Eneo MSR-24N080004A Quick Installation Manual

EN

Quick Installation Guide

Multisignal HD Video Record-

er, HD-TVI, AHD, 960H, 2xSATA,

HDMI

MSR-24N040004A

MSR-24N080004A

DE

FR

IT

2

Contents

Components...................................................................................................................5

Description ....................................................................................................................6

Front.......................................................................................................................................................................................6

Rear .......................................................................................................................................................................................6

Installation .....................................................................................................................8

Installation ...........................................................................................................................................................................8

Installing HDDs .................................................................................................................................................................8

Starting System .................................................................................................................................................................9

Quick Setup ..................................................................................................................................................................... 10

Account ........................................................................................................................................................................10

System .........................................................................................................................................................................10

Network ........................................................................................................................................................................11

Time/Date ...................................................................................................................................................................12

Record ........................................................................................................................................................................... 13

Live Screen Conguration ......................................................................................... 14

Icons in Live screen ....................................................................................................................................................... 14

Live Launcher menu ....................................................................................................................................................16

Quick menu ......................................................................................................................................................................17

Setup menu ................................................................................................................ 18

Further information .................................................................................................. 19

3

EN

Safety instructions

General safety instructions

• Before switching on and operating the system, rst read this safety advice and the operating instructions.

• Keep the operating instructions in a safe place for later use.

• Installation, commissioning and maintenance of the system may only be carried out by authorised

individuals and in accordance with the installation instructions - ensuring that all applicable standards and

guidelines are followed.

• Protect the devices from water penetration and humidity, since these can cause lasting damage.

• Should moisture nevertheless enter the system, under no circumstance switch on the devices under these

conditions, instead send them for examination to an authorised specialist workshop.

• The system must never be used outside of the technical specications, since this can destroy it.

• The device must be protected from excesses of heat, dust, humidity and vibration.

• When separating the system from the voltage supply, only ever use the plug to pull out the cable. Never

pull directly on the cable itself.

• Lay the connecting cables carefully and check that they are not mechanically stressed, kinked or damaged

and that no humidity can penetrate into them.

• In the event of a malfunction, please inform your supplier.

• Maintenance and repairs may only be carried out by authorised specialist personnel.

• The system must be isolated from the power supply before opening the housing.

• The device may only be opened by qualied service personnel. Unauthorised access invalidates any

warranty claim.

• Connection cables should always be exchanged through Videor E. Hartig GmbH.

• Use only original spare parts and accessories from Videor E. Hartig GmbH.

• The housing should only be cleaned using a mild domestic cleaning agent. Never use solvents or petrol as

these can permanently damage the surface.

• During installation, it is essential to ensure that the seals provided are correctly installed and that they are

not displaced during installation. Damaged seals must not be installed and will invalidate any warranty.

• The installer is responsible for the maintenance of the enclosure as per the technical data, e.g. by sealing

the cable outlets with silicone.

• Wire end ferrules should be used when shortening the exible connection cables.

• The devices may only be operated in the temperature range indicated in the data sheet and within the

dened air humidity range.

Product - Specic Safety Instructions

• The camera may never be pointed directly at the Sun with the aperture open (this will destroy the sensor).

• It is unavoidable that during manufacture and to a certain extent during later use, humidity will be present

in the ambient air within the device’s housing. In the event of large temperature uctuations, this humidity

may condense inside the housing.

• To avoid this condensation inside the very tightly sealed housing, the manufacturer has inserted silica gel

sachets in the housing of the various camera types.

• It is however a physical given, that these silica gel bags will reach saturation after a certain amount of time.

They should therefore be replaced with new silica gel sachets.

• During installation, it is essential to ensure that the seals provided are correctly installed and that they are

not displaced during installation. Damaged seals must not be installed and will invalidate any warranty.

• A multipolar, easily accessible isolation device should be installed in the proximity of the IR Spotlight, in

order to disconnect the device from the power supply for service work.

• The earth connection must be made according to the low impedance requirement of DIN VDE 0100.

• Subsequent painting of the equipment surface can impair the function.

• Any warranty claim is invalidated by subsequent painting.

• A safety margin of > 1m from the spotlight must be maintained when viewing directly into the IR Spotlight

in a darkened environment.

• Do not look directly at invisible LED radiation using optical instruments (e.g. a reading glass, magnifying

glass or microscope), since this can endanger the eyes, LED Class 1M.

• Operation of the IR spotlight with a defective cover or during repair is prohibited.

4

Class A device note

This is a Class A device. This device can cause malfunctions in the living area; in such an event, the operator may

need to take appropriate measures to compensate for these.

WEEE (Waste Electronical & Electronic Equipment)

Correct Disposal of This Product (Applicable in the European Union and other European countries with separate

collection systems).

This marking shown on the product or its literature, indicates that it should not be disposed with

other household wastes at the end of its working life. To prevent possible harm to the environment

or human health from uncontrolled waste disposal, please separate this from other types of wastes

and recycle it responsibly to promote the sustainable reuse of material resources. Household users

should contact either the retailer where they purchased this product, or their local government

oce, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase

contract. This product should not be mixed with other commercial wastes for disposal.

Graphical symbols

Please pay attention to the safety instructions, and carefully read through this instruction guide before initial

operation.

Important points of warning are marked with a caution symbol.

i

Important points of advice are marked with a notice symbol.

5

EN

Components

This system comes with the following components;

• DVR

• Installation Guide

• CD

• DC adapter & power cord

• Mouse

• SATA cable

• SATA power cable

• HDD xing screw

6

Description

Front

No. Name Function

1 Power status LED Pointing out device on/o.

2 Recording status LED Pointing out recording in process.

3 Network LED With a network viewer, pointing out network in connection.

4 USB port USB port is connected for USB mouse or rmware upgrade, and data back-up.

Rear

4 channel model:

7

EN

8 channel model:

No. Name Function

1 Audio In Camera audio input port.

2 Video In Camera video input port.

3 CVBS CVBS output port.

4 VGA VGA output port.

5 HDMI HDMI output port.

6 LAN Network connector.

7 Alarm In/Out Alarm connector.

8 RS485 RS-485 communication connector.

9 DC12V Power supply connector.

10 Audio Out Audio output port.

11 Power Switch Power On-o

8

Installation

This chapter describes the way to install DVR.

When installing a device, connect rear of the device with each port on the basis of below

connection map.

The device starts rst like below sequences:

1. Installing HDD

2. Connecting with an exterior device

3. Starting a system

4. Setting an quick setup

Installing HDDs

How to install HDDs in the device:

CAUTION:

• Withdraw the mains plug before installing HDD to reduce

the risk of injury or electrical shock, or device malfunction.

• Make sure to check the compatibility of HDD with the

device.

1. Always switch o and unplug the unit.

2. Unscrew with a screw driver (+) and open the unit cover.

9

EN

3. Install HDD in the bottom case.

4. Connect a data cable and power cable with HDD.

5. Close the cover and tighten screws.

Starting System

Power supply begins with system operation as follows:

1. Switching on initialize with below icons in order.

i

Notice: Installing new HDD might take more initialize time.

2. With buzzer sounds, the start screen is presented.

3. In Log in screen, enter the ID, Password and press OK.

i

Notice: Default ID & Password is admin/admin

CAUTION:

Please change password after login due to security.

For security reasons, please note in the event the password is

lost the device must be returned to our Service Centre so the

password can be reset.

10

Quick Setup

Account

Set ID and Password.

i

Notice: Default ID & Password is admin/admin. Change password for security.

System

Set each item in System setting screen.

• System Mode: Select input video type (analog or analog+IP).

11

EN

• Language: Select system language.

• Device Name: Enter the device name.

• Keyboard ID: To identify device usages in controlling DVR with RS485 through a

keyboard. Selecting the device ID. In case of simultaneous use of equipment, set ID

with dierence.

• HDMI / VGA: Set resolution of a monitor connected to the device.

Network

Set each item in Network setting screen.

• WAN Port: Select whether to use static IP or dynamic IP.

• IP Address, Subnet Mask, Gateway, DNS, and Port: As for dynamic IP, enter informa-

tion in each space.

12

Time/Date

Set each item in Time/Date setting screen.

• Network Time Sync: Select network for synchronizing with time server.

• System Time: Not for synchronizing with network time server, set the device time;

otherwise (applying for Daylight saving time), select DST.

• Time Zone: Select time zone for the system being installed.

• DST Start/End: For applying Daylight saving time, set the application period.

13

EN

Record

Set each item in Record setting screen.

• Select desired recording period and daily recording hours.

• HDD size will be displayed automatically.

• Select priority of frame rate or resolution.

• Select recording modes as continouse or event.

• Select if audio record or not.

• Click Calculation to see recommended frame rate and resolution.

14

Live Screen Conguration

UI screen is congured like below gure.

No. Item Description

1 Setup menu Setting menu is located in the corner of upper screen.

2 Live screen Show live video of connected cameras.

3 Launcher menu Launcher menu is located in the corner of below screen.

4 Quick menu Clicking the right button of a mouse displays Quick menu.

5 Add to CH Move mouse cursor on the center of window to register IP camera manually.

i

Notice: IP Camera menu will be appeared when Analog+IP cam mode is selected.

Icons in Live screen

Each icon in the live screen displays a present setting status or a function. UI screen con-

sists of like below.

i

Notice: Chosen live screen is marked as a blue frame; mouse-located live screen is

marked as yellow one.

15

EN

No. Icon Description

1 CH1 CAM1 Channel numbers and camera titles.

2

A camera with PTZ function.

PTZ control function in process.

Recording in alarm event mode.

Recording in motion event mode.

Recording in panic recording mode.

Recording in consecutive recording mode.

3

Video loss icon.

4

Mic on/o.

Speaker on/o.

5

Displaying present time and date.

16

Live Launcher menu

This chapter describes Launcher menu in the bottom of the screen.

No. Item Description

1

Log in/out status and logged in ID.

2 Date & Time Displaying present date and time.

3 HDD Displaying HDD capacity in use.

4

Moving to previous/next partition screen.

5

Displaying live screen in order set (toggle).

6

Selecting partition mode to mark in live screen (single screen, 4- and 9-partition).

7

Stopping or replaying selected live screen images (toggle).

8

Audio on or mute chosen live screen (toggle).

9 Save the bookmark.

10

Make a backup video of users want.

11

Searching recording data (time, event, thumbnail, smart search and text).

12

Playback recorded data.

13

Starting immediate recording of selected channel.

14

Locking or releasing launcher menu (toggle).

17

EN

Quick menu

This chapter depicts Quick menu when users click the right button of the mouse in live

screen.

No. Item Description

1 Screen Mode Selecting the partition mode of live screen (Full, 2X2 and 3X3).

2 Zoom in Magnifying selected live screen (Zoom out, 2 times, 4 times, and 8 times).

3 Freeze Freezes the video selected live screen images (toggle on / o).

4 Speaker Output/Mute Turning on/o a sound speaker.

5 PTZ Control Controlling PTZ functions.

6 Stop Alarm Stopping monitoring alarm output and event.

7 Spot Mode Set the output mode of a spot monitor (Auto, Full, and 3x3).

8 Playback

Playing selected live screen images (before 30 sec, 1 min, 5 min, 10 min, 30 min, 1-hour, Go to last

play time, and Go to last record time).

9 Search Searching recording data (time, event, thumbnail, smart search and text).

10 Backup Backup video users want.

11 Setup Opens the DVRs main set up menu.

12 Camera Registration Opens a pop-up menu for IP camera registration.

13 Status

Opens a pop-up menu showing: device system log, event, and recording status (system log, event,

and record).

14 Log in/Log out Log in/Log out

15 Shutdown Shuts down or restarts the device (shutdown, restart).

18

Setup menu

This chapter describes Setup menu in the upper side of the screen.

i

Notice: Setup screen is available to click Setup in Quick menu by clicking the right

button of the mouse.

No. Item Description

1 SYSTEM Setting the system environment.

2 CAMERA Setting the camera.

3 DEVICE Setting the non-camera device connected with the DVR.

4 RECORD Setting the recording parameters.

5 EVENT Setting each event.

6 NETWORK Setting the network environment.

i

Notice: For more details on each section within the Setup menu, please refer to the

main manual contained on the CD supplied with the DVR.

19

EN

Further information

i

Notice: Please download the latest version of our new Management Software

eneo Center from the eneo website: www.eneo-security.com.

Make sure to always upgrade to the latest rmware version available from the eneo web-

site at www.eneo-security.com to receive the latest functionality for your product.

The manual, and other software tools are available on the eneo website at

www.eneo-security.com or on the included CD.

Information on compatible video management software solutions can be found in the

category Videomanagement at www.eneo-security.com.

Open Source Software

The software included in this product contains copyrighted software that is licensed

under open source licenses.

You may obtain the complete corresponding source code from eneo for a period of three

years after the last shipment of this product by sending email to:

opensource@eneo-security.com.

If you want to obtain the complete corresponding source code with a physical medium

such as CD-ROM, the cost of physically performing source distribution might be charged.

For more details about Open Source Software, refer to the eneo website at

www.eneo-security.com or an included product CD.

20

Inhaltsverzeichnis

Komponenten ..............................................................................................................23

Beschreibung ..............................................................................................................24

Vorderseite ........................................................................................................................................................................ 24

Rückseite .......................................................................................................................................................................... 24

Installation ...................................................................................................................26

Installation ........................................................................................................................................................................ 26

Einrichtung der Festplatten ....................................................................................................................................... 26

Systemstart ...................................................................................................................................................................... 27

Schnellkonguration ................................................................................................................................................... 28

Konto ............................................................................................................................................................................ 28

System ......................................................................................................................................................................... 28

Netzwerk ..................................................................................................................................................................... 29

Zeit / Datum ............................................................................................................................................................... 30

Aufzeichnung ............................................................................................................................................................. 31

Konguration der Live-Ansicht .................................................................................32

Symbole in der Live-Ansicht ...................................................................................................................................... 32

Live-Startprogrammmenü ......................................................................................................................................... 34

Schnellmenü ................................................................................................................................................................... 35

Kongurationsmenü ..................................................................................................36

Weitere Informationen ...............................................................................................37

La page charge ...

Eneo MSR-24N080004A Quick Installation Manual

Ce manuel convient également à

Eneo MSR-24N080004A Quick Installation Manual

dans d''autres langues

Documents connexes

Autres documents