AT&T TL90071 Manuel utilisateur

User’s manual

TL90031/TL90041/TL90051/

TL90061/TL90071

DECT 6.0 expansion handset

for use with AT&T models

TL92271/TL92321/TL92371/

TL92421/TL92471/TL96151/

TL96271/TL96371/TL96451/

TL96471

with BLUETOOTH® wireless technologyBLUETOOTH® wireless technology wireless technology

Model number: TL90031/TL90041/TL90051/

TL90061/TL90071/

Type: DECT 6.0 expansion handset

Serial number:

Purchase date:

Place of purchase:

Both the model and serial number of your AT&T product can be

found on the bottom of the handset charger.

Save your sales receipt and original packaging in case it is

necessary to return your telephone for warranty service.

The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such

marks by Advanced American Telephones and its parent, VTech Holdings Limited, is under

license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and

trade names are those of their respective owners.

the AT&T logo are trademarks of AT&T Intellectual Property licensed to

Advanced American Telephones, San Antonio, TX 78219. Printed in China.

Congratulations

on purchasing your new AT&T product. Before using this AT&T

product, please read Important safety information on

pages 22-24

of this user’s manual. Please thoroughly read the user’s manual for

all the feature operations and troubleshooting information you need

to install and operate your new AT&T product. You can also visit our

website at www.telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

This telephone meets the California Energy Commission regulations

for energy consumption. Your telephone is set up to comply with the

energy-conserving standards right out of the box. No further action

is necessary.

The ENERGY STAR® program (www.energystar.gov) recognizes and

encourages the use of products that save energy and help protect

our environment. We are proud to mark this product with the ENERGY

STAR® label indicating it meets the latest energy efficiency guidelines.

T

Compatible with

Hearing Aid T-Coil

TIA-1083

Telephones identified with this logo have reduced noise and

interference when used with most T-coil equipped hearing aids and

cochlear implants. The TIA-1083 Compliant Logo is a trademark of the

Telecommunications Industry Association. Used under license.

Parts checklist

Your telephone package contains the following items. Save your

sales receipt and original packaging in the event warranty service

is necessary.

Cordless handset

Charger for cordless

handset with power

adapter installed

Battery for

cordless handset

Battery compartment

cover

User’s manual

BY 1021

BT183342/BT283342

2.4V 400mAh Ni-MH

User’s manual

TL90031/TL90041/TL90051/

TL90061/TL90071/

DECT 6.0 expansion handset

for use with AT&T models

TL92271/TL92321/TL92371/

TL92421/TL92471/TL96151/

TL96271/TL96371/TL96451/

TL96471

with BLUETOOTH® wireless technologyBLUETOOTH® wireless technology wireless technology

Table of contents

Getting started

Installation ................................................................................................................ 1

Quick reference guide - handset ................................................................... 2

Charger installation .............................................................................................. 5

Battery installation and charging .................................................................. 6

Registration and deregistration

Adding and registering handsets .................................................................. 8

Register a handset to your telephone base ...................................... 8

Deregistering handsets ....................................................................................10

Deregister all handsets from the telephone base ........................10

Appendix

Troubleshooting ...................................................................................................12

Maintenance...........................................................................................................21

Important safety information ........................................................................22

Safety information .........................................................................................22

Especially about cordless telephones .................................................23

Precautions for users of implanted cardiac pacemakers ..........24

Pacemaker patients ......................................................................................24

Especially about telephone answering systems ............................24

For C-UL compliance .........................................................................................25

Mesures de sécurité importantes ..........................................................25

FCC Part 68 and ACTA......................................................................................29

FCC Part 15 ............................................................................................................31

California Energy Commission battery charging testing instructions .....32

Limited warranty ..................................................................................................33

Technical specifications ...................................................................................36

DECT 6.0 digital technology .....................................................................36

Telephone operating range ......................................................................36

Redefining long range coverage and clarity ....................................36

HD audio ............................................................................................................36

User’s manual

TL90031/TL90041/TL90051/TL90061/TL90071

DECT 6.0 expansion handset

for use with AT&T models

TL92271/TL92321/TL92371/TL92421/

TL92471/TL96151/TL96271/TL96371/

TL96451/TL96471

with BLUETOOTH® wireless technologyBLUETOOTH® wireless technology wireless technology

1

Your product may be shipped with a protective sticker covering

the handset display - remove it before use.

For customer service or product information, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In

Canada, dial 1 (866) 288-4268.

Avoid placing the telephone base too close to:

Communication devices such as television sets, VCRs, or

other cordless telephones.

Excessive heat sources.

Noise sources such as a window with traffic outside, motors,

microwave ovens, refrigerators, or fluorescent lighting.

Excessive dust sources such as a workshop or garage.

Excessive moisture.

Extremely low temperature.

Mechanical vibration or shock such as on top of a washing

machine or work bench.

•

You must install and charge

the handset battery before

using the cordless handset.

See pages 6-7 for easy

instructions.

Installation

Getting started

2

CHARGE light

On when the handset is charging in the

telephone base or charger.

Softkeys (2)

Press to select a menu item displayed above

the key.

While in a menu, press to select an item or save

an entry or setting.

CELLULAR

Press to make or answer a cell call.

During a cell call, press to answer an incoming

call when you hear a call waiting alert.

Flashes quickly when there is an incoming

cell call.

Flashes slowly when a cell call is on hold.

HOME/FLASH

Press to make or answer a home call.

During a home call, press to answer an incoming

call when you hear a call waiting alert.

Flashes quickly when there is an incoming

home call.

Flashes slowly when a home call is on hold.

1

While reviewing a caller ID history entry, press

repeatedly to add or remove 1 in front of the

telephone number before dialing or saving it in

the directory.

TONE

Press to switch to tone dialing temporarily

during a call if you have pulse service.

Press to toggle the name order when saving a

caller ID log entry into a directory.

/SPEAKER

Press to make or answer a home call using the

speakerphone.

Press to turn on the handset speakerphone.

Press again to resume normal handset use.

REDIAL/PAUSE

Press repeatedly to view the last 10

numbers dialed.

While entering numbers, press and hold

to insert a dialing pause.

Quick reference guide - handset

Getting started

3

DIR /VOLUME

Press to scroll up while in menus.

During a call or message playback, press to

increase the listening volume.

Press to show directory entries when the

telephone is not in use.

While entering names or numbers in the

directory, press to move the cursor to the left.

MUTE/DELETE

During a call, press to mute the microphone.

While predialing, press to delete digits.

While reviewing the redial list, directory or caller ID

history, press to delete an individual entry.

While entering or editing a directory entry, press

to erase a digit or character.

While the handset is ringing, press to silence the

ringer temporarily.

During message or announcement playback,

press to delete a message or announcement.

OFF/CANCEL

While using menus, press to cancel an operation,

back up to the previous menu, or exit the menu

display.

Press and hold to return to idle mode.

During a call, press to hang up.

Press and hold while the telephone is not in use

to erase the displayed messages (XX Missed

calls and Download fail).

While the handset is ringing, press to silence the

ringer temporarily.

CID /VOLUME

Press to scroll down while in menus.

During a call or message playback, press to

decrease the listening volume.

Press to show the caller ID history when the

telephone is not in use.

While entering names or numbers in the

directory, press to move the cursor to the right.

# (pound key)

Press repeatedly to display other dialing options

when reviewing a caller ID history entry.

EQ

During an outside call, intercom call, message

or announcement playback, press to change the

quality of the audio to best suit your hearing.

Quick reference guide - handset

Getting started

4

Quick reference guide - handset

Menu

Feature menu

Play messages

Answering sys

Directory

Caller ID log

Intercom

Bluetooth

Ringers

Set date/time

Settings

Website

Main menu

The selected menu item is highlighted.

PUSH TO TALK

Press to begin a one-to-one or one-to-group

broadcast.

Press and hold to begin a one-to-group broadcast

when the handset is not in use.

Using menus

Press MENU in idle mode (when the telephone is not in use)

to enter the main menu.

Use CID or DIR to scroll through menu items.

Press SELECT to select or save the highlighted item.

-OR-

Press OFF/CANCEL to cancel an operation, back up to the

previous menu, or exit the menu display.

1.

2.

3.

For complete instructions, refer to the user’s manual provided

with your TL92271/TL92321/TL92371/TL92421/TL92471/

TL96151/TL96271/TL96371/TL96451/TL96471 telephone

system. If you are unable to find your user’s manual, go to

www.telephones.att.com/manuals to read and/or

download the manual.

Getting started

5

IMPORTANT INFORMATION:

Use only the power adapter provided with this product. To obtain a

replacement, visit our website at www.telephones.att.com or

call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

The power adapter is intended to be correctly oriented in a vertical or floor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet outlet.

•

Charger installation

Plug the power adapter into an electrical

outlet not controlled by a wall switch.

Getting started

6

Battery installation and charging

Install the battery, as shown on page 7. Once you have installed

the battery, the screen indicates the battery status (see the

following table). If necessary, place the handset in the telephone

base or charger to charge the battery. For best performance,

keep the handset in the telephone base or charger when not in

use. The battery is fully charged after 16 hours of continuous

charging. See the table on page 36 for battery operating times.

If the screen shows Place in charger and flashes, you need to

charge the handset without interruption for at least 30 minutes

to give the handset enough charge to use the telephone for a

short time. The following table summarizes the battery charge

indicators and actions to take.

Battery indicators Battery status Action

The screen is blank

or shows Place

in charger and

flashes.

The battery has no or

very little charge. The

handset cannot be used.

Charge without interruption

(at least 30 minutes).

The screen shows

Low battery and

flashes.

Battery has enough

charge to be used for a

short time.

Charge without interruption

(at least 30 minutes).

The screen shows

HANDSET X.

Battery is charged. To keep the battery

charged, place it in the

telephone base or charger

when not in use.

NOTE: If you are on a phone call in low battery mode, you hear four short

beeps every minute.

Getting started

7

Battery installation and charging

Install the battery, as shown below.

IMPORTANT INFORMATION:

Use only the supplied rechargeable battery or replacement battery (model

BT183342). To order, visit our website at www.telephones.att.com

or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

If you do not use the handset for a long time, disconnect and remove the

battery to prevent possible leakage.

•

After you install your telephone or power returns following a

power outage, the handset will prompt you to set the date and

time. For instructions, see Set date and time in the telephone

system user’s manual for details. To skip setting the date and

time, press OFF/CANCEL or BACK.

CHARGE light

Step 3

Charge the handset by placing it

face up in the telephone base or

charger. The CHARGE light is on

when charging.

Step 1

Plug the battery connector

securely into the socket

inside the handset battery

compartment, matching

the color-coded label.

Insert the supplied battery

with the label THIS SIDE

UP facing up, as indicated.

Step 2

Align the cover

flat against

the battery

compartment, then

slide it upwards

until it clicks into

place.

SET DATE

--/--/--

MM/DD/YY

BACK

SET

SET TIME

--:-- --

BACK

SET

Getting started

8

Adding and registering handsets

Before using a new TL90031/TL90041/TL90051/TL90061/

TL90071 handset, make sure it is registered to the telephone

base first. The telephone system can support up to 12 handsets.

For TL90031/TL90041/TL90051/TL90061, make sure it is registered

to TL96151/TL96451 telephone. For TL90071, make sure it is

registered to TL92271/TL92321/TL92371/TL92421/TL92471/

TL96271/TL96371/TL96471 telephone. The handsets provided

with your telephone system are already registered as

HANDSET 1, and so forth. Additional handsets registered to the

telephone system are assigned in the sequential order they are

registered (up to HANDSET 12).

You must register each handset separately. When first purchased,

all expansion handsets show Put handset on BASE to register.

Register a handset to your telephone base for

AT&T models TL92271/TL92321/TL92371/TL92421/TL92471

1. Make sure the handset is out of the telephone

base or charger and shows Put handset on BASE

to register before you begin registration.

2. Put the handset you wish to register on the

telephone base cradle, not the charger.

3. The handset displays Registering handset...

on the handset and the red IN USE light on

the telephone base turns on. It takes about 90

seconds to complete the registration process.

The handset displays HANDSET X Registered

(X represents the registered handset number).

The IN USE light turns off and the handset

beeps when registration completes.

If registration fails, the system will automatically try to register again.

If it fails after the third try, the handset shows Registration failed,

then Put handset on BASE to register. This may take up to five

minutes to occur. When the handset displays Put handset on BASE

to register, please start again from Step 1.

NOTE: You cannot register a handset if any other system handset is in use.

Registration and deregistration

9

Adding and registering handsets

Register a handset to your telephone base for

AT&T models TL96151/TL96271/TL96371/TL96451/TL96471

1. Make sure the handset is out of the telephone

base or charger and shows Put handset on

BASE to register before you begin registration.

2. Put the handset you wish to register on the

telephone base cradle, not the charger.

3.

The handset displays Registering handset...,

and the telephone base screen displays

Registering... Please wait. It takes about 90

seconds to complete the registration process.

The handset displays HANDSET X Registered

(X represents the registered handset number),

and beeps when registration completes.

If registration fails, the system will

automatically try to register again. If it fails

after the third try, the handset displays

Registration failed, then Put handset on

BASE to register. The telephone base screen

displays Registration failed and then returns

to the idle screen. This may take up to five

minutes to occur. When the handset displays

Put handset on BASE to register, please start

again from Step 1.

NOTES:

You cannot register a handset if any other system

handset is in use.

Registration slots are full shows on the base

screen while you are doing Step 3.

•

Put Handset

on BASE

to register

Registering

handset...

Registering...

Please wait

HANDSET X

registered

HANDSET X

registered

Registration and deregistration

10

Deregistering handsets

You may need to deregister your handsets if:

You have 12 registered handsets and need

to replace a handset.

-OR-

You wish to change the designated handset

number of your registered handsets.

You must first deregister ALL handsets, and

then register each handset you wish to use again, one at a time.

Please read carefully through all the instructions on this

page before beginning the deregistration process.

Deregister all handsets from the telephone base for

AT&T models TL92271/TL92321/TL92371/TL92421/TL92471

Make sure that all handsets are out of the telephone base and

chargers before you begin deregistration.

Press and hold /HANDSET LOCATOR on the telephone

base for about 10 seconds until the IN USE light flashes, then

release /HANDSET LOCATOR.

Quickly press /HANDSET LOCATOR again. You must press

/HANDSET LOCATOR while the IN USE light is still flashing.

The IN USE light flashes for about seven seconds. If the light

stops flashing, start again with Step 1.

All system handsets show Put handset on BASE to register

and you hear a confirmation tone when the deregistration

completes. The deregistration process takes about 10 seconds

to complete.

After deregistering, register each handset again individually.

See Adding and registering handsets on page 8.

NOTES:

If the deregistration process fails, you may need to reset the system and

try again. To reset, unplug the power from the telephone base and plug

it back in.

You cannot deregister the handsets if any other system handset is in use.

Even if the battery is depleted, you can still deregister the handsets by

following the steps mentioned above.

•

1.

2.

3.

4.

5.

•

Registration and deregistration

11

Deregistering handsets

Deregistering all handsets from the telephone base for

AT&T models TL96151/TL96271/TL96371/TL96451/TL96471

Make sure that all handsets are out of the telephone base and

chargers before you begin deregistration.

Press and hold /HANDSET LOCATOR on the

telephone base for about 10 seconds until the

base screen shows Deregister all devices?,

then release /HANDSET LOCATOR.

Quickly press /HANDSET LOCATOR again,

or press YES . You must press /HANDSET LOCATOR or YES

within 5 seconds. If the telephone base returns to the idle

screen, start again with Step 1.

The telephone base shows Please wait... and then returns to

the idle screen. All system handsets show Put handset on

BASE to register and you hear a confirmation tone when the

deregistration completes. The deregistration process takes

about 10 seconds to complete.

After deregistering, register each handset again individually.

See Adding and registering handsets on page 9.

NOTES:

If the deregistration process fails, you may need to reset the system and

try again. To reset, unplug the power from the telephone base and plug

it back in.

You cannot deregister the handsets if any other system handset is in use.

Even if the battery is depleted, you can still deregister the handsets by

following the steps mentioned above.

1.

2.

3.

4.

5.

•

Deregister

all devices?

NO YES

12

Troubleshooting

If you have difficulty with your telephone, please try the

following suggestions. For Customer Service, or to purchase

accessories or replacement parts, visit our website at

www.telephones.att.com, or call 1 (800) 222-3111. In

Canada, dial 1 (866) 288-4268.

The handset registration is unsuccessful.

Follow the handset registration instructions to register the

handset again (see Adding and registering handsets on

pages 8-9).

My telephone doesn’t work at all.

Make sure the power cord is securely plugged in.

Make sure you plug the battery connector securely into the

cordless handset.

Make sure you plug the telephone line cord securely and

firmly into the telephone base and the telephone wall jack.

Charge the battery in the cordless handset for at least 16

hours. For optimum daily performance, return the cordless

handset to the charger when not in use.

If the battery is depleted, charge the handset for at least 30

minutes before you use it. See page 6 for details.

Reset the telephone base. Unplug the electrical power. Wait

for approximately 15 seconds, then plug it back in. Allow up

to one minute for the cordless handset and telephone base

to reset.

You may need to purchase a new battery. Refer to Battery

installation and charging in this user’s manual on pages 6-7.

•

Appendix

13

Troubleshooting

The display shows No home line. I cannot get a dial tone.

Try all the suggestions, as mentioned above.

If the previous suggestions do not work, disconnect the

telephone line cord from your telephone and connect the

telephone line cord to another telephone.

If there is no dial tone on that other telephone either,

your telephone line cord may be defective. Install a new

telephone line cord.

If changing the telephone line cord does not help, the wall

jack (or the wiring to this wall jack) may be defective. Try

using a different wall jack in your home to connect your

TL92271/TL92321/TL92371/TL92421/TL92471/TL96151/

TL96271/TL96371/TL96451/TL96471 telephone, or contact

your telephone service provider (charges may apply).

I cannot dial out.

Try all the suggestions, as mentioned above.

Make sure you have a dial tone before dialing. The cordless

handset may take a second or two to find the telephone base

and produce a dial tone. This is normal. Wait an extra second

before dialing.

Eliminate any background noise. Noise from a television, radio

or other appliances may cause the phone to not dial out

properly. If you cannot eliminate the background noise, try

muting the cordless handset before dialing, or dialing from

another room with less background noise.

If other phones in your home are having the same problem,

contact your telephone service provider (charges may apply).

•

Appendix

14

Troubleshooting

My cordless handset isn’t performing normally.

Make sure you plug the power cord securely into the

telephone base. Plug the power adapter into a different,

working electrical outlet without a wall switch.

Move the cordless handset closer to the telephone base. You

may have moved out of range.

Reset the telephone base. Unplug the electrical power. Wait

for 15 seconds, then plug it back in. Allow up to one minute

for the cordless handset and telephone base to reset.

Other electronic products such as HAM radios and other DECT

phones, can cause interference with your cordless phone. Try

installing your phone as far away as possible from these types

of electronic devices.

Out of range OR No power at base appears on my cordless

handset.

Ensure you plug the telephone base in properly and the

power is on.

Place the cordless handset in the telephone base for one

minute to allow the cordless handset and base to synchronize.

Move the cordless handset closer to the telephone base. You

may have moved out of range.

Reset the telephone base. Unplug the electrical power. Wait

for 15 seconds, then plug it back in. Allow up to one minute

for the cordless handset and telephone base to reset.

Other electronic products such as HAM radios and other DECT

phones, can cause interference with your cordless phone. Try

installing your phone as far away as possible from these types

of electronic devices.

•

Appendix

15

Troubleshooting

The batteries do not hold a charge.

If the cordless handset is in the telephone base or charger

and the charge light is not on, refer to The charge light is off

(page 20).

Charge the battery in the cordless handset for at least 10

hours. For optimum daily performance, return the cordless

handset to the telephone base or charger when not in use.

If the battery is depleted, it may take approximately 30

minutes to charge the handset before it shows Low battery.

Refer to the table on page 6 for details.

You may need to purchase a new battery. Refer to Battery

installation and charging in this user’s manual on pages 6-7.

I hear other calls while using my phone.

Disconnect the telephone base from the telephone jack, and

plug in a different telephone. If you still hear other calls, call

your telephone service provider.

I get noise, static, or weak signals even when I’m near the

telephone base.

If you subscribe to high-speed Internet service (DSL - digital

subscriber line) through your telephone line, you must

install a DSL filter between the telephone line cord and the

telephone wall jack. The filter prevents noise and caller ID

problems as a result of DSL interference. Please contact your

DSL service provider for more information about DSL filters.

You may be able to improve the performance of your cordless

phone by installing your telephone base as far as possible

from any other existing cordless telephone system that may

already be installed.

Other electronic products such as HAM radios and other DECT

phones, can cause interference with your cordless phone. Try

installing your phone as far away as possible from these types

of electronic devices.

•

Appendix

16

Do not install this phone near a microwave oven or on

the same electrical outlet. You may experience decreased

performance while the microwave oven is operating.

If you plug your phone in with a modem or a surge protector,

plug the phone (or modem/surge protector) into a different

location. If this does not solve the problem, relocate your

phone or modem farther apart from one another, or use a

different surge protector.

Move your phone to a higher location. The phone may have

better reception in a high area.

If other phones in your home are having the same problem,

contact your telephone service provider (charges may apply).

I experience poor sound quality when using the

speakerphone.

For increased sound quality while using the speakerphone,

place the handset on a flat surface with the dialing keys

facing up.

When using a speakerphone, controlling background noise

in your environment is essential. While you are listening

to your party, press MUTE/DELETE to temporarily turn your

microphone off. When it is your turn to speak, remember to

press MUTE/DELETE again to turn the microphone on.

Excessive background noise will cause a speakerphone to fade

in and out. Try controlling the background noise by turning off

any audio devices near the speakerphone. Also, try to avoid

interrupting the person at the other end of the conversation

while they are speaking. If background noise cannot be

controlled, you should terminate speakerphone operation and

return to normal handset mode.

•

Troubleshooting

La page est en cours de chargement...

AT&T TL90071 Manuel utilisateur

AT&T TL90071 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents