Winmate W10FA3S-PCH1-PoE Manuel utilisateur

10.1"S-Series HMI

W10FA3S-PCH2AC-PoE (with LED light bar)

W10FA3S-PCH2-PoE (without LED light bar)

W10FA3S-PCH1-PoE (without LED light bar)

Slim-line

User Manual

Version 1.2

Manual Part Number: 9152101I1002

ii

Preface

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits

and/or software described or contained in this manual in order to improve design and/or

performance. We assume no responsibility or liability for the use of the described product(s)

conveys no license or title under any patent, copyright, or masks work rights to these

products, and make no representations or warranties that these products are free from

patent, copyright, or mask work right infringement, unless otherwise specified. Applications

that are described in this manual are for illustration purposes only. We make no

representation or guarantee that such application will be suitable for the specified use

without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and

workmanship defects for a period of one year from the invoice date. If the customer discovers

a defect, we will, at his/her option, repair or replace the defective product at no charge to the

customer, provide it is returned during the warranty period of one year, with transportation

charges prepaid. The returned product must be properly packaged in its original packaging to

obtain warranty service. If the serial number and the product shipping data differ by over 30

days, the in-warranty service will be made according to the shipping date. In the serial

numbers the third and fourth two digits give the year of manufacture, and the fifth digit

means the month (e. g., with A for October, B for November and C for December).

For example, the serial number 1W14Axxxxxxxx means October of year 2014.

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

iii

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to

alert you to the potential for hardware damage or personal injury. These are Notes, Important,

Cautions, and Warnings. The following is an example of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and explains how to avoid the

potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et explique

comment éviter le problème potentiel.

WARNING!/ AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from electrical hazards

and how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur des

emplacements électriques et comment éviter ces problèmes.

ALTERNATING CURRENT / MISE À LE TERRE!

The Protective Conductor Terminal (Earth Ground) symbol indicates the potential

risk of serious electrical shock due to improper grounding.

Le symbole de Mise à Terre indique le risqué potential de choc électrique grave à

la terre incorrecte.

iv

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis whenever

you work with the hardware. Do not make connections while the power is

on. Sensitive electronic components can be damaged by sudden power

surges. Only experienced electronics personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous

travaillez sur celui-ci. Ne pas brancher de connections lorsque l’alimentation

est présente. Des composantes électroniques sensibles peuvent être

endommagées par des sauts d’alimentation. Seulement du personnel

expérimenté devrait ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before touching the CPU

card. Modern electronic devices are very sensitive to static electric charges. As

a safety precaution, use a grounding wrist strap at all times. Place all

electronic components in a static-dissipative surface or static-shielded bag

when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge statique

avant de toucher la carte CPU. Les équipements électroniques moderns sont

très sensibles aux décharges d’électricité statique. Toujours utiliser un

bracelet de mise à la terre comme précaution. Placer toutes les composantes

électroniques sur une surface conçue pour dissiper les charge, ou dans un sac

anti-statique lorsqu’elles ne sont pas dans le chassis.

Safety Precautions

For your safety carefully read all the safety instructions before using the device. Keep this

user manual for future reference.

 Always disconnect this equipment from any AC outlet before cleaning. Do not use

liquid or spray detergents for cleaning. Use a damp cloth.

 For pluggable equipment, the power outlet must be installed near the equipment

and must be easily accessible.

 Keep this equipment away from humidity.

 Put this equipment on a reliable surface during installation. Dropping it or letting it

fall could cause damage.

 The openings on the enclosure are for air convection and to protect the equipment

from overheating.

v

CAUTION/ATTENTION

Do not cover the openings!

Ne pas couvrir les ouvertures!

 Before connecting the equipment to the power outlet make sure the voltage of the

power source is correct.

 Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

 If the equipment is not used for a long time, disconnect it from the power source to

avoid damage by transient over-voltage.

 Never pour any liquid into an opening. This could cause fire or electrical shock.

 Never open the equipment. For safety reasons, only qualified service personnel

should open the equipment.

 All cautions and warnings on the equipment should be noted.

*Let service personnel to check the equipment in case any of the following problems

appear:

o The power cord or plug is damaged.

o Liquid has penetrated into the equipment.

o The equipment has been exposed to moisture.

o The equipment does not work well or you cannot get it to work according

to the user manual.

o The equipment has been dropped and damaged.

o The equipment has obvious signs of breakage.

 Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the

equipment.

CAUTION/ATTENTION

Use the recommended mounting apparatus to avoid risk of injury.

Utiliser l’appareil de fixation recommandé pour éliminer le risque

de blessure.

WARNING!/ AVERTISSEMENT!

Only use the connection cords that come with the product.

When in doubt, please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le

produit. Si vous doutez de leur provenance, contactez le

manufacturier.

vi

WARNING!/ AVERTISSEMENT!

Always ground yourself against electrostatic damage to the

device.

Toujours vérifier votre mise à la terre afin que l’équipement ne

se décharge pas sur vous.

 Cover workstations with approved anti-static material. Use a wrist strap

connected to a work surface and properly grounded tools and equipment.

 Use anti-static mats, heel straps, or air ionizer for added protection.

 Handle electrostatic-sensitive components, PCB’s and assemblies by the case or

the edge of the board.

 Avoid contact with pins, leads, or circuitry.

 Turn off power and input signals before inserting and removing connectors or test

equipment.

 Keep the work area free of non-conductive materials, such as ordinary plastic

assembly aids and Styrofoam.

 Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that

are conductive.

 Always put drivers and PCB’s component side on anti-static foam.

vii

Important Information

Countries/ Area

Symbol

This equipment complies with essential requirements of:

European Union

Electromagnetic Compatibility Directive(2014/30/EU)

Low Voltage Directive (2014/35/EU)

Restrictions of the use of certain hazardous substances

(RoHS) Directive (2011/65/EU)

USA

FCC Part 15 Subpart B Regulations Class B

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at him own expense.

Refer to Certificates for the original document.

viii

EC Declaration of Conformity

[English]

The object of the declaration described above [A] is in conformity with the requirement of the

following EU legislations [B] and harmonized standards [C].

Product also complies with the Council directions [D].

[German]

Das oben beschriebene Objekt [A] entspricht den Anforderungen der nachfolgend aufgeführten

EU-Vorgben [B] und den harmonisierten Normen [C]. Das Produkt entspricht außerdem den EU-

Direktiven [D].

[French]

L'objet de la déclaration décrite ci-dessus [A] est conformité aux conditions stipulées dans les

législations de l’Union européenne énoncées ci-après [B] et aux normes harmonisées [C]. Ce produit

est également conforme aux directives du Conseil européen [D].

[Other languages]

Other languages are available upon request.

Refer to Certificates for the original document.

ix

Revision History

Version

Date

Note

Author

1.0

18-Feb-2016

Initial Release

Andy, edited by Anna

Kiseleva

1.1

07-Mar-2016

Added ADB Driver Installation

Andy, edited by Anna

Kiseleva

1.2

11-Mar-2016

Added Touch Screen

Calibration

Andy, edited by Anna

Kiseleva

x

Contents

Preface ........................................................................................................................................ ii

1 Introduction .............................................................................................................................. 2

1.1 Product Features .............................................................................................................. 2

1.2 Hardware Specifications ...................................................................................................... 3

1.3 Software Support ................................................................................................................. 4

1.4 Packing List ........................................................................................................................... 4

1.4.1 Accessories ................................................................................................................ 4

1.4.2 Options ...................................................................................................................... 5

1.5 Appearance .......................................................................................................................... 7

1.5.1 W10FA3S-PCH2AC-PoE .............................................................................................. 7

1.5.2 W10FA3S-PCH2-PoE / W10FA3S-PCH1-PoE .............................................................. 8

1.6 Dimensions ........................................................................................................................... 9

1.6.1 W10FA3S-PCH2AC-PoE .............................................................................................. 9

1.6.2 W10FA3S-PCH2-PoE / W10FA3S-PCH1-PoE ............................................................ 10

2 Getting Started.......................................................................................................................... 2

2.1 Powering On ......................................................................................................................... 2

2.1.1 AC Adapter Components ........................................................................................... 2

2.1.2 Power Considerations ............................................................................................... 3

2.1.3 Connecting the Source of Power ............................................................................... 3

2.2 Connector Pinouts ............................................................................................................... 4

2.2.1 DC-in Terminal Block Connector ............................................................................... 4

2.2.2 POE/LAN (RJ45) Connector........................................................................................ 4

2.2.3 COM1 Serial Port (RS-232) Connector ....................................................................... 4

2.2.4 2 x USB 2.0 Connector ............................................................................................... 5

2.2.5 USB OTG Connector................................................................................................... 5

2.3 Turning On ........................................................................................................................... 5

2.4 Touch Screen Calibration ..................................................................................................... 5

2.5 Configuring Serial COM Port ................................................................................................ 8

2.6 Turning Off ......................................................................................................................... 10

3 Operating the Device ............................................................................................................... 12

xi

3.1 Multi-Touch ........................................................................................................................ 12

3.2 System Settings .................................................................................................................. 13

3.1.1 Set up the Device ..................................................................................................... 13

3.1.2 Home Screen ........................................................................................................... 13

3.1.3 Quick Settings .......................................................................................................... 14

3.3 Ethernet ............................................................................................................................. 14

3.3.1 Configure Ethernet .................................................................................................. 15

3.3.2 Check Ethernet ........................................................................................................ 16

3.4 LED Light Bar (Demo) ......................................................................................................... 16

3.5 NFC ..................................................................................................................................... 17

4 Software Installation ............................................................................................................... 20

4.1 Android Debug Bridge (ADB) Driver Installation ............................................................... 20

4.1.1 Disabling Driver Signature on Windows 8 ............................................................... 21

4.1.2 ADB Driver Installation ............................................................................................ 26

4.2 Installing Android Debug Bridge (ADB) .............................................................................. 29

4.3 Download Image Tool ........................................................................................................ 30

4.4 OTA Update Guide ............................................................................................................. 30

4.5 OS Image Update Guide ..................................................................................................... 34

5 Mounting Solutions ................................................................................................................. 42

5.1 Cable Mounting Considerations ........................................................................................ 42

5.2 Safety Precautions ............................................................................................................. 42

5.3 Mounting Guide ................................................................................................................. 43

5.3.1 VESA Mount ............................................................................................................. 43

5.3.2 Flush Mount / Panel Mount .................................................................................... 44

5.4 Optional Mounting Solutions ............................................................................................. 44

5.4.1 Front Side Wall Mount ............................................................................................ 44

5.4.2 Desk Stand ............................................................................................................... 45

6 Technical Support Documents ................................................................................................. 47

6.1 Software Developer Support ............................................................................................. 47

6.1.1 Android Driver Programming Guide ........................................................................ 47

6.1.2 Linux Driver Programming Guide ............................................................................ 47

6.1.3 Android Debug Bridge (ADB) ................................................................................... 47

xii

6.2 Problem Report Form ........................................................................................................ 48

7 Certificates .............................................................................................................................. 50

7.1 FCC Declaration of Conformity .......................................................................................... 50

7.1.1 W10FA3S-PCH2AC-PoE ............................................................................................ 50

7.1.2 W10FA3S-PCH2-PoE ................................................................................................ 51

7.1.3 W10FA3S-PCH1-PoE ................................................................................................ 52

7.2 EC Declaration of Conformity ............................................................................................ 53

7.2.1 W10FA3S-PCH2AC-PoE ............................................................................................ 53

7.2.2 W10FA3S-PCH2-PoE ................................................................................................ 54

7.2.3 W10FA3S-PCH1-PoE ................................................................................................ 55

10.1” S-Series HMI

User Manual

1

Introduction

This chapter gives you product overview,

describes features and hardware

specification. You will find all accessories

that come with the HMI device in the

packing list. Mechanical dimensions and

drawings included in this chapter.

10.1” S-Series HMI

User Manual

2

1 Introduction

Interactive and smart automation systems of intelligent buildings are in a fast growing phase.

Winmate multi-touch S-Series HMI is suitable for home automation and room management

systems. Flat surface is easy-to-clean and delivers aesthetically pleasing look for any interior. By

connecting to centralized database, it can provide real time update for booking status and

available schedule, or perform as a synchronous display in meetings. Optional NFC is especially

useful in access control applications.

S-Series HMI run on Freescale Cortex A9 i.MX6 Dual Core 1GHz (can be upgraded to Quad Core)

processor and support Android 4.4 and Linux Kernel 3.0.35 operating systems. The HMI device

features P-Cap touch-screen. These models designed with front IP 65 dust and water proof, and

IP22 on the back side.

The W10FA3S-PCH2AC-PoE model support an exceptional feature - LED light bar. With the help of

red, green, blue and orange LED indicators you can see the status of the machine or processes afar.

It significantly reduces power consumption by keeping the display turned off.

1.1 Product Features

Model Name

W10FA3S-PCH2AC-PoE

W10FA3S-PCH2-PoE

W10FA3S-PCH1-PoE

Product Line

10.1” S-Series HMI (Slim-line)

Resolution

1280 x 800

1024 x 600

Cooling

System

Fanless cooling system and ultra-low power consumption

IP Rating

Front: IP65 water and dust proof

Rear: IP22

LED Light Bar

Default

N/A

NFC

Optional

N/A

PoE

Default (IEEE 802.3at)

10.1” S-Series HMI

User Manual

3

1.2 Hardware Specifications

Model Name

W10FA3S-PCH2AC-PoE

W10FA3S-PCH2-PoE

W10FA3S-PCH1-PoE

Display:

Size/Type

10.1" TFT (widescreen)

Resolution

1280 x 800

1024 x 600

Brightness

300 cd/m (typ.)

200 cd/m (typ.)

Contrast Ratio

800:1 (typ.)

500:1 (typ.)

Viewing Angle

-89~89 (H); -89~89 (V)

-70~70 (H);-50~60(V)

Max Colors

262K (6bit)

Touch

Projective-capacitive touch

System:

Processor

Freescale Cortex A9 i.MX6 Dual Core 1GHz (* Quad Core)

System Chipset

Freescale i.MX6

System

Memory

1GB LPDDR3 (*2GB LPDDR3)

Storage

16 GB eMMC (default)

mSATA/ Micro SD card

LAN

Dual Broadcom BCM57780 GbE Controller

Operating System:

Android 4.4 (default)

*Linux Kernel 3.0.35, QT 5.4 Browser

Input / Output:

Serial Ports

2 x RS-232 (RS-422/*485)

Memory

1 x Micro SD card

USB Ports

2 x USB 2.0 host

1 x USB OTG

Ethernet

1 x RJ 45-10/100/1000 Mbps (LAN/ PoE)

Speaker

1 x 1 watt speaker

Mechanical Specification:

Cooling System

Fanless design

Mounting

VESA mount (75 x 75mm)

Dimensions

(W x H x D)

263.28 x 171 x 35.7 mm

10.1” S-Series HMI

User Manual

4

Environment:

Operating

Temperature

0 °C to +50 °C

Operating

Humidity

30% to 90% (non-condensing)

IP Rating

Front: IP65 water and dust proof

Rear: IP22

Power Considerations:

Power Input

12 DC in 3-Pin Terminal Block (phoenix type)

Support PoE, require IEEE 802.3at 25W power input

*optional

1.3 Software Support

SDK:

Android Driver Programming Guide

Linux Programming Guide

1.4 Packing List

Carefully remove the box and unpack your HMI device. Please check if all the items listed below

are inside your package. If any of these items are missing or damaged contact us immediately.

1.4.1 Accessories

Standard factory shipment list:

10.1” HMI Device

Power Cord

AC Adapter

Terminal Block 3 pin

External USB cable

Driver CD & User

Manual

VESA Mounting Screws

10.1” S-Series HMI

User Manual

5

1.4.2 Options

Package may include optional accessories based on your order.

1.4.2.1 VESA Desk Stand

Dimensions

Model Name: PCVS-V1

Part Number: 99KK00A0000E

10.1” S-Series HMI

User Manual

6

1.4.2.2 Front Side In-Wall Mount

Model Name: PCFW-V1

Part Number: 99KK00A0000C

Dimensions

10.1” S-Series HMI

User Manual

7

1.5 Appearance

1.5.1 W10FA3S-PCH2AC-PoE

Top View

Front View

Rear View

Bottom View

10.1” S-Series HMI

User Manual

8

1.5.2 W10FA3S-PCH2-PoE / W10FA3S-PCH1-PoE

Top View

Front View

Rear View

Bottom View

La page est en cours de chargement...

Winmate W10FA3S-PCH1-PoE Manuel utilisateur

Ce manuel convient également à

Winmate W10FA3S-PCH1-PoE Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents