Philips AC1214/40 Manuel utilisateur

AC1214

AC1213

EN User manual 1 FR Mode d’emploi 21

4241 210 91381

1 2

J K L M N

AC1214

AC1213

E

F

G

H

I

A

B

D

C

3s

Contents

1 IMPORTANT SAFEGUARDS 2

2 Your air purier 8

Product overview (Fig.a) 8

Controls overview (Fig.b) 8

3 Getting started 8

Installing the lters 8

Setting up the Wi-Fi connection

for the rst time 9

Setting up the Wi-Fi connection

when the network has changed 10

4 Using the air purier 10

Understanding the air quality

light 10

Turning on and o 11

Changing the fan speed 11

Light sensor 12

Night sensing mode 12

Setting the child lock 12

5 Cleaning 13

Cleaning the body of the air

purier 13

Cleaning the air quality sensor 13

Cleaning the pre-lter 14

6 Replacing the lters 15

Filter replacement indicator 15

Replacing the lters 15

Filter reset 16

1EN

English

7 Storage 16

8 Troubleshooting 17

9 Warranty 19

10 Accessories 20

11 Disposal 20

2 EN

• Do not let water or any

other liquid or flammable

detergent enter the

appliance to avoid electric

shock and/or a fire

hazard.

• Do not clean the

appliance with water,

any other liquid, or a

(flammable) detergent to

avoid electric shock and/

or a fire hazard.

• Do not spray any

flammable materials

such as insecticides or

fragrance around the

appliance.

• Check if the voltage

indicated on the

appliance corresponds to

the local power voltage

before you connect the

appliance to the electrical

outlet.

• Always switch the air

purifier OFF and unplug

from the electrical outlet

after using and before

cleaning, moving and

changing the filters. Be

sure to remove the plug

from the outlet. Never

handle the power plug

with wet or damp hands.

1 IMPORTANT

SAFEGUARDS

READ AND SAVE THESE

SAFETY INSTRUCTIONS

BEFORE USING THIS AIR

PURIFIER

When using electrical

appliances, basic precautions

should always be followed to

reduce the risk of fire, electric

shock, and injury to persons,

including the following:

• Read all instructions

before operating the air

purifier.

• Do not expose the air

purifier to rain, or use

near water, in a bathroom,

laundry area or other

damp location.

• Do not use the air purifier

where combustible gases

or vapors are present.

• Do not block the air inlet

and outlet by placing

items on the air outlet

or in front of the air inlet.

Do not insert fingers or

foreign objects into the air

outlet or air inlet.

• Do not run cord under

carpeting. Do not cover

cord with throw rugs,

runners, or similar

coverings. Do not route

cord under furniture or

appliances. Arrange cord

away from traffic area

and where it will not be

tripped over.

• The cord should be

arranged so that it will not

drape over the edge of

a counter or table where

it could be pulled by

children or tripped over

unintentionally.

• Do not operate this

appliance if it has a

damaged power cord,

plug or motor, if it is

not working properly

or after the appliance

malfunctions or has been

damaged in any manner.

For assistance call

1-866-309-8817.

• Close supervision is

necessary when the

appliance is used by,

on, or near children or

invalids.

• Only use the power cord

supplied with the air

purifier.

• Keep the cord out of

heavy traffic areas and

arrange cord so that it will

not be tripped over.

• Do not put the cord under

carpets or throw rugs or

near heat vents and open

flames.

• Locate the air purifier near

an electrical outlet and

avoid using an extension

cord.

• Do not use the plug in

or near a power outlet

that contains an electric

air freshener to prevent

damage to the plug.

• Do not use the air purifier

outdoors. For indoor use

only.

• If an extension cord must

be used, exercise care.

• The marked electrical

rating of the cord must be

as great as the rating of

the air purifier.

• Do not operate any air

purifier with a damaged

cord or plug. Discard air

purifier or call 1-866-309-

8817 for assistance.

3EN

English

energy and, if not installed

and used in accordance with

the instructions, may cause

harmful interference to radio

communications. However,

there is no guarantee that

interference will not occur

in a particular installation.

If this product does cause

harmful interference to radio

or television reception, which

can be determined by turning

the equipment off and on,

the user is encouraged to try

to correct the interference by

one or more of the following

measures:

• Reorient or relocate the

receiving antenna.

• Increase the separation

between the equipment

and receiver.

• Connect the equipment

into an outlet on a circuit

different from that to

which the receiver is

connected.

• Consult the dealer or an

experienced radio/TV

technician for help.

• This appliance is not a

toy. Children should be

supervised to ensure they

do not play with the air

purifier.

WARNING: To reduce the

risk of fire or electric shock,

do not use this air purifier

with any solid-state speed

control device.

This device complies with

Part 15 of the FCC Rules.

Operation is subject to the

following two conditions:

(1) This device may not cause

harmful interference, and

(2) This device must accept

any interference received,

including interference

that may cause undesired

operation.

Note: This product has been

tested and found to comply

with the limits for a Class

B digital device, pursuant

to Part 15 of the FCC Rules.

These limits are designed

to provide reasonable

protection against harmful

interference in a residential

installation. This product

generates, uses, and can

radiate radio frequency

4 EN

the antenna type and its gain

should be so chosen that

the equivalent isotropically

radiated power (e.i.r.p.) is not

more than that necessary for

successful communication.

This equipment should be

installed and operated with

a minimum distance 20cm

between the radiator and

your body.

Caution

• This appliance is not

a substitute for proper

ventilation, regular

cleaning, or use of an

exhaust fan or hood while

cooking.

• A loose fit between the

AC outlet (receptacle)

and plug may cause

overheating and a

distortion of the plug.

Contact a qualified

electrician to replace

loose or worn outlet.

• Never use the air

purifier unless it is fully

assembled and with filters

in place.

• The air purifier must

be used in its upright

position.

Please take attention that

changes or modification

not expressly approved by

the party responsible for

compliance could void the

user’s authority to operate the

equipment.

This equipment should be

installed and operated with

a minimum distance 20cm

between the radiator and

your body.

This device complies with

Industry Canada licence-

exempt RSS standard(s).

Operation is subject to the

following two conditions:

(1) this device may not cause

interference, and

(2) this device must accept

any interference, including

interference that may cause

undesired operation of the

device.

Under Industry Canada

regulations, this radio

transmitter may only operate

using an antenna of a type

and maximum (or lesser) gain

approved for the transmitter

by Industry Canada. To

reduce potential radio

interference to other users,

5EN

English

• Do not sit, stand or place

heavy objects on the air

purifier.

• Do not place the

appliance directly below

an air conditioner to

prevent condensation

from dripping onto the

appliance.

• Make sure all filters

are properly installed

before you switch on the

appliance.

• Only use the original

Philips filters specially

intended for this

appliance. Do not use any

other filters.

• Do not use the filter

as fuel or for similar

purposes.

• Avoid knocking against

the appliance (the air inlet

and outlet in particular)

with hard objects.

• Always lift or move the

appliance by the handle

on back side of the

appliance.

• NEVER tilt, move or

attempt to change or

replace a filter while the

air purifier is operating.

Switch OFF and unplug

• Make sure the air purifier

is assembled/connected

properly after cleaning

the air quality sensor and

pre-filter or replacing the

filters.

• If the air purifier will not

be used for a long period

of time, unplug from the

electrical outlet, clean

the appliance, air quality

sensor and pre-filter (see

'Cleaning') before storing.

• Make sure that you

plug the appliance into

a properly connected

electrical outlet.

• Always place and use the

appliance on a dry, stable,

level, and horizontal

surface. Make sure the air

purifier cannot be easily

knocked over by a person

or object.

• Leave at least 20cm/8in

free space behind and

on both sides of the

appliance and leave

at least 30cm/12in

free space above the

appliance.

• Do not place anything on

top of the appliance.

6 EN

recommended by Philips

Electronics North America

Corporation.

• The appliance does

not remove carbon

monoxide (CO) or radon

(Rn). It cannot be used

as a safety device in

case of accidents with

combustion processes

and hazardous chemicals.

• Always wash your hands

thoroughly after changing

or cleaning a filter.

• Unplug the appliance to

override smart enabled or

remote functions.

SAVE THESE

INSTRUCTIONS

This appliance has a

polarized plug (one blade

is wider than the other). To

reduce the risk of electric

shock, this plug is intended

to fit in a polarized outlet

only one way. If the plug

does not fit fully in the

outlet, reverse the plug. If it

still does not fit, contact a

qualified electrician. DO NOT

ATTEMPT TO DEFEAT THIS

SAFETY FEATURE.

from the electrical outlet.

Do not move the air

purifier by pulling on the

power cord.

• Do not use this appliance

when using indoor

smoke-type insect

repellents or in places

with oily residues, burning

incense, or chemical

fumes.

• Do not use the appliance

near gas appliances,

heating devices or

fireplaces.

• Do not use the appliance

in a room with major

temperature changes,

as this may cause

condensation inside the

appliance.

• To prevent interference,

place the appliance at

least 2 meters/6 1/2 feet

away from electrical

appliances that use

airborne radio waves such

as TVs, radios, and radio-

controlled clocks.

• Use this air purifier for

its intended household

use as described in

this manual. Do not

use attachments not

7EN

English

3 Getting started

Installing the lters

Note

• Make sure the air purifier is unplugged

from the electrical outlet before

installing the filters.

• Make sure the side of the filter with the

tag is pointing towards you.

1 Pull the bottom part of the front

panel and gently lift to remove it

from the air purifier (Fig.c).

2 Press the clip down (1) and pull the

pre-filter towards you (2) (Fig.d).

3 Remove all filters (Fig.e).

4 Remove all packaging materials

from the filters (Fig.f).

5 Place the thick HEPA filter (FY1410)

into the air purifier and then the

thin Active Carbon filter (FY1413)

(Fig.g). The model numbers are

shown on each filter.

6 Attach the pre-filter back into the

air purifier (Fig.h).

Note

• Make sure the side with the clip is

pointing towards you, and that all

hooks of the pre-filter are properly

attached to the purifier.

7 Reattach the front panel by

pressing the top part of the panel

onto the top of the air purifier (1).

Then, gently push the panel against

the body of the air purifier (2)

(Fig.i).

8 Wash your hands thoroughly after

installing filters.

2 Your air purifier

Congratulations on your purchase, and

welcome to Philips!

To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome.

Product overview (Fig.a)

A Control panel

B Air quality light

C Air outlet

D Air quality sensor

E

NanoProtect True HEPA filter

(FY1410)

F

NanoProtect Active Carbon filter

(FY1413)

G Pre-filter

H Air inlet

I Front panel

Controls overview (Fig.b)

J On/Off button

K Night sensing mode button

L Display screen

M Fan speed button

N Child lock button

8 EN

1 Put the plug of the air purifier in the

wall outlet and touch to turn on

the air purifier.

» The Wi-Fi indicator is not

displayed on the screen when

using the air purifier for the first

time.

2 Download and install the 'Air

Matters' App developed by

FreshIdeas Studio or Philips

'HealthSuite health' App from the

App Store or Google Play.

3 Touch and simultaneously for

3 seconds until you hear a beep.

» The air purifier goes to pairing

mode.

» The Wi-Fi indicator blinks

orange.

4 Make sure that your mobile device

is successfully connected to your

Wi-Fi network.

5 Launch the 'Air Matters' or Philips

'HealthSuite health' App and

follow the onscreen instructions

to connect the air purifier to your

network.

6 After the successful pairing and

connection, the Wi-Fi indicator

will light up white. If pairing

is not successful, consult the

troubleshooting section, or the

help section in the 'Air Matters'

or Philips 'HealthSuite health'

App for extensive and up-to-date

troubleshooting tips.

Setting up the Wi-Fi

connection for the rst

time

Note

• This function is for AC1214 only.

• This instruction is only valid when

the air purifier is being set up for the

first time. If the network has changed

or the setup needs to be performed

again, consult section “Setting up the

Wi-Fi connection when the network

has changed” on page 10.

• You cannot set up two air purifiers at

the same time. If you want to set up

more than one air purifier, you can

only do it successively.

• Make sure that the distance between

your mobile device and the air purifier

is less than 33 ft/10 m without any

obstructions.

9EN

English

4 Using the air

purifier

Understanding the air

quality light

Indoor Allergen Index (IAI) is a

real-time numerical display that provides

visual and immediate feedback on

indoor allergen level.

IAI Air quality

light color

Air quality

level

1-3 Blue Good

4-6 Blue-violet Fair

7-9 Red-purple Poor

10-12 Red Very poor

The air quality light automatically goes

on when the air purifier is switched on,

and lights up all colors in sequence.

After approximately 30 seconds, the

air quality sensors select the color that

corresponds to the surrounding air

quality of airborne particles.

Setting up the Wi-Fi

connection when the

network has changed

Note

• This function is for AC1214 only.

• This applies when your default network

connected with your air purifier has

changed.

1 Put the plug of the air purifier in the

wall outlet and touch to turn on

the air purifier.

» The Wi-Fi indicator blinks

white.

2 Touch and simultaneously for

3 seconds until you hear a beep.

» The air purifier goes to pairing

mode.

» The Wi-Fi indicator blinks

orange.

3 Enter your Wi-Fi network name

and password in the App on your

mobile device. The network name

and password are case-sensitive.

4 Follow the steps 5-6 in "Setting up

the Wi-Fi connection for the first

time" section.

10 EN

Changing the fan speed

There are several fan speeds available.

You can choose the auto mode, speed

1, 2, 3 or turbo mode (t).

Auto(A)

• Touch the fan speed button

repeatedly to select the auto mode

(Fig.k).

Allergen mode

The specially designed allergen

mode can effectively reduce common

allergens such as pollen and pet

dander.

• Touch the fan speed button to

select the Allergen mode (Fig.l).

» Auto (A) and display on the

screen.

Manual

• Touch the fan speed button

repeatedly to select the fan speed

you need (Fig.m).

Turbo (t)

In turbo mode, the air purifier operates

on the highest speed.

• Touch the fan speed button to

select the turbo mode (t) (Fig.n).

Turning on and o

Note

• Always place the air purifier on a

stable, horizontal, and level surface

with the front of the unit facing away

from walls or furniture.

• For optimum purification performance,

close doors and windows.

• Keep curtains away from the air inlet or

air outlet.

1 Put the plug of the air purifier in the

wall outlet.

2 Touch to switch on the air purifier

(Fig.j).

» The air purifier beeps.

» The air purifier operates under

the auto mode by default.

» When the air purifier is warming

up, " " displays on the screen.

» After measuring the air

quality for approximately

30 seconds, the air quality

sensor automatically selects

the appropriate air quality light

color.

3 Touch and hold for 3 seconds to

switch off the air purifier.

Note

• If the air purifier stays connected to

the electrical outlet after turning OFF,

the air purifier will operate under the

previous settings when turned ON

again.

• If the air purifier accidentally shuts off

during running, it restarts automatically

and operates under previous settings

when the power supply is resumed.

11EN

English

Auto activating the night

sensing mode

When the air purifier operates in auto

mode or allergen mode, if the light

sensor detects the lights in your room

are turned off, the air purifier goes to

the night sensing mode automatically.

The air purifier will adjust the fan speed

in real-time to make sure the air in your

room is good. The air quality light will be

dimmed.

Note

• The light sensor detects the lights in

your room after 11 hours in the night

sensing mode.

• If the lights in your room are turned

on, the air purifier will quit the night

sensing mode and operate under the

previous mode. The air quality light

and the display will be on again.

• To exit the night sensing mode

manually, touch or button.

Setting the child lock

1 Touch and hold the child lock

button for 3 seconds to activate

child lock (Fig.p).

» The child lock icon displays

on the screen.

» When the child lock is on,

all the other buttons are not

responsive, only the child lock

icon blinks.

2 Touch and hold the child lock

button for 3 seconds again to

deactivate child lock (Fig.q).

» The child lock icon

disappears.

Light sensor

With the light sensor, the air purifier can

work according to the ambient light.

When the ambient light dims for 10

seconds, all the lights on the control

panel will turn off slowly. During this

period, you can touch any of the

buttons, all lights will turn on again. If

you don't perform other operations

within 10 seconds, all lights will turn off.

After the ambient light becomes bright

and lasts at least for 10 seconds, all

lights will turn on again.

Night sensing mode

You can activate the night sensing

mode in two ways.

Activating the night sensing

mode manually

• Before you go to sleep, touch

manually to activate the night

sensing mode (Fig.o).

» If the air quality light is blue,

the air purifier directly goes to

the night sensing mode. The air

purifier operates quietly and the

air quality light will be dimmed.

» If the air quality light is not blue,

the air purifier operates under

turbo mode for a maximum of

10 minutes, the air quality light

blinks slow during this time, and

then goes to the night sensing

mode.

12 EN

5 Cleaning

Note

• Always turn the air purifier off and

unplug the air purifier from the

electrical outlet before cleaning.

• Never immerse the air purifier in water

or any other liquid.

• Never use abrasive, aggressive, or

flammable cleaning agents such as

bleach or alcohol to clean any part of

the air purifier.

• Only the pre-filter is washable. The air

filter is not washable.

• Do not attempt to clean the filters or

air quality sensor with a vacuum.

Cleaning the body of the

air purier

Regularly clean the inside and outside

of the air purifier to prevent dust from

collecting.

1 Use a soft, dry cloth to clean both

the interior and exterior of the air

purifier.

2 The air outlet can also be cleaned

with a dry, soft cloth.

3 Detach the front cover from the air

purifier and wash it under running

tap water.

Cleaning the air quality

sensor

Clean the air quality sensor every

2 months for optimal functioning of the

purifier.

Note

• The child lock function is automatically

unlocked when the pre-filter cleaning

code or the filter replacement code

displays on the screen.

13EN

English

Note

• If the air purifier is used in a dusty

environment, it may need to be

cleaned more often.

• If the humidity level in the room is

very high, condensation may develop

on the air quality sensor and the air

quality light may indicate a more poor

air quality even though the air quality

is actually good. If this occurs, clean

the air quality sensor or use the air

purifier on a manual speed setting.

1 Switch off the air purifier and

unplug from the wall outlet.

2 Clean the air quality sensor inlet

and outlet with a soft brush (Fig.r).

3 Remove the air quality sensor cover

(Fig.s).

4 Clean the air quality sensor, the

dust inlet and the dust outlet with a

damp cotton swab (Fig.t).

5 Dry all parts thoroughly with a dry

cotton swab.

6 Reattach the air quality sensor

cover (Fig.u).

Note

• Always keep air quality cover closed

while the air purifier is working.

Cleaning the pre-lter

Clean the pre-filter when F0 is displayed

on the screen (Fig.v).

1 Switch off the air purifier and

unplug from the wall outlet.

2 Pull the bottom part of the front

panel and then gently lift to remove

it from the air purifier (Fig.c).

14 EN

3 Press the clip down (1) and pull the

pre-filter towards you (2) (Fig.d).

4 If the pre-filter is very dirty, use a

soft brush to brush away the dust.

Then wash the pre-filter under

running tap water (Fig.w).

5 Allow the pre-filter to air dry

thoroughly before placing back in

the air purifier.

Note

• To optimize the lifetime of the pre-

filter, make sure it dries completely

after cleaning.

• Wash your hands after handling the

filter.

6 Put the pre-filter back into the air

purifier (Fig.h).

Note

• Make sure the side with the clip is

pointing towards you, and that all

hooks of the pre-filter are properly

attached to the air purifier.

7 To reattach the front panel, press

the top part of the panel onto the

top of the air purifier (1). Then,

gently push the panel against the

body of the air purifier (2) (Fig.i).

8 Put the plug of the air purifier in the

wall outlet.

9 Touch and hold the for

3 seconds to reset the pre-filter

cleaning time (Fig.x).

10 Wash your hands thoroughly after

installing filters.

6 Replacing the

filters

Filter replacement

indicator

This air purifier is equipped with a

filter replacement indicator to make

sure that the air purification filter is in

optimal condition when the air purifier

is operating. When the filters need to be

replaced, the filter code displays on the

screen.

If the filters are not replaced in 14 days,

the air purifier will stop operating and

automatically lock.

Replacing the lters

Note

• The HEPA and Active Carbon filters are

not washable or reusable.

• Always turn off the air purifier and

unplug from the electrical outlet

before replacing the filters.

• Do not clean the filter with a vacuum.

• If the pre-filter is damaged, worn or

broken, do not use. Visit

www.philips.com/support or call

1-866-309-8817 for assistance.

15EN

English

Filter alert light

status

Action

A3 displays on

the screen

Replace

NanoProtect True

HEPA filter (FY1410)

C7 displays on

the screen

Replace

NanoProtect Active

Carbon filter (FY1413)

A3 and C7

display on

the screen

alternately

Replace both filters

1 Turn off the air purifier and unplug

from the wall outlet.

2 Take out the used air filter according

to the filter alert light status

displayed on the screen (Fig.y).

Discard used filters.

Note

• Do not touch the pleated filter surface,

or smell the filter as it has collected

pollutants from the air.

3 Remove all packaging material from

the new filter (Fig.f).

4 Place the new filters into the air

purifier (Fig.g).

5 Put the plug of the air purifier in the

wall outlet.

6 Touch and hold the for 3 seconds

to reset the filter lifetime counter

(Fig.z).

7 Wash your hands after changing a

filter.

Note

• This air purifier has no other user-

serviceable parts. For assistance, call

1-866-309-8817.

Filter reset

You can replace filters even if there is

no filter replacement code displayed on

the screen. After replacing a filter, you

need to reset the filter lifetime counter

manually.

1 Touch and simultaneously

for 3 seconds to enter the filter reset

mode (fig.{).

» Code (A3) of the NanoProtect

True HEPA filter displays on the

screen.

2 Touch and hold for 3 seconds to

force reset the filter lifetime counter

of the NanoProtect True HEPA filter

(fig.z).

3 Code (C7) of the Nanoprotect Active

Carbon filter displays on the screen

after the lifetime counter of the

NanoProtect True HEPA filter has

been reset (fig.|).

4 Touch and hold for 3 seconds to

force reset the filter lifetime counter

of the NanoProtect Active Carbon

filter and exit the filter reset mode

(fig.}).

16 EN

7 Storage

1 Turn off the air purifier and unplug

from the wall outlet.

2 Clean the air purifier, air quality

sensor and pre-filter (see chapter

‘Cleaning’).

3 Let all parts dry thoroughly before

storing.

4 Wrap the filter and pre-filter

separately in air tight plastic bags.

5 Store the air purifier, the filter and

pre-filter in a cool, dry location.

6 Always thoroughly wash hands

after handling filters.

8 Troubleshooting

This chapter summarizes the most common problems you could encounter with the air

purifier. If you are unable to solve the problem with the information below, visit www.

philips.com/support or call 1-866-309-8817 for assistance.

Problem Possible solution

The air purier

does not work

even though it is

plugged in to the

wall outlet and

switched on.

• Try a different electrical outlet or check the wall switch.

• The filter alert status is displaying the filter code. Replace

the corresponding filter and reset the filter lifetime counter

(see chapter "Replacing the filter").

• If the problem persists, visit www.philips.com/support or

call 1-866-309-8817 for assistance.

The air purier

does not work

even though it is

switched on.

• The filter replacement indicator has been on continuously

but you have not replaced the corresponding filter, and the

air purifier is now locked. In this case, replace the filter and

reset the filter lifetime counter.

The air purier

accidentally

powers o.

• The air purifier restarts automatically and goes to the

previous mode when the power resumes.

The Wi-Fi setup is

not successful.

• If the router your purifier is connected to is dual – band

and currently it is not connecting to a 2.4GHz network,

please switch to another band of the same router (2.4GHz)

and try to pair your purifier again. 5Ghz networks are not

supported.

• Web authentication networks are not supported.

• Check if the purifier is within range of the Wi-Fi router. You

can try to locate the air purifier closer to the Wi-Fi router.

• Check if the network name is correct. The network name is

case-sensitive.

• Check if the Wi-Fi password is correct. The password is

case-sensitive.

• Retry the setup with the instructions in section ‘Set up the

Wi-Fi connection when the network has changed’.

• The Wi-Fi connectivity can be interrupted by

electromagnetic or other interferences. Keep the appliance

away from other electronic devices that may cause

interferences.

• Check if the mobile device is in airplane mode. Make sure

to have the airplane mode deactivated when connecting

to the Wi-Fi network.

• Consult the help section in the App for extensive and up-

to-date troubleshooting tips.

17EN

English

18 EN

Problem Possible solution

The airow that

comes out of

the air outlet

is signicantly

weaker than

before.

• The pre-filter is dirty. Clean the pre-filter (see chapter

"Cleaning").

The air quality

does not improve,

even though the air

purier has been

operating for a

long time.

• One of the filters has not been placed in the air purifier or

the filter is not placed properly. Make sure that all filters

are properly installed in the following order, starting with

the innermost filter:

1) NanoProtect True HEPA filter (FY1410); 2) NanoProtect

Active Carbon filter (FY1413) 3) pre-filter.

• The air quality sensor is wet. Make sure that the air quality

sensor is clean and dry (see chapter "Cleaning").

The color of the air

quality light always

stays the same.

• The air quality sensor is dirty. Clean the air quality sensor

(see chapter "Cleaning").

The air purier

produces a

unpleasant smell.

• The first few times you use the air purifier, it may produce

a plastic smell. This is normal. The air purifier may also

produce an unpleasant smell when the filter is dirty. In this

case, clean or replace the appropriate filter.

• If the air purifier produces a burnt odor, switch OFF and

unplug from the electrical outlet. Call 1-866-309-8817 for

assistance.

The air purier is

loud.

• If the air purifier is too loud, change the fan speed to a

lower fan speed level. When using the air purifier in a

bedroom at night, choose the night sensing mode or select

a lower fan speed level.

The air purier still

indicates that I

need to replace a

lter, but I already

did.

• Perhaps you did not reset the filter lifetime counter. Plug

in the air purifier, touch to switch on the air purifier, and

touch and hold the for 3 seconds.

Error codes "E1",

"E2", "E3" or "E4"

displays on the

screen.

• The air purifier has malfunctions. Visit www.philips.com/

support or call 1-866-309-8817 for assistance.

La page charge ...

Philips AC1214/40 Manuel utilisateur

Ce manuel convient également à

Philips AC1214/40 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents