until you find the

track

Press the number button of the track

on the remote. When you directly

locate a track numbered over 10, press

>10 first, then the corresponding

number buttons.

Press 0 (backward)/) (forward)

on the remote and hold down until

you find the point

Press 0 (backward)/) (forward)

on the remote and hold down until

you find the point during pause. You

will not hear the sound during the

operation.

>10

Note

If “– OVER –” appears in the display, the disc has reached the

end while you were pressing ). Turn the ≠ AMS ±

dial counterclockwise or press 0 to go back.

≠ AMS ±

I / u

+100

Playing CDsGetting Started

Playing CDs

17

GB

Playing in Random Order

(Shuffle Play)

You can have the player “shuffle” the tracks and play

in random order. The player shuffles all the tracks on

all discs or on the disc you specify.

JOGSHUFFLE

·

Playing Repeatedly

You can play discs/tracks repeatedly in any play

mode.

Press REPEAT while playing a disc.

“REPEAT” appears in the display. The player repeats

the discs/tracks as follows:

When the disc is played in

ALL DISCS Continuous Play

(page 10)

1 DISC Continuous Play

(page 10)

ALL DISCS Shuffle Play

(page 17)

1 DISC Shuffle Play

(page 18)

Program Play (page 18)

To cancel Repeat Play

Press REPEAT twice.

Repeating the current track

You can repeat only the current track.

While the track you want is being played, press

REPEAT repeatedly until “REPEAT 1” appears in the

display.

To cancel Repeat 1

Press REPEAT.

The player repeats

All tracks on all discs

All tracks on the current disc

All tracks on all discs in

random order

All tracks on the current disc

in random order

The same program

REPEAT

Playing all tracks on all discs in random

order

1 Press SHUFFLE.

“ALL DISCS” and “SHUFFLE” appear in the

display.

2 Push the JOG dial or press ·.

ALL DISCS Shuffle Play starts.

“

” appears in the display while the player is

“shuffling” the discs or the tracks.

·

SHUFFLE

DISC

Number

buttons

ENTER

I / u

+100

I / u

+100

Playing CDs

18

GB

Creating Your Own Program

(Program Play)

You can arrange the order of the tracks and/or discs to

create three different programs which are stored

automatically. A program can contain up to 32 “steps”;

one “step” may contain a track or a whole disc.

You can make programs using the controls on the

remote as well as ones on the player. However, the

programming procedures are different.

Creating a program on the player

1 Press PROGRAM until the desired program

number (PROGRAM 1, 2, or 3) appears in the

display.

If a program is already stored in the selected

program number, the last step of the program

appears in the display. When you want to erase the

whole program, hold down CLEAR until

“CLEAR” appears in the display (see page 20).

2 Turn the JOG dial until the disc number you want

appears in the display.

JOG

PROGRAM

CHECK

3 To program a whole disc, skip this step.

Turn the ≠ AMS ± dial until the desired

track number appears in the display.

Track number

·

CLEAR

Playing all tracks on a specified disc in

random order

1

Press SHUFFLE twice.

“1 DISC” and “SHUFFLE” appear in the display.

2 Turn the JOG dial until the desired disc number

appears in the display.

When using the remote, press DISC first and then

press the number button of the disc.

3 Push the JOG dial or press ·.

When using the remote, press ENTER.

1 DISC Shuffle Play starts.

“

” appears in the display while the player is

“shuffling” the tracks.

To cancel Shuffle Play

Press CONTINUE.

You can start Shuffle Play while playing

Press SHUFFLE, and Shuffle Play starts from the current

track.

You can directly select a disc for 1 DISC Shuffle Play

See “Locating a disc directly using the remote” on page

14.

You can go to the next disc during 1 DISC Shuffle Play

Press DISC SKIP +.

You can specify the next disc to play during 1 DISC

Shuffle Play

Turn the JOG dial to specify the next disc. After all the

tracks on the current disc are played in random order,

the next disc starts playing. If you want to skip to the

next disc right away, push the JOG dial while playing the

current disc.

Notes

• You cannot specify the next disc to play during ALL DISCS

Shuffle Play.

• Even if you press p or turn off the player during ALL

DISCS Shuffle Play, the player remembers which discs or

tracks were played and which were not. Therefore, if you

want to start ALL DISCS Shuffle Play again from the

beginning, be sure to repeat the procedure from Step 1.

≠ AMS ±

PROGRAM

1

CD1

DISC

20

*DISC-20*

PROGRAM

1

CD1

DISC

TRACK

STEP

20

20 3 1

I / u

+100

Playing CDsGetting Started

Playing CDs

19

GB

3 Press the number button of the disc.

>10

DISC

CHECK

·

PROGRAM

Number

buttons

ENTER

CLEAR

1 Press PROGRAM until the program number you

want (PROGRAM 1, 2, or 3) appears in the display.

2 Press DISC.

4 If you program a whole disc, press ENTER and go

to Step 6. If you program a desired disc, press >10.

5 Press the number button of the track.

When the disc has more than 10 tracks, press 0 first

then press the corresponding number to enter a

track number from 1 to 9.

4 Push the JOG dial.

5 To program other discs/tracks, do the following:

To program

All tracks of another disc(s)

Other tracks on the same disc

Other tracks on other discs

6 Push the JOG dial or press · to start Program

Play.

To cancel Program Play

Press CONTINUE.

The programs remain even after Program Play ends

When you push the JOG dial or press ·, you can play

the same program again.

When you press PROGRAM to select Program Play

during Continuous or Shuffle Play

The program will be played after the current track.

The program remains until erased

Even if you replace discs, the programmed disc and track

numbers remain. Therefore, the player will play the new

existing disc and track numbers. However, the

programmed disc and track numbers that are not found

in the player or on the disc are deleted from the program,

and the rest of the program is played in the programmed

order.

Note

If you press one of the GROUP 1 – 8 buttons to start Group

Play, Program Play will be canceled (see page 29).

Repeat Steps

2 and 4

3 and 4

2 to 4

The disc being

programmed

Playing order

The track being programmed

Creating a program using the remote Z

The disc being programmed

The track being programmed

Playing order

PROGRAM

1

CD1

DISC

TRACK

STEP

20

20 3 1

PROGRAM

1

CD1

DISC-[ _]

02

PROGRAM

1

CD1

DISC-[ 20]

02

PROGRAM

1

CD1

DISC

TRACK

STEP

20 -- 1

02

PROGRAM

1

DISC

TRACK

STEP

20

20 3 1

(Continued)

Playing CDs

20

GB

Changing the programmed order

You can change your program before you start playing.

To

Erase a track or disc

Erase the last track or

disc in the program

Add tracks or discs to the

end of the program

Change the whole

program completely

You need to

Press CHECK until the track or

disc you do not want appears in

the display, then press CLEAR

Press CLEAR. Each time you

press the button, the last

programmed track or disc will be

cleared.

Follow the programming

procedure

Hold down CLEAR until

“CLEAR” appears in the display

to erase the whole program, then

create a new program following

the programming procedure

6 To program other discs/tracks, do the following:

To program

All tracks of another disc(s)

Other tracks on the same disc

Other tracks on other discs

7 Press · to start Program Play.

To cancel Program Play

Press CONTINUE.

Checking the programmed order

You can check your program before or after you start

playing.

Press CHECK.

Each time you press this button, the display shows the

disc and track number of each step in the programmed

order. (When a whole disc is programmed as one step,

“ALL” appears instead of the track number.) After the

last step in the program, the display shows “– END –”

and returns to the original display.

Repeat Steps

2 to 4

5

2 to 5

Erasing the program stored in memory

1 Press PROGRAM repeatedly in the stop mode

until the program number (PROGRAM 1, 2, or 3)

you want to erase appears in the display.

2 Hold down CLEAR until “CLEAR” appears in the

display.

Playing Using a Timer

You can start playing a disc at any given time by

connecting a timer (not supplied). Refer also to the

instructions for the timer if you need help.

TIMER

Play mode buttons

1 Press one of the play mode buttons to select the

desired play mode.

2 Set TIMER on the player to PLAY.

3 Set the timer to the desired time.

The player turns off. When the set time comes, the

player turns on and starts playing.

4 After you have used the timer, set TIMER on the

player to OFF.

I / u

+100

La page est en cours de chargement...

Sony CDP-CX355 Le manuel du propriétaire

Sony CDP-CX355 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents