Winmate W07FA3S-GSM1 Guide de démarrage rapide

Please read these instructions carefully before using this product, and save this manual for future use.

G-WIN Slim IP65

P-CAP Panel PC

W07FA3S-GSM1(HB)

W10FA3S-GSH2

W10FA3S-GSH1(HB)

R12FA3S-GSM2(HB)

R15FA3S-GSC3(HB)

Quick Start Guide

V1.0

For more information on this and other Winmate

products, please visit our website at:

www.winmate.com

Document Part Number: 91521110100O

ii

FCC Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

class "B" digital device, pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at him own expense.

European Union

Electromagnetic Compatibility Directive (2014/30/EU)

 EN55024: 2010/ A1: 2015

o IEC61000-4-2: 2009

o IEC61000-4-3: 2006+A1: 2007+A2: 2010

o IEC61000-4-4: 2012

o IEC61000-4-5: 2014

o IEC61000-4-6: 2014

o IEC61000-4-8: 2010

o IEC61000-4-11: 2004

 EN55032: 2012/AC:2013

 EN61000-3-2:2014

 EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

 EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

This equipment is in conformity with the requirement of the following EU

legislations and harmonized standards. Product also complies with the

Council directions.

iii

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted

in any form or by any means, electronic or mechanical, for any purpose, without

the prior written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their

respective owners.

Disclaimer

Winmate Inc. reserve the right to make changes, without notice, to any product,

including circuits and/or software described or contained in this manual in order

to improve design and/or performance. We assume no responsibility or liability

for the use of the described product(s) conveys no license or title under any

patent, copyright, or masks work rights to these products, and make no

representations or warranties that these products are free from patent, copyright,

or mask work right infringement, unless otherwise specified. Applications that

are described in this manual are for illustration purposes only. We make no

representation or guarantee that such application will be suitable for the

specified use without further testing or modification.

Warranty

Winmate Inc. warranty guarantees that each of its products will be free from

material and workmanship defects for a period of one year from the invoice date.

If the customer discovers a defect, we will, at his/her option, repair or replace the

defective product at no charge to the customer, provide it is returned during the

warranty period of one year, with transportation charges prepaid. The returned

product must be properly packaged in its original packaging to obtain warranty

service. If the serial number and the product shipping data differ by over 30

days, the in-warranty service will be made according to the shipping date. In the

serial numbers the third and fourth two digits give the year of manufacture, and

the fifth digit means the month (e. g., with A for October, B for November and C

for December).

For example, the serial number 1W14Axxxxxxxx means October of year 2014.

iv

Customer Service

We provide a service guide for any problem by the following steps: First, visit the

website of our distributor to find the update information about the product.

Second, contact with your distributor, sales representative, or our customer

service center for technical support if you need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business

day. We are always ready to give advice on application requirements or specific

information on the installation and operation of any of our products.

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections

while the power is on. Sensitive electronic components can be

damaged by sudden power surges. Only experienced electronics

personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque

vous travaillez sur celui-ci. Ne pas brancher de connections lorsque

l’alimentation est présente. Des composantes électroniques

sensibles peuvent être endommagées par des sauts d’alimentation.

Seulement du personnel expérimenté devrait ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution, use a

grounding wrist strap at all times. Place all electronic components

in a static-dissipative surface or static-shielded bag when they are

not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge

statique avant de toucher la carte CPU. Les équipements

électroniques moderns sont très sensibles aux décharges

d’électricité statique. Toujours utiliser un bracelet de mise à la

terre comme précaution. Placer toutes les composantes

électroniques sur une surface conçue pour dissiper les charge, ou

dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.

v

CONTENTS

INTRODUCTION 1

Features 1

Package Contents 2

Description of Parts 3

GETTING STARTED 7

Turning On Your Device 7

Configuring Serial Port Settings 8

Brightness Adjustment 10

Operating the Device 11

Setting up the Device 11

Home Screen 11

Quick Settings 12

Ethernet 13

Configuring Ethernet 14

Winmate® Home Manager (WHM) 15

How to Lock Applications 15

How to Unlock Applications 18

How to Change Password 19

Turning Off Your Device 19

INSTALLATION 20

Wiring Requirements 20

Connecting to Other Devices 21

Connector Description 22

Power Input Connector 22

Serial Interface Connector 23

Giga LAN + USB 2.0 Connector 24

USB OTG Connector 25

MicroSD Card 25

Mounting 26

VESA Mounting 26

Panel Mounting 27

SPECIFICATIONS 28

Hardware Specifications 28

APPENDIX 30

Appendix A: Cleaning the Monitor 30

Appendix B: Winmate Software Development Kit 31

1

INTRODUCTION

Congratulations on purchasing Winmate® G-WIN Slim IP65 with P-CAP Panel

PC. The elegantly designed, yet rugged, industrial grade G-WIN S65 series is

designed for usability with brilliant true-flat screens, which offer superior

readability and Projected Capacitive Multi-Touch (P-CAP) technology, available

in 7”, 10.1”, 12.1” and 15” options.

G-WIN Slim IP65 Panel PC operates on Freescale® Cortex® A9 i.MX6 Dual

Core 1GHz (optional Quad Core) processor and support Android, Linux Kernel or

Ubuntu operating systems. The Panel PC features Projected Capacitive Multi-

Touch (P-CAP). These models are full IP 65 dustproof and waterproof and have

M12 connectors.

Features

Winmate® G-WIN Slim IP65 with P-CAP Panel PC features:

 Freescale® Cortex® A9 i.MX6 Dual Core 1GHz (optional Quad Core)

 Android, Linux Kernel or Ubuntu OS

 Projected Capacitive Multi-Touch (P-CAP)

 Fanless cooling system and Ultra-low power consumption

 Onboard 1GB LPDDR3

 Onboard 16GB eMMC Flash

 Full IP65 rating

 1 x LAN, 1 x RS232, 1 x USB, 1 x USB OTG, 1 x Console, 1 x MicroSD

2

Package Contents

Carefully remove the box and unpack your device. Please check if all the items

listed below are inside your package. If any of these items are missing or

damaged contact us immediately.

Standard factory shipment list:

Panel PC

Quick Start Guide

(Hardcopy)

Driver CD & User

Manual

Varies by product

specifications

91521110100O

9171111I102Y

M12 Power Cable

M12 Serial Interface

Cable

M12 USB/ LAN Cable

94J003L020K8

94G0123090Q0

94E0128040K0

I/O Protective Cap x 3

60Y031131000

3

Description of Parts

W07FA3S-GSM1(HB)

Unit: mm

Dimensions: 189.4 x 145.4 x 39.8

№

Description

№

Description

󰈆

9-24V DC (M12 Type)

󰈉

USB OTG, Console Port, MicroSD

󰈇

LAN, USB (M12 Type)

󰈊

1 Watt Speaker

󰈈

RS232 (M12 Type)

4

W10FA3S-GSH2, W10FA3S-GSH1(HB)

Unit: mm

Dimensions: 263.28 x 173.6 x 40.2

№

Description

№

Description

󰈆

9-24V DC (M12 Type)

󰈉

USB OTG, Console Port, MicroSD

󰈇

LAN, USB (M12 Type)

󰈊

1 Watt Speaker

󰈈

RS232 (M12 Type)

5

R12FA3S-GSM2(HB)

Unit: mm

Dimensions: 296.2 x 226.7 x 45.5

№

Description

№

Description

󰈆

9-24V DC (M12 Type)

󰈉

USB OTG, Console Port, MicroSD

󰈇

LAN, USB (M12 Type)

⑤

1 Watt Speaker

󰈈

RS232 (M12 Type)

6

R15FA3S-GSC3(HB)

Unit: mm

Dimensions: 363.4 x 277.86 x 45.2

№

Description

№

Description

󰈆

9-24V DC (M12 Type)

󰈉

USB OTG, Console Port, MicroSD

󰈇

LAN, USB (M12 Type)

󰈊

1 Watt Speaker

󰈈

RS232 (M12 Type)

7

GETTING STARTED

Turning On Your Device

1. Remove the protective cap of the power connector.

2. Connect power cable to the connector of your device. Make sure the

cable fits to the connector, then tighten the O-ring (by turning clockwise)

to secure the connection.

3. The device will boot automatically when powered on.

8

Configuring Serial Port Settings

Serial COM Port can be configured for RS-232, RS-422 or RS-485. Winmate

provide COM port settings application for Android OS.

To configure serial port settings:

1. Go to Settings > Accessibility.

2. Go to Accessibility > Comport-Setting.

9

3. Go to Comport-Setting > Comport 1/ Comport 2/ Comport 3

* Select Comport 1/ Comport 2/ Comport 3 that you want to configure.

4. In COM port settings select Comport 1 > RS232/RS422/RS485

*This example shows how to configure Comport 1 settings

10

Brightness Adjustment

Use can adjust the screen brightness in Android settings. Pull down from the top

of the screen to get the notifications area. You can also access display settings

in the settings menu.

To adjust the brightness of the screen:

Go to Settings > Display > Brightness

Tap the cursor to the left to reduce the screen brightness.

Tap the cursor to the right to increase the screen brightness.

11

Operating the Device

Winmate® G-WIN Slim IP65 with P-CAP Panel PC.runs on Android 4.4 OS

(Default).

Setting up the Device

When you first turn on your device, you will see a Welcome screen. Choose the

language you want and touch Start or the Start icon. When prompted, you can

sign in with your Google Account to create one at that time. You can also

choose to skip this step and create one later.

Home Screen

Back

Opens the previous screen you were working in. Once you back up to

the Home screen, you can’t go back any further.

Home

Opens the central Home screen. To open Google Now, swipe up.

Recent Apps

Opens a list of thumbnail images of apps you’ve worked with recently.

To open an app, touch it. To remove a thumbnail from the list, swipe it

left or right.

12

Quick Settings

To open Settings, Swipe down from the top right of the screen and touch the

Settings icon.

NOTE

You can open your device’s Settings app from the All Apps screen

or from Quick Settings. For example, to change notification

sounds, and volume go to Settings > Device > Sound to change

the volume.

13

Ethernet

1. Connect Ethernet Cable to the device.

2. Go to APPS > Ethernet .

3. Ethernet APP main menu appears

Setting

Description

Check Ethernet

Check Ethernet connection parameters: IP mode, IP

address, DNS address and others

Configure Ethernet

Enable Ethernet connection and configure its such

as connection type

Advanced Settings

Configure advanced parameters of the Ethernet

14

Configuring Ethernet

To configure Ethernet settings go to Apps > Ethernet > Configure Ethernet.

*Default settings: Ethernet OFF. Swipe Ethernet ON to activate Ethernet connection.

Connection Type

Setting

Description

DHCP

The device automatically capture IP-address from the router

Static IP

Allows to manually set up IP-address, DNS, Network and

Gateway

Configuring Ethernet

To check the Ethernet settings go to APPS > Ethernet > Check Ethernet

Ethernet settings menu appears on the top right side of the desktop.

La page charge ...

Winmate W07FA3S-GSM1 Guide de démarrage rapide

Ce manuel convient également à

Winmate W07FA3S-GSM1 Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents