Emac NR10AR13 Guide d'installation

Taper
Guide d'installation

Ce manuel convient également à

TECHNICAL FILE
R03.001_23/09/2013
Prole designed as a ooring separator made of matt silver
anodized aluminium. Its at design makes it perfect to integrate in
any environment, facilitanting a soft and controlled transition. To
be installed with common adhesives ush to the ooring once it is
nished.
Novosepara 10
Aluminium
Material: Aluminium
Length: 1 / 2,5 m (8ft2in / 3ft2in)
Applications
General Features
Page 1 of 2
Novosepara 10 aluminium is a prole to be installed as a ooring separator or as a cover plate for small
expansion joints.
Materials
Technical Features
Reference Prole width (a):
NS10AL40PL 40 mm (1 9/16”)
Aluminium
* Indicate the desired length between available
Alloy: 6063 (AA and ASTM)
L-3441 (UNE 38-301-89)
Fire resistance: M0 (UNE 23-727-90)
Abrasion resistance*: Very good
Lightfastness*: Excellent
Appearance and color*: EN 12373-1
Novosepara aluminium is a prole made by extrusion of aluminium. These proles have been anodized,
improving mainly by this process their corrosion and mechanical resistance and their appearance.. The
anodized applied, has the quality seal “Qualanod” which guarantees the quality of the process and the
resulting proles. This seal regulates several tests: appearance and color, thickness measurements,
sealing and impregnation control, abrasion resistance, lightfastness, acetic saline chamber and nitric
acid immersion.
The aluminium is a material with excellent chemical, physical and mechanical properties. It is lightweight,
tough, ductile, malleable and highly durable.
TECHNICAL FILE
R03.001_23/09/2013
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in [email protected].
Technical information
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Novosepara 10 Aluminium
Novosepara 10 aluminium is to be easily installed once the ooring is nished.
1. Clean the surface to install the Novosepara 10 and ensure the prole is in good condition and free
from dust
2. Place the prole on the joint and put pressure to get an optimal adhesion.
3. Clean the possible leftover and let dry.
Installation
Cleaning and maintenance
Indoors Floorings
Page 2 of 2
Outdoors
The product must be cleaned periodically with a soft mop. If you use a neutral liquid cleaner, you must
rinse the prole with cold water and dry it to remove the humidity excess. The persistent dirtiness can
be removed by using cleaning approved agents lightly abrasive or a grid covered with polished powder
neutral.
Steel wool, abrasive cleaners, souring products as well as strong acids (hydrochloric and
perchloric),strong bases (caustic soda or ammonia) or carbonated solutions are not recommended.
Citric acid is neither recommended because disolves the protective layer of the surface of aluminium.
Waxes, petrolatum, lanolin or similar substances are not appropriate. Solvents containing haloalkanes
(hydrouoroether and chlorinated solvents) and curing accelerators containing chlorides should not be
used (use special accelerators free of chlorides).
  • Page 1 1
  • Page 2 2

Emac NR10AR13 Guide d'installation

Taper
Guide d'installation
Ce manuel convient également à

dans d''autres langues