Jenn-Air JDS1750FB Mode d'emploi

Marque: Jenn-Air

Modèle: JDS1750FB

Catégorie: Cuisinières

Taper: Mode d'emploi

THANK YOU for purchasing this high-quality product. Register your range at www.jennair.com. In Canada, register your range at

www.jennair.ca.

For future reference, please make a note of your product model and serial numbers. These can be found on the label located on the oven

frame behind the top-right side of the oven door.

Model Number______________________________________________ Serial Number_______________________________________________

Para una versión de estas instrucciones en español, visite www.jennair.com.

Deberá tener a mano el número de modelo y de serie, que están ubicados en el marco del horno, detrás del lado derecho superior

de la puerta del horno.

Table of Contents

W10896668A

RANGE SAFETY .............................................................................2

The Anti-Tip Bracket ....................................................................3

KEY USAGE TIPS ...........................................................................5

AquaLift

Self-Cleaning Technology ............................................5

Surface Temperatures ..................................................................5

Preheating ....................................................................................5

Surface Burners ...........................................................................5

FEATURE GUIDE ............................................................................6

Electronic Oven Controls .............................................................8

COOKTOP .....................................................................................10

Surface Burners .........................................................................10

Surface Grates ...........................................................................11

Burner Size .................................................................................11

Griddle ........................................................................................12

Cookware ...................................................................................12

Home Canning ...........................................................................13

OVEN .............................................................................................13

Aluminum Foil .............................................................................13

Positioning Racks and Bakeware ..............................................13

Roll-Out Rack .............................................................................14

Oven Vent ...................................................................................15

Sabbath Mode............................................................................15

Baking and Roasting ..................................................................15

Broiling........................................................................................15

Convection Cooking ..................................................................16

Prooﬁng Bread ...........................................................................16

Favorite .......................................................................................16

Cook Time ..................................................................................17

Oven Light ..................................................................................17

RANGE CARE ...............................................................................18

Clean Cycle ................................................................................18

General Cleaning ........................................................................19

TROUBLESHOOTING ..................................................................21

ACCESSORIES .............................................................................23

WARRANTY ..................................................................................24

User Guide

Dual Fuel Downdraft Range

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

WARNING: Gas leaks cannot always be detected by smell.

Gas suppliers recommend that you use a gas detector approved by UL or CSA.

For more information, contact your gas supplier.

If a gas leak is detected, follow the “What to do if you smell gas” instructions.

WARNING: If the information in this manual is not followed exactly, a fire or explosion

may result causing property damage, personal injury or death.

– Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this

or any other appliance.

– WHAT TO DO IF YOU SMELL GAS:

•

Do not try to light any appliance.

•

Do not touch any electrical switch.

•

Do not use any phone in your building.

•

Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

•

If you cannot reach your gas supplier, call the fire department.

– Installation and service must be performed by a qualified installer, service agency or

the gas supplier.

Range Safety

The Anti-Tip Bracket

The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without having

the anti-tip bracket fastened down properly.

Tip Over Hazard

A child or adult can tip the range and be killed.

Verify the anti-tip bracket has been properly installed and engaged per installation instructions.

Re-engage anti-tip bracket if range is moved.

Do not operate range without anti-tip bracket installed and engaged.

Failure to follow these instructions can result in death or serious burns to children and adults.

To verify the anti-tip bracket is installed and engaged:

• Slide range forward.

• Look for the anti-tip bracket securely attached to floor or wall.

• Slide range back so rear range foot is under anti-tip bracket.

• See installation instructions for details.

WARNING

Anti-Tip

Bracket

Range Foot

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock, injury to

persons, or damage when using the range, follow basic

precautions, including the following:

■ WARNING: TO REDUCE THE RISK OF TIPPING OF THE

RANGE, THE RANGE MUST BE SECURED BY PROPERLY

INSTALLED ANTI-TIP DEVICES. TO CHECK IF THE DEVICES

ARE INSTALLED PROPERLY, SLIDE RANGE FORWARD,

LOOK FOR ANTI-TIP BRACKET SECURELY ATTACHED TO

FLOOR OR WALL, AND SLIDE RANGE BACK SO REAR

RANGE FOOT IS UNDER ANTI-TIP BRACKET.

■ WARNING:

NEVER use this appliance as a space heater to

heat or warm the room. Doing so may result in carbon monoxide

poisoning and overheating of the oven.

■

WARNING:

NEVER cover any slots, holes or passages in the

oven bottom or cover an entire rack with materials such as

aluminum foil. Doing so blocks air flow through the oven and

may cause carbon monoxide poisoning. Aluminum foil linings

may also trap heat, causing a fire hazard.

■ CAUTION:

Do not store items of interest to children in

cabinets above a range or on the backguard of a range –

children climbing on the range to reach items could be seriously

injured.

■

Do Not Leave Children Alone – Children should not be left alone

or unattended in area where the range is in use. They should

never be allowed to sit or stand on any part of the range.

■

Wear Proper Apparel – Loose-fitting or hanging garments

should never be worn while using the range.

■

User Servicing – Do not repair or replace any part of the range

unless specifically recommended in the manual. All other

servicing should be referred to a qualified technician.

■ Storage in or on the Range – Flammable materials should not

be stored in an oven or near surface units.

■

Do Not Use Water on Grease Fires – Smother fire or flame or

use dry chemical or foam-type extinguisher.

■ Use Only Dry Potholders – Moist or damp potholders on hot

surfaces may result in burns from steam. Do not let potholder

touch hot heating elements. Do not use a towel or other bulky

cloth.

■ DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS –

Surface units may be hot even though they are dark in color.

Areas near surface units may become hot enough to cause

burns. During and after use, do not touch, or let clothing or

other flammable materials contact surface units or areas near

units until they have had sufficient time to cool. Among those

areas are the cooktop and surfaces facing the cooktop.

■ Never Leave Surface Units Unattended at High Heat Settings –

Boilover causes smoking and greasy spillovers

that may ignite.

■ Glazed Cooking Utensils – Only certain types of glass,

glass/ceramic, ceramic, earthenware, or other glazed utensils

are suitable for range-top service without breaking due to the

sudden change in temperature.

■ Utensil Handles Should Be Turned Inward and Not Extend Over

Adjacent Surface Units – To reduce the risk of burns, ignition of

flammable materials, and spillage due to unintentional contact

with the utensil, the handle of a utensil should be positioned so

that it is turned inward, and does not extend over adjacent

surface units.

■ Clean Cooktop With Caution – If a wet sponge or cloth

is used to wipe spills on a hot cooking area, be careful

to avoid steam burn. Some cleaners can produce

noxious fumes if applied to a hot surface.

■ Use Care When Opening Door – Let hot air or steam

escape before removing or replacing food.

■

Do Not Heat Unopened Food Containers – Build-up of

pressure may cause container to burst and result in

injury.

■ Keep Oven Vent Ducts Unobstructed.

■ Placement of Oven Racks – Always place oven racks in

desired location while oven is cool. If rack must be

moved while oven is hot, do not let potholder contact

hot heating element in oven.

■ DO NOT TOUCH HEATING ELEMENTS OR INTERIOR

SURFACES OF OVEN – Heating elements may be hot

even though they are dark in color. Interior surfaces of

an oven become hot enough to cause burns. During

and after use, do not touch, or let clothing or other

flammable materials contact heating elements or interior

surfaces of oven until they have had sufficient time to

cool. Other surfaces of the appliance may become hot

enough to cause burns – among these surfaces are

oven vent openings and surfaces near these openings,

oven doors, and windows of oven doors.

■ Proper Installation – The range, when installed, must be

electrically grounded in accordance with local codes or,

in the absence of local codes, with the National

Electrical Code, ANSI/NFPA 70. In Canada, the range

must be electrically grounded in accordance with

Canadian Electrical Code. Be sure the range is properly

installed and grounded by a qualified technician.

■ Disconnect the electrical supply before servicing the

appliance.

■ Injuries may result from the misuse of appliance doors

or drawers such as

stepping, leaning, or sitting on the

doors or drawers.

■ Maintenance – Keep range area clear and free from

combustible materials, gasoline, and other flammable

vapors and liquids.

■ Top burner flame size should be adjusted so it does not

extend beyond the edge of the cooking utensil.

For self-cleaning ranges –

■ Do Not Clean Door Gasket – The door gasket is

essential for a good seal. Care should be taken not to

rub, damage, or move the gasket.

■ Do Not Use Oven Cleaners – No commercial oven

cleaner or oven liner protective coating of any kind

should be used in or around any part of the oven.

■ Clean Only Parts Listed in Manual.

■ Before Self-Cleaning the Oven – Remove broiler pan

and other utensils. Wipe off all excessive spillage before

initiating the cleaning cycle.

For units with ventilating hood –

■ Clean Ventilating Hoods Frequently – Grease should not

be allowed to accumulate on hood or filter.

■ When flambéing foods under the hood, turn the fan on.

AquaLift

Self-Cleaning Technology

AquaLift

Self-Cleaning Technology is a ﬁrst-of-its-kind cleaning

solution designed to minimize the time, temperature, and odors

that ordinarily come with traditional self-cleaning methods. With

AquaLift

Self-Cleaning Technology, an exclusive coating on the

interior of the oven, is activated with heat and water to release

baked-on soil. To use AquaLift

Self-Cleaning Technology, simply

wipe out loose debris, pour water into the oven bottom, and run

the AquaLift

Self-Cleaning cycle. When the cycle ﬁnishes in under

1 hour at a lower temperature than in traditional self-cleaning

methods, just wipe out the remaining water and loose debris.

See the “Clean Cycle” section for more detailed instructions. For

additional information, frequently asked questions, and videos

on using AquaLift

Self-Cleaning Technology, visit our website at

http://whirlpoolcorp.com/aqualift.

Surface Temperatures

When the range is in use, all range surfaces may become hot,

such as the knobs and oven door.

Baking Drawer (On Some Models)

When the oven is in use, the drawer may become hot. Do not store

plastics, cloth, or other items that could melt or burn in the drawer.

Oven Vent

The oven vent releases hot air and moisture from the oven and

should not be blocked or covered. Do not set plastics, paper, or

other items that could melt or burn near the oven vent.

Preheating

When beginning a Bake, Convect Bake, or Convect Roast cycle,

the oven will begin preheating after Start is pressed. The oven

will take approximately 12 to 15 minutes to reach 350°F (177°C)

with all of the oven racks provided with your oven inside the

oven cavity. Higher temperatures will take longer to preheat. The

preheat cycle rapidly increases the oven temperature. The actual

oven temperature will go above your set temperature to offset

the heat lost when your oven door is opened to insert food. This

ensures that when you place your food in the oven, the oven

will begin at the proper temperature. Insert your food when the

preheat tone sounds. Do not open the door during preheat before

the tone sounds.

Surface Burners

The burner bases and caps must be properly positioned before

cooking. Your range comes with 3 sizes of burners and caps.

Each round burner base is marked with a letter indicating the

burner size. Align the burner bases as shown in the following

illustration:

Align the gas tube opening in the burner base with the oriﬁce

holder on the cooktop and the igniter electrode with the notch

in the burner base.

Place the burner caps on the appropriate burner bases. Each

round burner cap is marked with a letter indicating the burner size.

Burner caps should be level when properly positioned. If burner

caps are not properly positioned, surface burners will not light.

The burner cap should not rock or wobble when properly aligned.

A. Small (S)

B. Large (L)

C. Medium (M)

D. Large (L)

A. Burner cap

B. Gas tube opening

C. Burner base

D. Igniter electrode

E. Oriﬁce holder

Small cap (S) Medium cap (M) Large cap (L)

A. Incorrect

B. Correct

Key Usage Tips

This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Frequently Asked

Questions (FAQs) section of our website at www.jennair.com for more detailed instructions. In Canada, refer to the Customer Service

Section at www.jennair.ca.

WARNING

Food Poisoning Hazard

Do not let food sit for more than one hour before or

after cooking.

Doing so can result in food poisoning or sickness.

Keypad Feature Instructions

OPTIONS/CLOCK Clock

The Clock can use a 12- or 24-hour cycle. See the “Electronic Oven Controls” section.

1. Press OPTIONS/CLOCK until “CLOCK” is displayed.

2. Use the number keypads to set the time of day.

3. Press START to change the time.

4. Press “3” for AM or “6” for PM.

OPTIONS/CLOCK Settings

Enables you to personalize the audible tones and oven operation to suit your needs.

See the “Electronic Oven Controls” section.

LIGHT Oven cavity light

The oven light is controlled by a keypad on the oven control panel. While the oven door

is closed, press LIGHT to turn the light On and Off. When the oven door is opened, the

oven light will automatically come On.

TIMER SET/OFF Oven timer

The Timer can be set in hours or minutes up to 9 hours and 59 minutes.

1. Press TIMER SET/OFF.

2. Press the number keypads to set the length of time in hr-min-min. Leading zeros

do not have to be entered. For example, for 2 minutes, enter “2.”

3. Press TIMER SET/OFF to begin the countdown. If enabled, end-of-cycle tones will

sound at end of countdown.

4. Press TIMER SET/OFF again to cancel the Timer and return to the time of day.

Do not press the Cancel keypad because the oven will turn off.

5. If the Timer is running but not in the display, press TIMER SET/OFF to display the

countdown for 5 seconds.

START Cooking start

The Start keypad begins any oven function. If Start is not pressed within 2 minutes

after pressing a keypad, the function is canceled and the time of day is displayed.

CANCEL Range function

The Cancel keypad stops any function for the appropriate oven or drawer, except

the Clock and Timer.

BAKE Baking and

roasting

1. Press BAKE.

2. Set the desired temperature between 170°F and 500°F (75°C and 260°C) using

the number keypads. The default temperature is 350°F (180°C).

3. Press START.

4. To change the temperature, repeat steps 2 and 3.

5. Press CANCEL when ﬁnished.

BROIL Broiling

1. Press BROIL.

2. Press the number keypads to set the desired temperature.

3. Press START and allow the oven to preheat for 2 minutes.

4. To change the temperature, repeat steps 2 and 3.

5. Position the cookware in the oven, and then close the door.

6. Press CANCEL when ﬁnished.

Feature Guide

Keypad Feature Instructions

MANUAL CONVECT

MODES

Convection

cooking

1. Press MANUAL CONVECT MODES until the desired convection mode appears in

the display.

2. Press START.

3. Press the number keypads to set the desired temperature.

4. Press START.

5. Insert food when prompted.

6. To change the temperature, repeat steps 3 and 4.

7. Press CANCEL when ﬁnished.

AUTO CONVECT

MODES

Convection

cooking

1. Press AUTO CONVECT MODES until the desired convection mode appears in

the display.

2. Press START.

3. Press the number keypads to set the desired temperature.

4. Press START.

5. Press the number keypads to set the desired cook time.

6. Press START.

7. Insert food when prompted.

8. To change the temperature, repeat steps 3 through 6.

9. Press CANCEL when ﬁnished.

KEEP WARM Hold warm

Food must be at serving temperature before placing it in the warmed oven.

1. Press KEEP WARM.

2. Set the desired temperature between 145°F and 190°F (63°C and 88°C) using the

number keypads. The default temperature is 170°F (75°C).

3. Press START.

4. Press CANCEL when ﬁnished.

PROOF Prooﬁng bread

1. Place prepared dough in oven. Press PROOF.

2. Press START.

Let the dough rise until nearly doubled in size. Prooﬁng time may vary depending

on dough type and quantity.

3. Press CANCEL when ﬁnished prooﬁng.

Refer to the “Prooﬁng Bread” section for more information.

FAVORITE Saved favorite

The Favorite keypad stores the oven mode, cook time, and temperature for your favorite

recipe. To save or use favorite, see the “Favorite” section.

DELAY START Delayed start

The Delay Start keypad is used to enter the starting time for an oven function with

a delayed start. Delay Start should not be used for foods such as breads and cakes

because they may not bake properly.

To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.

COOK TIME Timed cooking

Timed cooking allows the oven to be set to turn on at a certain time of day, cook for

a set length of time, and/or shut off automatically.

To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.

AQUALIFT SELF

CLEAN

Clean cycle

See the “Clean Cycle” section.

Control Display

The display will ﬂash when powered up or after a power loss.

Press CANCEL to clear. When the oven is not in use,

the time of day is displayed. If the range is in Energy Save mode,

the display will be blank when not in use.

Tones

Tones are audible signals, indicating the following:

One Tone

■ Valid keypad press

■ Oven is preheated (long tone).

■ Function has been entered.

■ Reminder, repeating each minute after the end-of-cycle tones

Three Tones

■ Invalid keypad press

Four Tones

■ End-of-cycle

Use the Options/Clock keypad to change the tone settings.

Energy Save

The Energy Save mode puts the range into Sleep mode and

reduces energy consumption.

To Activate the Energy Save Mode:

1. Press OPTIONS/CLOCK until “ENERGY SAVE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL to exit and display the time of day.

5. The setting will be activated after 5 minutes.

To Deactivate the Energy Save Mode:

1. Press OPTIONS/CLOCK until “ENERGY SAVE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL to exit and display the time of day.

5. The clock will reappear in the display and the range can be

operated as usual.

Settings

Many features of the oven control can be adjusted to meet your

personal needs. These changes are made using the Options/Clock

keypad.

Use the Options/Clock keypad to scroll through the features that

can be changed. Each press of the Options/Clock keypad will

advance the display to the next setting. After selecting the feature

to be changed, the control will prompt you for the required input.

Then press START or CANCEL to exit and display the time of day.

Details of all of the feature changes are explained in the following

sections.

Press CANCEL to exit Settings.

Clock

The Clock can use a 12- or 24-hour cycle.

1. Press OPTIONS/CLOCK until “CLOCK” is displayed.

2. Use the number keypads to set the time of day.

3. Press START to change the time.

4. Press “3” for AM or “6” for PM.

Fahrenheit and Celsius

The temperature is preset to Fahrenheit but can be changed

to Celsius.

1. Press OPTIONS/CLOCK until “TEMP UNIT” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL to exit and display the

time of day.

Audible Tones Disable

Turns off all tones, including the end-of-cycle tone and keypress

tones. Reminder tones are still active when all tones are disabled.

1. Press OPTIONS/CLOCK until “SOUND” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL to exit and display the

time of day.

Electronic Oven Controls

Keypad Feature Instructions

DOWNDRAFT FAN

HIGH/LOW/AUTO

OFF/OFF

Downdraft fan

Press DOWNDRAFT FAN HIGH or DOWNDRAFT FAN LOW to turn on the Downdraft Fan

at the desired speed.

Press DOWNDRAFT FAN OFF to turn off the Downdraft Fan immediately.

Press DOWNDRAFT FAN AUTO OFF to automatically turn off the Downdraft Fan after a

set time. To add 15 minutes to the set time, up to 1 hour, press DOWNDRAFT FAN AUTO

OFF again.

If the Downdraft Fan is Off, pressing Downdraft Fan Auto Off will turn the Downdraft Fan

On at High speed. If the Downdraft Fan is already on, pressing Downdraft Fan Auto Off

will not change the Downdraft Fan speed.

START

(Hold 3 Sec to Lock)

Oven control

lockout

1. Check that the oven is OFF.

2. Press and hold START (Hold 3 Sec to Lock) for 3 seconds.

3. A tone will sound, and “Control Locked” will scroll, and then “Locked” will be displayed.

4. Repeat to unlock. No keypads will function with the controls locked. The cooktop

functions are not affected by the oven control lockout.

OPTIONS/CLOCK Energy save

1. Press OPTIONS/CLOCK until “ENERGY SAVE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL to exit and display the time of day.

If Energy Save is ON, the range will go into Sleep mode after 5 minutes of inactivity.

Any keypad press will activate the display. If Energy Save is OFF, the display will be

ON at all times.

Sound Volume

Sets the volume of the tone to either high or low.

1. Press OPTIONS/CLOCK until “SOUND VOLUME” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL to exit and display the

time of day.

End-of-Cycle Tone

Activates or turns off the tones that sound at the end of a cycle.

1. Press OPTIONS/CLOCK until “END TONE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL to exit and display the

time of day.

Keypress Tones

Activates or turns off the tones when a keypad is pressed.

1. Press OPTIONS/CLOCK until “KEYPRESS TONE” is

displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL to exit and display the

time of day.

Reminder Tones Disable

Turns off the short repeating tone that sounds every 1 minute after

the end-of-cycle tones.

1. Press OPTIONS/CLOCK until “REMINDER TONE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL to exit and display the

time of day.

12/24 Hour Clock

1. Press OPTIONS/CLOCK until “12/24 HOUR” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL to exit and display the

time of day.

Demo Mode

IMPORTANT: This feature is intended for use on the sales ﬂoor

with 120 V power connection and permits the control features

to be demonstrated without the oven turning on. If this feature

is activated, the oven will not work.

1. Press OPTIONS/CLOCK until “DEMO MODE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL to exit and display the

time of day.

Sabbath Mode

The Sabbath mode sets the oven to remain ON in a bake setting

until turned off.

When the Sabbath mode is set, only the Bake cycle will operate.

All other cooking and cleaning cycles are disabled. No tones will

sound and the displays will not indicate temperature changes.

When the oven door is opened or closed, the oven light will not

turn on or off and the heating elements will not turn on or off

immediately.

To Enable Sabbath Mode Capability (One Time Only):

1. Press OPTIONS/CLOCK until “SABBATH” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL to exit and display the

time of day.

12-Hour Shutoff

The oven control is set to automatically shut off the oven 12 hours

after the oven initiates a cook or clean function. This will not

interfere with any timed or delay cook functions.

1. Press OPTIONS/CLOCK until “12Hr AUTO_OFF” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL to exit and display the

time of day.

Languages - Scrolling Display Text

Language options are English, Spanish, and French.

1. Press OPTIONS/CLOCK until “LANGUAGE” is displayed.

2. The current setting will be displayed.

3. Press the “1” or “2” keypad to select the desired language.

4. Press START or CANCEL to exit and display the

time of day.

Oven Temperature Offset Control

IMPORTANT: Do not use a thermometer to measure oven

temperature. Elements will cycle on and off as needed to provide

consistent temperature but may run slightly hot or cool at any

point in time due to this cycling. Most thermometers are slow

to react to temperature change and will not provide an accurate

reading due to this cycling.

The oven provides accurate temperatures; however, it may cook

faster or slower than your previous oven, so the temperature can

be adjusted to personalize it for your cooking needs. It can be

changed to Fahrenheit or Celsius.

To Adjust Oven Temperature:

1. Press OPTIONS/CLOCK until “TEMP CALIB” is displayed.

2. On some models, press “1” to adjust the drawer temperature

calibration. Press START, wait 10 seconds for the display to

change, and then continue with Step 3.

Press START to adjust the oven temperature calibration. Wait

10 seconds for the display to change, and then continue with

Step 3.

3. Press the “3” keypad to increase the temperature in 5°F

(3°C) increments or press the “6” keypad to decrease the

temperature in 5°F (3°C) increments. The offset range is

from -30°F to +30°F (-18°C to +18°C).

4. Press START or CANCEL to exit and display the

time of day.

Electric igniters automatically light the surface burners when

control knobs are turned to IGNITE.

Before setting a control knob, place ﬁlled cookware on the

grate. Do not operate a burner using empty cookware or without

cookware on the grate.

To Set:

1. Push in and turn knob counterclockwise to IGNITE.

All surface burners will click. Only the burner with the control

knob turned to IGNITE will produce a ﬂame.

2. Turn knob to anywhere between HIGH and LOW.

Power Failure

In case of prolonged power failure, the surface burners can be

lit manually. Hold a lit match near a burner, and then turn knob

counterclockwise to IGNITE. After burner lights, turn knob to

desired setting.

Surface Burners

IMPORTANT: Do not obstruct the ﬂow of combustion and

ventilation air around the burner grate edges.

Burner cap: Always keep the burner cap in place when using a

surface burner. A clean burner cap will help avoid poor ignition and

uneven ﬂames. Always clean the burner cap after a spillover, and

routinely remove and clean the caps according to the “General

Cleaning” section.

NOTE: Each round burner cap is marked with a letter indicating

the burner size.

Alignment: Be sure to align the gas tube opening in the burner

base with the oriﬁce holder on the cooktop and the igniter

electrode with the notch in the burner base.

NOTE: Each round burner base is marked with a letter indicating

the burner size.

Gas Tube Opening: Gas must ﬂow freely throughout the gas tube

opening for the burner to light properly. Keep this area free of soil,

and do not allow spills, food, cleaning agents or any other material

to enter the gas tube opening. Keep spillovers out of the gas tube

opening by always using a burner cap.

Burner Ports: Check burner ﬂames occasionally for proper size

and shape as shown in the previous illustration. A good ﬂame is

blue in color, not yellow. Keep this area free of soil, and do not

allow spills, food, cleaning agents or any other material to enter

the burner ports.

To Clean:

IMPORTANT: Before cleaning, make sure all controls are off and

the cooktop is cool. Do not use oven cleaners, bleach or rust

removers. Do not wash in the dishwasher.

1. Remove the burner cap and the burner base and clean

according to the “General Cleaning” section.

2. Clean the gas tube opening with a damp cloth.

3. Clean clogged burner ports with a straight pin as shown. Do

not enlarge or distort the port. Do not use a wooden toothpick.

If the burner needs to be adjusted, contact a trained repair

specialist.

WARNING

Fire Hazard

Do not let the burner flame extend beyond the edge of

the pan.

Turn off all controls when not cooking.

Failure to follow these instructions can result in death

or fire.

REMEMBER: When range is in use, the entire cooktop area

may become hot.

A. Burner cap

B. Gas tube opening

C. Burner base

D. Igniter electrode

E. Oriﬁce holder

A. 1 to 1

" (2.5 to 3.8 cm)

B. Burner ports

Cooktop

4. Replace the burner base. Each round burner base is marked

with a letter indicating the burner size. See the following

illustration for burner positions:

5. Replace the burner cap, making sure it is properly aligned with

the burner base. The burner cap should not rock or wobble

when properly aligned.

IMPORTANT: The bottom of the small and medium caps are

different. Do not put the wrong size burner cap on the burner

base.

NOTE: Each round burner cap is marked with a letter indicating

the burner size.

Small cap (S) Medium cap (M) Large cap (L)

6. Turn on the burner. If the burner does not light, check cap

alignment. If the burner still does not light, turn off the burner.

Do not service the burner yourself. Contact a trained repair

specialist.

Surface Grates

The grates must be properly positioned before cooking. In the

proper position, the grates should be ﬂush and level. Improper

installation of the grates may result in chipping or scratching of

the cooktop.

To ensure proper positioning, align bumpers on grate bottom with

the indentations in the cooktop.

A. Small (S)

B. Large (L)

C. Medium (M)

D. Large (L)

A. Incorrect

B. Correct

A. Bumpers

B. Alignment indentations

The surface grates interlock using the hooks on the middle grate

and the indents on the end grates. To remove the grates, remove

the end grates ﬁrst, and then remove the middle grate. To replace

the grates, replace the middle grate ﬁrst, and then place the end

grates on either side.

Although the burner grates are durable, they will gradually lose

their shine and/or discolor due to the high temperatures of the

gas ﬂame.

Burner Size

Select a burner that best ﬁts your cookware. See the following

illustration and chart.

Burner Size Recommended Use

Small

■ Low-heat cooking

■ Melting chocolate or butter

Medium

■ Multipurpose burner

Large

■ For large cookware

Large (most powerful)

■ For large cookware

■ Most powerful burner

A. Hook

B. Indent

Large

(most

powerful)

Griddle

To Use the Griddle:

1. Locate the griddle on the right side grate, as shown. The

locating feet on the bottom of the griddle will engage the grate

tines to keep the griddle from sliding.

2. Before each use, brush on a thin layer of cooking oil to keep

food from sticking. Cooking sprays may leave a sticky residue

on the griddle that is hard to remove.

3. Preheat the griddle for 5 minutes. Preheating the griddle slowly

will ensure even heat distribution and will avoid warping the

griddle.

4. For preheating and cooking, set the front burner to the lowest

heat setting and the rear burner to medium-high heat for best

performance.

NOTE: The griddle may also be used on the left side grate. For

best results, the rear burner setting should be set to Medium-

Low or Medium, and the front burner setting should be set to

Low.

To Clean the Griddle:

1. Let the griddle cool, and then empty the drip tray.

2. See the “General Cleaning” section for cleaning instructions.

3. Store griddle in a cool dry place.

Cookware

IMPORTANT: Do not leave empty cookware on a hot surface

cooking area, element or surface burner.

Ideal cookware should have a ﬂat bottom, straight sides and a

well-ﬁtting lid, and the material should be of medium-to-heavy

thickness.

Rough ﬁnishes may scratch the cooktop or coils. Aluminum and

copper may be used as a core or base in cookware. However,

when used as a base they can leave permanent marks on the

surfaces.

Cookware material is a factor in how quickly and evenly heat is

transferred, which affects cooking results. A nonstick ﬁnish has the

same characteristics as its base material. For example, aluminum

cookware with a nonstick ﬁnish will take on the properties of

aluminum.

Cookware with nonstick surfaces should not be used under the

broiler.

Check for ﬂatness by placing the straight edge of a ruler across

the bottom of the cookware. While you rotate the ruler, no space

or light should be visible between it and the cookware.

Griddle installed on right side of cooktop

Use the following chart as a guide for cookware material

characteristics.

Cookware Characteristics

Aluminum

■ Heats quickly and evenly.

■ Suitable for all types of cooking.

■ Medium or heavy thickness is best for most

cooking tasks.

■ May leave aluminum residues, which may

be diminished if cleaned immediately after

cooking.

Cast iron

■ Heats slowly and evenly.

■ Good for browning and frying.

■ Maintains heat for slow cooking.

■ Rough edges or burrs may scratch the

cooktop.

Ceramic

or Ceramic

glass

■ Follow manufacturer’s instructions.

■ Heats slowly, but unevenly.

■ Ideal results on low to medium heat

settings.

■ May scratch the cooktop.

Copper

■ Heats very quickly and evenly.

■ May leave copper residues, which may be

diminished if cleaned immediately after

cooking.

■ Can leave a permanent stain or bond to the

cooktop if overheated.

Earthenware

■ Follow manufacturer’s instructions.

■ Use on low heat settings.

■ May scratch the cooktop.

Porcelain

enamel-on-

steel or cast

iron

■ See stainless steel or cast iron.

■ Porcelain enamel bakeware without the

metal base may bond to the cooktop if

overheated.

Stainless

steel

■ Heats quickly, but unevenly.

■ A core or base of aluminum or copper on

stainless steel provides even heating.

1 0

1 1

1 2

1 3

1 4

1 5

1 6

1 7

1 8

1 9

2 0

Use ﬂat-bottomed cookware for best cooking results and energy

efﬁciency. The cookware should be about the same size as the

cooking area outlined on the cooktop. Cookware should not

extend more than

" (1.3 cm) outside the area.

Home Canning

When canning for long periods, alternate the use of surface

burners between batches. This allows time for the most recently

used areas to cool.

■ Center the canner on the grate above the burner.

■ Do not place canner on 2 surface burners at the same time.

■ For more information, contact your local agricultural extension

ofﬁce, or refer to published home canning guides. Companies

that manufacture home canning products can also offer

assistance.

Odors and smoke are normal when the oven is used the ﬁrst few

times or when it is heavily soiled.

IMPORTANT: The health of some birds is extremely sensitive to

the fumes given off by the oven. Exposure to the fumes may result

in death to certain birds. Always move birds to another closed and

well-ventilated room.

Aluminum Foil

IMPORTANT: To avoid permanent damage to the oven bottom

ﬁnish, do not line the oven bottom with any type of foil or liner.

For best cooking results, do not cover entire oven rack with foil

because air must be able to move freely.

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain

ﬁnish, do not place food or bakeware directly on the oven door

or bottom.

Bakeware

To cook food evenly, hot air must be able to circulate. Allow

2" (5 cm) of space around bakeware and oven walls. Make sure

that no bakeware piece is directly over another.

Racks

■ Position racks before turning on the oven.

■ Do not position racks with bakeware on them.

■ Make sure racks are level.

To position a rack, pull it out to the stop position, raise the front edge,

and then lift out. Use the following illustration and charts as guides.

The oven has 7 positions for a ﬂat rack, as shown in the previous

illustration and the following table.

Flat Rack Position* Type of Food

7 Broiling/searing meats, hamburgers,

steaks

6 Broiled meats, poultry, ﬁsh

3 or 4 Most baked goods, casseroles,

frozen foods

2 Roasted meats

1 Large roasts or poultry

For hamburger patties to have a well-seared exterior and a rare

interior, use a ﬂat rack in rack position 7. Side 1 should cook

for approximately 2

to 3

minutes. Side 2 should cook for

approximately 4 to 5 minutes. Expect a moderate degree of

smoke when broiling.

* If your model has a Max Capacity Oven Rack, the recessed

ends must be placed in the rack position above the desired

position of the food. See the following illustration.

IMPORTANT: These rack positions are for ﬂat racks. If a Max

Capacity Oven Rack is used, the rack position must be adjusted

as shown in the previous ﬁgure.

Multiple Rack Cooking

2-rack (non-convection): Use rack positions 2 and 5 or 3 and 6.

2-rack (convection): Use rack positions 2 and 5 or 3 and 6.

3-rack (convection): Use rack positions 2 and 7 and a Max

Capacity Oven Rack in rack position 5.

Baking Cookies and Layer Cakes on 2 Racks

Baking Layer Cakes

For best results when baking cakes on 2 racks, use the Bake

function, a ﬂat rack in rack position 3 and a roll-out rack in rack

position 5. Place the cakes on the racks as shown. Keep at least 3"

(7.6 cm) of space between the front of the racks and the front cakes.

Baking Cookies

For best results when baking cookies on 2 racks, use the Convection

Bake function, a ﬂat rack in rack position 3 and a roll-out rack in rack

position 4.

A. Ends of rack in position 3

B. Food in position 2

Oven

Roll-Out Rack

The roll-out rack allows easy access to position and remove food

in the oven. It is not recommended to use the roll-out rack in the

top rack, position 7, or the bottom rack, position 1.

Open Position

Closed and Engaged Position

To Insert Roll-Out Rack

1. Angle the front of the rack assembly up, and then insert

the rack frame into the “V” cutout in the rack guides of the

oven cavity.

2. Keep rack assembly lifted up at an angle, and then push

in to bypass the lower “V” cutout.

3. Lower the front of the rack assembly, and then gently slide

rack assembly into oven, bypassing the “V” cutouts. Push the

rack assembly into the oven until it stops at the ladder in the

back of the oven.

4. Reach through the rack to hold the sliding rack and the front

crossbar. Lift the front of the rack assembly, and then push the

rack assembly to the back of the oven. Lower the front of the

rack assembly so the ladder hook engages with the ladder on

both sides of the oven.

To Remove Roll-Out Rack

1. Push the sliding rack in completely so that it is in the closed

and engaged position.

2. Reach through the rack to hold the sliding rack and the front

crossbar. Lift the front of the rack assembly to disengage the

ladder hook from the ladders at the rear of the oven, and then

pull the rack assembly forward.

3. Using 2 hands, gently pull the sliding rack and the rack frame

at the same time to the “V” cutout. Angle the rack so that the

front is higher than the back, and then gently pull rack past

“V” cutout and then out of the oven.

To avoid damage to the sliding rack, do not place more than

25 lbs (11.4 kg) on the rack.

Do not clean the roll-out rack in a dishwasher. It may remove the

rack’s lubricant and affect its ability to slide.

See the “General Cleaning” section for more information.

A. Rack frame

B. Sliding rack

A. Rack frame

B. Sliding rack

A. “V” cutout

B. Rack guides

A. “V” cutout

B. Rack guides

C. Ladder hook

D. Ladder

A. Sliding rack

B. Front crossbar

Oven Vent

The oven vent releases hot air and moisture from the oven and

should not be blocked or covered. Blocking or covering the vent

will cause poor air circulation, affecting cooking and cleaning

results. Do not set plastics, paper, or other items that could melt

or burn near the oven vent.

Sabbath Mode

The Sabbath mode sets the oven to remain on in a bake setting

until turned off.

When the Sabbath mode is set, only the Bake cycle will operate.

All other cooking and cleaning cycles are disabled. No tones will

sound and the displays will not indicate temperature changes.

When the oven door is opened or closed, the oven light will not

turn on or off and the heating elements will not turn on or off

immediately.

To Enable Sabbath Mode Capability (One Time Only):

1. Press OPTIONS/CLOCK until “SABBATH” is displayed.

“OFF. Press (1) for On” will scroll in the display.

2. Press the “1” keypad. “ON. Press (1) for Off” will scroll in the

display. Sabbath mode can be activated for baking.

3. Press START or CANCEL to exit and display the time of day.

NOTE: To disable the Sabbath mode, repeat steps 1 through 3

to change the status from “SABBATH ON” to “SABBATH OFF.”

To Activate Sabbath Mode:

1. Press BAKE for the desired oven.

2. Press the number keypad to set a temperature other than

350°F (177°C).

3. Press START.

For timed cooking in Sabbath mode, press COOK TIME and

then the number keypads to set the desired cook time.

4. Press OPTIONS/CLOCK. Three tones will sound. Then press

“7.” “SAb” will appear in the display.

To Adjust Temperature (When Sabbath Mode Is Running):

1. Press the number keypad as instructed by the scrolling text

to select the new temperature.

NOTE: The temperature adjustment will not appear on the

display. The scrolling text will be shown on the display as it

was before the keypad was pressed.

2. Press START.

To Deactivate Sabbath Mode:

Press OPTIONS/CLOCK, and then press “7” to return to regular

baking, or press CANCEL for the desired oven to turn off

the range.

NOTE: No tones will sound while deactivating Sabbath mode.

A. Oven vent

Baking and Roasting