Pelican ANTIGUA 106 Le manuel du propriétaire

Taper
Le manuel du propriétaire
INFLATABLE SUP
OWNER’S MANUEL
MANUEL DE L’UTILISATEUR
English / p.2
Français / p.18
IP1048-1
IP1048-1
INFLATABLE SUP
OWNER’S MANUAL
PRINTED IN CHINA
3
4
4
4
4
5
5
5
6
7
Your SUP
Getting Started
Materials / Manufacturing
Transportation
Pre-Launch Checklist
Launching Procedure
Mooring/Docking
Basic SUP Principles
Safety Precautions
Care and Maintenance
Storage
Inflation
Deflation
Leash Installation
Fin Installation
Repair Kit
Limited Warranty
Manufacturer’s Declaration of Origin
Warranty Registration Card
Outfitting and Features
INDEX
1000 Place Paul-Kane, Laval
Quebec, Canada H7C 2T2
1.800.463.6960
PELICANSPORT.COM
IMPORTANT INFORMATION
Model
Date of Purchase
Dealer Name
Registration No.
Province/State
Model No.
Serial No. (ZEP)
HOW TO LOCATE THE SERIAL NUMBER
The serial number is located on the side of the tail, in the right-hand of the
board. The number starts with ZEP and is twelve (12) characters digits long.
Example: ZEP12345A678
WELCOME!
Thank you for choosing a Pelican SUP. This SUP was built in accordance
with strict quality standards and with the benefit of near 50 years of
expertise. We hope you thoroughly enjoy this product. Please take the time
to read the content in this manual in order to optimize your satisfaction of
this product. We believe that a Pelican SUP offers incomparable value.
We wish you years of enjoyment and rewarding experiences with this
Pelican SUP.
Antoine & Christian Elie
2
8
8
9
9
10
11
12
14
15
16
It is important for EVERY person to read
WARNINGS, CAUTIONS and NOTES carefully
in this manual.
WARNING
A WARNING indicates a hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION
A CAUTION indicates a hazardous situation which, if
not avoided, could result in minor or moderate injury.
NOTE
A NOTE provides information and sometimes suggests
how to make better use of your SUP.
YOUR NEW INFLATABLE SUP
Take the time to familiarize yourself with the various
components of your SUP.
ACCESSORIES INCLUDED
WITH CERTAIN MODELS
MODEL SHOWN: ANTIGUA 100 / ACCESSORIES INCLUDED MAY VARY PER MODEL
PADDLE BOARD
AIR VALVE
CARRYING HANDLE
ELASTIC BUNGEE CORD
CARRYING HANDLE
ANTI-SLIP CUSHIONED
DECK PAD FOR
SECURE FOOTING
FIN BOX
FIN
LEASH RING
LEASH PUMPCARRY BAG
3
4
GETTING STARTED
Please read all the instructions in this owners manual. Keep this manual in
a safe place for future reference if necessary. The manual consists of:
1. Important information
There is a space provided at the beginning of the manual to record important
information about your SUP (page 2). This information will come in handy if
you need to contact our customer service department.
2. Warranty registration card
As outlined in the warranty section (page 12), you can register your warranty
online at our website (www.pelicansport.com) or by mail by filling out and
returning the registration card. You can find the registration card at the end
of this manual (page 15).
3. Manufacturers Declaration of Origin
Certain governments require a Manufacturers Declaration of Origin to complete
the registration. The declaration is located at the end of this manual (page 14).
MATERIALS/MANUFACTURING
Pelican International Inc. inflatable is built of outer and inside PVC with drop stitch
polyester yarns.
TRANSPORTATION
Inflatable SUPs are designed to compact in the included bag for
convenient travel.
By hand:
Carry the board by using the handle located in the center or at the top of
the board.
If necessary, use a device to aid in the transport.
By vehicle:
Do not transport an inflated SUP on top of a vehicle
Keep away from any sharp objects.
Keep away from any heat producing items.
Completely dry your inflatable SUP before rolling for packing. Excess moisture
may cause mildew and/or mold damage.
PRE-LAUNCH CHECKLIST
Always wear a proper personal flotation device (PFD).
Always have an emergency safety kit on hand that is required by applicable law
(whistle, etc.)
Verify that the hardware used to attach the SUP during transport has been
removed.
Make sure the air valve is securely in place and properly fastened.
Make sure the length of your paddle is adjusted according to your size (see details
described in “Basic SUP Principles”).
LAUNCHING PROCEDURE
WARNING
Do not stand up on the SUP if there are objects nearby that present a falling
hazard (dock, rocks, etc.).
Remain on your knees and use the paddle to move further away before standing
up. You can return to a kneeling position at any time if a hazardous situation
presents itself.
Keep your paddle in hand at all times.
Make sure the water is deep enough so that the fin will not scrape the bottom.
Start by kneeling in the center and pressing your hands on both sides of the
board for added stability.
Stand up one foot at a time (use the paddle for balance).
Your feet should be positioned shoulder-width in the middle of the board,
one foot on each-side of the carry handle.
When you feel comfortable, start paddling forward.
MOORING/DOCKING
If you want to moor your SUP to a dock, make sure that:
It is away from rocks or sharp objects.
The water is deep enough to avoid damaging the board.
5
BASIC SUP PRINCIPLES
Learn and practice basic skills on a calm lake. Start slowly in open areas with
few people around. Take your SUP through rougher water only when you are
confident about your abilities.
For maximum comfort, make sure you have a paddle with a length that fits
your size. In general, you should add 8 to 10 inches to your height to determine
the length of the paddle. For example, if you are 5 feet 10 inches (70 inches)
tall, your paddle should be 78-80 inches long.
You should stand in the center of the board when you paddle. In calm water,
your feet should be positioned shoulder-width apart and pointing forward. In
waves or rougher water, you should move a foot towards the back of the board
and assume a surfing position. Practice moving your feet on the board and
changing positions to improve your balance.
The best way to make a quick turn with your board is to move your weight
back. The nose of the board will be out of the water and it will be much easier
to turn.
If you paddle on a large body of water, like a lake or ocean, be sure to use a
leash that connects you to your board. If you fall, your board could be pushed
away from you, leaving you alone in the water.
If you paddle on a river with a strong current, do not use an ankle leash. If
you fall, your board could drag you under the water and carry you down with
the current. Or the leash could get caught on something in the water (rocks,
branches, tree trunks, etc.) and cause you to fall off your board.
Be careful in windy conditions. Your body is completely exposed when standing
up and strong winds can greatly affect your movements and push you off
course. Adopting a kneeling or sitting position when faced with such conditions
can prevent the wind from affecting your course.
Never leave your board if you do not have a leash, even if you lose your
paddle. You can always paddle with your hands, which is an easier option than
trying to swim back. As well, if the wind picks up and you are not on your
board, it can float away faster than you can swim to retrieve it. This is why a
leash is so important.
SAFETY PRECAUTIONS
Read the information outlined below before using your SUP. Failure to follow
these warnings and precautions could result in serious injury or death. Paddle
sports can be dangerous and physically demanding.
Every person using an SUP built or sold by Pelican is personally responsible for
determining if their abilities match the encountered conditions and should use
their best judgment as to the time and place to use the SUP. All individuals
who use a Pelican SUP assume all risks and accept all responsibility for any
damage or injury, including death, which may result from using or handling a
SUP. It is strongly recommended you take a course offered by an experienced
instructor on proper paddling techniques, boating security and first aid before
practicing this sport.
1. Weather conditions and water levels
WARNING
Check weather conditions and water levels before heading out.
Never go out in conditions that could affect your ability to steer the board,
including severe wind, heavy rain, thunderstorms, flooding, choppy water or
strong currents. If you’re already on the water, head to shore.
2. Personal flotation device (PFD)
WARNING
Always wear a U.S. Coast Guard and/or government approved life jacket (PFD).
Before you start to paddle, read the manufacturer’s documentation about the
lifejacket and familiarize yourself with how to properly wear it.
3. Alcohol and drugs
WARNING
Never use or consume alcohol, drugs or any other mind altering substance
that may affect your coordination, judgement or ability to safely and securely
operate your SUP.
4. Sound-signalling device
CAUTION
Always have a sound-signalling device with you.
The Coast Guard (or other government bodies) require that boaters are equipped to
alert other vessels to their presence. If possible, attach a device to your lifejacket.
5. Ability
WARNING
Do not exceed your ability.
Consult your physician before beginning your SUP training. Realistically assess your
physical stamina to determine how far and how long you can paddle or swim.
6. Traction on the SUP
CAUTION
The board material is extremely slippery when wet.
Stay within the traction zone to avoid slipping. We recommend you wear non-
slip shoes for more traction. This will also protect your feet when launching and
if you walk on rocks.
7. Hypothermia
WARNING
Dress appropriately for weather conditions and, if necessary, wear a wetsuit.
Boating accidents in cold water are very dangerous. Hypothermia, the loss of
body heat due to immersion in cold water, can be fatal. Survival time can be as
little as 15 to 20 minutes in cold water.
6
8. Be accompanied
CAUTION
Never paddle alone.
It is always preferable to be accompanied on your outing in case of an
emergency or accident. You should know the level of physical ability of those
paddling with you and relevant medical conditions associated with each of them.
Always tell someone your plans, including your destination, how long you’ll be
gone, and how many people you’ll be with.
9. Always familiarize yourself with the body of water you intend
to navigate
WARNING
Scout unfamiliar water.
Find out what hours boating is permitted, if there are any known hazardous
conditions and where to get help quickly if there is an emergency or accident.
Check tidal changes and currents specific to your location. If you decide to go
down rapids, you need to scout in advance and, if necessary, portage your SUP
to bypass unfamiliar or dangerous zones.
10. Regulations and laws
CAUTION
Always follow Coast Guard regulations and/or boating and safety laws,
regulations and orders of various levels of government (including regional).
Consult the Coast Guard and/or authorities in various levels of government about
the proper handling of a boat and required and/or recommended equipment
such as lighting and sound alarms.
11. Vent cap
CAUTION
Make sure the vent cap of the SUP is firmly in place before putting it in
the water.
12. Self protection
WARNING
Wear appropriate safety gear.
This product is not a personal flotation device. This SUP does not contain
flotation material and may sink if deflated.
If you choose to go down rapids, you are voluntarily risking serious injury
or death. You must take the appropriate safety precautions, inspect your
equipment thoroughly, and wear appropriate safety gear. You should always
wear a lifejacket, a helmet and we strongly advise you to wear protection on
your arms, legs, etc. It is your responsibility to have the proper equipment
and familiarize yourself with the body of water before heading out.
WARNING
Never allow minors to use this board without adult supervision.
Never tow behind a boat.
Never use as a lifesaving device.
Never exceed the boat’s maximum weight.
CARE AND MAINTENANCE
The best way to clean your SUP is to rinse sand and saltwater deposits
from your board after each use with fresh water. Maintain the high pressure
pump regularly. Please make sure that the pump is fully lubricated with oil.
To lubricate, open the top and spread a thin layer of oil or grease on the
gasket and tube. Regularly clear the air filter located inside the top.
7
Final inflation mode: Turn valve toward single action.
1. Connect air hose to the OUT valve of the pump.
2. Open the valve cap located on the board.
3. Connect air hose to the air valve on the board and turn 90° to
secure connection.
4. Use the quick inflation mode to start inflating the board and
finish with the final inflation mode until 12-15 psi is reached.
5. Disconnect air hose from the air valve on the board.
6. Close valve cap.
STORAGE
Keep your board in a well-ventilated, shaded area when not in use.
Direct sunlight can damage a board left exposed for a period of time.
Heat may cause the air inside to expand beyond the pressure limits.
Keep your board in an area with good air flow and circulation.
Leaving your board in a vehicle during the day elevates the risk for heat
related damages.
Improper inflation or deflation may result in damaging your SUP
The optimal inflation pressure is between 12-15 PSI.
Do not store your board in a board bag for extended periods of time. Board bags
are intended for transportation, not for full time storage. Prolonged storage of a
wet board in a wet bag will lead to the possibility of mould and osmotic blisters.
Board bags also collect heat and can potentially overheat your board.
INFLATION
The pump can be used in double-action mode during the inflation phase.
Quick inflation mode: Turn valve toward double action.
88
LEASH INSTALLATION
1. Pull leash loop through the ring located
at the tail of the board
2. Pull knot through loop and pull tight
3. Open hook-and-loop fastener cuff
and attach leash to the leash loop
DEFLATION
1. Connect air hose to the IN valve of the pump.
2. Open the valve cap located on the board.
3. Connect air hose to the air valve on the board and turn 90° to
secure connection.
4. Depress using the pump.
5. Disconnect air hose from the air valve on the board.
6. Depress coloured valve pin and turn clockwise to lock the pin in
the ’’DOWN’’ position.
7. Beginning at the nose of the board, tightly roll up the SUP.
8. Close valve cap.
9
FIN INSTALLATION
Keep your fin in good condition by removing it after each use. Damage to the fin
incurred while attached to the paddle board may result in severe damage to the
fin box and the watertight. Attach firmly before you go riding.
INSTALL ATION
1. Unscrew the bolt and the square nut from the fin
2. Insert the nut into the SUP’s groove and push foward.
3. Insert the fin into the SUP’s groove and align the bolt’s hole with
the nut previously installed. Screw lightly and push backward.
4. Place the bolt and screw firmly.
REMOVAL
Reverse steps, 4 through 1.
810
REPAIR KIT
WARNING: Wear latex gloves. Avoid contact with skin & eyes. Avoid
breathing cement vapours.
1. Prepare the following items:
Latex gloves - Not included
Rubbing Alcohol - Not included
Clean cloth - Not included
Cement applicator - Not included
Repair kit content: 2x patch, 1x valve handle
2. Deflate paddle board.
3. If the valve needs to be retighten or replaced, use the valve handle
provided with the repair kit.
4. Clean the surface around the leak as well as the matte side of the
PVC/Polyester patch with rubbing alcohol.
5. Apply cement carefully and evenly to the paddle board surface and
the matte side of the patch surface.
6. Allow cement on both the board and the patch to dry. Once dry,
reapply a very thin layer of cement around the perimeter
of the patch.
7. Once the cement on both the board and the patch becomes
tack-free, apply the patch to board and firmly work out any
trapped air bubbles.
8. Allow 8 hours before inflating paddle board.
11
LIMITED WARRANTY
Pelican International Inc. offers a 1-year limited warranty
against defects in materials and workmanship from the
date of purchase. If the product does not conform to the
warranty, Pelican International Inc., at its discretion will issue
a new, like new or similar model product, excluding any
shipping charges. Warranty extends to original purchaser
only and is non-transferable. Sales receipt and original
packaging materials are required.
BASE GUARANTEE
Pelican International Inc. makes every effort to produce boards built of superior
materials and accordance with stringent quality standards. Because of the
nature of surfing and paddle boarding, we cannot guarantee the performance of
any board or shape for individual riders and varying levels of skills and abilities.
Furthermore, we cannot guarantee against damage or breakage and cannot
protect or guarantee against circumstances outside of our control. In the event
of a new board being removed from a box and not in good condition please
contact Pelican International Inc. for resolution. You will be asked for a copy of
your sales receipt and photos of the damage in question, as well as the original
packaging material to verify if damage was due to shipping. If it is deemed a
manufacturing or material flaw, we will issue an RMA number. This number
along with the damaged product will need to be returned to our warehouse
at customer’s expense. Upon physical review, Pelican International Inc. will
make its final determination as to the nature of the damage or flaw and issue
a replacement product (model depends on availability). Shipping will be the
responsibility of the customer. We are not responsible for damage or defects
once the board has been used. Damage is defined as impact with any object or
material, damage due to dropping, loading, unloading, or transport, alterations
or modifications, repairs, natural disasters, fires, temperatures below 4.4°C
(40°F), or above 43°C (110°F), any further use of a board once a claim has been
reported, transport or storage of a board with a closed air valve, use of a board
in the water with a loose or removed air valve, failure to clean and service air
vent valve, storage of a board in extremely hot or humid conditions including a
wet or damp board bag.
12
THIS WARRANTY DOES NOT COVER
SUPs used for rental or other commercial use
Products that have been damaged by negligence, misuse or accident, or wear
due to owner’s failure to provide reasonable and necessary maintenance
Products which have been modified or repaired by unauthorized persons
Change in appearance of SUP due to wear, exposure or any other
environmental condition
During the warranty period, Pelican International Inc. is obliged only to repair or
replace, at its discretion, the above mentioned parts, at either its manufacturing
plant, or at an authorized dealer store or service center, as decided by Pelican
International Inc.
Transportation costs back to the appointed place of repair or replacement are
at the expense of the consumer. Pelican International Inc. is not responsible for
any damages incurred in transport, for storing or transportation fees, nor for
inconvenience or loss of time or money while repairs are being made.
Any return or repair of boats must be accompanied by an authorization
number obtained by your dealer and which can only be issued by calling
Pelican International Inc. Customer Service Department between 9 am and
5 pm Eastern Standard Time at 1-800-463-6960. The return of any Pelican
International Inc. boat will not be accepted by Pelican International Inc. without
this authorization number.
This warranty is the sole and exclusive warranty by Pelican International Inc. in
connection with its above mentioned boats and Pelican International Inc. makes
no warranties or representations, expressed or implied (including warranties
of merchantability and of fitness for a particular purpose) in such connection
except as specifically set in this warranty.
All incidental and / or consequential damages are excluded from this warranty.
Implied warranties are limited to the life of this warranty. Some states do not
allow limitations on how long an implied warranty lasts or the exclusion or
limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you. This warranty gives you special legal rights,
and you may also have other legal rights which may vary from state to state.
13
The manufacturer further certifies that this was the first transfer of said new boat
in ordinary trade and commerce, and that all information given herein is true and
accurate to the best of his knowledge.
Name of manufacturer: Pelican International Inc., 1000 Place Paul-Kane,
Laval (Quebec) Canada H7C 2T2
Authorized by:
14
SUP DESCRIPTION
Serial number: ZEP
Model year:
Model name:
Length:
MANUFACTURER’S DECLARATION OF ORIGIN
Sold in the State / Province of
The undersigned manufacturer hereby certifies that the new SUP described
below, the property of said manufacturer, has been transferred on this
day of ,
on invoice no.:
to:
Dealer name
Address
City
State / Province
Zip / Postal Code
Pierre Arsenault, President
REGISTER YOUR PRODUCT
IMPORTANT INFORMATION
Please register your product within thirty (30) days of purchase to validate the warranty
REGISTER ONLINE (highly recommended, only takes 3 min)
DATE OF PURCHASE: SERIAL NUMBER:
DEALER / STORE NAME: MODEL:
MR. MRS. MS.
FIRST NAME: LAST NAME:
STREET ADDRESS:
ZIP / POSTAL CODE: COUNTRY: PHONE:
E-MAIL:
M D Y YM D Y Y
Z E P
www.pelicansport.com/register
Customer Service, Pelican International Inc.
1000 Place Paul-Kane
Laval QC H7C 2T2 Canada
RETURN THE FOLLOWING FORM TO
OR
15
OUTFITTING AND FEATURES
Learn more about some of the key features of your SUP.
ANTI-SLIP DECK PAD
This traction pad is cushioned to provide
comfort as well as secure footing.
REMOVABLE 10’’ FIN
This rigid fin promotes straight tracking and navigation
through the water. It needs to be removed for travel
and storage.
CENTER GRAB HANDLE
The carry handle is used for transportation by hand.
ELASTIC BUNGEE CORD
The bungee is used to secure your personal objects.
AIR VALVE
The air valve is used for inflation and deflation.
LEASH RING
The leash ring is used to insert your leash.
16
IP1048-1
MANUEL DE L’UTILISATEUR
PLANCHE À PAGAIE GONFLABLE
IMPRIMÉ EN CHINE
3
4
4
4
4
5
5
6
7
8
Votre planche
Pour un bon départ
Matériau
Transpor t
Liste des vérifications
Procédure de mise à l’eau
Principes de base pour les planches
Mesure de sécurité
Entretien
Entreposage
Gonflage
Dégonflage
Installation de la laisse
Installation de l’aileron
Trousse de réparation
Garantie
Déclaration d’origine
Description de l’embarcation
Carte d’enregistrement
Équipement et options
INDEX
1000 Place Paul-Kane, Laval
Quebec, Canada H7C 2T2
1.800.463.6960
PELICANSPORT.COM
RENSEIGNEMENTS IMPORTANTS
Modèle
Date d’achat
Nom du marchand
N° d’enregistrement
Province / État
N° de modèle
N° de série ZEP
COMMENT LOCALISER LE NUMÉRO DE SÉRIE
DE VOTRE EMBARCATION
Le numéro de série se trouve à la queue, sur le côté droit de la planche. Le
numéro commence par ZEP et contient douze (12) caractères.
Exemple : ZEP12345A678
BIENVENUE!
Merci d’avoir choisi une planche Pelican. Cette planche a été fabriquée
selon des normes rigoureuses de qualité et selon notre savoir-faire
perfectionné depuis plus de 40 ans. Nous espérons que votre expérience
avec le produit sera des plus satisfaisantes. Prenez le temps de vous
familiariser avec le contenu de ce manuel afin d’optimiser votre satisfaction
du produit. Nous croyons que les planches Pelican offrent une valeur
sans pareille.
Nous espérons que vous en profiterez pleinement.
Antoine & Christian Elie
2
8
9
9
10
11
12
14
14
15
16
Il est important que CHAQUE personne lise
attentivement les AVERTISSEMENTS, les
attentions et les AVIS de ce manuel.
AVERTISSEMENT
Un AVERTISSEMENT indique une situation dangereuse
qui, si elle n’est pas évitée, peut entraîner un décès
ou une blessure grave.
ATTENTION
Une ATTENTION indique une situation dangereuse
qui, si elle n’est pas évitée, peut entraîner une
blessure légère ou moyenne.
AVIS
Un AVIS donne de l’information et quelquefois suggère
une meilleure façon d’utiliser votre planche.
VOTRE PLANCHE
Prenez le temps de vous familiariser avec les
différentes composantes de votre planche.
ACCESSOIRES INCLUS AVEC
CERTAINS MODÈLES
MODÈLE ILLUSTRÉ: ANTIGUA 100 / LES ACCESSOIRES INCLUS PEUVENT VARIER SELON LE MODÈLE
PLANCHE À PAGAIE
LAISSE POMPE
BOUCHON D’AÉRATION
SAC DE TRANSPORT
POIGNÉE DE TRANSPORT
CORDAGE ÉLASTIQUE
POIGNÉE DE TRANSPORT
TAPIS ANTIDÉRAPANT
BOÎTIER POUR AILERON
AILERON
ANCRAGE POUR LA LAISSE
3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33

Pelican ANTIGUA 106 Le manuel du propriétaire

Taper
Le manuel du propriétaire

dans d''autres langues