Winmate Slim-line Manuel utilisateur

10.1" S-Series HMI

W10FA3S-PCH2AC-PoE (with LED light bar)

W10FA3S-PCH2-PoE (without LED light bar)

Slim-line

User Manual

Version 1.3

Document Part Number: 9152101I1002

i

Preface

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits

and/or software described or contained in this manual in order to improve design and/or

performance. We assume no responsibility or liability for the use of the described

product(s) conveys no license or title under any patent, copyright, or masks work rights to

these products, and make no representations or warranties that these products are free

from patent, copyright, or mask work right infringement, unless otherwise specified.

Applications that are described in this manual are for illustration purposes only. We make

no representation or guarantee that such application will be suitable for the specified use

without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and

workmanship defects for a period of one year from the invoice date. If the customer

discovers a defect, we will, at his/her option, repair or replace the defective product at no

charge to the customer, provide it is returned during the warranty period of one year, with

transportation charges prepaid. The returned product must be properly packaged in its

original packaging to obtain warranty service. If the serial number and the product shipping

data differ by over 30 days, the in-warranty service will be made according to the shipping

date. In the serial numbers the third and fourth two digits give the year of manufacture, and

the fifth digit means the month (e. g., with A for October, B for November and C for

December).

For example, the serial number 1W14Axxxxxxxx means October of year 2014.

ii

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We

are always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

iii

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information

or to alert you to the potential for hardware damage or personal injury. These are Notes,

Important, Cautions, and Warnings. The following is an example of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and explains how to

avoid the potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et

explique comment éviter le problème potentiel.

WARNING!/ AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from electrical

hazards and how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur des

emplacements électriques et comment éviter ces problèmes.

ALTERNATING CURRENT / MISE À LE TERRE!

The Protective Conductor Terminal (Earth Ground) symbol indicates the

potential risk of serious electrical shock due to improper grounding.

Le symbole de Mise à Terre indique le risqué potential de choc électrique

grave à la terre incorrecte.

iv

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections while

the power is on. Sensitive electronic components can be damaged by

sudden power surges. Only experienced electronics personnel should

open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous

travaillez sur celui-ci. Ne pas brancher de connections lorsque

l’alimentation est présente. Des composantes électroniques sensibles

peuvent être endommagées par des sauts d’alimentation. Seulement du

personnel expérimenté devrait ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before touching the

CPU card. Modern electronic devices are very sensitive to static electric

charges. As a safety precaution, use a grounding wrist strap at all times.

Place all electronic components in a static-dissipative surface or static-

shielded bag when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge statique

avant de toucher la carte CPU. Les équipements électroniques moderns

sont très sensibles aux décharges d’électricité statique. Toujours utiliser

un bracelet de mise à la terre comme précaution. Placer toutes les

composantes électroniques sur une surface conçue pour dissiper les

charge, ou dans un sac anti-statique lorsqu’elles ne sont pas dans le

chassis.

Safety Precautions

For your safety carefully read all the safety instructions before using the device. Keep this user

manual for future reference.

 Always disconnect this equipment from any AC outlet before cleaning. Do not use liquid

or spray detergents for cleaning. Use a damp cloth.

 For pluggable equipment, the power outlet must be installed near the equipment and

must be easily accessible.

 Keep this equipment away from humidity.

 Put this equipment on a reliable surface during installation. Dropping it or letting it fall

could cause damage.

 The openings on the enclosure are for air convection and to protect the equipment from

overheating.

v

CAUTION/ATTENTION

Do not cover the openings!

Ne pas couvrir les ouvertures!

 Before connecting the equipment to the power outlet make sure the voltage of the

power source is correct.

 Position the power cord so that people cannot step on it. Do not place anything over the

power cord.

 If the equipment is not used for a long time, disconnect it from the power source to

avoid damage by transient over-voltage.

 Never pour any liquid into an opening. This could cause fire or electrical shock.

 Never open the equipment. For safety reasons, only qualified service personnel should

open the equipment.

 All cautions and warnings on the equipment should be noted.

*Let service personnel to check the equipment in case any of the following problems

appear:

o The power cord or plug is damaged.

o Liquid has penetrated into the equipment.

o The equipment does not work well or you cannot get it to work according to

the user manual.

o The equipment has been dropped and damaged.

o The equipment has obvious signs of breakage.

 Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the equipment.

CAUTION/ATTENTION

Use the recommended mounting apparatus to avoid risk of injury.

Utiliser l’appareil de fixation recommandé pour éliminer le risque

de blessure.

WARNING!/ AVERTISSEMENT!

Only use the connection cords that come with the product. When

in doubt, please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le

produit. Si vous doutez de leur provenance, contactez le

manufacturier.

vi

WARNING!/ AVERTISSEMENT!

Always ground yourself against electrostatic damage to the device.

Toujours vérifier votre mise à la terre afin que l’équipement ne se

décharge pas sur vous.

 Cover workstations with approved anti-static material. Use a wrist strap connected to a

work surface and properly grounded tools and equipment.

 Use anti-static mats, heel straps, or air ionizer for added protection.

 Handle electrostatic-sensitive components, PCB’s and assemblies by the case or the edge of

the board.

 Avoid contact with pins, leads, or circuitry.

 Turn off power and input signals before inserting and removing connectors or test

equipment.

 Keep the work area free of non-conductive materials, such as ordinary plastic assembly aids

and Styrofoam.

 Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that are

conductive.

 Always put drivers and PCB’s component side on anti-static foam.

vii

Important Information

Countries/ Area

Symbol

This equipment complies with essential requirements

of:

European Union

Electromagnetic Compatibility Directive(2014/30/EU)

Low Voltage Directive (2014/35/EU)

Restrictions of the use of certain hazardous substances

(RoHS) Directive (2011/65/EU)

USA

FCC Part 15 Subpart B Regulations Class B

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the

interference at him own expense.

Refer to Certificates for the original document.

viii

EC Declaration of Conformity

[English]

The object of the declaration described above [A] is in conformity with the requirement

of the following EU legislations [B] and harmonized standards [C].

Product also complies with the Council directions [D].

[German]

Das oben beschriebene Objekt [A] entspricht den Anforderungen der nachfolgend

aufgeführten EU-Vorgben [B] und den harmonisierten Normen [C]. Das Produkt

entspricht außerdem den EU-Direktiven [D].

[French]

L'objet de la déclaration décrite ci-dessus [A] est conformité aux conditions stipulées dans

les législations de l’Union européenne énoncées ci-après [B] et aux normes harmonisées [C].

Ce produit est également conforme aux directives du Conseil européen [D].

[Other languages]

Other languages are available upon request.

Refer to Certificates for the original document.

ix

About This User Manual

This User Manual provides information about using the Winmate® 10.1” S-Series HMI

(Freescale).

The documentation set for the 10.1” S-Series HMI provides information for specific user

needs, and includes:

 10.1” S-Series HMI Quick Start Guide - describes how to get the HMI up and running.

 10.1” S-Series HMI User Manual – contains detailed description on how to use the

HMI, its components and features.

NOTE:

Some pictures in this guide are samples and can differ from actual product.

Document Revision History

Version

Date

Note

Author

1.0

18-Feb-2016

Initial Release

Andy Lee

1.1

7-Mar-2016

Add ADB Driver Installation

Andy Lee

1.2

11-Mar-2016

Add Touch Screen Calibration

Andy Lee

1.3

17-Aug-2016

Add Appendix A: NFC Tag Support,

Reading NFC Tag, Using Front Camera,

Winmate Home Manager.

Andy Lee

x

Contents

Preface ................................................................................................................................ i

About This User Manual ..................................................................................................... ix

1 Introduction .....................................................................................................................2

1.1 Product Features ........................................................................................................ 2

1.2 Hardware Specifications ............................................................................................ 3

1.3 Software Support ....................................................................................................... 4

1.4 Packing List ................................................................................................................. 5

1.4.1 Accessories ...................................................................................................... 5

1.4.2 Options ............................................................................................................ 6

1.5 Appearance ................................................................................................................ 8

1.6 Dimensions ................................................................................................................. 9

2 Getting Started .................................................................................................................2

2.1 Powering On ............................................................................................................... 2

2.1.1 AC Adapter Components ................................................................................. 2

2.1.2 Power Considerations ..................................................................................... 3

2.1.3 Connecting the Source of Power ..................................................................... 3

2.2 Connector Pinouts ..................................................................................................... 4

2.2.1 DC-in Terminal Block Connector ..................................................................... 4

2.2.2 POE/LAN Connector ........................................................................................ 4

2.2.3 Serial Port Connector ...................................................................................... 4

2.2.4 USB 2.0 Connector ........................................................................................... 5

2.2.5 USB OTG Connector......................................................................................... 5

2.2.6 Micro SD Card Slot ........................................................................................... 5

2.3 Turning On/ Off .......................................................................................................... 6

2.4 Configuring Serial COM Port Settings ........................................................................ 7

3 Operating the Device ...................................................................................................... 10

3.1 Operating System ..................................................................................................... 10

3.2 Multi-Touch .............................................................................................................. 10

3.3 System Settings ........................................................................................................ 11

3.3.1 Set up the Device ........................................................................................... 11

xi

3.3.2 Home Screen ................................................................................................. 11

3.3.3 Quick Settings ................................................................................................ 12

3.4 Ethernet ................................................................................................................... 13

3.4.1 Configuring Ethernet Settings ....................................................................... 14

3.4.2 Checking Ethernet ......................................................................................... 14

3.5 Testing LED Light Bar ................................................................................................ 15

3.6 Reading NFC Tag ...................................................................................................... 16

3.7 Winmate® Home Manager (WHM) ......................................................................... 18

3.7.1 How to Lock Applications .............................................................................. 18

3.7.2 How to Unlock Applications .......................................................................... 20

3.7.3 How to Change Password .............................................................................. 22

3.8 Using Front Camera ................................................................................................. 22

3.8.1 The Camera Menu ......................................................................................... 22

3.8.2 Shooting Photos ............................................................................................ 23

3.8.3 Shooting Videos ............................................................................................. 24

4 Software Installation ...................................................................................................... 27

4.1 Android Debug Bridge (ADB) Driver Installation ..................................................... 27

4.1.1 Disabling Driver Signature on Windows 8 ..................................................... 28

4.1.2 ADB Driver Installation .................................................................................. 32

4.2 Installing Android Debug Bridge (ADB) .................................................................... 36

4.3 Download Image Tool .............................................................................................. 37

4.4 OTA Update Guide ................................................................................................... 38

4.5 OS Image Update Guide ........................................................................................... 41

5 Mounting Solutions ........................................................................................................ 43

5.1 Cable Mounting Considerations .............................................................................. 43

5.2 Safety Precautions ................................................................................................... 44

5.3 Mounting Guide ....................................................................................................... 44

5.3.1 VESA Mount ................................................................................................... 44

5.3.2 Flush Mount / Panel Mount .......................................................................... 45

5.4 Optional Mounting Solutions ................................................................................... 46

5.4.1 Front Side Wall Mount .................................................................................. 46

5.4.2 Desk Stand ..................................................................................................... 47

xii

6 Technical Support ........................................................................................................... 49

6.1 Software Developer Support ................................................................................... 49

6.2 Problem Report Form .............................................................................................. 50

7 Certificates ..................................................................................................................... 52

7.1 FCC Declaration of Conformity ................................................................................ 52

7.1.1 W10FA3S-PCH2AC-PoE .................................................................................. 52

7.1.2 W10FA3S-PCH2-PoE ...................................................................................... 53

7.2 EC Declaration of Conformity .................................................................................. 54

7.2.1 W10FA3S-PCH2AC-PoE .................................................................................. 54

7.2.2 W10FA3S-PCH2-PoE ...................................................................................... 55

Appendix A: NFC Tag Support ............................................................................................ 57

10.1” S-Series HMI (Freescale)

1

Introduction

This chapter gives you product overview,

describes features and hardware specification.

You will find all accessories that come with the

HMI device in the packing list. Mechanical

dimensions and drawings included in this

chapter.

User Manual Chapter 1 Introduction

10.1” S-Series HMI (Freescale)

2

1 Introduction

Interactive and smart automation systems of intelligent buildings are in a fast growing

phase. Winmate multi-touch S-Series HMI is suitable for home automation and room

management systems. Flat surface is easy-to-clean and delivers aesthetically pleasing

look for any interior. By connecting to centralized database, it can provide real time

update for booking status and available schedule, or perform as a synchronous display

in meetings. Optional NFC is especially useful in access control applications.

S-Series HMI run on Freescale Cortex A9 i.MX6 Dual Core 1GHz (can be upgraded to

Quad Core) processor and support Android 4.4 and Linux Kernel 3.0.35 operating

systems. The HMI device features P-Cap touch-screen. These models designed with

front IP 65 dust and water proof, and IP22 on the back side.

The W10FA3S-PCH2AC-PoE model support an exceptional feature - LED light bar. With

the help of red, green, blue and orange LED indicators you can see the status of the

machine or processes afar. It significantly reduces power consumption by keeping the

display turned off.

1.1 Product Features

Winmate® 10.1” S-Series HMI features:

 10.1'' 1280 x 800 Resolution with P-Cap multi-touch screen

 PoE standard IEEE 802.3at (25 W)

 Fanless cooling system and ultra-low power consumption

 2 x USB, 2 x RS232 (optional 422/485), 1 x micro SD slot

 Room booking schedule, access control, room information display

 Front IP65 water and dust proof

 Red/ Green/ Blue/ Orange LED light bar indicators on both sides

 Optional NFC reader

 Optional 2MP Front Camera

User Manual Chapter 1 Introduction

10.1” S-Series HMI (Freescale)

3

1.2 Hardware Specifications

HMI Device:

Model Name

W10FA3S-PCH2AC-PoE/ W10FA3S-PCH2-PoE

Display

Specifications

Size

10.1" TFT (widescreen)

Resolution

1280 x 800

Brightness (



)

300 cd/m (typ.)

Contrast Ratio

800:1 (typ.)

Viewing Angle

-89~89 (H); -89~89 (V)

Max Colors

262K (6bit)

Touch

Projective-capacitive touch

System

Specification

CPU

Freescale® Cortex® A9 i.MX6 Dual Core

1GHz (Optional Quad Core)

System Chipset

Freescale® i.MX6

Memory

1GB LPDDR3 (Optional 2GB LPDDR3)

Storage

16 GB eMMC (default)

mSATA/ Micro SD card

Ethernet

Dual Broadcom BCM57780 GbE Controller

Speaker

1 x 1 watt speaker

OS

Android 4.4 (default)

Linux Kernel 3.0.35, QT 5.4 Browser

(optional)

I/O Connectors

Serial Port

2 x RS-232 (Default RS-422/optional 485)

USB Port

2 x USB 2.0 host

1 x USB OTG

Ethernet Port

1 x RJ 45-10/100/1000 Mbps (LAN/ PoE)

Memory

1 x Micro SD card

Peripheral

(optional)

NFC

Peer-to-peer, Full ISO 18092(up to 424

Kbits/s)

Reader/writer, ISO 14443-A-

B,MIFARE,FeliCa

NFC Forum tags, ISO 15693

(W10FA3S-PCH2AC-PoE)

User Manual Chapter 1 Introduction

10.1” S-Series HMI (Freescale)

4

Front Camera

2MP Front Camera

(W10FA3S-PCH2AC-PoE)

LED Light Bar

RGBO LED Light Bar on sides

(W10FA3S-PCH2AC-PoE)

Power

Management

Power Input

12 DC in 3-Pin Terminal Block (Phoenix

type)

Power over

Ethernet

Support PoE, requires IEEE 802.3at 25W

power input

Mechanical

Specifications

Dimensions

(W x L x H)

263.28 x 171 x 35.7 mm

Mounting

VESA mount (75 x 75mm)

Cooling System

Fanless design

Environmental

Considerations

Operating Temp.

0 °C to +50 °C

Humidity

30% to 90% (non-condensing)

IP Rating

Front: IP65 water and dust proof

Rear: IP22

1.3 Software Support

SDK:

Android Driver Programming Guide

Linux Programming Guide

User Manual Chapter 1 Introduction

10.1” S-Series HMI (Freescale)

5

1.4 Packing List

Carefully remove the box and unpack your HMI device. Please check if all the items

listed below are inside your package. If any of these items are missing or damaged

contact us immediately.

1.4.1 Accessories

Standard factory shipment list:

10.1” HMI Device

Power Cord

AC Adapter

Terminal Block 3

External USB cable

Driver CD & User

Manual

VESA Mounting

Screws

User Manual Chapter 1 Introduction

10.1” S-Series HMI (Freescale)

6

1.4.2 Options

Package may include optional accessories based on your order.

VESA Desk Stand

Desk Stand Dimensions

Model Name: PCVS-V1

Part Number: 99KK00A0000E

User Manual Chapter 1 Introduction

10.1” S-Series HMI (Freescale)

7

Front Side In-Wall Mount

Model Name: PCFW-V1

Part Number: 99KK00A0000C

Dimensions

La page est en cours de chargement...

Winmate Slim-line Manuel utilisateur

Winmate Slim-line Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents