La page est en cours de chargement...
ALASKA-C
Version 05/22 item no. 1-030-269
INSTRUCTIONS FOR INSTALLATION
English EN
DE
FR
IT
PL
PT
Solid wood sauna
ALASKA
CORNER
206 x 206 x 204 cm
Table of Contents
1. Preparing for installation 3
1.1. Important note 3
1.2. Tools required 4
1.3. Maintenance and cleaning 5
1.4. Disposal 5
1.5. ALASKA CORNER parts list 6
2. Cabin installation 8
2.1. Base frame installation 8
2.2. Wall element assembly 9
2.3. Ceiling installation 17
2.4. Ventilation slit installation 19
2.5. Installinginteriorttings 19
2.6. Installing accessories 26
2.7. Installing glass door 28
2.8. Installing roof trim 30
2.9. Installing ceiling cover slat 31
3. Floor plan 32
3.1. Leftoorplan 32
3.2. Rightoorplan 33
3.3. Changesfortherightoorplaninstallation 34
EN
Instructions for installation p. 3/36
1. Preparing for installation
Read these assembly instructions carefully and keep them within reach when
using the sauna so that you can look up product information at any time.
1.1. Important note
●Before you begin work, check the parts list to ensure that all the individual
parts have been delivered. If you discover any missing parts, notify your
dealer within 14 days of receiving the sauna cabin.
●The room that the sauna is installed in must be dry and ensure an appropriate
amount of air circulation.
● Theoormustbelevelandeven,preferablyastoneortiledoor.
●A minimum room height of 230 cm is required for the cabin installation work.
●A distance of at least 5 cm from the wall must be maintained.
●The inside of the wooden parts used must not be handled with any impreg-
nating material.
●Wood is a natural product that can swell, shrink or warp, despite good stor-
age. For this reason, some force may be necessary during the installation.
●Air circulation in the sauna cabin is crucial for correct function. Please observe
thedimensionsfortheairintakeandoutletventsspeciedbythemanufacturer
of the sauna heater. If necessary, cut a rectangular cutout into the base frame
before installation; holes can also be made later using a drill.
● Allscrewttingsmustbepre-drilled.
●You need an assistant for assembly.
Attention!
The electrical connection may only be performed by a qualied electrician
or similarly qualied person.
These installation instructions can also be found in the downloads section
of our website: www.sentiotec.com/downloads.
Instructions for installation p. 4/36
This symbol indicates tips and useful information
Pre-drill
Cut to real measurement with backsaw
60 cm
80 cm
100 cm
Check the right angle:
Handle glass with care: Special care must be taken with the edges of
the glass – hardened glass can shatter into small pieces in the event of
impact. Insert protective cushioning (e.g: cardboard box) under the edge
of the glass.
1.2. Tools required
●Hammer with a wooden head or a mallet
●Cordless screwdriver with bits for cross-head screws and Torx
●Roller tape measure
●Drill bits with a diameter of 3 mm, 10 mm, 20 - 30 mm
(for sauna heater power cable)
●Spirit level
●1.5 mm hexagonal socket wrench
●Utility knife
●Ladder
●Backsaw
EN
Instructions for installation p. 5/36
1.3. Maintenance and cleaning
●The sauna should be cleaned with a damp cloth. Only use warm water – no
cleaning products.
●We recommend heating the cabin once a month if the sauna is not used for
a long time.
Pitch pockets are not grounds for return, since they can always appear in
spruce wood and the depth at which they lie cannot be detected during
the sorting-out process.
If these are just under the surface, heat can cause them to soften and
“bleed”.
The leaking pitch can be removed with a rag soaked in acetone. If only
droplets of pitch occur, allow these to harden and then carefully scrape
themowithaknife.
1.4. Disposal
●Please dispose of packaging materials in accordance with the appli-
cable disposal regulations.
●Used units contain reusable materials as well as hazardous substanc-
es. Therefore, do not dispose of your used unit with household waste,
but rather do so in accordance with the locally applicable regulations.
Instructions for installation p. 6/36
Base frame
2 Base frame 204 x 9 x 4 cm
1 Base frame 138 x 9 x 4 cm
1 Base frame 61.2 x 9 x 4 cm
Wall elements
4 A/B wall elements 193 x 48 x 4 cm
3 A/B wall elements with Multiclip 193 x 48 x 4 cm
1 A/A electrical element with Multiclip 193 x 44 x 4 cm
1 A/B ventilation element with Multiclip 193 x 48 x 4 cm
1 A/A wall element with Multiclip 193 x 44 x 4 cm
1 A/A wall element 193 x 44 x 4 cm
1 A/A wall element with Multiclip 193 x 55.2 x 4 cm
1 Element above the door 69.3 x 10.1 x 4 cm
1 Element above the glass element 72.3 x 8.6 x 4 cm
Ceiling elements
2 A/B ceiling elements 194 x 48 x 4 cm
1 A/B ceiling element 194 x 49 x 4 cm
1 A/A ceiling element, diagonal 186 x 49 x 4 cm
Corner posts
3 90° corner posts with Multiclip 193 x 6 x 6 cm
1 45° corner posts next to door with Multiclip 202 x 7.8 x 4 cm
1 45° corner posts next to door with groove 202 x 7.8 x 4 cm
1
Post for glass element, 8 mm groove with Multiclip
202 x 4.5 x 4 cm
Support slats
1 Roof support slat 197 x 4 x 4 cm
1 Roof support slat 193 x 4 x 4 cm
2 Roof support slat 1 x 45° 141.6 x 4 x 4 cm
1 Roof support slats 2 x 45° 89.7 x 4 x 4 cm
1 Roof support slat 196 x 1.2 x 4 cm
1 Roof support slat 192 x 1.2 x 4 cm
2 Roof support slat 1 x 22.5° 141.2 x 1.2 x 4 cm
1 Roof support slat 1 x 22.5° 83.2 x 1.2 x 4 cm
1 Bench support slat 1 x 45° 142.3 x 4 x 4 cm
1 Bench support slat 120 x 4 x 4 cm
3 Bench support slats 58 x 4 x 4 cm
2 Mounting slats for bench screen 26 x 4 x 4 cm
1.5. ALASKA CORNER parts list
No. of
items Name Dimensions
EN
Instructions for installation p. 7/36
No. of
items Name Dimensions
Interior ttings
2 Benches 195 x 62 x 9 cm
1 Bench 133.5 x 62 x 9 cm
1 Bench cover strip 72.3 x 14 x 2 cm
2 Backrests 186 x 26 x 5 cm
1 Bench screen 195 x 35 x 5 cm
1 Heater safety guard, 3 parts 57 x 475 x 75 cm
1 x 57 x 75 cm, 2x 45.5 x 55 cm
1 Floor grid 70 x 53 x 4 cm
2 Headrests 43 x 25 x 7 cm
1 Lamp protection grille 38 x 32 x 4 cm
1 Ventilation slit 52 x 14 x 1.5 cm
Glass elements
1 Glass door 191.5 x 68 x 0.8 cm
1 Glass element 194.5 x 75.5 x 0.8 cm
Roof trim slats
2 Roof trim slat 1 x 22.5° 149.8 x 6 x 4 cm
1 Roof trim slat 1 x 22.5° 86.5 x 6 x 4 cm
Accessories
1Ualuminiumprole 72.3 x 1.2 x 1.5 cm
1 Door handle set wood/stainless steel
1 2 door hinges 8653-02
1 Door magnet, sleeve plate
1 Sauna lamp
1 3 Silicon cables: 5 x 2.5 mm2
1 3 Silicon cables: 3 x 1.5 mm2
1 Template for Multiclip installation
1 Installation material set
1 Installation instructions
Instructions for installation p. 8/36
2. Cabin installation
Thecabincanhavearightorleftset-up;pleasenotethecorrespondingoor
plans on page 32 and page 33.
2.1. Base frame installation
Left oor plan
Right oor plan
204 cm
61.2 cm
138 cm
204 cm
138 cm
204 cm
204 cm
61.2 cm
3 mm drill bit, 3 screws 4 x 70 mm
3 mm drill bit, 3 screws 4 x 70 mm
EN
Instructions for installation p. 9/36
2.2. Wall element assembly
The corner posts are connected to the wall elements using Multiclips. The other
wall elements are connected tongue and groove and are screwed together.
Left oor plan
*
*
* *
*
*
* Multiclips
Attention!
Theinstallationsubsequentlydescribedisfortheleftoorplan.
Forchangesaectingtheinstallationfortherightoorplan,seepage33.
* *
A always refers to the visible side. This is labelled on the top side of the
wall elements.
Instructions for installation p. 10/36
Pre-assemblethewallelementswiththecornerpostsontheoorand
then place these posts on the base frame.
Insert the corner post from above down onto the wall elements. When doing this,
ensure that the Multiclips are correctly aligned (see below). The corner post must
beushwiththewallelements.
Multiclip
Installing corner posts with wall elements
EN
Instructions for installation p. 11/36
Installing wall elements
Electrical element
The electrical element has drill holes for laying cables. For the position
seeoorplansonpage32andpage33.
Instructions for installation p. 12/36
Screwing wall elements together
3 mm drill bit, 8 screws 4 x 70 mm
Check the right angle before screwing the wall elements together.
Observe the tip on page 4.
EN
Instructions for installation p. 13/36
Corner post and post for glass
Instructions for installation p. 14/36
Glass element
3 mm drill bit,
1 screw 4 x 70 mm
3 mm drill bit,
1 screw 4 x 70 mm
EN
Instructions for installation p. 15/36
Element above the door
3 mm drill bit,
1 screw 4 x 70 mm
3 mm drill bit,
1 screw 4 x 70 mm
Instructions for installation p. 16/36
EN
Instructions for installation p. 17/36
2.3. Ceiling installation
Roof support slats
4 cm
Screws 4 x 70 mm
Instructions for installation p. 18/36
Ceiling elements
3 mm drill bit, 19 screws 4 x 70 mm
1 cm
1 cm
17 screws 4 x 70 mm
49 cm 48 cm
48 cm 49 cm
EN
Instructions for installation p. 19/36
2.4. Ventilation slit installation
2.5. Installing interior ttings
Bench support slats
2 screws 4 x 60 mm
3 mm drill bit, 3 screws 5 x 70 mm
3 mm drill bit, 4 screws 3 x 40 mm
82 cm
Instructions for installation p. 20/36
3 mm drill bit, 3 screws 5 x 70 mm
36 cm
82 cm
3 mm drill bit, 3 screws 5 x 70 mm
/