Motorola FINITI Guide de démarrage rapide

Catégorie
Casques mobiles
Taper
Guide de démarrage rapide
Quick Start Guide
MOTOROLA FINITI™
Congratulations 1
Congratulations
Your MOTOROLA FINITI headset delivers
the best sound in any condition and without
raising your voice. CrystalTalk™ dual
microphones are used for everyday noise
cancellation, and the stealth mode for windy or
extreme conditions.
Some other cool features:
Hear and reply to phone text messages with
MotoSpeak™.
Hear the callers name and use your voice to
answer or ignore calls.
Stream Bluetooth® music from your phone.
Voice prompts to guide you on connections,
battery level, and other functions.
Simultaneous connect with two phones.
Weve crammed all of the main features of
your headset into this handy guide, and in a
Congratulations2
matter of minutes we’ll show you just how
easy your headset is to use.
So go on, check it out.
more information
on the Web: www.motorola.com/support
Caution: Before using your headset for the
first time, please read the important Safety,
Regulatory & Legal information at the back
of this guide (page 25).
Your headset 3
Yo u r h e a d s e t
the important parts
Warning: Do not apply pressure or squeeze
the stealth mode sensor (small rubber balloon),
as it can damage the parts inside and will void
the warranty.
Earhook
Ear
Loop
MicroUSB
Charging
Connector
Volume
Buttons
Call
Button
Status
Light
the
Stealth
Mode
Button
Earpiece with
the Stealth
Mode Sensor
Power
Switch
side view
Charge it4
Charge it
let’s get you up and running
While your headset is charging, you wont be
able to use it.
Note: Your battery is designed to last the life of
your product. It should only be removed by a
recycling facility. Any attempt to remove or
replace your battery will damage your headset.
Status Light
Red/Yellow - charging
Green - fully charged
Basics 5
Basics
a few essentials to get you started
Change ear fitting
Your headset comes with multiple ear fittings.
Choose your ear fitting (loop or spring) so your
headset is comfortable.
1 Lift the current ear fitting
up and slide it off the
headset in an upward
direction.
Left
Ear
Spring
Right
Ear
Spring
Medium
Ear
Loop
Small
Ear
Loop
Large
Ear
Loop
Basics6
2 Slide the new ear loop
or spring downward
onto the earpiece,
then align and push
the bottom onto the
groove.
Wear it
1 Bend the ear
loop or spring
and insert the
earpiece into
your ear.
Make sure
the stealth
mode sensor
is in contact with your ear canal.
Groove
Ear canal
the Stealth mode
sensor
7
2 Place the ear loop or spring in the bend of
your ear.
3 Flex the earhook and loop it over your ear,
and point the headset microphone towards
your mouth.
Basics8
Turn it on & off
Listen to music
Note: This feature is phone dependent.
Your headset allows you to stream Bluetooth
music from your phone. Music playback is
started and controlled from your phone.
While a call is active, music pauses. When the
call ends, music resumes playing.
Power
Switch
Off
On
Basics 9
Enhanced call features
Tell headset to answer or ignore calls
Use your voice to answer or ignore an
incoming call:
say “answer” to answer the call
say “ignore to ignore the call
Note: This feature does not work for second
incoming calls.
Hear callers name
If your phone knows your callers name, then
you hear “call from <name> on an incoming
call.
Clean your headset
Keep your headset clean and dry. High
humidity or perspiration can make the ear
fitting feel slippery. Remove the ear fitting and
Basics10
wipe it with a soft cloth to remove dirt and
moisture.
Note: Be very careful when wiping near the
stealth mode sensor.
Also check for any debris that may be blocking
the small speaker port on the ear fitting.
Pair & connect 11
Pair & connect
connect and go
Pair & connect with your phone
1 Turn off any Bluetooth® devices previously
paired with your headset.
2 Turn on the Bluetooth feature on your
phone.
3 Put the headset on your ear (see “Wear it
on page 6).
4 Turn on your headset (see “Turn it on & off
on page 8).
The status light becomes steadily lit in blue
and you hear “ready to pair.
5 Follow the voice prompts to connect your
phone to your headset.
Note: When prompted for the passkey,
enter 0000.
Pair & connect12
When your headset successfully pairs with
your phone, you hear “pairing complete.
For daily use, make sure your headset is turned
on, and your phones Bluetooth feature is on.
Your headset and phone connect automatically.
Pair & connect a second phone
1 Turn off first phone and any other Bluetooth
devices previously paired with your headset.
2 Turn your headset off.
3 Turn on the Bluetooth feature on your
phone.
4 Put the headset on your ear.
5 Turn on your headset.
The status light becomes steadily lit in blue
and you hear “ready to pair”.
Pair & connect 13
6 Follow the voice prompts to connect your
phone to your headset.
Note: When prompted for the passkey,
enter 0000.
When your headset successfully pairs with
your phone, you hear “pairing complete.
To connect to both phones, turn on the first
phone while the second phone is connected.
When you hear “<phone 1 name>
connected, your headset is connected to both
phones.
Test your call connection
1 Place the headset on your ear.
2 On your phone, dial a phone number and
press the Call/Send key.
If your phone and headset are successfully
connected, you hear ringing on the headset.
Be clear14
Be clear
your voice, not all the noise
Always be heard during calls with the
CrystalTalk dual microphones and the stealth
mode sensor:
CrystalTalk is always on to cancel out
everyday background noise.
The stealth mode can be turned on when
noise and wind get really bad to shut out all
background noise.
Turn on the stealth mode
Press the Stealth
Mode button and
listen for the
“stealth mode on
or “stealth mode
off prompt.
the Stealth
Mode Button
Be clear 15
Note: Make sure the stealth mode sensor is
placed correctly and is in contact with the ear
canal (see page 6). It is normal for the sound of
your voice to be less “natural” in the stealth
mode.
Calls16
Calls
it’s good to talk
Note: Some features are phone/network
dependent.
To...
answer call Say “answer” or press the
Call button.
reject call Say “ignore or press and
hold a Volume button until
you hear a tone.
make a
voice dial
call
Press the Call button and you
hear a tone.
redial last
call
Press and hold the Call
button until you hear a tone.
mute or
unmute a
call
Press both Volume buttons.
Calls 17
Tip: When connected to two phones, follow
the voice prompts to perform functions such
as voice dial, redial, and end call on the desired
phone.
end a call Press the Call button.
answer
second
incoming
call
Press the Call button.
reject
second
incoming
call
Press and hold a Volume
button until you hear a tone.
turn on/off
stealth
mode
Press the stealth mode
button.
To...
Talk time18
Talk t im e
check your chat time
Press both Volume buttons while not on a call.
To save battery power, turn off the headset
when not using it.
if light
shows...
and/or you
hear...
your remaining
talk time is...
red battery level
is low”
less than
1.5 hours
yellow battery level
is medium
between 1.5 to
3.5 hours
green battery level
is high
more than
3.5 hours
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157

Motorola FINITI Guide de démarrage rapide

Catégorie
Casques mobiles
Taper
Guide de démarrage rapide