Samsung WF435ATGJWR Manuel utilisateur

Washing Machine

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service or accessory

parts, please register your product at or contact

www.samsung.com/register

1-800-SAMSUNG (726-7864)

WF435A*GJ**

This manual is made with 100% recycled paper.

WF435A-03159B-02_EN_20120829.indd 1WF435A-03159B-02_EN_20120829.indd 1 2012-08-31  12:32:532012-08-31  12:32:53

2_ key features of your new Smart PowerFoam™ washer

key features of your new

Smart PowerFoam™ washer

1. VRT PLUS™ (Vibration Reduction Technology)

This Samsung washer minimizies noise and vibration with dual 3D vibration sensors and

smart control technology, ensuring quiet operation.

2. The Largest Capacity

Samsung’s extra-large capacity laundry machine can wash a full set of your bedding, a

kingsize comforter, or up to 32 bath towels in a single load. Since you don’t have to do as

many loads, you save time, money, water, and energy.

3. PowerFoam™

Samsung’s effective PowerForm delivers improved cleanliness with advanced fabric care.

PowerFoam allows detergent to distribute evenly and penetrate fabrics faster and deeper.

4. PureCycle™(Tub Cleaning cycle)

Clean your drum with one button! This Pure Cycle is specially designed to remove

detergent residue & dirt bulidup in the tub, diaphragm and door glass without the need for

special chemical detergents.

5. SpeedSpray™

Samsung’s new Speed Spray technology saves you up to 25%* more time when doing

laundry by shortening wash times while still keeping all segments of the washing process

and getting your clothes clean.

*Based on 8 pounds loads, Normal cycle (under Normal Soil level without any options),

on previous and existing 4.3 cu.ft. Samsung front loading washers released until 2011

without Speed Spray.

**Speed Spray performs in Normal, Bedding PLUS, Deep Steam, Stain Away and

Eco Cold cycle and the saving time may vary by cycles and various load and option

compositions.

6. Deep steam

The Deep Steam feature boosts cleaning performance and loosens grime and dirt, thus

providing superior cleaning results.

7. Smart Care

Samsung’s Smart Care, an automatic error-monitoring system, detects and diagnoses

problems at an early stage and provides a quick and easy solution. With the innovative

Smart Control technology, you can also be alerted when the problem occurs via your smart

phones.

8. Stylish design

The stylish design of this washer blends well with your environment.

9. Digital Display & Center jog dial

The Jog dial enables you to select cycles in both directions with ease, and the display is

easy to use and understand.

WF435A-03159B-02_EN_20120829.indd Sec9:2WF435A-03159B-02_EN_20120829.indd Sec9:2 2012-08-31  12:32:582012-08-31  12:32:58

key features of your new Smart PowerFoam™ washer _3

10. DD Motor

The power to handle anything! Our direct-drive inverter motor delivers power right to the

washer tub from a variable speed, reversible motor. A beltless direct-drive motor generates

a higher spin speed of 1,300rpm for more effective, quiter operation. The washer also has

fewer moving parts, meaning fewer repairs.

11. Sanitize

When selecting this cycle, the water heats to an extra high temperature to remove 99.9%

of certain bacteria typically found on clothing, bedding, or towels. This certification is

conducted by NSF International, an independent third-party testing and certification

organization.

Please check the garment care label to avoid garment damage. Only sanitizing cycles have

been designed to meet the requirements of this protocol for sanitization efficacy.

12. Pedestal with Storage Drawers (Model No :

WE357*

)

An optional 15” pedestal is available to raise the washer for easier loading and unloading.

It also offers a built-in storage drawer that can hold a 100 oz. bottle of detergent

13. Stacking (Model No : SK-5A/XAA)

Samsung washers and dryers can be stacked to maximize usable space. An optional

stacking kit is available for purchase from your Samsung retailer.

NSF Protocol P172

Sanitization Performance of Residential and

Commercial, Family-Sized Clothes Washers

WF435A-03159B-02_EN_20120829.indd Sec9:3WF435A-03159B-02_EN_20120829.indd Sec9:3 2012-08-31  12:32:582012-08-31  12:32:58

4_ safety information

safety information

Congratulations on your new Samsung washer. This manual contains important

information on the installation, use and care of your appliance. Please take time to

read this manual to take full advantage of your washer’s many beneﬁ ts and features.

WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS

The Warnings and Important Safety Instructions in this manual do not cover all possible conditions and

situations that may occur. It is your responsibility to use common sense, caution, and care when installing,

maintaining and operating your washer.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

What the icons and signs in this user manual mean:

WARNING

Hazards or unsafe practices that may result in severe personal injury

or death.

To reduce the risk of ﬁ re, explosion, electric shock, or personal injury

when using your washer, follow these basic safety precautions:

CAUTION

Hazards or unsafe practices that may result in minor personal injury

or property damage.

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions explicitly.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Note

These warning signs are here to prevent injury to you and others.

Please follow them explicitly.

After reading this section, keep it in a safe place for future reference.

SAVE THESE INSTRUCTIONS

WF435A-03159B-02_EN_20120829.indd Sec1:4WF435A-03159B-02_EN_20120829.indd Sec1:4 2012-08-31  12:32:582012-08-31  12:32:58

safety information _5

SAVE THESE INSTRUCTIONS

WARNING

To reduce the risk of ﬁ re, electric shock, or injury to persons when using your appliance, follow

basic precautions, including the following:

1. Read all instructions before using the appliance.

2. Do not wash or dry articles that have been previously cleaned in, washed in, soaked in, or

spotted with gasoline, dry-cleaning solvents, other ﬂ ammable or explosive substances as

they give o vapors that could ignite or explode.

3. Do not allow children to play on or in the appliance. Close supervision of children is

necessary when the appliance is used near children.

4. Before the appliance is removed from service or discarded, remove the door to the washing

or drying compartment.

5. Do not reach into the appliance if the drum is moving.

6. Do not install or store this appliance where it will be exposed to the weather.

7. Do not tamper with controls.

8. Do not repair or replace any part of the appliance or attempt any servicing unless speciﬁ cally

recommended in the user-maintenance instructions or in published user-repair instructions

that you understand and have the skills to carry out.

9. Do not add gasoline, dry-cleaning solvents, or other ﬂ ammable or explosive substances to

the wash water. These substances give o vapors that could ignite or explode.

10. Under certain conditions, hydrogen gas may be produced in a hot water system that has not

been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system

has not been used for such a period, before using a washer or combination washer-dryer,

turn on all hot water faucets and let the water ﬂ ow from each for several minutes. This will

release any accumulated hydrogen gas. As the gas is ﬂ ammable, do not smoke or use an

open ﬂ ame during this time.

State of California Proposition 65 Warnings:

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of

California to publish a list of substances known to the State of California to cause cancer,

birth defects, or other reproductive harm, and requires businesses to warn of potential

exposure to such substances.

This product contains a chemical known to the State of California to cause cancer, birth

defects, or other reproductive harm. This appliance can cause low-level exposure to some

of the substances listed, including benzene, formaldehyde, and carbon monoxide.

WARNING

WF435A-03159B-02_EN_20120829.indd Sec1:5WF435A-03159B-02_EN_20120829.indd Sec1:5 2012-08-31  12:32:582012-08-31  12:32:58

6_ safety information

safety information

SAVE THESE INSTRUCTIONS

CRITICAL INSTALLATION WARNINGS

Plug the power cord into an AC 120 V / 60 Hz / 15 A wall socket or higher and use the

socket for this appliance only. In addition, do not use an extension cord.

- Sharing a wall socket with other appliances, using a power strip, or using an extension

cord may result in electric shock or ﬁ re.

- Do not use an electric transformer. It may result in electric shock or ﬁ re.

- Ensure that the voltage, frequency, and amperage provided at the wall socket match the

power speciﬁ cations of the product.

The installation of this appliance must be performed by a qualiﬁ ed technician or service

company.

- Failing to do so may result in electric shock, ﬁ re, an explosion, problems with the

product, or injury.

Remove all foreign substances such as dust or water from the power plug terminals and

contact points using a dry cloth on a regular basis.

- Unplug the power plug and clean it with a dry cloth.

- Failing to do so may result in electric shock or ﬁ re.

Plug the power plug into the wall socket in the right direction so that the cord runs towards

the ﬂ oor.

- If you plug the power plug into the socket in the opposite direction, the electric wires

within the cable may be damaged and this may result in electric shock or ﬁ re.

This appliance must be properly grounded.

Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

- Improper grounding may result in electric shock, ﬁ re, an explosion, or problems with the

product.

- Never plug the power cord into a socket that is not grounded correctly and make sure

that it is in accordance with local and national codes.

Do not install this appliance near a heater or inﬂ ammable material.

Do not install this appliance in a humid, oily or dusty location, or in a location exposed to

direct sunlight and water (rain drops).

Do not install this appliance in a location where gas may leak.

- This may result in electric shock or ﬁ re.

Plug the power plug into the wall socket ﬁ rmly. Do not use a damaged power plug,

damaged power cord, or loose wall socket.

- This may result in electric shock or ﬁ re.

Do not pull or excessively bend the power cord.

Do not twist or tie the power cord.

Do not hook the power cord over a metal object, place a heavy object on the power cord,

insert the power cord between objects, or push the power cord into the space behind the

appliance.

- This may result in electric shock or ﬁ re.

WARNING

WF435A-03159B-02_EN_20120829.indd Sec1:6WF435A-03159B-02_EN_20120829.indd Sec1:6 2012-08-31  12:32:582012-08-31  12:32:58

safety information _7

SAVE THESE INSTRUCTIONS

Do not pull the power cord when unplugging the power plug.

- Unplug the power plug by holding the plug.

- Failing to do so may result in electric shock or ﬁ re.

If the power plug or power cord is damaged, contact your nearest service center.

INSTALLATION CAUTIONS

Position the appliance so that the power plug is easily accessible.

- Failing to do so may result in electric shock or ﬁ re due to electric leakage.

Install your appliance on a level and hard ﬂ oor that can support its weight.

- Failing to do so may result in abnormal vibrations, noise, or problems with the product.

Unplug the power plug when the appliance is not being used for long periods of time or

during a thunder/lightning storm.

- Failing to do so may result in electric shock or ﬁ re.

CRITICAL USAGE WARNINGS

If the appliance is ﬂ ooded, cut the power immediately and contact your nearest service

center.

If the appliance emits a strange noise, a burning smell, or smoke,, unplug the power plug

immediately and contact your nearest service center.

- Failing to do so may result in electric shock or ﬁ re.

In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without

touching the power plug. Do not touch the appliance or power cord.

- Do not use a ventilating fan.

- A spark may result in an explosion or ﬁ re.

Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or

other ﬂ ammable or explosive substances.

- This may result in electric shock, ﬁ re or an explosion.

Do not open the washer door by force while the washer is operating (high-temperature

washing/drying/spinning).

- Water ﬂ owing out of the washer may result in burns or cause the ﬂ oor to be slippery.

This may result in injury.

- Opening the door by force may result in damage to the product or personal injury.

Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the

washer before using it.

Do not insert your hand under the washer.

- This may result in injury.

CAUTION

WARNING

WF435A-03159B-02_EN_20120829.indd Sec1:7WF435A-03159B-02_EN_20120829.indd Sec1:7 2012-08-31  12:32:582012-08-31  12:32:58

8_ safety information

safety information

SAVE THESE INSTRUCTIONS

Do not touch the power plug with wet hands.

- This may result in electric shock.

Do not turn the appliance o by unplugging the power plug while an operation is in

progress.

- Plugging the power plug into the wall socket again may cause a spark and result in

electric shock or ﬁ re.

Keep all packaging materials well out of the reach of children, as packaging materials can

be dangerous to children.

- If a child places a bag over its head, it may result in su ocation.

Do not let children or inﬁ rm persons use this washer unsupervised.

- Failing to do so may result in electric shock, burns or injury.

Do not insert your hand or a metal object under the washer while it is operating.

- This may result in injury.

Make sure the detergent drawer is closed before you put laundry into the washer or remove

laundry from the washer.

- If the detergent drawer is open, you could strike the drawer with your head and injure

yourself.

Do not attempt to repair, disassemble, or modify the appliance yourself.

- Do not use any fuse (such as cooper, steel wire, etc.) other than the standard fuse.

- If you need to repair or reinstall the appliance, contact your nearest service center.

- Failing to do so may result in electric shock, ﬁ re, problems with the product, or injury.

If water has enters the appliance anywhere but the drum, unplug the power plug and

contact your nearest service center.

- Failing to do so may result in electric shock or ﬁ re.

When the water supply hose comes loose from the faucet and ﬂ oods the appliance, unplug

the power plug.

- Failing to do so may result in electric shock or ﬁ re.

If any foreign substance enters the appliance, unplug the power plug and contact you

nearest service center.

- Failing to do so my result in electric shock or ﬁ re.

USAGE CAUTIONS

If the the washer is contaminated by a foreign substance such as detergent, dirt, food

waste, etc., unplug the power plug and clean the washer using a damp, soft cloth.

- Failing to do so may result in discoloration, deformation, damage or rust.

If struck hard, the front glass can break. Take care when using the washer.

- If the glass is broken, it may result in injury.

CAUTION

WF435A-03159B-02_EN_20120829.indd Sec1:8WF435A-03159B-02_EN_20120829.indd Sec1:8 2012-08-31  12:32:582012-08-31  12:32:58

safety information _9

SAVE THESE INSTRUCTIONS

After a water supply failure or when reconnecting the water supply hose, open the faucet

slowly.

Open the faucet slowly after a long period of non-use.

- The air pressure in the water supply hose or the water pipe may result in damage to a

part or in water leakage.

If a drain error occurs during an operation, check if there is a drainage problem.

- If the washer is used when it is ﬂ ooded because of a drainage problem,, it may result in

electric shock or ﬁ re due to electric leakage.

Insert the laundry into the washer completely so that laundry does not get caught in the

door.

- If laundry gets caught in the door, it may result in damage to the laundry or the washer,

or result in water leakage.

Ensure that the faucet is turned o when the washer is not being used.

- Ensure that the screw on the water supply hose connector is ﬁ rmly connected to the

faucet and properly tightened.

- Failing to do so may result in property damage or injury.

Take care that the Rubber Seal and the Front Door Glass are not contaminated by a foreign

substance (e.g. waste, thread, hair, etc.)

- If a foreign substance is caught in the door or the door is not completely closed, it may

cause water leakage.

Open the faucet and check if the water supply hose connector is ﬁ rmly tightened and that

there is no water leaking before using the product.

- If the water supply hose connectors are loose, it may result in water leakage.

The product you have purchased is designed for domestic use only.

The use for business purposes qualiﬁ es as product misuse. In this case, the product will

not be covered by the standard warranty provided by Samsung and no responsibility can

be attributed to Samsung for malfunctions or damages resulting from such misuse.

If the wash is not performed and the laundry is left for a period of time after adding

detergent or applying stain remover or pre-treatment onto the laundry, the laundry may be

discolored.

Select the recommended cycle and temperature on the basis of the laundry items, sort the

laundry by color on the basis of its colorfastness and select the appropriate cycle.

Make sure that foreign objects such as pins, buttons and coins are removed from clothing

items when adding laundry into the washer. Wash dirty laundry separately from relatively

clean items and wash fragile items separately from tougher textiles.

If an item is stained, wash it as fast as possible. Use stain remover or detergent only after

testing the colorfastness of the item by applying a small quantity to an inside seam.

WF435A-03159B-02_EN_20120829.indd Sec1:9WF435A-03159B-02_EN_20120829.indd Sec1:9 2012-08-31  12:32:582012-08-31  12:32:58

10_ safety information

safety information

SAVE THESE INSTRUCTIONS

Do not stand on top of the appliance or place objects (such as laundry, lighted candles,

lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.

- This may result in electric shock, ﬁ re, problems with the product, or injury.

Do not operate the appliance with wet hands.

- This may result in electric shock.

Do not spray volatile material such as insecticide onto the surface of the appliance.

- As well as being harmful to humans, it may also result in electric shock, ﬁ re or problems

with the product.

Do not place an object that generates a electromagnetic ﬁ eld near the washer.

- This may result in injury due to a malfunction.

Since the water drained during a high-temperature wash or drying cycle is hot, do not touch

the water.

- This may result in burns or injury.

Do not wash, spin or dry water-proof seats, mats or clothing (*).

- Do not wash thick, hard mats even if the washer mark is on the care label.

- This may result in injury or damage to the washer, walls, ﬂ oor or clothing due to

abnormal vibrations.

* Woolen bedding, rain covers, ﬁ shing vests, ski pants, sleeping bags, diaper covers,

sweat suits, and bicycle, motor cycle, car covers, etc.

Do not operate the washer when the detergent box is removed.

- This may result in electric shock or injury due to water leakage.

Do not touch the inside of the tub during or just after drying as it is hot.

- This may result in burns.

Do not insert your hand into the detergent dispenser after opening it.

- This may result in injury as your hand may be caught.

Do not place any non-laundry objects, such as shoes, food waste, or animals into the

washer.

- This can cause abnormal vibrations that can damage the washer, and, in the case of

pets, cause severe injury or death.

Do not press the buttons using sharp objects such as pins, knifes, ﬁ ngernails, etc.

- This may result in electric shock or injury.

Do not wash laundry contaminated by oils, creams or lotions usually found in skincare

shops or massage clinics.

- This may result in the rubber seal becoming deformed and water leakage.

Do not leave metal objects (safety pins, hair pins, etc.) or bleach in the tub for long periods

of time.

- This may cause the tub to rust.

- If rust appears on the surface of the tub, apply a neutral cleansing agent to the surface

and use a sponge to clean it. Never use a metal brush.

WF435A-03159B-02_EN_20120829.indd Sec1:10WF435A-03159B-02_EN_20120829.indd Sec1:10 2012-08-31  12:32:582012-08-31  12:32:58

safety information _11

SAVE THESE INSTRUCTIONS

Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry

contaminated by dry cleaning detergent.

- This may result in spontaneous combustion or ignition due to the heat from the oxidation

of the oil.

Do not use hot water from water cooling/heating devices.

- This may result in problems with the washer.

Do not use natural hand-washing soap in the washer.

- If it hardens and accumulates inside the washer, it may result in problems with the

product, discoloration, rust or bad odors.

Do not wash large laundry items such as bedding in the washing net.

- Failing to do so may result in injury due to abnormal vibrations.

- Place smaller items, such as lace socks and lingerie in the washing net.

Do not use hardened detergent.

- If it accumulates inside the washer, it may cause water leakage.

Do not wash throw rugs or doormats.

- If you wash throw rugs or doormats, sand will accumulate inside the washer. It may

result in errors such as no draining.

Take care that children’s ﬁ ngers are not caught in the door when closing it.

- This may result in injury.

CRITICAL CLEANING INSTRUCTIONS

Do not clean the appliance by spraying water directly onto it.

Do not use benzene, thinner or alcohol to clean the appliance.

- This may result in discoloration, deformation, damage, electric shock or ﬁ re.

Before cleaning or performing maintenance, unplug the appliance from the wall socket.

- Failing to do so may result in electric shock or ﬁ re.

WARNING

WF435A-03159B-02_EN_20120829.indd Sec1:11WF435A-03159B-02_EN_20120829.indd Sec1:11 2012-08-31  12:32:592012-08-31  12:32:59

12_ contents

contents

INSTALLING YOUR WASHER

14

14 Unpacking your washer

14 Overview of your washer

15 Electrical

15 Grounding

15 Water

15 Drain facility

16 Flooring

16 Location considerations

16 Alcove or closet installation

16 Undercounter installation(washer only)

17 With optional pedestal base or stacking kit

18 Important note to installer

18 Installation flow chart

OPERATING INSTRUCTIONS

21

21 Loading your washer

21 Getting started

WASHING A LOAD OF LAUNDRY

22

22 Overview of the control panel

24 Delay Start

25 Child Lock

26 Spin Only

26 Drum Light

26 Garment+

26 My cycle

27 Steam

27 Smart Care

28 Washing clothes using the cycle selector

29 Detergent use

29 Features

WF435A-03159B-02_EN_20120829.indd Sec6:12WF435A-03159B-02_EN_20120829.indd Sec6:12 2012-08-31  12:32:592012-08-31  12:32:59

contents _13

MAINTAINING YOUR WASHER

31

31 Cleaning the exterior

31 Cleaning the interior

32 Cleaning the dispensers

32 Storing your washer

33 Cleaning the debris filter

34 Cleaning the door seal/bellow

34 Preserving the top cover and the front frame

35 Pure Cycle

TM

TROUBLESHOOTING

36

36 Check these points if your washer…

38 Information codes

APPENDIX

40

40 Fabric care chart

41 Cycle chart

43 Helping the environment

43 Declaration of conformity

43 Specification

01 contents

WF435A-03159B-02_EN_20120829.indd Sec6:13WF435A-03159B-02_EN_20120829.indd Sec6:13 2012-08-31  12:32:592012-08-31  12:32:59

14_ installing your washer

installing your washer

UNPACKING YOUR WASHER

Unpack your Washer and inspect it for shipping damage. Make sure you have received all of the items

shown below. If your Washer was damaged during shipping, or you do not have all of the items, contact

1-800-SAMSUNG(726-7864).

To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit.

Packing materials can be dangerous to children; keep all packing material (plastic bags, polystyrene,

etc.) well out of the reach of children.

OVERVIEW OF YOUR WASHER

Parts supplied

Wrench Bolt hole covers Water supply hoses

Hose guide User manual book Plastic zip hose tie

Tools needed

Pliers Flat screwdriver

Adjustable legs

Cold water supply

hose

Hot water supply

hose

Drain Hose

Detergent drawer

Control panel

Door

Tub

Debris filter

Drain tube

Filter cover

WARNING

WF435A-03159B-02_EN_20120829.indd Sec3:14WF435A-03159B-02_EN_20120829.indd Sec3:14 2012-08-31  12:32:592012-08-31  12:32:59

installing your washer _15

BASIC LOCATION REQUIREMENTS

Electrical

• 120 Volt 60 Hz 15 AMP fuse or circuit breaker

• Individual branch circuit serving only your Washer is recommended.

• Your Washer is equipped with a power cord.

NEVER USE AN EXTENSION CORD.

Grounding

ELECTRICAL GROUNDING IS REQUIRED ON THIS APPLIANCE.

This appliance must be grounded. In the event of malfunction or breakdown, grounding will

reduce the risk of electric shock by providing a path of least resistance for electric current.

This appliance is equipped with a power cord having a three-prong grounding plug for use in a

properly installed and grounded outlet.

The plug must be plugged into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in a risk of electrical

shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the

appliance is properly grounded. Do not modify the plug provided with the appliance – if it

does not fit the outlet, have a proper outlet installed by a qualified electrician.

IMPORTANT SAFETY PRECAUTIONS

• To prevent unnecessary risk of fire, electrical shock or personal injury, all wiring and

grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No.

70 Latest Revision and local codes and ordinances. It is the personal responsibility of the

appliance owner to provide adequate electrical service for this appliance.

NEVER CONNECT GROUND WIRE TO PLASTIC PLUMBING LINES, GAS LINES, OR HOT

WATER PIPES.

Water

To correctly fill your Washer in the proper amount of time, water pressure of 20-116 psi (137-

800kPa) is required.

Water pressure less than 20 psi may cause water valve failure, or may not allow the water valve

to shut off completely. Or, it may extend the fill time beyond what your Washer controls allow,

resulting in your Washer turning off. A time limit is built into the controls in the event of an internal

hose becoming loose and flooding your home.

The water faucets must be within 4 feet/122 cm of the back of your Washer for the inlet hoses

provided with your Washer.

Accessory inlet hoses are available in various lengths up to 10 feet/305cm for faucets that

are further away from the back of your Washer.

To avoid the possibility of water damage:

• Have water faucets easily accessible

• Turn off faucets when the washer is not in use.

• Periodically check that there is no leakage from the water inlet hose fittings.

CHECK ALL CONNECTIONS AT THE WATER VALVE AND FAUCET FOR LEAKS.

Using hard water or bad quality water may cause the water supply valve to operate

abnormally.

Drain facility

The recommended height of the standpipe is 18 in/46 cm. The drain hose must be routed

through the drain hose clip to the standpipe. The standpipe must be large enough to accept the

outside diameter of the drain hose. The drain hose is attached at the factory.

01 installing your washer

CAUTION

WARNING

CAUTION

WARNING

WF435A-03159B-02_EN_20120829.indd Sec3:15WF435A-03159B-02_EN_20120829.indd Sec3:15 2012-08-31  12:32:592012-08-31  12:32:59

16_ installing your washer

installing your washer

Flooring

For best performance, your Washer must be installed on a solidly constructed floor. Wood floors

may need to be reinforced to minimize vibration and/or unbalanced load situations. Carpeting

and soft tile surfaces are contributing factors in vibration may cause your washer to move slightly

during the spin cycle.

Never install your washer on a platform or weakly supported structure.

Location considerations

Do not install your washer in areas where water may freeze, since your washer will always

maintain some water in its water valve, pump, and hose areas. This can cause damage to the

pump, hoses and other components.

Alcove or closet installation

MINIMUM CLEARANCES FOR CLOSET AND ALCOVE INSTALLATIONS:

Sides – 1 in / 25 mm

Rear – 5.9 in / 150 mm

Top – 17 in / 432 mm

Closet Front – 2 in / 51 mm

If the washer and dryer are installed together, the closet front must have at least a 72 in² (465

cm²) unobstructed air opening. Your washer alone does not require a specific air opening.

A. Recessed area

B. Side view - closet or confined area

Undercounter installation(washer only)

1 in.

(2.5 cm)

1 in.

(2.5 cm)

1 in.

(2.5 cm)

27 in.

(68.6 cm)

27 in.

(68.6 cm)

A

2 in.

(5 cm)

5.9 in.

(15 cm)

34.1 in.

(86.5 cm)

17 in.

(43.2 cm)

B

1 in.

(2.5 cm)

1 in.

(2.5 cm)

27 in.

(68.6 cm)

39.6 in.

(100.6 cm)

WF435A-03159B-02_EN_20120829.indd Sec3:16WF435A-03159B-02_EN_20120829.indd Sec3:16 2012-08-31  12:32:592012-08-31  12:32:59

installing your washer _17

With optional pedestal base or stacking kit

Required Dimensions for Installation With Pedestal

Required Dimensions for Installation With Stacking Kit

01 installing your washer

1 in.

(2.5 cm)

27 in.

(68.6 cm)

78 in.

(198 cm)

6 in. *

(15.2 cm)

Closet or Door

48 in.² *

(310 cm²)

24 in.² *

(155 cm²)

3 in.

(7.6 cm)

3 in.

(7.6 cm)

1 in.

(2.5 cm)

34.1 in.

(86.5 cm)

5.9 in.**

(15 cm)

5 in.

(12.7 cm)

27 in.

(68.6 cm)

39.0 in.

(99 cm)

53.6 in.

(136.2 cm)

5.9 in.

(15 cm)

34.1 in.

(86.5 cm)

51.2 in. (130 cm) to clear open door

WF435A-03159B-02_EN_20120829.indd Sec3:17WF435A-03159B-02_EN_20120829.indd Sec3:17 2012-08-31  12:32:592012-08-31  12:32:59

18_ installing your washer

installing your washer

IMPORTANT NOTE TO INSTALLER

Please read the following instructions carefully before installing your Washer.

These instructions should be retained for future reference.

We recommend you hire a professional for installation of this washer.

Installation flow chart

Selecting a

location

Running a Calibration mode

(Refer to the following

description)

Finish the

installation

Removing the shipping

bolts (*Drum only)

Connecting the water

and the drain

Adjusting the

levelling feet

Powering your washing

machine

[Running a test cycle]

Run a test cycle (Rinse+Spin) with

small amount of laundary

(about 4~5 Towels)

Yes

Please

check again

before

steps.

No

Does

your washer

have excess vibration

or noise?

STEP 1

Selecting a Location

Before you install your washer, make sure the location:

• Has a hard, level surface without carpeting or flooring that may obstruct ventilation.

• Has no dust, oil and detergent etc.

• Is away from direct sunlight

• Has adequate ventilation

• Will not freeze (below 32 °F or 0 °C)

• Is away from heat sources such as oil or gas

• Has enough slack for the power cord.

• Doesn’t have any carpeting that will obstruct ventilation openings.

STEP 2

Removing the Shipping Bolts

Before using your Washer, you must remove the four shipping

bolts from the back of the unit.

1. Loosen all the bolts with the supplied wrench.

2. Slide the bolt and spacer up and remove the bolt with the

spacer through the hole in the rear wall of your washer.

Repeat for each bolt.

3.

Fill the holes with the supplied Bolt Hole Covers (See page 14).

4. Keep the shipping bolts and spacers for future use.

WF435A-03159B-02_EN_20120829.indd Sec3:18WF435A-03159B-02_EN_20120829.indd Sec3:18 2012-08-31  12:33:002012-08-31  12:33:00

installing your washer _19

STEP 3

Installing your Washer

1. Place the drain hose in the drain facility. Be

sure an airtight connection is NOT made

between the drain hose and the standpipe.

The standpipe must be at least 18 in or 46

cm high.

Caution must always be exercised to

avoid collapsing or damaging the drain

hose. For best results, the drain hose

should not be restricted in any way – by

elbows, couplings, or excessive lengths.

For situations where the drain hose

cannot be conveniently elevated to at

least 18 in or 46 cm, the drain hose must

be supported.

2. Check the inlet hose to ensure a washer is inside each fill

hose.

Thread the inlet hoses to the HOT and COLD faucet

connections.

On the other end of the hose, check for one rubber washer

per hose and install each fill hose to the water valve. Make

sure the hose with the Hot printed line is attached to the

HOT faucet. Tighten by hand until snug, then two-thirds of a

turn with pliers.

3. Connect the other end of the Hot and Cold water supply

hose to the inlet water valve at the rear of the washing

machine.Tighten by hand until snug, then two-thirds of a

turn with pliers.

For correct water use, connect both HOT and COLD water

valves. If either or both are not connected, an “nF” (no fill)

error can occur.

4. Turn on the “HOT” and “COLD “water supply and check all

connections at the water valve and the faucet for leaks.

01 installing your washer

96” Max

18” Min

96” Max

18” Min

Hose

retainer

Tie strap

Laundry tub Stand pipe

Cold Hot

Cold printed Hot printed

Rubber

Washer

WF435A-03159B-02_EN_20120829.indd Sec3:19WF435A-03159B-02_EN_20120829.indd Sec3:19 2012-08-31  12:33:002012-08-31  12:33:00

20_ installing your washer

5. Slide your washer into position.

6. Level your washer by turning the leveling legs in or out as

necessary by hand or by using the wrench included with

your washer.

When your washer is level, tighten the locking nuts using

the wrench or (-) flathead screwdriver.

7. Plug the power cord into a 3-Prong, well grounded 120

volt 60 Hz approved electrical outlet protected by a 15-

amp fuse or comparable circuit breaker.

Your washer is grounded through the third prong of the

power cord when plugged into a three-prong grounded

receptacle.

Your Washer must be leveled on all four sides. A

carpenter’s level should be used on all four corners of

your Washer. It’s a good idea after the first dozen washes

to recheck your washer’s levelness.

Avoid damage to the legs. Do not move

the Washer unless the Locking-nuts are

fastened to the bottom of the Washer.

STEP 4

Calibration mode

Before using Calibration mode, be sure to take out all items from the drum.

Your Samsung washer automatically detects the weight of the laundry.

For more accurate weight detection, please run Calibration Mode after the installation.

Calibration mode is performed by following the steps below.

1. Turn on the washer.

2. Press the Temp. button and Delay Start button simultaneously at least 3 seconds.

3. Remove any contents in the tub and close the door.

4. Press the Start/Pause button to run Calibration Mode.

5. The drum rotates clockwise and counterclockwise approximately for for approximately 3

minutes.

6. When Calibration Mode is finished, the “En/End” appears on the display and the washing

machine turns off automatically. The washing machine is now ready for use.

installing your washer

Levelling

Leg

Locking

Nut

WF435A-03159B-02_EN_20120829.indd Sec3:20WF435A-03159B-02_EN_20120829.indd Sec3:20 2012-08-31  12:33:002012-08-31  12:33:00

La page est en cours de chargement...

Samsung WF435ATGJWR Manuel utilisateur

Ce manuel convient également à

Samsung WF435ATGJWR Manuel utilisateur

dans d''autres langues

Documents connexes