Pioneer BCS-303 Le manuel du propriétaire

ENGLISH

FRANÇAIS

DEUTSCH ITALIANO ESPAÑOL

NEDERLANDS

P/NO: MFL65220804

BCS-707

XV-BD707

S-BD707T

S-BD707SW

BCS-303

XV-BD707

S-BD303

HB985-DB.BDEUPPK_ENG.indd 1HB985-DB.BDEUPPK_ENG.indd 1 2010-05-14  1:41:212010-05-14  1:41:21

2 Safety Information

Safety Information

1

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This lightning  ash with arrowhead

symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsulated

dangerous voltage within the

product’s enclosure that may be of

su cient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

Cautions and Warnings

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

WARNING: Do not install this equipment in a

con ned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over heating. The

openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

CAUTION: This product is a class 1 laser product

classi ed under the Safety of laser products,

IEC60825-1:2007. To ensure proper use of this

product, please read this owner’s manual carefully

and retain it for future reference. Shall the unit

require maintenance, contact an authorized service

centre.

Use of controls, adjustments or the performance of

procedures other than those speci ed herein may

result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try

to open the enclosure. Visible laser radiation when

open. DO NOT STARE INTO BEAM.

1

Safety Information

HB985-DB.BDEUPPK_ENG.indd 2HB985-DB.BDEUPPK_ENG.indd 2 2010-05-14  1:41:402010-05-14  1:41:40

Safety Information

3Safety Information

1

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a

dedicated circuit;

That is, a single outlet circuit which powers only

that appliance and has no additional outlets or

branch circuits. Check the speci cation page of this

owner’s manual to be certain. Do not overload wall

outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or  re. Periodically examine the cord of your

appliance, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an exact

replacement part by an authorized service centre.

Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed

in a door, or walked upon. Pay particular attention

to plugs, wall outlets, and the point where the cord

exits the appliance. To disconnect power from the

mains, pull out the mains cord plug. When installing

the product, ensure that the plug is easily accessible.

PIONEER hereby declares that this/

these product(s) is/are in compliance

with the essential requirements and

other relevant provisions of Directive

2004/108/EC, 2006/95/EC, and

2009/125/EC.

WARNING: To prevent a  re hazard, do not place any

naked  ame sources (such as a lighted candle) on

the equipment.

This device is equipped with a portable battery or

accumulator.

Safety way to remove the battery or the battery

from the equipment: Remove the old battery

or battery pack, follow the steps in reverse order

than the assembly. To prevent contamination of

the environment and bring on possible threat

to human and animal health, the old battery or

the battery put it in the appropriate container at

designated collection points. Do not dispose of

batteries or battery together with other waste.

It is recommended that you use local, free

reimbursement systems batteries and accumulators.

The battery shall not be exposed to excessive heat

such as sunshine,  re or the like.

CAUTION: The apparatus shall not be exposed to

water (dripping or splashing) and no objects  lled

with liquids, such as vases, shall be placed on the

apparatus.

HB985-DB.BDEUPPK_ENG.indd 3HB985-DB.BDEUPPK_ENG.indd 3 2010-05-14  1:41:412010-05-14  1:41:41

4 Safety Information

Safety Information

1

Information for users on collection and disposal

of old equipment and used batteries

These symbols on the products, packaging, and/or

accompanying documents mean that used electrical

and electronic products and batteries should not be

mixed with general household waste.

For proper treatment, recovery and recycling of old

products and used batteries, please take them to

applicable collection points in accordance with your

national legislation.

By disposing of these products and batteries

correctly, you will help to save valuable resources

and prevent any potential negative e ects on human

health and the environment which could otherwise

arise from inappropriate waste handling.

For more information about collection and recycling

of old products and batteries, please contact your

local municipality, your waste disposal service or the

point of sale where you purchased the items.

These symbols are only valid in the European

Union.

For countries outside the European Union:

If you wish to discard these items, please contact

your local authorities or dealer and ask for the correct

method of disposal.

Notes on Copyrights

• Because AACS (Advanced Access Content System)

is approved as content protection system for BD

format, similar to use of CSS (Content Scramble

System) for DVD format, certain restrictions are

imposed on playback, analogue signal output,

etc., of AACS protected contents. The operation of

this product and restrictions on this product may

vary depending on your time of purchase as those

restrictions may be adopted and/or changed by

AACS after the production of this product.

• Furthermore, BD-ROM Mark and BD+ are

additionally used as content protection systems

for BD format, which imposes certain restrictions

including playback restrictions for BD-ROM

Mark and/or BD+ protected contents. To obtain

additional information on AACS, BD-ROM Mark,

BD+, or this product, please contact an authorized

Customer Service Centre.

• Many BD-ROM/DVD discs are encoded with

copy protection. Because of this, you should only

connect your player directly to your TV, not to a

VCR. Connecting to a VCR results in a distorted

picture from copy-protected discs.

• This product incorporates copyright protection

technology that is protected by U.S. patents

and other intellectual property rights. Use of

this copyright protection technology must be

authorized by Rovi Corporation, and is intended

for home and other limited viewing uses only

unless otherwise authorized by Rovi Corporation.

Reverse engineering or disassembly is prohibited.

• Under the U.S. Copyright laws and Copyright

laws of other countries, unauthorized recording,

use, display, distribution, or revision of television

programmes, videotapes, BD-ROM discs, DVDs,

CDs and other materials may subject you to civil

and/or criminal liability.

Symbol examples

for batteries

Pb

HB985-DB.BDEUPPK_ENG.indd 4HB985-DB.BDEUPPK_ENG.indd 4 2010-05-14  1:41:412010-05-14  1:41:41

Safety Information

5Safety Information

1

Important Notice for TV colour system

The colour system of this player di ers according to

currently playing discs.

For example, when the player plays the disc recorded

in the NTSC colour system, the image is output as an

NTSC signal.

Only the multi system colour TV can receive all

signals output from the player.

• If you have a PAL colour system TV, you will see

just distorted images when using discs or video

contents recorded in NTSC.

• The multi system colour TV changes the colour

system automatically according to input signals.

In case that the colour system is not changed

automatically, turn it o and then on to see

normal images on screen.

• Even if the disc recorded in NTSC colour system

are well displayed on your TV, these may not be

recorded correctly on your recorder.

HB985-DB.BDEUPPK_ENG.indd 5HB985-DB.BDEUPPK_ENG.indd 5 2010-05-14  1:41:412010-05-14  1:41:41

6

Contents

1

Safety Information

2 Cautions and Warnings

2

Preparation

8 Introduction

8 About the “ ” Symbol

Display

8 Symbols Used in this Manual

9 Supplied Accessories

10 Playable Discs

11 File compatibility

12 Regional Code

12 AVCHD (Advanced Video

Codec High De nition)

12 Certain System Requirements

12 Compatibility Notes

13 Remote control

14 Front panel

15 Rear panel

3

Installation

16 Assemble the speakers

16 Speaker Setup for BCS-707

18 Speaker Setup for BCS-303

19 Wall mounting the centre speaker

19 Additional notes on speaker

20 Positioning the system

21 Connecting to Your TV

21 HDMI Connection

22 Component Video

Connection

23 Video Connection

23 Resolution Setting

24 Antenna connection

24 Connections with external device

24 AUX Connection

25 PORTABLE IN connection

25 OPTICAL IN 1/2 connection

26 Bluetooth® connection

28 Connecting to your Home Network

29 Network Setup

31 USB device connection

32 Settings

32 Adjust the Setup Settings

33 [DISPLAY] Menu

34 [LANGUAGE] Menu

35 [AUDIO] Menu

36 [LOCK] Menu

37 [NETWORK] Menu

37 [OTHERS] Menu

39 Sound E ect

HB985-DB.BDEUPPK_ENG.indd 6HB985-DB.BDEUPPK_ENG.indd 6 2010-05-14  1:41:412010-05-14  1:41:41

7

1

2

3

4

5

6

7

8

4

Operation

40 General Playback

42 Advanced Playback

44 On-Screen display

48 Enjoying BD-LIVE

49 Playing movie  le and VR discs

51 Viewing a photo

53 Listening to music

56 Playing the iPod

58 Radio Operations

59 Playing content via your home

network

5

Maintenance

63 Notes on Discs

63 Handling the Unit

6

Troubleshooting

64 General

65 Picture

65 Sound

66 Network

7

Appendix

67 Controlling a TV with the Supplied

Remote Control

68 Area Code List

69 Language code List

70 Video output resolution

71 Trademarks and Licences

73 Speci cations

75 Open source software notice

HB985-DB.BDEUPPK_ENG.indd 7HB985-DB.BDEUPPK_ENG.indd 7 2010-05-14  1:41:412010-05-14  1:41:41

8 Preparation

Preparation

2

Preparation

Introduction

About the “ ” Symbol Display

“ ” may appear on your TV display during

operation and indicates that the function

explained in this owner’s manual is not

available on that speci c media.

Symbols Used in this Manual

NOTE

Indicates special notes and operating features.

CAUTION

Indicate cautions for preventing possible

damages from abuse.

A section whose title has one of the following

symbols are applicable only to the disc

represented by the symbol.

BD

BD-ROM disc

DVD

DVD-Video, DVD±R/RW in

Video mode or VR mode

and  nalized

AVCHD

DVD±R/RW in AVCHD

format

ACD

Audio CDs

MOVIE

Movie  les

MUSIC

Music  les

PHOTO

Photo  les

HB985-DB.BDEUPPK_ENG.indd 8HB985-DB.BDEUPPK_ENG.indd 8 2010-05-14  1:41:412010-05-14  1:41:41

9Preparation

2

Preparation

Supplied Accessories

Video cable (1) Remote control (1)

Battery (1) FM antenna (1)

iPod cradle (1)

Accessaries of speaker box

(S-BD707T)

Colour-coded

Speaker cables (5)

Screws (12)

Speaker stand bases

(4)

Small non-skid pads

(1)

Middle non-skid

pads (1)

Accessaries of speaker box

(S-BD707SW)

Speaker cable (1) Large non-skid pads

(1)

Accessaries of speaker box

(S-BD303)

Colour-coded

Speaker cables (6)

Small non-skid pads

(1)

Large non-skid pads

(1)

HB985-DB.BDEUPPK_ENG.indd 9HB985-DB.BDEUPPK_ENG.indd 9 2010-05-14  1:41:412010-05-14  1:41:41

10 Preparation

Preparation

2

Playable Discs

Blu-ray Disc

- Discs such as movies that can

be p

urchased or rented.

- BD-R/RE discs that contain

Movie, Music or Photo  les.

DVD-VIDEO

8 / 12 cm disc

Discs such as movies that can be

purchased or rented.

DVD±R

8 / 12 cm disc

- Video mode and  nalized only

- Supports the dual layer disc

also

- Finalized AVCHD format

- DVD±R discs that contain

Movie, Music or Photo  les

DVD-RW

8 / 12 cm disc

- VR mode, Video mode and

 nalized only

- Finalized AVCHD format

- DVD-RW discs that contain

Movie, Music or Photo  les.

DVD+RW

8 / 12 cm disc

- Video mode and  nalized only

- AVCHD format

- Finalized AVCHD format

- DVD+RW discs that contain

Movie, Music or Photo  les.

Audio CD

8 / 12 cm disc

CD-R/RW

8 / 12 cm disc

- CD-R/RW discs that contain

audio titles, Movie, Music or

Photo  les.

NOTE

• Depending on the conditions of the recording

equipment or the CD-R/RW (or DVD±R/RW)

disc itself, some CD-R/RW (or DVD±R/RW) discs

cannot be played on the unit.

• Depending on the recording software & the

 nalization, some recorded discs (CD-R/RW,

DVD±R/RW, BD-R/RE) may not be playable.

• BD-R/RE, DVD±R/RW and CD-R/RW discs

recorded using a personal computer or a DVD or

CD Recorder may not play if the disc is damaged

or dirty, or if there is dirt or condensation on the

player’s lens.

• If you record a disc using a personal computer,

even if it is recorded in a compatible format,

there are cases in which it may not play because

of the settings of the application software used

to create the disc. (Check with the software

publisher for more detailed information.)

• This player requires discs and recordings to meet

certain technical standards in order to achieve

optimal playback quality.

• Pre-recorded DVDs are automatically set to

these standards. There are many di erent

types of recordable disc formats (including

CD-R containing MP3 or WMA  les) and these

require certain pre-existing conditions to ensure

compatible playback.

• Customers should note that permission is

required in order to download MP3 / WMA  les

and music from the Internet. Our company has

no right to grant such permission. Permission

should always be sought from the copyright

owner.

HB985-DB.BDEUPPK_ENG.indd 10HB985-DB.BDEUPPK_ENG.indd 10 2010-05-14  1:41:422010-05-14  1:41:42

11Preparation

2

Preparation

File compatibility

Overall

Available File extensions:

“.jpg”, “.jpeg”, “.png”, “.avi”, “.divx”, “.mpg”, “.mpeg”,

“.mkv”, “.mp4”, “.mp3”, “.wma”, “.wav”

• Available  le extensions di er depending

on the DLNA servers.

• Some “.wav”  les are not supported on this

player.

• The  le name is limited to 180 characters.

• Depending on the size and number of the

 les, it may take several minutes to read the

contents on the media.

Maximum Files/Folder: Less than 2 000 (total

number of  les and folders)

CD-R/RW, DVD±R/RW, BD-R/RE Format:

ISO 9660+JOLIET, UDF and UDF Bridge format

MOVIE

Available resolution size:

1 920 x 1 080 (W x H) pixels

Playable subtitle: SubRip (.srt / .txt), SAMI

(.smi), SubStation Alpha (.ssa/.txt), MicroDVD

(.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub),

SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD

Subtitle System (.txt)

• VobSub (.sub) is not available in the

[Home Link] feature.

Playable Codec format: “DIVX3.xx”, “DIVX4.

xx”, “DIVX5.xx”, “XVID”, “DIVX6.xx” (Standard

playback only), H.264/MPEG-4 AVC, MPEG1 SS,

MPEG2 PS, MPEG2 TS

Playable Audio format: “Dolby Digital”, “DTS”,

“MP3”, “WMA”, “AAC”, “AC3”

• Not all the WMA and AAC Audio formats are

compatible with this unit.

Sampling frequency:

between 32 kHz to 48 kHz (WMA),

between 16 kHz to 48 kHz (MP3)

Bit rate:

between 20 kbps to 320 kbps (WMA),

between 32 kbps to 320 kbps (MP3)

NOTE

• HD movie  les contained on the CD or USB

1.0/1.1 may not played properly. BD, DVD or USB

2.0 are recommended to play back HD movie

 les.

• This player supports H.264/MPEG-4 AVC pro le

Main, High at Level 4.1. For a  le with higher

level, the warning message will appear on the

screen.

• This player does not support the  les that are

recorded with GMC

*

1

or Qpel

*

2

. Those are video

encoding techniques in MPEG4 standard, like

DivX or XVID have.

*1 GMC – Global Motion Compensation

*2 Qpel – Quarter pixel

MUSIC

Sampling frequency:

between 8 kHz to 48 KHz (WMA),

between 11 kHz to 48 kHz (MP3)

Bit rate:

between 8 kbps to 320 kbps (WMA, MP3),

NOTE

• This unit cannot support the ID3 Tag embedded

MP3  le.

• The total playback time indicated on the screen

may not be correct for VBR  les.

PHOTO

Recommended size:

Less than 4,000 x 3,000 x 24 bit/pixel

Less than 3,000 x 3,000 x 32 bit/pixel

Less than 4 MByte/ le

• Progressive and lossless compression photo

image  les are not supported.

HB985-DB.BDEUPPK_ENG.indd 11HB985-DB.BDEUPPK_ENG.indd 11 2010-05-14  1:41:422010-05-14  1:41:42

12 Preparation

Preparation

2

Regional Code

This unit has a regional code printed on the

rear of the unit. This unit can play only BD-ROM

or DVD discs labeled same as the rear of the

unit or “ALL”.

AVCHD (Advanced Video Codec

High De nition)

• This player can playback AVCHD format

discs. These discs are normally recorded and

used in camcorders.

• The AVCHD format is a high de nition

digital video camera format.

• The MPEG-4 AVC/H.264 format is capable

of compressing images at higher e ciency

than that of the conventional image

compressing format.

• Some AVCHD discs use the “x.v.Colour”

format.

• This player can playback AVCHD discs using

“x.v.Colour” format.

• Some AVCHD format discs may not play,

depending on the recording condition.

• AVCHD format discs need to be  nalized.

• “x.v.Colour” o ers a wider colour range than

normal DVD camcorder discs.

Certain System Requirements

For high de nition video playback:

• High de nition display that has

COMPONENT or HDMI input jacks.

• BD-ROM disc with high de nition content.

• HDMI or HDCP capable DVI input on your

display device is required for some content

(as speci ed by disc authors).

• For up-conversion of standard de nition

DVD, a HDMI or HDCP capable DVI input

on your display device is required for copy

protected content.

Compatibility Notes

• Because BD-ROM is a new format,

certain disc, digital connection and other

compatibility issues are possible. If you

experience compatibility problems, please

contact an authorized Customer Service

Centre.

• Viewing high-de nition content and up-

converting standard DVD content may

require a HDMI-capable input or HDCP-

capable DVI input on your display device.

• Some BD-ROM and DVD discs may restrict

the use of some operation commands or

features.

• You can use a USB device that is used

to store some disc related information,

including downloaded on-line content. The

disc you are using will control how long this

information is retained.

HB985-DB.BDEUPPK_ENG.indd 12HB985-DB.BDEUPPK_ENG.indd 12 2010-05-14  1:41:422010-05-14  1:41:42

13Preparation

2

Preparation

Remote control

1

2

3

• • • • • • • • •

a

• • • • • • • • •

1

(STANDBY/ON): Switches the

player ON or OFF.

Z

OPEN/CLOSE: Opens and closes

the disc tray.

INPUT/TUNER: Changes input

mode.

BT AUDIO: Changes input mode to

BT AUDIO directly.

OPTICAL: Changes input mode to

optical directly.

DISPLAY: Displays or exits On-

Screen Display.

HOME MENU: Displays or exits

the [Home Menu].

MENU: Accesses the menu on a

disc.

Direction buttons: Selects an

option in the menu.

ENTER: Acknowledges menu

selection.

TUNE (+/-): Tunes in the desired

radio station.

PRESET: Selects programme of

Radio.

• • • • • • • • •

b

• • • • • • • • •

O

RETURN: Exits the menu or

resumes playback.

POPUP/ TOP MENU: Displays the

DVD title menu or BD-ROM’s pop-

up menu, if available.

x

STOP: Stops playback.

B

PLAY: Starts playback.

X

PAUSE/STEP: Pauses playback

.

/

>

SKIP: Goes to the next

or previous chapter / track /  le.

m

/

M

SCAN: Searches

backward or forward.

SPK LEVEL: Sets the sound level of

desired speaker.

z

USB REC: Records an audio CD.

MUTE: Mute the unit.

SOUND: Selects a sound e ect

mode.

VOL +/- : Adjusts speaker volume.

• • • • • • • • •

c

• • • • • • • • •

0-9 numerical buttons: Selects

numbered options in a menu.

MARKER: Marks any point during

playback.

SEARCH: Displays or exits the

search menu.

REPEAT: Repeats a desired

section or sequence.

CLEAR: Removes a mark on the

search menu or a number when

setting the password.

DIMMER: Dims the light on the

unit.

ZOOM: Accesses the zoom menu.

Coloured (A, B, C, D) buttons: Use

to navigate on menus.

- A button (RDS): Radio Data

System.

- B button (PTY): Views the

programme type of the RDS.

- C button (PTY SEARCH):

Searches programme type.

- D button: Selects MONO or

STEREO in FM mode.

TV Control Buttons: See page 67.

SLEEP: Sets a certain period of time

after which the unit will switch to

o .

Battery Installation

Remove the battery cover

on the rear of the Remote

Control, and insert a R03 (size

AAA) battery with and

matched correctly.

HB985-DB.BDEUPPK_ENG.indd 13HB985-DB.BDEUPPK_ENG.indd 13 2010-05-14  1:41:422010-05-14  1:41:42

14 Preparation

Preparation

2

Front panel

a

Disc Tray

b

Operation buttons

1

STANDBY/ON Button

Z

(OPEN/CLOSE)

FUNCTION

Changes the input source or function

B

/

X

(PLAY / PAUSE)

x

(STOP)

.

/

>

(SKIP)

- TUNE + (Radio tuning)

c

Remote sensor

d

Display window

e

PORTABLE IN

f

USB Port

g

Volume control

1

2

3 4 5 6 7

HB985-DB.BDEUPPK_ENG.indd 14HB985-DB.BDEUPPK_ENG.indd 14 2010-05-14  1:41:432010-05-14  1:41:43

15Preparation

2

Preparation

a

AC Power cord

Plug into the power source.

b

Speakers connectors

c

Cooling Fan

d

Antenna Connector

e

VIDEO OUT

f

AUX (L/R) INPUT

g

COMPONENT VIDEO (Y P

B

P

R

)

OUTPUT (PROGRESSIVE SCAN)

h

OPTICAL IN 1(TV) / 2

i

iPod (24 pin)

Connect to the furnished iPod cradle.

j

HDMI OUT (type A, Version 1.3)

Connect to TV with HDMI inputs.

k

LAN port

Rear panel

1 2 3 4 5

6 7 8 9 10 11

HB985-DB.BDEUPPK_ENG.indd 15HB985-DB.BDEUPPK_ENG.indd 15 2010-05-14  1:41:432010-05-14  1:41:43

16 Installation

Installation

3

Assemble the

speakers

Speaker Setup for BCS-707

Preparing the speakers

1. Attach the non-skid pads to the base of

each speaker stand bases, the subwoofer

and the centre speaker.

For speaker stand bases:

Use the supplied adhesive to attach four

middle pads to the base (bottom) of each

speaker stand base.

middle non-skid pads

For subwoofer:

Use the supplied adhesive to attach four

large pads to the base of subwoofer.

large non-skid pads

For centre speaker:

Use the supplied adhesive to attach four

small pads to the base of centre speaker.

small non-skid pads

2. Attach the speaker stand bases to the stems

using the screws provided.

Once you have aligned the stem and base,

secure with the small screws at the points

shown below. Note that the speaker should

face in the direction of the base of the

isosceles triangle.

Rear

Front

3

Installation

HB985-DB.BDEUPPK_ENG.indd 16HB985-DB.BDEUPPK_ENG.indd 16 2010-05-14  1:41:432010-05-14  1:41:43

17Installation

3

Installation

3. Connect the wires to the player.

Connect the white wire with gray line into

(+) side and the other wire into (–) side. To

connect the cable to the player, press each

plastic  nger pad to open the connection

terminal. Insert the wire and release the

 nger pad.

CAUTION

• Do not connect any speakers other than those

supplied to this system.

• Do not connect the supplied speakers to any

ampli er other than the one supplied with this

system. Connection to any other ampli er may

result in malfunction or  re.

Securing your front and surround

speakers

Secure each of the front and surround speakers

using the plastic catch provided. Screw two

supporting hooks into the wall behind the

speaker. Pass a thick cord around the hooks

and through the plastic catch so that the

speaker is stabilized (make sure to test that

it supports the weight of the speaker). After

installing, make sure the speaker is securely

 xed.

thick cord

Plastic catch

CAUTION

• The plastic catch is not a mounting  xture, and

the speaker should not be hung directly from

the wall using this catch. Always use a cord

when stabilizing the speaker.

• Pioneer disclaims all responsibility for any

losses or damage resulting from improper

assembly, installation, insu cient strength of the

installation materials, misuse, or natural disasters.

• When placing this unit, ensure that it is  rmly

secured and avoid areas where it may be likely

to fall and cause injury in the event of a natural

disaster (such as an earthquake).

Coloured (+)

HB985-DB.BDEUPPK_ENG.indd 17HB985-DB.BDEUPPK_ENG.indd 17 2010-05-14  1:41:442010-05-14  1:41:44

18 Installation

Installation

3

Speaker Setup for BCS-303

Preparing the speakers

1. Attach the non-skid pads to the base of

each speaker.

For speaker stand bases:

Use the supplied adhesive to attach four

middle pads to the base (bottom) of each

speaker stand base.

small non-skid pads

For subwoofer:

Use the supplied adhesive to attach four

large pads to the base of subwoofer.

large non-skid pads

For centre speaker:

Use the supplied adhesive to attach four

small pads to the base of centre speaker.

small non-skid pads

2. Connect the wires to the player.

Connect the white wire with gray line into

(+) side and the other wire into (–) side. To

connect the cable to the player, press each

plastic  nger pad to open the connection

terminal. Insert the wire and release the

 nger pad.

Coloured (+)

HB985-DB.BDEUPPK_ENG.indd 18HB985-DB.BDEUPPK_ENG.indd 18 2010-05-14  1:41:442010-05-14  1:41:44

19Installation

3

Installation

Wall mounting the

centre speaker

The centre speaker have a mounting hole

which can be used to mount the speaker on

the wall.

Before mounting

Remember that the speaker system is heavy

and that its weight could cause the screws

to work loose, or the wall material to fail to

support it, resulting in the speaker falling. Make

sure that the wall you intend to mount the

speakers on is strong enough to support them.

Do not mount on plywood or soft surface

walls.

Mounting screws are not supplied. Use screws

suitable for the wall material and support the

weight of the speaker.

CAUTION

• If you are unsure of the qualities and strength of

the wall, consult a professional for advice.

• Pioneer is not responsible for any accidents or

damage that result from improper installation.

5 mm

10 mm

5 mm to 7 mm

Mounting screw

(not supplied)

Additional notes on

speaker

Install the main front left and right speakers at

an equal distance from the TV.

Precautions:

Make sure that all the bare speaker wire is

twisted together and inserted fully into the

speaker terminal. If any of the bare speaker

wire touches the back panel it may cause the

power to cut o as a safety measure.

The front, centre and surround speakers

supplied with this system are magnetically

shielded. However, depending on the

installation location, colour distortion may

occur if the speaker is installed extremely

close to the screen of a television set. If this

case happens, turn the power switch of the

television set OFF, and turn it ON after 15 min.

to 30 min. If the problem persists, place the

speaker system away from the television set.

The subwoofer is not magnetically shielded

and so should not be placed near a TV or

monitor. Magnetic storage media (such as

 oppy discs and tape or video cassettes)

should also not be kept close to the subwoofer.

Do not attach the front/surround speakers and

subwoofer to a wall or ceiling. They may fall o

and cause injury.

HB985-DB.BDEUPPK_ENG.indd 19HB985-DB.BDEUPPK_ENG.indd 19 2010-05-14  1:41:442010-05-14  1:41:44

20 Installation

Installation

3

Positioning the system

The following illustration shows an example

of positioning the system. Note that the

illustrations in these instructions di er from the

actual unit for explanation purposes.

For the best possible surround sound, all the

speakers other than the subwoofer should be

placed at the same distance from the listening

position (

A

).

A

B

D

E

F

A

G

C

A

Front left speaker (L)/

B

Front right speaker (R):

Place the front speakers to the sides of the

monitor or screen and as  ush with the screen

surface as possible.

C

Centre speaker:

Place the centre speaker above or below the

monitor or screen.

D

Surround left speaker (L)/

E

Surround right speaker (R):

Place these speakers behind your listening

position, facing slightly inwards.

F

Subwoofer:

The position of the subwoofer is not so

critical, because low bass sounds are not

highly directional. But it is better to place

the subwoofer near the front speakers. Turn

it slightly toward the centre of the room to

reduce the wall re ections.

G

Unit

CAUTION

• Be careful to make sure children do not put their

hands or any objects into the *subwoofer duct.

*subwoofer duct: A hole for plentiful bass sound

on subwoofer cabinet (enclosure).

• Place the centre speaker at a safe distance from

the child’s reach.

Otherwise it may result in the speaker falling

down and causing personal injury and/or

property damage.

• The speakers contain magnet parts, so colour

irregularity may occur on the TV screen or PC

monitor screen. Please use the speakers away

from the TV screen or PC monitor screen.

HB985-DB.BDEUPPK_ENG.indd 20HB985-DB.BDEUPPK_ENG.indd 20 2010-05-14  1:41:452010-05-14  1:41:45

La page charge ...

Pioneer BCS-303 Le manuel du propriétaire

Ce manuel convient également à

Pioneer BCS-303 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents