ADS Technologies USBAV-711-EF Le manuel du propriétaire

Hardware

+

Software

Manual

E

English

InstantDVD+MP3

G

German

F

French

1

st

Edition

Table of Contents

1

Quick Setup Steps

1

Ways to Capture and Edit Video

3

Installation Guide

4

Capture Wizard

11

German Manual

25

French Manual

49

Service & Warranty

Service & Warranty Service & Warranty

73

2

3

4

G

F

First Edition: November 2005

Microsoft, MS-DOS, Windows, Windows 95, Windows 98SE, Windows 2000, Windows ME and Windows XP are registered trademarks of Microsoft Corporation.

IBM is a registered trademark of the International Business Machines, Inc.

Adobe is a registered trademark of Adobe Inc.

ADS is a registered trademark of ADS Technologies Inc.

ADS Technologies (ADS) makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular

purpose. The information furnished within this written document is for information purposes only and is subject to change without notice. ADS Technologies assumes no responsibility

or liability for any errors or inaccuracies that may appear herein. ADS makes no commitment to update or to keep current information contained within this document. (rtt)

1

Quick Setup Steps

This is a One Page Quick Setup Guide to help you get up

and running fast

1

Connect the Audio/Video cables from your video source to Instant DVD+MP3 device.

2

Load the Instant DVD+MP3 CD.

3

Plug in the Power adapter and then connect Instant DVD+MP3 to your PC via the USB Port.

4

Drivers for WinXP and Win2000 are on the root of the CD. Drivers for Win98SE and

WinME are in the Win98SE&WinME folder on the CD. Direct Windows to the drivers and

they will install automatically.

5

Install CapWiz – CapWiz application must be installed as it installs the key elements for

Instant DVD+MP3 to function.

6

Install VideoStudio 9 SE DVD application.

7

Double Click the CapWiz icon on your Desktop.

8

Answer the questions on the

5

Wizard screens.

9

Press Play on your video source so you have video playing.

10

Click Preview on the CapWiz interface and video will appear.

11

Start capturing your video when ready.

Play with CapWiz for a while and then install the other valuable software we have included

with Instant DVD+MP3.

2

Instant DVD+MP3 Overview

A powerful tool for converting all your audio and video analog tape media into today’s

digital media formats. Capture and convert video from VHS tapes, camcorder and your DV

camcorder in to DVD’s in real time. Control the DV camcorder (Play, Stop, Rewind, Fast

Forward) from the easy to use Capture Wizard software. Instant DVD+MP3 has powerful

movie making capabilities including 16:9 aspect ratio and hardware encoded 2-channel

Dolby AC-3 audio to preserve your family memories in the best quality possible.

Instant DVD+MP3 even allows you to capture audio only which enables you to convert

your old cassette tapes or vinyl LP* into MP3 or WAV audio files. Recover your old music

memories and enjoy them in a new digital format.

Instant DVD+MP3 is the fastest and simplest way to get all your old tape media no matter

if it’s music or movies from tape to CD or DVD disc. One simple USB connection to your

PC and you are ready to archive all your content to optical disc.

* Audio Pre-Amplifier may be required for older turntable devices.

Powerful Software Bundle

We want to be sure you receive the greatest benefits from your Instant DVD+MP3

purchase so we have included software to meet your various project goals. Some times

you may just want to archive video to disk in the fastest way possible. Other times you

may want to get a bit creative, but you’ll save most of the video editing for a later time. And

for the big project you want to have a full featured video editor that gives you the freedom

to be creative. The good news is that Instant DVD+MP3 lets you do all that. We don’t just

give you one single way to use the product,

we provide many ways to get video in, out and

on to disc.

Instant DVD+MP3 includes several flexible and dynamic software tools for your video projects:

• Capture Wizard application

• Ulead VideoStudio 9 SE DVD

• Nero SoundTrax and Wave Editor (for Audio authoring only)

3

2

Ways to Capture and Edit Video

Capture Wizard (CapWiz): Easy Video Capture & Playback

This is the fastest and easiest way to capture MPEG-1 (VCD) or MPEG-2 (SVCD,

DVD) video on your PC. Use the Wizard screens to verify your video connections, video

compression format and where you want your video files stored on your computer

hard drive.

Use CapWiz to quickly capture video or send MPEG video back to a VCR for recording or a

TV for viewing. CapWiz also allows you to set up timed recordings and delayed recordings

and easily select video capture bit rates for Good, Better or Best DVD video quality. You can

even set custom settings for video resolution, video and audio bit rate, constant or variable

bit rates and set video pre-processing filters to help reduce noise in old VHS tapes.

You can also capture audio only into MP3 or WAV format. Convert your old tapes or LPs

into a digital audio format that will last forever. The audio capture function is available in the

Custom Settings of CapWiz application.

Note: When preparing to display captured video on a TV or recording to video tape, be

sure that you have connected audio video cables from the Instant DVD+MP3 to your TV’s

audio and video input and that you have selected the external video source on the TV. Only

MPEG-1 and MPEG-2 files can be exported out to TV, because Instant DVD+MP3 is an MPEG

decoder. If you have saved a movie to a streaming video format (.wmv) for example, this file

of type cannot be decoded for TV display.

Ulead VideoStudio 9 SE DVD: Full Video Capture & Editing

VideoStudio 9 takes you through the movie making process. Main steps are: CAPTURE,

EDIT, EFFECT, OVERLAY, TITLE, AUDIO and SHARE. Use VideoStudio 9 if you want to

edit video, add effects or video filters, titles, back ground music or voice overs to create a

unique video production. With VideoStudio 9 you can capture, edit and then export video to

TV or VCR or publish your movie to disc.

VideoStudio 9 includes a Movie Wizard that lets you easily author and burns your movie

to disc. You can export any single file to the Movie Wizard, or save your edited movies to

a VCD, SVCD or DVD movie and then export it to the Movie Wizard. Movie Wizard can

be selected when you double-click the VideoStudio icon in your Desktop. VCD and SVCD

movies can be burned on a CD-ROM disc. DVD movies can also be burned on a CD-ROM

disc, but you are limited to about 20 minutes of DVD quality video on a 700MB CD. If you

have a DVD recorder, you can get about 2 hours of DVD quality video on a 4.7 GB DVD

disc. VideoStudio 9 also supports publishing SVCD (MPEG-2 at 2.4 MB/sec.) to a CD-ROM.

SVCD is playable in many home DVD players. You can fit about 35-40 minutes of SVCD

content on a 700 MB CD disc.

Nero SoundTrax and Nero Wave Editor

Nero SoundTrax is a professional program for the production of audio CDs. Compile, mix or

edit your audio files. Transfer your records or tapes to your PC and then use SoundTrax to

create your Audio or MP3 CDs.

Nero Wave Editor is a compact application that lets you easily play back, create playlists and

burn your audio CD. Transform your computer into the ultimate recording studio.

4

3

Installation Guide

Minimum System Requirements

• Intel® Pentium® III 1GHz or higher or AMD Athlon/Duron CPU

• Microsoft ® Windows® 98SE, ME, 2000 or XP

• 256MB of RAM

• 1.2GB of available hard drive space for program installation

• 4 GB hard drive space for video capture and editing

• Windows® compatible display with at least 1024 x 768 resolution

• Windows® compatible mouse or pointing device

• Windows® compatible sound card

• Available USB 2.0 Port

• CD-Rom drive for software install

• CD-RW or DVD-Recordable drive required for saving movies onto CD or DVD

Recommended System Requirements

• Intel® Pentium® 4 1.5GHz CPU

• 512MB of RAM

• 20 GB free hard drive space

• 7200 rpm IDE Hard Drive

USB 2.0 and USB 1.1 Connections and Drivers

USB 2.0

We strongly recommend using

only

Windows XP or Windows 2000 with

Microsoft USB

2.0 drivers

for proper operation of your Instant DVD+MP3 at USB 2.0 connection speeds.

Microsoft Windows USB 2.0 drivers can be obtained from Microsoft directly:

• Windows XP – Included on your new PC, Windows Update, Download Windows XP

Service Pack 1

• Windows 2000 – Download Windows 2000 Service Pack 3

Many USB 2.0 upgrade cards ship with non-Microsoft, third party drivers. These drivers

have many revisions and may have compatibility issues with some USB 2.0 devices. In

many cases the USB 2.0 driver you have may work fine, but we cannot guarantee proper

operation with third party USB 2.0 drivers. Contact your USB 2.0 add-in card supplier for

the latest versions of USB 2.0 drivers for Win98SE and WinME.

5

USB 1.1

We recommend using the USB 1.1 port on your motherboard or from a USB 1.1 add-

in card. All USB 1.1 cards use the Microsoft USB drivers. If you are using Win98SE or

ME we recommend using the USB 1.1 port on your PC for proper operation of Instant

DVD+MP3. Do not use a USB Hub to connect the Instant DVD+MP3 to your PC.

Getting Started

Check Instant DVD+MP3 Contents

Hardware:

• Instant DVD+MP3 device

• 5 VDC Power supply

• 6 ft. USB Cable

• 6 ft. A/V Out cable (RCA video and (L+ R) Audio to RCA video and 3.5 mm stereo)

• Two (2) Installation CD’s

• User’s Manual

CD 1 Contains:

• Capture Wizard Application

• USB Instant DVD+MP3 device drivers

• Nero SoundTrax and Nero Wave Editor Application

• User’s Manual in PDF format

CD 2 Contains:

• Ulead VideoStudio 9 SE DVD customized for Instant DVD+MP3

1

Front

Back

6

Wire It Up

In this section you will connect audio and video cables to capture audio and video and

then send audio and video back to a TV or VCR for viewing or recording.

2

1

Connect your video source (VHS, DVD, Laser Disc Player, TV. etc.) to your USB Instant

DVD+MP3. Connect the 6 ft. A/V In cable to the 3 RCA jacks to your analog audio/video

source RCA Line Out.

2

The other end connects to the “RCA Video In” jack and “3.5 mm Audio In” jacks on the

rear of your Instant DVD+MP3.

Plug It In

In this section you will Connect USB Instant DVD+MP3 to your PC and Install Software

Drivers. Please read through this section first, then go back and follow these step by step

instructions to connect your USB Instant DVD+MP3 and install device drivers and software

applications:

1

Insert USB Instant DVD+MP3 CD

.

3

2

Once you see the Instant DVD+MP3 installation screen, plug the power cable into your

USB Instant DVD+MP3, then plug it into a power source.

7

Install Device Drivers and Software

Now, plug your USB cable into Instant DVD+MP3 and your PC. Windows will recognize

the device and ask you for the device drivers.

Windows XP or Windows 2000

Let Windows conduct an automatic search for the drivers.

The drivers are located in the root directory of your USB Instant DVD+MP3 CD, usually

your “D” drive. Windows will install the drivers.

Windows 98SE or Windows ME

The Win98SE/ME drivers are located on the Instant

DVD+MP3 CD in the Win98 folder. When Windows looks for the driver you will want to

direct it the drive your CD is located (usually “D:\” drive) and double-click on the Win98

folder. Windows will then automatically install the drivers.

4

Install Software Applications

1

Now that you have installed the device, click the

Capture Wizard

button

to install the

key software components that make Instant DVD+MP3 work and install the Capture

Wizard capture and playback application.

• If you do not have Microsoft’s DirectX 9.0c installed, it will install automatically. DirectX

9.0c is required for proper operation of your Instant DVD+MP3. Installation of DirectX

9.0c may require a re-start of your computer.

• If your computer restarted, click “My Computer” on your desktop. Double click the CD

Drive icon to bring back the Instant DVD+MP3 Installation screen.

• Continue installing the key bundled software on to your system: Nero Audio Suite and

VideoStudio 9 SE DVD.

2

Install VideoStudio 9 SE DVD from Disc 2.

5

Verify Hardware Installation

Check Device Manager to verify that the Instant

DVD+MP3 hardware is recognized by Windows

and is properly installed.

6

8

Windows 98SE or Windows ME:

1

Click Start, Settings, Control Panel.

2

In Control Panel, click System.

3

Click Device Manager tab.

4

Double click the Sound, Video and Game Controllers.

5

ADS Instant DVD+MP3 should be listed.

Windows XP or Windows 2000:

1

Click Start, Settings, Control Panel.

2

In Control Panel, click System.

3

Click on the Hardware Tab.

4

Click Device Manager Button.

5

Double click the Sound, Video and Game Controllers Device.

6

ADS Instant DVD+MP3 should be listed.

If ADS Instant DVD+MP3 is listed under the Sound, Video and Game Control lers

heading, then the device was properly installed.

Optimize your System for Best Performance

7

Set your VGA Resolution

1024 X 768 is the optimal resolution for viewing video at full resolution. DVD video is

captured at 720 x 480 (720 x 576) PAL. If your resolution is not high enough you will not

be able to view the video at full resolution.

1

Right click on your desktop

2

Click Properties

3

Click on Settings Tab

4

Adjust screen area to 1024 X 768 & 16 Bit Color (or higher if your VGA card and monitor

support higher resolutions and color depth).

9

Defragment your Hard Drive for best performance

Disk Defragmentation consolidates files and folders on your Hard Disk and allows for

better system access of files and folders. It will also help when you are capturing and

writing new files into your Hard Disk. Please keep in mind that this process requires some

amount of time which depends on several factors, including the size of the Hard Disk,

number and size of files and how fragmented your local disk is. Before you Defragment

your Hard Disk, you can Analyze a volume to see if this step is required.

1

Double-click My Computer

2

Right Click and Select Properties on the Hard Disk you want to Save your captured Videos

3

Click on Tools tab

4

Click Defragment Now button

5

Click Analyze button to see if you need to Defragment the Hard Disk

Enable DMA to optimize video capture (for Win98SE or ME only):

Enabling DMA will significantly improve the video capture capabilities of your system. If

DMA is not enabled you will very likely suffer from dropped video frames.

For Windows 98SE and ME (not required for Windows XP users): Enable DMA on your

IDE hard drive for optimal video capture.

1

Right click on My Computer

2

Click Properties

3

Click on Device Manager

4

Double click Disk Drives

5

Double click Hard Disk (labeled Generic IDE type XXX)

6

Click the settings tab

7

Enable DMA by checking the DMA box

8

Click OK

9

Click OK

Your computer will need to reboot after DMA is enabled.

Installation Summary

By now you should have completed the following:

1

Made all of the Audio and Video connections between Instant DVD+MP3 and your

Audio/Video source.

2

Connected Instant DVD+MP3 to the Power Supply and USB Port on your PC.

3

Installed the drivers and verified that the device is properly installed

4

Installed all necessary software applications required for proper operation.

5

Optimized your System for best performance.

6

Now you are ready to Start Making DVD Movies.

8

Note: Not all hardware supports DMA access.

10

Start Making DVD Movies

Now you are ready to start capturing video. We have created the Capture Wizard

(CapWiz) application to allow you to quickly capture and export video on your PC without

learning how to edit video or author a DVD. Use the Capture Wizard application to test

video capture and playback of video before moving on to VideoStudio 9 SE DVD.

We have created a simple getting started Wizard that allows you to verify your connections

and make the proper setup choices before capturing video.

9

11

4

Capture Wizard

Instant DVD+MP3 Capture Wizard

Click “Next” to advance to the next step.

1

Open CapWiz

Click the CapWiz icon on your Desktop or Click “Start” > “All Programs” > “ADSTech

Instant DVD+MP3” and click on “Capwiz”.

Choose worldwide video standard based on country – For Users in North America, you

will select NTSC. For Users in Europe and many other countries you will select PAL.

For more information on these standards, click on “Learn More about Worldwide Video

Standards…”

2

Select Video Inputs & Outputs

Choose RCA, S-Video or DV based on your video source.

12

3

Create file name and select file location

We will automatically select ‘My Documents\My Videos” as the location to store your

video files. You can select a different location if you desire.

4

Choose video format

In this step you will select between MPEG-1 and MPEG-2 video compression formats.

Select MPEG-2 if you wish to capture video in the highest quality DVD format. Select

MPEG-1 if you want to capture video in the VCD format.

The Disk Space indicator shows the amount of disk space you have available and an

example of how much video you can capture if you selected MPEG-2 at 3 Mb/sec.

For more information on these MPEG, click on “Learn More about Video Formats…”

13

5

Ready

Now you are ready to start viewing and capturing video. You will need to start your

camcorder or VCR playing. Press Play on your video source (VCR, DVD player, etc.).

Click Finish and the Wizard screen will disappear and you will see the full Capture

Wizard interface.

Using Capture Wizard Video Capture/Playback tool for the

first time

You have just completed the Wizard screens to ensure that you have connected your

video cables, selected your video format and now you are ready to capture video.

The Capture Wizard Interface

14

Preview and Record Video

1

Be sure your video device is playing a video

2

Click “Preview” and you will see video playing in the preview window. You will notice the

status indicator displaying “Preview”.

3

Click the “Stop” ( ■ ) button or press the “Esc” key on your keyboard to stop video preview.

4

If you Click the Red “Record” (

●

) button while previewing video, the video will stop

momentarily, then start again. When the video preview starts again, you are recording.

You will notice the status indicator displaying “Recording” and the Time count start.

5

To Stop recording, press the “Stop” ( ■ ) button or press the “Esc” key on your keyboard.

6

You will notice that the file name has been added to the playback list box.

Pause Recording

1

While recording video from a source, you can Pause the recording and continue the

recording in a different portion. This is useful if you plan to change tapes and mix

video contents.

2

While Recording, press the “Pause” (

||

) button, your Recording will stop while the

source video still plays. You can resume recording when you press “Record” (

●

) button

or the “Pause” (

||

) button.

3

This makes it possible to capture different video sources into a single file instead of

multiple files.

Ways to Begin Recording

1

You can start recording from the Stop or idle status in CapWiz or while you are

previewing video.

2

Click the red Record (

●

) button to begin recording at any time.

3

To Stop recording, Click the “Stop” ( ■ ) button or the “Esc” key on your keyboard.

4

The video will be displayed in the resolution you selected for the video capture:

• VCD 352 x 240 NTSC / 352 x 288 PAL

• SVCD 480 x 480 NTSC / 480 x 576 PAL

• DVD 720 x 480 NTSC /720 x 576 PAL

Playback Captured Video

Captured video files can be displayed on your computer monitor or be decoded through

Instant DVD+MP3 for display on a TV or recorded to video tape. Use the “Playback On”

selection to determine where video will be displayed.

Playback on the Computer Screen

This is the default setting. Video will be played back at the resolution it was captured in.

1

Click on the file name in the Playback List Box, then click on the “Play” ( ► ) button. You

may also double click on the file name for Instant Playback. You will notice that the

status indicator turns Green and the display changes to Play.

2

To Stop Playback, Click the Stop ( ■ ) button or press the “Esc” key on your keyboard.

15

Seek through the video

If you have recorded a long video, you may want to jump ahead to a specific point in the

video file and continue playback from that point.

1

Double-click on the file you want to Playback in your computer.

2

As the video is playing in the screen, use your mouse to drag the playback position

slider to the point you desire.

3

Once you release the mouse, the file will resume playback.

Volume

Instant DVD+MP3 lets you control the recording volume and also the playback volume.

Use the sliding control to increase or decrease the volume during playback or record. You

want to do a short video capture to see if you need to adjust the volume control up or

down for the best results.

Keyboard Short Cuts:

Preview = Enter key

Record = “R” key

Instant Playback = double click file name

Play/Pause = space bar

Stop Record = Esc key

Stop Preview = Esc key

Advance 1 second (in Pause mode) = right arrow key

Rewind 1 second (in Pause mode) = left arrow key

Export Configuration – Sending Video to TV or VCR

You can use CapWiz to export MPEG video files you have captured with Instant

DVD+MP3 to display on TV or record back to video tape. Use the cables included to

connect to the Video Out and Audio Out jacks, and then connect the Yellow, Red and

White RCA jacks to your TV or VCR.

Playback to TV or VCR

If you wish to send the video you have captured back to a TV for viewing or record to a VCR

1

Select TV/VCR in the Playback Video on box.

2

Select the file you would like to play from the list.

3

Click the PLAY ( ► ) button to begin playback or double click the file name for

Instant playback.

4

To Stop Playback, Click the Stop ( ■ ) button

16

Capture Wizard Features and Functions

Recording File Name

Before Recording check the Recording Filename box in the upper left hand corner of the

application. The file name you selected in the Wizard Screen is listed here.

1

Keep this file name if you wish or run the Wizard to use a new file name.

2

Check the “Auto Naming” box and CapWiz will automatically name each captured file in

sequential order; i.e. if your video file is “My Video”, the first file captured will be named

“Movie-0000”, the second “Movie-0001” and so on.

3

Every time you stop a capture, the new file name will be displayed in Playback List box.

4

You can also uncheck “auto-naming” and click the “Unique” button and CapWiz will use

the file name you enter in the filename box. You need to provide a new file name for

each video clip captured. If you do multiple captures without changing the unique file

name, the file will be written over each time you capture.

Playback List Box

The Playback list box shows the file names of your video captures. This list will match the

directory location you selected in the Capture Wizard screens. If you are unsure of the

location you selected, run the Wizard again.

Browse

The Browse button will allow you to browse to other file directories or hard drives. If you

select another directory, any MPEG video files located there will appear in the Playback

list box.

Details

The Details button will allow you examine the details of the files in the Playback List box.

Click on the Details Button and a dialog box will open showing detailed information about

each file such as: Date, File Size, File Name and location on your system.

Click on any file in this dialog box and then click Details again and you will see more

details about this individual files such as:

1

Video bit rate

2

Audio sampling rate

3

Audio bit rate

4

Frame rate

Deleting a File

From the detailed information box you can delete a file by clicking the “Remove” button.

CapWiz will ask you if you are sure, click OK and the file is deleted from your system.

17

Application Links

The icons at the side of the CapWiz screen allow you to easily jump from CapWiz to the

bundled applications that came with your Instant DVD+MP3. You can quickly jump to

VideoStudio, Nero Audio Suite. When you click on an application icon, that application will

start and CapWiz will automatically close.

CapWiz also allows you to capture MPEG1 or MPEG2 video straight to Disc, just click the

Direct to Disc button to start the application, you will need to have the correct media disc

for the type of project you want in your DVD burner.

Menu Options

This section will describe all settings and choices for all of the menu options along the top

of the CapWiz Interface.

Inputs/Outputs

This dialog box allows you to quickly change your video input and output choices. Here

you can choose between RCA, S-Video or DV Inputs and RCA or S-Video Outputs. These

settings can also be changed by running the Capture Wizard Screens.

Audio/Video Format

Country Setting

The Audio/Video Format dialog screen allows you to select your video

standard based on your location. Based on the country select, the system will set to NTSC

of PAL video format. If you are not sure of the correct selection, run the Capture Wizard

and read the document called “Learn More about Worldwide Video Standards”.

Capture Type

Video and Audio

For capture from a video source, audio is set to Mpeg 1 Layer-2 format.

Audio Only

For capture from an audio source. You can select the following options:

• Mpeg1 Layer-2 audio format

• WAV (LPCM) audio format

• MP3 audio format

Video Quality

The Audio/Video format box also allows you to set your video resolution and quality

setting. You can choose:

• DVD at Good, Better or Best Quality

• Super Video CD (SVCD)

• Video CD (VCD)

• DivX (MPEG-4)

18

There are no quality settings for SVCD or VCD as these formats have standard video and

audio bit rates.

CapWiz will display the following standard video capture settings based upon your

USB Connection:

VCD

SVCD

DVD

USB 2.0

MPEG-1 video at 1.15 MB/s

MPEG-2 video at 2.4 MB/s

MPEG-2 video at 4, 6 or 9 MB/s

USB 1.1

MPEG-1 video at 1.15 MB/s

MPEG-2 video at 2.4 MB/s

MPEG-2 video at 2.5, 3 or 4 MB/s*

The Video format and bit rate (4, 6 or 9 Mb/sec) for DVD video will be displayed in the

Status Indicator area of the CapWiz interface so you will always know what video format

and bit rate you are recording.

* If connected at USB 1.1 Full Speed the maximum video bit rate is 4 Mb/sec.

Custom User Defined Video Settings

CapWiz lets you set custom capture settings. The custom settings give you lots of

flexibility in creating capture settings to meet your individual needs. To access the Custom

Settings dialog box, click on the “Custom Settings…” button.

Regional Settings

Select the country you are located to set the proper Video Standard.

Video Encoding Format

• MPEG-1 (VCD only)

• MPEG-2

• DivX (MPEG-4)

• None (Audio Only) – select this to capture audio only in WAV or MP3 audio format

Note: DivX (MPEG-4) is not a supported format on most DVD players. For more information

about it, please visit the following website: www.divx.com.

Audio Encoding Format

Instant DVD+MP3 is the first video capture device that also encodes audio in Dolby AC-3

(2 channels) for the best possible quality among other supported standards.

• MPEG1 Layer-2

• WAV (LPCM) available when Audio Only is selected

• MPEG1 Layer-3 (MP3) available when Audio Only is select

• AC-3

La page charge ...

ADS Technologies USBAV-711-EF Le manuel du propriétaire

Ce manuel convient également à

ADS Technologies USBAV-711-EF Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents