Watchguard AP327X Hardware Guide

Marque: Watchguard

Modèle: AP327X

Catégorie: Antennes réseau

Taper: Hardware Guide

WatchGuard

AP327X

Hardware

Guide

AP327X / O-105E

Outdoor Access Point

ii WatchGuard AP327X

ADDRESS

505 Fifth Avenue South

Suite 500

Seattle, WA 98104

SUPPORT

www.watchguard.com/support

U.S. and Canada +877.232.3531

All Other Countries +1.206.521.3575

SALES

U.S. and Canada +1.800.734.9905

All Other Countries +1.206.613.0895

ABOUT WATCHGUARD

WatchGuard® Technologies, Inc. is a global leader of integrated, multi-function

business security solutions that intelligently combine industry standard hardware,

best-of-breed security features, and policy-based management tools. WatchGuard

provides easy-to-use, but enterprise-powerful protection to hundreds of thousands of

businesses worldwide. WatchGuard is headquartered in Seattle, Wash. with offices

throughout North America, Europe, Asia Pacific, and Latin America.

To learn more, visit WatchGuard.com.

WatchGuard, the WatchGuard logo, LiveSecurity, and any other mark listed as a trademark in the “Terms of Use” portion of

the WatchGuard Web site that is used herein are either registered trademarks or trademarks of WatchGuard Technologies,

Inc. and/or its subsidiaries in the United States and/or other countries. All other trademarks are the property of their

respective owners.

Printed in the United States of America.

Revised: November 21, 2019

Companies, names, and data used in examples herein are fictitious unless otherwise noted. No part of this guide may be

reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express

written permission of WatchGuard Technologies, Inc.

Complete copyright, trademark, patent, and licensing information can be found in

the WatchGuard product documentation. You can find this document online at:

https://www.watchguard.com/help

Hardware Guide 1

Hardware Specifications

The WatchGuard® AP family of wireless access points provide secure, reliable, wireless communications while

delivering high performance and broad coverage—a perfect combination of services to meet the needs of

enterprise-level customers, small businesses, branch offices, campuses, and hotels alike.

The WatchGuard AP327X is intended for outdoor use and features an IP67 waterproof rating, 2X2 MU-MIMO

802.11ac Wave 2 capabilities, and dual radios that support 2.4GHz (802.11b/g/n) and 5GHz (11a/n/ac) to

provide wireless clients with enhanced reliability and performance. Power can be provided by any PoE+

(Power over Ethernet) power source.

There are two ways you can manage your AP327X:

Total Wi-Fi and Secure Wi-Fi with WatchGuard Wi-Fi Cloud

A powerful cloud-based enterprise wireless management solution for AP configuration, security, and

monitoring.

Basic Wi-Fi with WatchGuard Firebox Gateway Wireless Controller

Local management, configuration, security, and monitoring of APs directly from your WatchGuard

Firebox. The WatchGuard Firebox requires Fireware v12.5 and higher.

For more information about how to set up and manage your WatchGuard AP, you can find documentation

online at: https://www.watchguard.com/help

Package Contents

 WatchGuard AP327X

 Quick Start Guide

 Wall-mount accessories and stencil

 Pole mount accesorries

 Ground wire

2 WatchGuard AP327X

Hardware Specifications

About Your Hardware

Hardware Specifications

Environmental Requirements

To safely install your WatchGuard AP, we recommend that you:

 Install the device indoors or outdoors, preferably under cover.

 Make sure the device has adequate clearance for air flow and cooling.

Other environmental requirements:

AP327X

IP Rating IP67

Radio Type and

Frequency Band

2.4GHz, 802.11b/g/n. Max data rate: 300 Mbps

5GHz, 802.11a/n/ac. Max data rate: 867 Mbps

Antenna 2 N-Type external antennas 2.4 GHz

2 N-Type external antennas 5 GHz

Diminsions: 7.3” x 0.83” x 0.83” (186.0mm x 21.2mm x21.2mm)

Weight: 0.35 lbs (0.14 kg) / per pair

* Sold separately

Ethernet interface 1 x 10/100/1000 Mbps Gigabit Ethernet (LAN1)

802.3at PoE+ capable

1 x 10/100/1000 Mbps Gigabit Ethernet (LAN2) for wired extension

Power Interface LAN1 PoE+ (802.3at), 48V

Power

Consumption

Max: 19 W

Min: 11 W

Average: 16 W

MTBF (Mean Time

Between Failures)

4,544,476 hours at 25°C / 77°F

998,437 hours at 65°C / 149°F

Dimensions 8.42” x 8.42” x 2.66” (213.9mm × 213.9mm × 67.5mm)

Weight 3.95 lbs (1.78 kg)

Operating temperature -40°C to 65°C (-40°F to 149°F)

Operating relative humidity 5% to 95% non-condensing

Non-operating temperature -40°C to 70°C (-40°F to 158°F)

Non-operating relative humidity 5% to 95% non-condensing

Hardware Guide 3

Hardware Specifications

Hardware Description

Device Connections and Buttons

Ethernet Network Interfaces

LAN1: Standard RJ45 connector that supports link speeds of 10/100/1000 Mbps and 802.3at PoE+

connectivity. The WatchGuard AP327X can be powered by an PoE+ connection on the LAN1

interface.

LAN2: Standard RJ45 connector that supports link speeds of 10/100/1000 Mbps. This interface can be

used as a wired extension for a wireless SSID that has NAT enabled. For more information on how to

configure NAT settings for an SSID, see the WatchGuard Wi-Fi Cloud Help. 



For APs managed locally by a Gateway Wireless Controller, you can bridge together the LAN ports on

AP models that have two LAN interfaces. This enables you to extend the wired network on the LAN2

interface. For more information, see the Fireware Help.

Reset Button

Resets the WatchGuard AP to factory-default settings.

 You must use a Phillips screwdriver to remove the cover screw for the reset button. Use a paper clip

or other small object to press the reset button through the hole.

 Press and hold the reset button for up to 10 seconds until all LEDs go off to indicate that the AP has

rebooted

4 WatchGuard AP327X

Hardware Specifications

Device Indicators

The AP327X has these LED indicators:

AP Firmware 8.8.1 and Higher

LED

Status

Power LAN 1 and

LAN2

2.4 GHz and 5 GHz

Radios

Off Powered off. No Ethernet

link.

Radio inactive.

Green Powered on. Operating at normal

power and capabilities.

(PoE+ or DC power)

Connected at

10/100/1000

Mbps.

Radio active.

Flashing

Green

Not connected to Wi-Fi Cloud or

paired with a Gateway Wireless

Controller.

Orange Powered on. Operating at reduced

power and capabilities.

(For example: PoE 802.3af)

See AP Power Requirements

- -

Flashing

Orange

No IP address received from DHCP. - -

Hardware Guide 5

Hardware Specifications

AP Firmware 8.8.0 and Lower

LED

Status

Power LAN 1 and

LAN2

2.4 GHz and 5 GHz

Radios

Off Powered off. No Ethernet

link.

Radio inactive.

Green Powered on. Connected at

10/100/1000

Mbps.

Radio active. No clients

connected.

Flashing

Green

- Network

activity.

Wireless radio activity.

6 WatchGuard AP327X

Hardware Specifications

Mounting Instructions

Your package includes pole-mount and wall-mount accessories for your AP.

The MAC address and serial number of your AP are printed on a label on the back of the device. 

Make sure you record this information before you mount the AP.

Pole Mount Installation

Use the supplied pole-mounting accessories to install the AP327X on a pole.

1. Place the AP on the pole.

2. Insert the clamps in the slots on the AP and wrap around the pole.

3. Fasten the screws and make sure the AP is firmly attached to the pole.

Hardware Guide 7

Hardware Specifications

Wall Mount Installation

Use the supplied wall-mounting accessories to install the AP327X on a wall.

1. Use the included stencil to drill holes on the wall for the anchors.

2. Insert the four anchors.

3. Affix the mounting bracket to the wall with the included anchor screws.

4. Attach the AP to the mounting bracket.

5. Insert the mounting screws in the slots of the mounting bracket.

6. Fasten the screws.

8 WatchGuard AP327X

Hardware Specifications

Connect the Ground Wire

To make sure your outdoor AP is safely protected from electrical events, we recommend you ground the AP

according to your local regulations.

Use the included screw to attach the ground wire to the ground connector on the back of the AP and to a

nearby grounding point.

Hardware Guide 9

Hardware Specifications

Antenna Installation

WatchGuard dual-band omnidirectional dipole antennas (WG9004) are sold separately in packs of two

antennas.

On the top of the AP327X, there are two N-type connectors each for the 2.4 GHz radio and the 5 GHz radio.

Insert the antennas into the connectors and turn clockwise to tighten.

You can use a combination of WatchGuard omnidirectional and other third-party omnidirectional and

directional antennas based on your deployment requirements.

If you use other third-party antenna types, you are responsible for verifying compliance with regional

based regulations on Equivalent Isotropically Radiated Power (EIRP). The maximum power output +

antenna gain = EIRP. For example, the maximum EIRP defined by the FCC in the U.S. for 2.4 GHz is 30

dBm (1 Watt), and 5GHz is 5.15-5.25 23 dBm (200mW), 5.25-5.35 30dBm (1W), and 5.72-5.85 36 dBm

(4W).

10 WatchGuard AP327X

Hardware Specifications

Connect the AP

To power on and connect the AP327X to the network:

1. Plug one end of an Ethernet cable into the LAN1 (PoE) port on the AP.

Make sure you insert the Ethernet cable correctly through the waterproof assembly before you tighten

the LAN port cap.

2. Plug the other end into a PoE+ (802.3at) compatible switch or PoE+ injector.

Hardware Guide 11

Hardware Specifications

How to Assemble the Weatherproof Connector

Use these instructions to connect the Ethernet cable to the AP through the weatherproof connector.

12 WatchGuard AP327X

Hardware Specifications

How to Disassemble the Weatherproof Connector

Use these instructions to disconnect the Ethernet cable from the weatherproof connector.

Hardware Guide 13

Hardware Specifications

Ethernet Power Injector (Optional)

You can also power the AP327X with an optional Ethernet Power Injector. The PoE+ power injector enables

you to power the AP through an existing Ethernet connection. With this device, you do not have to position

your AP near a power outlet.

This device complies with IEEE 802.3at/af PoE specifications. Do not use any PoE adapters that are not

IEEE 802.3at/af compliant as they may damage your device.

Connect the Ethernet Power Injector

To connect an Ethernet Power Injector to the WatchGuard AP:

1. Plug the Ethernet Power Injector into an AC power source.

2. Connect an Ethernet cable from your network backbone (for example, PoE+ capable router, switch, or

hub) to the LAN connector on the Ethernet Power Injector.

3. Connect an Ethernet cable from the LAN1 (PoE) interface on the AP to the PoE port on the Ethernet

Power Injector.

14 WatchGuard AP327X

Hardware Specifications

Ethernet Power Injector Specifications

Ethernet Power Injector

WatchGuard Part # 802.3at PoE+ Injector with AC cord (US/FCC) (WG8599)

802.3at PoE+ Injector with AC cord (CE) (WG8600)

802.3at PoE+ Injector with AC cord (UK) (WG8601)

802.3at PoE+ Injector with AC cord (AUS) (WG8602)

Specification IEEE 802.3at/af

AC Input Voltage Rating 100 to 240VAC

Input Current 0.8A Max for 100VAC

Output Power 30W maximum

Ethernet Interfaces LAN: RJ-45 for 10/100/1000 Mbps data

POE: RJ-45 for 10/100/1000 Mbps data and power

Voltage: Pin4, 5:54V, Pin7, 8:Return

Indicator Power: Green

Temperature Operating: 0°C to 40°C (32°F to 104°F)

Storage: -30°C to 80°C (-22°F to 176°F)

Humidity 5 to 90% (Operating and storage)

Dimensions L = 3.9” (99 mm)

W = 2.27” (68.5 mm)

H = 1.3” (33 mm)

Weight 0.33 lbs (149.6 g)

Hardware Guide 15

Legal and Regulatory Information

Safety Notices

All WatchGuard products are designed and tested to meet strict safety requirements. These requirements

include product safety approvals and other global compliance standards. Read these instructions carefully

before you operate the product, and refer to them as needed for continued safe operation of your product.

Product Safety Certification

The WatchGuard product is safety certified under the following standards:

 IEC 60950-1:2005 (Second Edition)+Am 1:2009+Am 2:2013

 EN 60950-1:2006+A11+A1+A12+A2:2013

 EN 55024:2010

 EN 55032:2015/AC/2016

 EN 62311:2008

 EN 61000-3-2:2014

 EN 61000-3-3:2013

Safety Warning

 Do not place objects on the power cord.

 Do not obstruct the ventilation openings. These openings prevent overheating of the machine.

 Never push objects of any kind into slots or openings on this equipment. Making a contact with a

voltage point or shorting out a part may result in fire or electrical shock.

 When removing or installing an appliance, follow the general installation safety instructions.

Disclaimer

WatchGuard shall not be held liable if the end user alters, modify, or repairs any WatchGuard hardware

appliance.

16 WatchGuard AP327X

Legal and Regulatory Information

HINWEISE ZUR SICHERHEIT

Alle WatchGuard Produkte werden entwickelt und getestet, um strenge Sicherheitsanforderungen zu

erfüllen. Diese Anforderungen umfassen Produktsicherheit Zulassungen und andere globale Compliance-

Standards. Bitte lesen Sie die folgenden Anweisungen sorgfältig, bevor Sie das Produkt, und bezeichnen sie

als notwendig, um den sicheren Betrieb des Geräts zu gewährleisten. Weitere Informationen finden Sie in der

elektronischen Hardware Guide.

Die WatchGuard Produkt ist Sicherheit unter den folgenden Normen zertifiziert:

 IEC 60950-1:2005 (Second Edition)+Am 1:2009+Am 2:2013

 EN 60950-1:2006+A11+A1+A12+A2:2013

 EN 55024:2010

 EN 55032:2015/AC/2016

 EN 62311:2008

 EN 61000-3-2:2014

 EN 61000-3-3:2013

Sicherheitshinweis

 Legen Sie keine Gegenstände auf das Netzkabel.

 Verdecken Sie nicht die Lüftungsöffnungen. Diese Öffnungen verhindern eine Überhitzung der

Maschine.

 Stecken Sie niemals Gegenstände jeglicher Art in die Schlitze oder Öffnungen des Geräts stecken. Der

Kontakt mit einem spannungsführenden Punkt oder das Kurzschließen eines Bauteils kann zu einem

Brand oder elektrischen Schlag führen.

 Beim Entfernen oder Installieren eines Gerätes, nach den allgemeinen Installation Sicherheitshinweise.

AVISO DE SEGURIDAD

Todos los productos WatchGuard están diseñados y probados para satisfacer estrictos requisitos de

seguridad. Estos requisitos incluyen la homologación de productos de seguridad y otras normas de

cumplimiento global. Por favor, lea atentamente las siguientes instrucciones antes de utilizar el producto, y se

refieren a ellos como sea necesario para garantizar el funcionamiento seguro y continuo de su producto.

Información adicional se puede encontrar en la Guía del usuario electrónica.

Certificación de seguridad del producto

El producto tiene certificación de seguridad WatchGuard bajo las siguientes normas:

 IEC 60950-1:2005 (Second Edition)+Am 1:2009+Am 2:2013

 EN 60950-1:2006+A11+A1+A12+A2:2013

 EN 55024:2010

 EN 55032:2015/AC/2016

 EN 62311:2008

 EN 61000-3-2:2014

 EN 61000-3-3:2013

Advertencia de seguridad

 No coloque objetos sobre el cable de alimentación.

 No obstruya las aberturas de ventilación. Estas aberturas evitan el sobrecalentamiento de la máquina.

 Nunca introduzca objetos de ningún tipo en las ranuras o aberturas del equipo. El contacto con puntos

de voltaje o el cortocircuito de una pieza podría provocar un incendio o una descarga eléctrica.

 Al extraer o instalar un electrodoméstico, siga las instrucciones generales de instalación de seguridad.

Hardware Guide 17

Legal and Regulatory Information

FCC Certification

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation If

this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

 Consult the dealer or an experienced radio/TV technician for help.

* FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

For operation within 5.15 ~ 5.25GHz / 5.47 ~5.725GHz frequency range, it is restricted to indoor environment.

The band from 5600-5650MHz will be disabled by the software during the manufacturing and cannot be

changed by the end user. This device meets all the other requirements specified in Part 15E, Section 15.407 of

the FCC Rules.

Section 15.204(b) states that an approved "transmission system" must always be marketed as a complete

system including the antenna. This device is restricted to indoor use.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum distance 32cm between the radiator & your body.

For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other

channels is not possible.

Dieses Gerät wurde getestet und entspricht den Grenzwerten für ein Digitalgerät der Klasse B gemäß Teil 15

der Federal Communications Commission (FCC) Regeln einhalten. Diese Grenzwerte sollen einen

angemessenen Schutz vor schädlichen Störungen, wenn das Gerät in einer kommerziellen Umgebung

betrieben wird. Dieses Gerät erzeugt, verwendet und kann Hochfrequenzenergie abstrahlen, und wenn nicht

installiert und in Übereinstimmung mit der Bedienungsanleitung, kann es Störungen im Funkverkehr

verursachen. Der Betrieb dieses Gerätes in einem Wohngebiet wird wahrscheinlich schädliche Interferenzen

in dem Fall muss der Benutzer die Störungen auf seine / ihre eigene Kosten zu beheben.

18 WatchGuard AP327X

Legal and Regulatory Information

CE Notice

The CE symbol on your WatchGuard Technologies equipment indicates that it is in compliance with the

Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union

(EU).

This equipment should be installed and operated with minimum distance 32cm between the radiator & your

body.

All operational modes:

2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40)

5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80)

Industry Canada Certification

This device complies with ISED's licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d' ISED applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage

préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de

provoquer un fonctionnement indésirable.

IMPORTANT NOTE:

IC Radiation Exposure Statement:

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 32 cm between the radiator & your

body.

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement

non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 32 cm de distance entre la

source de rayonnement et votre corps.

Caution:

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for

harmful interference to co-channel mobile satellite systems;

les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à

l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les

mêmes canaux;

(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall

be such that the equipment still complies with the e.i.r.p. limit;

le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5250 à 5 350 MHz et de 5470 à

5725 MHz doit être conforme à la limite de la p.i.r.e;

La page charge ...

Watchguard AP327X Hardware Guide

Marque: Watchguard

Modèle: AP327X

Catégorie: Antennes réseau

Taper: Hardware Guide

Télécharger le PDF

rapport

dans d''autres langues

English: Watchguard AP327X

Watchguard AP327X Hardware Guide

Watchguard AP327X Hardware Guide

dans d''autres langues

Documents connexes

Autres documents