Wacker Neuson GV5600 Manuel utilisateur

5200003459 01 1011

Operator’s Manual

Portable Generator

GV 5600A

Notice d’Emploi

Générateur

5200003459

Copyright

notice

All rights, including copying and distribution rights, are reserved.

This publication may be photocopied by the original purchaser of the machine. Any

other type of reproduction is prohibited without express written permission from

Wacker Neuson Production Americas LLC.

Any type of reproduction or distribution not authorized by Wacker Neuson Production

Americas LLC represents an infringement of valid copyrights. Violators will be

prosecuted.

Trademarks

All trademarks referenced in this manual are the property of their respective owners.

Manufacturer

Wacker Neuson Production Americas LLC

N92W15000 Anthony Avenue

Menomonee Falls, WI 53051 U.S.A.

Tel: (262) 255-0500 · Fax: (262) 255-0550 · Tel: (800) 770-0957

www.wackerneuson.com

Original

instructions

This Operator’s Manual presents the original instructions. The original language of this

Operator’s Manual is American English.

5200003455 01 1011

Foreword

wc_tx001852gb.fm 3

Foreword

SAVE THESE INSTRUCTIONS—This manual contains important instructions for

the machine models listed below. These instructions must be followed during

installation and maintenance of the generator (and battery, if equipped).

Machines

covered in

this manual

Machine

documentation

 From this point forward in this documentation, Wacker Neuson Production

Americas LLC will be referred to as Wacker Neuson.

 Keep a copy of the Operator’s Manual with the machine at all times.

 Use the separate Parts Book supplied with the machine to order replacement

parts.

 Refer to the separate Repair Manual for detailed instructions on servicing and

repairing the machine.

 If you are missing any of these documents, please contact Wacker Neuson to

order a replacement or visit www.wackerneuson.com.

 When ordering parts or requesting service information, be prepared to provide

the machine model number, item number, revision number, and serial number.

Expectations

for

information in

this manual

 This manual provides information and procedures to safely operate and

maintain the above Wacker Neuson model(s). For your own safety and to

reduce the risk of injury, carefully read, understand, and observe all instructions

described in this manual.

 Wacker Neuson expressly reserves the right to make technical modifications,

even without notice, which improve the performance or safety standards of its

machines.

 The information contained in this manual is based on machines manufactured

up until the time of publication. Wacker Neuson reserves the right to change

any portion of this information without notice.

CALIFORNIA

Proposition

65 Warning

Engine exhaust, some of its constituents, and certain vehicle components, contain

or emit chemicals known to the State of California to cause cancer and birth

defects or other reproductive harm.

Laws

pertaining to

spark

arresters

NOTICE: State Health Safety Codes and Public Resources Codes specify that in

certain locations spark arresters be used on internal combustion engines that use

hydrocarbon fuels. A spark arrester is a device designed to prevent accidental dis-

charge of sparks or flames from the engine exhaust. Spark arresters are qualified

and rated by the United States Forest Service for this purpose. In order to comply

with local laws regarding spark arresters, consult the engine distributor or the local

Health and Safety Administrator.

Machine Item Number

GV 5600A 0620995

Foreword

4 wc_tx001852gb.fm

Manufacturer’s

approval

This manual contains references to approved parts, attachments, and modifica-

tions. The following definitions apply:

 Approved parts or attachments are those either manufactured or provided by

Wacker Neuson.

 Approved modifications are those performed by an authorized Wacker

Neuson service center according to written instructions published by Wacker

Neuson.

 Unapproved parts, attachments, and modifications are those that do not

meet the approved criteria.

Unapproved parts, attachments, or modifications may have the following conse-

quences:

 Serious injury hazards to the operator and persons in the work area

 Permanent damage to the machine which will not be covered under warranty

Contact your Wacker Neuson dealer immediately if you have questions about

approved or unapproved parts, attachments, or modifications.

wc_bo5200003455_01TOC.fm 5

Table of ContentsGV 5600A

Foreword 3

1 Safety Information 7

1.1 Signal Words Used in this Manual ....................................................... 7

1.2 Machine Description and Intended Use ............................................... 8

1.3 Operating Safety ................................................................................ 10

1.4 Operator Safety while Using Internal Combustion Engines ............... 13

1.5 Service Safety .................................................................................... 14

2 Labels 17

2.1 Label Locations .................................................................................. 17

2.2 Label Meanings .................................................................................. 17

3 Lifting and Transporting 21

4 Operation 22

4.1 Recommended Fuel ........................................................................... 23

4.2 Refueling the Machine ........................................................................ 24

4.3 Determining Power Requirements ..................................................... 25

4.4 Installation .......................................................................................... 26

4.5 Installing the Spark Arrester ............................................................... 26

4.6 Generator Derating ............................................................................. 27

4.7 Grounding the Generator ................................................................... 28

4.8 Operating Heavy Loads ...................................................................... 28

4.9 Use of Extension Cords ...................................................................... 29

4.10 Control Panel ...................................................................................... 30

4.11 Testing the Ground-Fault Interrupt (GFI) ............................................ 31

4.12 Main Circuit Breaker ........................................................................... 31

4.13 Voltage Selector Switch ..................................................................... 32

4.14 Auto Idle Switch .................................................................................. 32

4.15 Before Starting ................................................................................... 33

4.16 Starting ............................................................................................... 34

4.17 Stopping ............................................................................................. 35

4.18 Emergency Shutdown Procedure ....................................................... 35

6 wc_bo5200003455_01TOC.fm

Table of Contents GV 5600A

5 Maintenance 36

5.1 Maintaining the Emission Control System .......................................... 36

5.2 Periodic Maintenance Schedule ......................................................... 36

5.3 Engine Oil ........................................................................................... 37

5.4 Servicing the Air Cleaner .................................................................... 38

5.5 Spark Plug .......................................................................................... 39

5.6 Cleaning the Sediment Cup ................................................................ 40

5.7 Storage ............................................................................................... 41

6 Troubleshooting 42

7 Technical Data 43

7.1 Generator ........................................................................................... 43

7.2 Engine ................................................................................................. 44

8 Emission Control Systems Information and Warranty 45

8.1 Emission Control System Background Information ............................ 45

8.2 Limited Defect Warranty for Exhaust Emission Control System ......... 46

8.3 Limited Defect Warranty for Wacker Neuson Evaporative

Emission Control Systems .................................................................. 46

8.4 California Evaporative Emission Control Warranty Statement ........... 49

8.5 Limited Defect Warranty for Exhaust Emission Control System ......... 50

9 Schematics 52

9.1 Electrical Schematic ........................................................................... 52

9.2 Components ....................................................................................... 53

wc_si000625gb.fm

7

GV 5600A Safety Information

1 Safety Information

1.1 Signal Words Used in this Manual

This manual contains DANGER, WARNING, CAUTION, NOTICE, and NOTE

signal words which must be followed to reduce the possibility of personal injury,

damage to the equipment, or improper service.

NOTICE: Used without the safety alert symbol, NOTICE indicates a situation

which, if not avoided, could result in property damage.

Note: A Note contains additional information important to a procedure.

This is the safety alert symbol. It is used to alert you to potential personal hazards.

f Obey all safety messages that follow this symbol.

DANGER

DANGER indicates a hazardous situation which, if not avoided, will result in death

or serious injury.

f To avoid death or serious injury from this type of hazard, obey all safety

messages that follow this signal word.

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result in

death or serious injury.

f To avoid possible death or serious injury from this type of hazard, obey all safety

messages that follow this signal word.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, could result in

minor or moderate injury.

f To avoid possible minor or moderate injury from this type of hazard, obey all

safety messages that follow this signal word.

wc_si000625gb.fm

8

Safety Information GV 5600A

1.2 Machine Description and Intended Use

This machine is a portable electric power source. The Wacker Neuson Portable

Generator consists of a tubular steel frame surrounding a fuel tank, a gasoline

engine, a control panel, and an electric alternator. The control panel includes

controls and receptacles. As the engine runs, the generator converts mechanical

energy into electric power. The operator connects loads to the electric power

receptacles.

This machine is intended for the purpose of supplying electrical power to

connected loads. Refer to the product specifications for the output voltage and

frequency of this generator, and the maximum output power limit of this generator.

This machine has been designed and built strictly for the intended use described

above. Using the machine for any other purpose could permanently damage the

machine or seriously injure the operator or other persons in the area. Machine

damage caused by misuse is not covered under warranty.

The following are some examples of misuse:

 Connecting a load that has voltage and frequency requirements that are

incompatible with the generator output

 Overloading the generator with a load that draws excessive power during either

continuous running or start-up

 Operating the generator in a manner that is inconsistent with all federal, state

and local codes and regulations

 Using the machine as a ladder, support, or work surface

 Using the machine to carry or transport passengers or equipment

 Operating the machine outside of factory specifications

 Operating the machine in a manner inconsistent with all warnings found on the

machine and in the Operator’s Manual.

This machine has been designed and built in accordance with the latest global

safety standards. It has been carefully engineered to eliminate hazards as far as

practicable and to increase operator safety through protective guards and labeling.

However, some risks may remain even after protective measures have been taken.

They are called residual risks. On this machine, they may include exposure to:

 Heat, noise, exhaust, and carbon monoxide from the engine

 Fire hazards from improper refueling techniques

 Fuel and its fumes

 Electric shock and arc flash

 Personal injury from improper lifting techniques

To protect yourself and others, make sure you thoroughly read and understand the

safety information presented in this manual before operating the machine.

Generator

vibration

Generators vibrate in normal use. During and after the use of the generator, inspect

the generator as well as extension cords and power supply cords connected to it

for damage from vibration.

wc_si000625gb.fm

9

GV 5600A Safety Information

 Have damaged items repaired or replaced as necessary.

 Do not use plugs or or cords that show signs of damage such as broken or

cracked insulation or damaged blades.

Cleaning

When cleaning and servicing the machine:

 Keep the machine clean and free of debris such as leaves, paper, cartons, etc.

 Keep the labels legible.

When cleaning the machine:

 Do not clean the machine while it is running.

 Never use gasoline or other types of fuels or flammable solvents to clean the

machine. Fumes from fuels and solvents can become explosive.

wc_si000625gb.fm

10

Safety Information GV 5600A

1.3 Operating Safety

Operator

training

Before operating the machine:

 Read and understand the operating instructions contained in all manuals

delivered with the machine.

 Familiarize yourself with the location and proper use of all controls and safety

devices.

 Contact Wacker Neuson for additional training if necessary.

When operating this machine:

 Do not allow improperly trained people to operate the machine. People

operating the machine must be familiar with the potential risks and hazards

associated with it.

Operator

qualifications

Only trained personnel are permitted to start, operate, and shut down the machine.

They also must meet the following qualifications:

 have received instruction on how to properly use the machine

 are familiar with required safety devices

The machine must not be accessed or operated by:

 children

 people impaired by alcohol or drugs

Application

area

Be aware of the application area.

 Keep unauthorized personnel, children, and pets away from the machine.

 Remain aware of changing positions and the movement of other equipment and

personnel in the application area/job site.

Be aware of the application area.

 Do not operate the machine in areas that contain flammable objects, fuels, or

products that produce flammable vapors.

DANGER

Carbon monoxide. Using a generator indoors CAN KILL YOU IN MINUTES.

Generator exhaust contains carbon monoxide (CO). This is a poison you cannot

see or smell. If you can smell the generator exhaust, you are breathing CO. But

even if you cannot smell the exhaust, you could be breathing CO.

f NEVER use a generator inside homes, garages, crawlspaces, or other partly

enclosed areas. Deadly levels of carbon monoxide can build up in these areas.

Using a fan or opening windows and doors does NOT supply enough fresh air.

f ONLY use a generator outside and far away from windows, doors, and vents.

These openings can pull in generator exhaust.

f Even when you use a generator correctly, CO may leak into the home. ALWAYS

use a battery-powered or battery-backup CO alarm in the home.

f If you start to feel sick, dizzy, or weak after the generator has been running,

move to fresh air RIGHT AWAY. See a doctor. You could have carbon monoxide

poison.

wc_si000625gb.fm

11

GV 5600A Safety Information

 Always keep the machine at least one meter (three feet) away from structures,

buildings, and other equipment during use.

 Always keep the area immediately surrounding and underneath the machine

clean, neat, and free of debris and combustible materials. Make sure that the

area overhead is clear of debris that could fall onto or into the machine or

exhaust compartment.

Safety

devices,

controls, and

attachments

Only operate the machine when:

 All safety devices and guards are in place and in working order.

 All controls operate correctly.

 The machine is set up correctly according to the instructions in the Operator’s

Manual.

 The machine is clean.

 The machine’s labels are legible.

To ensure safe operation of the machine:

 Do not operate the machine if any safety devices or guards are missing or

inoperative.

 Do not modify or defeat the safety devices.

 Only use accessories or attachments that are approved by Wacker Neuson.

Safe

operating

practices

When operating this machine:

 Remain aware of the machine’s moving parts. Keep hands, feet, and loose

clothing away from the machine’s moving parts.

When operating this machine:

 Do not operate a machine in need of repair.

 Never operate the generator, or tools attached to the generator, with wet hands.

 Never enclose or cover the generator when it is in use or when it is hot.

 Do not overload the generator. The total amperage of the tools and equipment

attached to the generator must not exceed the load rating of the generator.

 Never stand on the machine.

Personal

Protective

Equipment

(PPE)

Wear the following Personal Protective Equipment (PPE) while operating this

machine:

 Close-fitting work clothes that do not hinder movement

 Safety glasses with side shields

 Hearing protection

 Safety-toed footwear

Installing as

backup power

Special hazards exist when installing this machine as a backup power supply.

Improper connection of generator to a building’s electrical system can allow

electrical current from the generator to backfeed into utility lines. This may result in

electrocution of utility workers, fire, or explosion.

wc_si000625gb.fm

12

Safety Information GV 5600A

If connected to a building’s electrical system, the generator must meet the power,

voltage, and frequency requirements of the equipment in the building. Differences

in power, voltage, and frequency requirements may exist and improper connection

may lead to equipment damage, fire, and personal injury or death.

Transporting

and installing

the machine

 Never allow untrained personnel to operate or service the generator. The

generator set should be set up by a certified electrician.

 Do not stand under the machine while it is being hoisted or moved.

 Do not attach equipment to the machine when it is suspended.

 Always transport the generator in an upright position.

 Always position and operate the generator on a firm, noncombustible, level

surface.

 Always make certain the machine is well-grounded and securely fastened to a

good earthen ground per national and local regulations.

 Always remove all tools, cords, and other loose items from the generator before

starting it.

Generator

vibration

Generators vibrate in normal use. During and after the use of the generator, inspect

the generator as well as extension cords and power supply cords connected to it

for damage from vibration.

 Have damaged items repaired or replaced as necessary.

 Do not use plugs or or cords that show signs of damage such as broken or

cracked insulation or damaged blades.

=

After use

 Store the machine properly when it is not being used. The machine should be

stored in a clean, dry location out of the reach of children.

WARNING

Backfeed from the generator into the public power distribution system can cause

serious injury or death to utility workers!

f Connections to a building’s electrical system must be made by a qualified elec-

trician and comply with all applicable laws and electrical codes.

wc_si000625gb.fm

13

GV 5600A Safety Information

1.4 Operator Safety while Using Internal Combustion Engines

Refueling

safety

When refueling the engine:

 Do not smoke.

 Do not refuel if the generator is sitting in a truck fitted with a plastic bed liner.

Static electricity can ignite the fuel or fuel vapors.

 Do not refuel a hot or running engine.

 Do not refuel the engine near an open flame.

When refueling the engine, always:

 Refill the fuel tank in a well-ventilated area.

 Replace the fuel tank cap after refueling.

Operating

safety

When operating the generator:

 Check the fuel lines and the fuel tank for leaks and cracks before starting the

engine.

 Do not run the machine if fuel leaks are present or the fuel lines are loose.

 Do not run the engine near open flames.

 Do not start the engine if fuel has spilled or a fuel odor is present. Move the

generator away from the spill and wipe the generator dry before starting.

 Do not smoke while operating the machine.

Cleaning

When cleaning and servicing the machine:

 Keep the machine clean and free of debris such as leaves, paper, cartons, etc.

 Keep the labels legible.

When cleaning the machine:

 Do not clean the machine while it is running.

 Never use gasoline or other types of fuels or flammable solvents to clean the

machine. Fumes from fuels and solvents can become explosive.

WARNING

Internal combustion engines present special hazards during operation and fueling.

Failure to follow the warnings and safety standards could result in severe injury or

death.

f Read and follow the warning instructions in the engine owner’s manual and the

safety guidelines below.

DANGER

f Carbon monoxide. Using a generator indoors CAN KILL YOU IN MINUTES.

Generator exhaust contains carbon monoxide (CO). This is a poison you cannot

see or smell. If you can smell the generator exhaust, you are breathing CO. But

even if you cannot smell the exhaust, you could be breathing CO.

wc_si000625gb.fm

14

Safety Information GV 5600A

1.5 Service Safety

In order for the equipment to operate safely and properly over a long period of time,

periodic maintenance and occasional repairs are necessary. If the generator is

experiencing problems or is being serviced, attach a “DO NOT START” sign to the

control panel to notify other people of its condition.

Service

training

Before servicing or maintaining the machine:

 Read and understand the instructions contained in all manuals delivered with

the machine.

 Familiarize yourself with the location and proper use of all controls and safety

devices.

 Only trained personnel shall troubleshoot or repair problems occurring with the

machine.

 Contact Wacker Neuson for additional training if necessary.

When servicing or maintaining this machine:

 Do not allow improperly trained people to service or maintain the machine.

Personnel servicing or maintaining the machine must be familiar with the

associated potential risks and hazards.

Precautions

Follow the precautions below when servicing or maintaining the machine.



Read and understand the service procedures before performing any service to the

machine.



All adjustments and repairs must be completed before operation. Do not operate the

machine with a known problem or deficiency.



All repairs and adjustments shall be completed by a qualified technician.



Turn off the machine before performing maintenance or making repairs.



Remain aware of the machine’s moving parts. Keep hands, feet, and loose clothing

away from the machine’s moving parts.



Reinstall the safety devices and guards after repair and maintenance procedures

are complete.



Do not allow water to accumulate around the base of the machine. If water is

present, move the machine and allow the machine to dry before servicing.



Do not service the machine if your clothing or skin is wet.



Always turn the engine off before servicing the machine. If the engine has electric

start, disconnect the negative terminal on the battery before servicing the machine.



Always let the engine cool before transporting or servicing the machine.

Machine

modifications

When servicing or maintaining the machine:



Use only accessories/attachments that are approved by Wacker Neuson.

WARNING

Poorly maintained equipment can malfunction, causing personal injuries or

equipment damage.

f Do not operate a machine in need of repair.

wc_si000625gb.fm

15

GV 5600A Safety Information

When servicing or maintaining the machine:



Do not defeat safety devices.



Do not modify the machine without the express written approval of Wacker Neuson.

Replacing

parts and

labels



Replace worn or damaged components.



Replace all missing and hard-to-read labels.



When replacing electrical components, use components that are identical in rating

and performance as the original components.



When replacement parts are required for this machine, use only Wacker Neuson

replacement parts or those parts equivalent to the original in all types of

specifications, such as physical dimensions, type, strength, and material.



Always keep the fuel lines in good condition and properly connected. Leaking fuel

and fumes are extremely explosive.

Lifting and

transporting

When lifting the machine:



Make sure slings, chains, hooks, ramps, jacks, and other types of lifting devices are

attached securely and have enough weight-bearing capacity to lift or hold the

machine safely. See chapter Technical Data.



Remain aware of the location of other people when lifting the machine.



Make sure the transporting vehicle has sufficient load capacity and platform size to

safely transport the machine. See chapter Technical Data.

To reduce the possibility of injury:



Do not stand under the machine while it is being lifted or moved.



Do not get onto the machine while it is being lifted or moved.

Cleaning

When cleaning and servicing the machine:



Keep the machine clean and free of debris such as leaves, paper, cartons, etc.



Keep the labels legible.

When cleaning the machine:



Do not clean the machine while it is running.



Never use gasoline or other types of fuels or flammable solvents to clean the

machine. Fumes from fuels and solvents can become explosive.

Personal

Protective

Equipment

(PPE)

Wear the following Personal Protective Equipment (PPE) while servicing or maintaining

this machine:



Close-fitting work clothes that do not hinder movement



Safety glasses with side shields



Hearing protection



Safety-toed footwear

In addition, before servicing or maintaining the machine:



Tie back long hair.



Remove all jewelry (including rings).

wc_si000625gb.fm

16

Safety Information GV 5600A

Notes:

GV 5600A Labels

wc_si000608gb.fm 17

2 Labels

2.1 Label Locations

2.2 Label Meanings

Wacker Neuson machines use international pictorial labels where

needed. These labels are described below.

A

DANGER!

No sparks, flames or burning objects near

machine.

Shut off the engine before refueling.

B

WARNING!

Hot surface

G

H

B

F

J

A

ED

C

wc_gr005147

Labels GV 5600A

18 wc_si000608gb.fm

C

Improper connection of generator to a building’s

electrical system can allow electrical current

from the generator to backfeed into utility lines.

This may result in electrocution of utility work-

ers, fire, or explosion. Connections to a build-

ing’s electrical system must be made by a

qualified electrician and comply with all applica-

ble laws and electrical codes.

D

—

Close main circuit breaker.

—

CAUTION!

Use only clean, filtered gasoline fuel.

Check the fuel level.

—

Open the fuel flow valve.

—

Close the choke.

—

Turn the engine switch to the ON position.

—

Pull the rewind starter.

GV 5600A Labels

wc_si000608gb.fm 19

—

Open the choke.

—

Open main circuit breaker.

—

Turn the engine switch to “OFF”.

—

Close the fuel flow valve.

E

Electrical ground

F

DANGER

Using a generator indoors CAN KILL YOU IN MINUTES. Generator exhaust contains carbon mon-

oxide. This is a poison you cannot see or smell.

—

NEVER use inside a home or garage, EVEN IF

doors and windows are open.

—

Only use OUTSIDE and far away from win-

dows, doors, and vents.

Labels GV 5600A

20 wc_si000608gb.fm

G

A nameplate listing the model number, item

number, revision number, and serial number is

attached to each unit. Please record the infor-

mation found on this nameplate so it will be

available should the nameplate become lost or

damaged. When ordering parts or requesting

service information, you will always be asked to

specify the model number, item number, revi-

sion number, and serial number of the unit.

H

Important Emissions Information

This equipment meets California EVP emission

regulations for small off-road engines.

J

Choke lever

La page charge ...

Wacker Neuson GV5600 Manuel utilisateur

Wacker Neuson GV5600 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents