Fulgor Milano F4GK24S1 Manuel utilisateur

F4GK24*1

F4GK30*1

F4GK36*1

F4GK42*1

EN USE & CARE MANUAL

FR GUIDE D’UTILISATION ET D’ENTRETIEN

ES MANUAL DE USO & MANTENIMIENTO

GAS COOKTOP

PLAQUE DE CUISSON GAZ

PLACA DE COCCIÓN DE GAS

Dear Customer,

Thank you for purchasing a Fulgor Milano product. Fulgor Milano is

committed to excellence and our signature technologies provide you with

professional tools for your kitchen. One of our central philosophies is

continuous investment in research that is rooted in developing life enhancing

technology. Our goal is to deliver products that are worthy of your family

recipes and that will breathe life into your kitchen, the heart of your home.

We invite you to enjoy your new Fulgor Milano product with same amount

of care and attention that we have put into creating it.

Your Life | Our Passion

EN

1

TABLE OF CONTENTS PAGE

1 - Safety Instructions 2

Cooktop Safety 2

Personal Safety 2

Warnings for Gas and Electric Installation 3

2 - Models and Part Identiﬁcation 4

3 - Gas Cooktop Operation 5

Gas Control Knob Setting 5

4 - Cookware 8

Cookware Characteristics 8

Match Pan Diameter to Flame Size 8

5 - Cleaning the Cooktop 10

Cooktop Part / Material Suggested Cleaners 10

6 - Troubleshooting 12

7 - Assistance or Service 13

Service Data Record 13

Pay attention to these symbols present in this manual:

WARNING

• This is the safety alert symbol. This symbol alerts you to

potential hazards that can kill or hurt you and others.

• You can be killed or seriously injured if you don’t follow

these instructions.

READ AND SAVE THESE INSTRUCTIONS.

WARNING

If the information in this manual is not

followed exactly, a ﬁre or explosion

may result causing property damage,

personal injury or death.

- Do not store or use gasoline or other

ﬂammable vapors and liquids in the

vicinity of this or any other appliance.

- WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch.

• Do not use any phone in your building.

• Immediately call your gas supplier

from a neighbor’s phone. Follow the

gas supplier’s instructions.

• If you cannot reach your gas supplier,

call the ﬁre department.

- Installation and service must be

performed by a qualiﬁed installer,

service agency or the gas supplier.

EN

2

1 - Safety Instructions

IMPORTANT

Please read all instructions before using this appliance.

Cooktop Safety

WARNING

To reduce the risk of ﬁre, electric shock, or injury to

persons, take these precautions:

• This appliance is intended for normal family household

use only. See the Warranty, if you have any questions,

contact the manufacturer.

• Have the cooktop installed and grounded by a qualiﬁed

technician. Have the installer show you where the gas

shut-off valve is located.

• Do not repair or replace any part of the appliance

unless speciﬁcally recommended in this manual.

All other servicing should be referred to a qualiﬁed

technician.

• For proper lighting and performance of the burners,

keep the igniters clean and dry.

• In the event that a burner goes out and gas escapes,

open a window or a door. Wait at least 5 minutes

before using the cooktop.

• Do not obstruct the ﬂow of combustion and ventilation

air.

• Do not use aluminium foil to line any part of the cooktop.

• If the cooktop is near a window, be certain that curtains

or any other window covering do not blow over or

near the burners; they could catch on ﬁre.

Personal Safety

WARNING

To reduce the risk of injury to persons, in the event of a

grease ﬁre, observe the following:

• In the event of a grease ﬁre SMOTHER FLAMES with a

close-ﬁtting lid, cookie sheet, or other metal tray, then

turn off the gas burner.

• BE CAREFUL TO PREVENT BURNS. If the ﬂames do not

go out immediately, EVACUATE AND CALL THE FIRE

DEPARTMENT.

• Do not use water, including wet dishcloths or towels

on grease ﬁres. A violent steam explosion may result.

• NEVER PICK UP A FLAMING PAN. You may be burned.

• ALWAYS have a working SMOKE DETECTOR near the

kitchen.

• LEAVE THE HOOD VENTILATOR ON when ﬂambéing

food.

To reduce the risk of burn injuries during cooktop use,

observe the following:

CAUTION

NEVER use this appliance as a space

heater to heat or warm the room. Doing

so may result in carbon monoxide

poisoning and overheating of the oven.

• Children or pets should not be left alone or unattended

in an area where appliances are in use.

• They should never be allowed to sit or stand on any part

of the appliance.

CAUTION

DO not store items of interest to children above or at the

back of the cooktop.

• Do not store ﬂammable materials on or near the cooktop.

• When using the cooktop: DO NOT TOUCH THE BURNER

GRATES OR THE IMMEDIATE SURROUNDING AREA.

• Use only dry potholders; moist or damp potholders on

hot surfaces may cause burns from steam.

EN

3

• Never leave the cooktop unattended when in use.

Boilovers cause smoking, and greasy spillovers may

ignite. A spill on a burner can smother all or part of the

ﬂame or hinder spark ignition. If a boilover occurs, turn

off burner and check operation. If burner is operating

normally, turn it back on.

• During cooking, set the burner control so that the ﬂame

heats only the bottom of the pan and does not extend

beyond the bottom of the pan.

• Take care that drafts like those from fans or forced air

vents do not blow ﬂammable material toward the ﬂames

or push the ﬂames so that they extend beyond the edges

of the pan.

• Always position handles of utensils inward so they do not

extend over adjacent work areas, burners, or the edge

of the cooktop.

• Wear proper apparel. Loose ﬁtting garments or hanging

sleeves should never be worn while cooking.

• In the event that personal clothing catches ﬁre, DROP

AND ROLL IMMEDIATELY to extinguish ﬂames.

• Never let clothing, potholders, or other ﬂammable

materials come in contact with hot burners or hot burner

grates.

• Use only certain types of glass, heatproof glass ceramic,

ceramic, earthenware, or other glazed utensils that are

suitable for cooktop use.

• Do not clean the cooktop while it is still hot. Some cleaners

produce noxious fumes when applied to a hot surface.

CAUTION

DO not allow aluminium foil, plastic, paper or cloth to

come in contact with hot burners or grates. Do not allow

pans to boil dry.

WARNING

The California Safe Drinking Water and Toxic Enforcement

Act requires the Governor of California to publish a list

of substances known to the State of California to cause

cancer, birth defects, or other reproductive harm, and

requires businesses to warn of potential exposure to such

substances.

This product contains a chemical known to the State

of California to cause cancer, birth defects, or other

reproductive harm.

This appliance can cause low-level exposure to some of

the substances listed, including benzene, formaldehyde,

carbon monoxide, toluene, and soot.

Warnings for Gas and Electric Installation

In case of Propane gas installation

The cooktop is ready for use with natural gas. It may be

converted for use with propane gas using the propane

conversion kit supplied with the cooktop.

Be sure the unit being installed is correct for the type of gas

being used.

Refer to the rating plate located on the underside burner box

(see installation instruction).

WARNING

Installation and service must be performed by a qualiﬁed

installer, service agency or the gas supplier.

CAUTION

• Always disconnect the electrical plug from the wall

receptacle before servicing this unit.

• For personal safety, this appliance must be properly

grounded.

• Do not under any circumstances cut or remove the third

(ground) prong from the power cord plug.

When connecting the unit to propane gas, make certain

the propane tank is equipped with its own high pressure

regulator.

In addition, the pressure regulator supplied with the

cooktop must be on the inlet gas pipe of this unit.

In case of electrical failure

If for any reason a gas control knob is turned ON and there

is no electric power to operate the electronic igniter of the

cook top, turn OFF all gas control knobs and wait 5 minutes

for the gas to dissipate before lighting the burner manually.

To light the burner manually, carefully hold a lighted match

to the burner ports and push and turn the gas control knob

to HI until it lights and then turn the knob to desired setting.

EN

4

2 - Models and Part Identiﬁcation

24” 30”

3

2

1 4

3 2

1

4

A

3 4

1

2

5

3 2

1

4 5

A

1. DOUBLE CROWNS (700 to 18000 Btu/h burner &

control knob)

2. SR (1,300 to 6,300 Btu/h burner & control knob)

3. R (2,200 to 12,000 Btu/h burner & control knob)

4. AUX (1,000 to 4,000 Btu/h burner & control knob)

1. DOUBLE CROWNS (700 to 18000 Btu/h burner &

control knob)

2. AUX (1,000 to 4,000 Btu/h burner & control knob)

3. R (2,200 to 12,000 Btu/h burner & control knob)

4. SR (1,300 to 9,000 Btu/h burner & control knob)

5. SR (1,300 to 6,300 Btu/h burner & control knob)

36” 42”

5

4

1

2

3

3 2

1

4 5

A

1 4 3 2

1

2 3 4

A

1. SR (1,300 to 6,300 Btu/h burner & control knob)

2. SR (1,300 to 9,000 Btu/h burner & control knob)

3. DOUBLE CROWNS (700 to 18000 Btu/h burner &

control knob)

4. R (2,200 to 12,000 Btu/h burner & control knob)

5. AUX (1,000 to 4,000 Btu/h burner & control knob)

1. DOUBLE CROWNS (700 to 18000 Btu/h burner &

control knob)

2. AUX (1,000 to 4,000 Btu/h burner & control knob)

3. SR (1,300 to 9,000 Btu/h burner & control knob)

4. R (2,700 to 15,000 Btu/h burner & control knob)

Appliance installed over 2,000 feet (610mt) De-rate effect

(De-rated 4% per 1000 feet)

A. Grates

B. Burner Cup

C. Burners Gas Spreader

B

C

EN

5

Gas Control Knob Setting

Electric gas ignition

The gas burner use an electric ignition device located near

each burner that by means a spark igniters ensure its surface

light automatically.

Models with standard ignition

The electric ignition automatically light the surface burners

when the control knobs are turned to LITE position.

To set:

1. Push and turn knob counter clockwise to “LIGHT”, all four

or ﬁve spark plugs will generate a clicking sound (spark),

however only the burner with the control knob turned to

LIGHT will produce a ﬂa me.

2. Turn knob anywhere between Hi and LO (in this position

the sparking will stop). In case ﬂame goes out repeat the

step 1.

Models with automatic re-ignition

The electronic auto re-ignition, lights the surface burners

when the control knob are turned at any valve rotation that

admits sufﬁcient gas ﬂow to support a ﬂame.

If any burner ﬂame goes out due to a draft or other adversity,

the igniter automatically sparks on all burners to relight the

ﬂame.

NOTE: this feature is provided as a convenience and is not

intended as a safety feature.

To set:

• Push and turn knob counter clockwise everywhere, all

four or ﬁve spark plugs will generate a clicking sound

(spark), however only the burner with the control knob

turned from HI _ LO wi ll produ ce a ﬂame and reignite

automatically if the ﬂame go es out.

WARNING

• Do not operate a burner using empty cookware or

without cookware on the grate.

• Do not touch the burner when the igniters are clicking

(sparking).

• Do not let the burner ﬂame extend beyond the edge of

the pan.

• Turn off all controls when not cooking.

Failure to follow these instruction can result in personal

injury or ﬁre.

Gas burners

The gas burners design of these cooktop models, allow

a pleasing option for cooking where size, power and

simmering are a primary concern.

Burners with one ring ﬂame

These gas burner line is engineered to match a wide size

and power capacity. The use of this burner is very simple;

just push and turn the knob counter clockwise and set to the

desired position from Hi to LO heat level (see chart guide

when setting heat level). Its ignition device can be standard

or with automatic re-ignition.

3 - Gas Cooktop Operation

EN

6

Burners with two rings ﬂame

This special burner has two separate ﬂame rings to provide

a real full heat regulation from high power to simmering.

To set :

1. Push and turn counter clockwise the knob between HI-LO

main ﬂame ,when the burner is turned on, the main ﬂame

and the Simmer ﬂame will always light and stay on.

2. Setting heat level main ﬂame from HI-LO power.

Simmer setting

Turn counter clockwise the knob on HI-LO simmering

position, the simmer ﬂame setting will use only the centre

ﬂame.

Turn off the burner

Turn the knob clock wise as far as it will go to the off

position.

EN

7

Burner Use Suggestions

Use the right front, right rear or left rear burners for

simmering, or for cooking smaller quantities of food

requiring small cookware. Use the left front POWER Burner

for bringing liquids to a rapid boil, cooking large quantities

of food, or for deep-fat frying requiring large cookware.

The Burner Flames

Turn each burner on. Flames should be blue in color with no

trace of yellow. The burner ﬂames should not ﬂutter or blow

away from the burner. The inner cone of the ﬂame should be

between 1/2” and 3/4” long.

Super Sealed Surface Burners

IMPORTANT

Do not obstruct the ﬂow of combustion and ventilation air

around the burner grate edges.

Burner cap and gas spreader

Always keep the burner cap and gas spreader in place

when using a surface burner. A clean burner cap and

spreader will help prevent poor ignition and uneven ﬂames.

Always clean the part after a spillover and routinely remove

and clean according to the “General Cleaning” section.

Burner base and injector

Gas must ﬂow freely throughout the injector oriﬁce to light

properly. Keep this area free of soil and do not allow spills,

food, cleaning agents or any other material to enter the

injector oriﬁce opening.

Protect it during cleaning.

-1/2” to 3/4”

COOKTOP BURNER

Be sure when lighting the burner:

• Gas spreader pin is properly aligned with burner base

slot.

• Cap pin is properly aligned with gas spreader slot.

Burner ports

Check burner ﬂames occasionally. A good ﬂame is blue in

color, not yellow.

Keep this area free of soil and do not allow spills, food,

cleaning agents or any other material to enter the burner

ports.

To Clean gas burner:

IMPORTANT

Before cleaning, make sure all controls are off and the

cooktop is cool.

1. Remove the burner cap from the burner base and clean

according to cleaning section.

2. Remove the burner spreader. Clean the gas tube opening

and burner port according to cleaning section.

3. Clean the burner base with a damp cloth (keep the gas

injector area free of cleaning agents and any other

material from entering the injector oriﬁce).

4. Replace the burner spreader and cap, making sure the

alignment pins are properly aligned with the slots.

5. Turn on the burner. If the burner does not light, check cap

and spreader alignment. If the burner still does not light,

do not service the gas burner yourself. Contact a trained

repair specialist.

EN

8

IMPORTANT

Never leave empty cookware on a hot surface cooking

area, element or surface burner.

Ideal cookware should have a ﬂat bottom, straight sides,

a well ﬁtting lid and the material should be of medium-to-

heavy thickness. Rough ﬁnishes may scratch the cooktop.

Aluminium and copper may be used as a core or base in

cookware. However, when used as a base it can leave

permanent marks on the cooktop or grates.

Cookware material is a factor in how quickly and evenly

heat is transferred, which affects cooking results. A

nonstick ﬁnish has the same characteristics as its base

material.

For example, aluminium cookware with a non-stick ﬁnish

will take on the properties of aluminium.

Use the following chart as a guide for cookware material

characteristics.

Cookware Characteristics

Aluminum: Heats quickly and evenly.

Suitable for all types of cooking. Medium or heavy thickness

is best for most cooking tasks.

Cast Iron: Heats slowly and evenly.

Good for browning and frying. Maintains heat for slow

cooking.

Ceramic or Ceramic glass: Follow manufacturer’s instructions.

Heats slowly, but unevenly. Ideal results on low to medium

heat settings.

Copper: Heats very quickly and evenly.

Earthenware: Follow manufacturer’s instructions.

Use on low heat settings.

Porcelain enamel on steel or cast Iron: See stainless steel or

cast iron.

Stainless steel: Heats quickly, but unevenly.

A core or base of aluminium or copper on stainless steel

provides even heating.

Match Pan Diameter to Flame Size

The ﬂame should be the same size as the bottom of the pan

or smaller. Do not use small pans with high ﬂame settings as

the ﬂames can lick up the sides of the pan. Oversize pans

that span two burners are placed front to rear, not side to

side.

Use Balanced Pans

Pans must sit level on the cooktop grate without rocking.

Center pan over burner.

Use a Lid That Fits Properly

A well-ﬁtting lid helps shorten the cooking time. Flat, heavy

bottom pans provide even heat and stability.

WARNING

BALANCED PAN

CONCAVE (HOLLOW)

CONVEX (ROUNDED)

FLAME TOO LARGE FOR

PAN SIZE

USE LIDS THAT FIT

PROPERLY

UNBALANCED PAN

4 - Cookware

EN

9

Use a simmering plate: For simmering stews and soups,

or melting chocolate, use the “FULGOR” simmer plate

accessory.

The simmer plate distributes the heat evenly and gently.

Canners and pressure cookers must meet the same

requirements as described above.

After bringing contents to a boil, use lowest heat setting

possible to maintain a boil or pressure (for pressure canners/

cookers).

EN

10

The entire Cooktop can be safey cleaned by wiping with

a soapy sponge, then rinsing and drying. If stubborn soil

remains, follow the recommended cleaning methods below.

CAUTION

• Before cleaning, be certain the burners are turned off and

the grates are cool.

• Always use the mildest cleaner that will do the job.

• Use clean, soft cloths, sponges or paper towels.

• Rub stainless steel ﬁnishes in the direction of the grain.

Wipe area dry to avoid water marks.

• Do not clean removable cooktop parts in any selfcleaning

oven.

• After cleaning, place all parts in their proper positions

before using cooktop.

The cleaners recommended below and on the following page

indicate cleaner types and do not constitute an endorsement of

a particular brand.

Use all products according to package directions.

5 - Cleaning the Cooktop

Cooktop Part / Material Suggested Cleaners

Parts and materials Suggested cleaners Suggestions/Reminders

Burner base

(Cast aluminium)

Damp cloth. Keep the gas injector area free of cleaning

agents and any other material from entering

the injector oriﬁce.

Gas spreader

(Cast aluminium)

• Detergent and hot water; rinse and dry.

• Stiff nylon bristle-toothbrush to clean port

openings.

Abrasive cleansers: Revere ware® metal

polish. Following package direction Use

Brillo® or S.O.S.® pads.

Rinse and dry.

Rub lightly, in a circular motion.

Aluminium cleaners may dull the surface.

To clean port opening, use a tooth brush

or straightened paper clip.

Burner cap and grate

(Porcelain enamel on cast

iron)

• Non abrasive cleaners: Hot water and

detergent, Fantastic, Formula 409. Rinse

and dry immediately.

• Mild abrasive cleaners: Bon Ami® and

Soft Scrub®.

• Abrasive cleaners for stubborn stains:

soap-ﬁlled steel wool pad.

• The grates are heavy; use care when

lifting. Place on a protected surface.

• Blisters/crazing/chips are common due

to the extreme temperatures on grate

ﬁngers and rapid temperature changes.

• Acidic and sugar-laden spills deteriorate

the enamel. Remove soil immediately.

• Abrasive cleaners, used too vigorously

or too often, can eventually mar the

enamel.

EN

11

Parts and materials Suggested cleaners Suggestions/Reminders

Exterior ﬁnish

(Porcelain enamel)

• Hot sudsy water: rinse and dry

thoroughly.

• Non abrasive cleansers: Ammonia,

Fantastic®, Formula 409®.

• Mild abrasive cleansers: Bon Ami®,

Ajax®, Comet®.

• Liquid cleaners: Kleen King®, Soft

Scrub®.

• Acidic and sugar-laden spills deteriorate

the porcelain enamel. Remove soil

immediately.

• Do not use wet sponge or towel on hot

porcelain.

• Always apply minimal pressure with

abrasive cleaners.3

Control knobs

(Plastic)

• Hot sudsy water: rinse and dry

immediately.

• If necessary, remove knobs (lift straight

up).

• Do not soak knobs.

• Do not use abrasive scrubbers or

cleansers.

• Do not force knobs onto valve shaft.

• Pull knobs straight away from control

panel to remove.

• When replacing knobs, make sure

knobs are in the OFF position.

• Do not remove seats under knobs.

Exterior ﬁnish

(Stainless Steel)

• Nonabrasive cleaners: Hot water and

detergent. Fantastic®, Formula 409®.

Rinse and dry immediately.

• Cleaner polish: Stainless Steel Magic®

to protect the ﬁnish from staining and

pitting; enhances appearance.

• Hard water spots: Household white

vinegar.

• Mild Abrasive Cleaners: Kleen King®

stainless steel liquid cleaner, Cameo®

aluminum & stainless steel cleaner, Bon

Ami®.

• Heat discoloration: Bar Keepers

Friend®.

• Stainless steel resists most food stains

and pit marks provided the surface is

kept clean and protected.

• Never allow food stains or salt to remain

on stainless steel for any length of time.

• Rub lightly in the direction of polish lines.

• Chlorine or chlorine compounds in some

cleaners are corrosive to stainless steel.

Check ingredients on label before using.

• Always apply minimal pressure with

abrasive cleaners especially on

graphics.

Igniters

(Ceramic)

• Carefully wipe with a cotton swab

dampened with water, ammonia or

Formula 409®.

• Gently scrape soil off with a toothpick.

• Avoid excess water on the igniter. A

damp igniter will prevent burner from

lighting.

• Remove any lint that may remain after

cleaning.

EN

12

Try the solutions suggested here ﬁrst in order to avoid the cost of an unnecessary service call.

Ignition will not operate

Is the power supply cord unplugged? Plug into a grounded 3 prong outlet.

Has a household fuse been blown or has the

circuit breaker been tripped?

Replace the fuse or reset the circuit.

Surface burners will not operate

Is this the ﬁrst time the surface burners have

been used?

Turn on any one of the surface burner knobs to release air from the gas

lines.

Is the control knob set correctly? Push in knob before turning to a setting.

Are the burner ports clogged? See “Super Sealed Surface Burners” section.

Surface burner ﬂames are uneven yellow and/or noisy

Are the burner ports clogged? See “Super Sealed Surface Burners” section.

Are the burner caps positioned properly? See “Super Sealed Surface Burners” section.

Is propane gas being used? The appliance may have been converted improperly. Contact a service

technician.

Surface burner makes popping noises

Is the burner wet? Let it dry.

Is the cap and gas spreader positioned

correctly?

Make sure the alignment pins are properly aligned see “Super Sealed

Surface Burners” section.

Excessive heat around cookware on cooktop

Is the cookware the proper size? Use cookware about the same size as the surface cooking area, element

or surface burner.

Cookware should not extend more than 1 in (2.5 cm) outside the cooking

area.

Cooktop cooking results not what expected

Is the proper cookware being used? See “Cookware” section.

Is the control knob set to the proper heat level? See “Setting the Control Knobs” section.

6 - Troubleshooting

EN

13

7 - Assistance or Service

Service Data Record

For authorized service or parts information see paragraph

“WARRANTY for Home Appliances”.

The location of the serial tag is below the cooktop box.

Now is a good time to write this information in the space

provided below. Keep your invoice for warranty validation.

Service Data Record

Model Number _________________________________

Serial Number __________________________________

Date of Installation or Occupancy __________________

Before calling for assistance or service, please check “Troubleshooting.” It may save you the cost of a service call.

If you still need help, follow the instructions below. When calling, please know the purchase date and the complete model and

serial number of your appliance. This information will help us to better respond to your request.

EN

14

FR

1

TABLE DES MATIERES PAGE

1 - Précaution de Sécurité 2

Sécurité de la Table de Cuisson 2

Securité Personnelle 2

Avertissements pour l’Installation de Gaz et

Electrique 3

2 - Modèles et Identiﬁcation des Pièces 4

3 - Fonctionnement de la Table de Cuisson 5

Utilisation des Boutons de Commande 5

4 - Batterie de Cuisine 8

Caractéristiques des Matériaux 8

Le Diamètre de la Casserole Doit

Correspondre au Diamètre de la Flamme 8

5 - Nettoyage de la Table de Cuisson 10

Table de Cuisson / Produits d’Entretien

Conseillés 10

6 - Solution aux Problèmes 12

7 - Assistance ou Service Après-Vente 13

Données de Service 13

Veuillez prêter attention à ces symboles que vous

rencontrerez dans ce manuel.

AVERTISSEMENT

• Ce symbole signiﬁe que la sécurité est en danger. Il

signale les risques potentiels qui peuvent entraîner la

mort ou des blessures à l’opérateur ou aux autres.

• Si vous ne suivez pas ces instructions à la lettre, vous

courez le risque de mourir ou d’être sérieusement

blessé.

BIEN LIRE CES INSTRUCTIONS ET LES

CONSERVER.

AVERTISSEMENT

Si les informations ﬁgurant dans ce

manuel ne sont pas suivies à la lettre,

il peut en résulter un incendie ou une

explosion pouvant causer des dégâts

matériels, des blessures, voire mort

d’homme.

-

NE PAS ranger et utiliser d’essence

ou d’autres vapeurs et liquides

inﬂammables à proximité de cet

appareil ou d’un autre appareil.

-

QUE FAIRE SI VOUS SENTEZ UNE

ODEUR DE GAZ

• NE PAS essayer d’allumer un appareil.

• NE PAS toucher d’interrupteur

électrique.

• NE PAS utiliser de téléphone dans

votre bâtiment.

• Appeler immédiatement votre

fournisseur de gaz depuis chez un

voisin. Suivre les instructions de votre

fournisseur de gaz.

• Si le fournisseur de gaz ne peut être

rejoint, appeler les pompiers.

-

L’installation et la maintenance

doivent être conﬁées à un installateur

qualiﬁé, un réparateur agréé ou le

fournisseur de gaz.

FR

2

1 - Précaution de Sécurité

IMPORTANT

Veuillez lire les instructions avant toute utilisation.

Sécurité de la Table de Cuisson

AVERTISSEMENT

Aﬁn de réduire le risque d’incendie, de décharge

électrique ou de blessures aux personnes, veuillez

respecter ces précautions:

• Cet appareil n’est destiné qu’à un usage familial

normal. Voir La Garantie. Si vous avez des questions à

poser, veuillez contacter le fabricant.

• Maintenez les allumeurs propres et secs pour qu’ils

s’allument correctement et fonctionnent bien.

• Si un brûleur devait s’éteindre et le gaz s’échapper,

ouvrez une fenêtre ou une porte. Attendez 5 minutes

avant d’utiliser à nouveau la table de cuisson.

• N’obstruez pas le ﬂux de l’air de combustion et de

ventilation.

• Vous ne devez en aucun cas utiliser une feuille

d’aluminium pour couvrir une quelconque partie de la

table de cuisson.

• Si la table de cuisson se trouve à proximité d’une

fenêtre, assurez-vous que les rideaux ou tout autre type

de stores ne peuvent pas être pas soufﬂés sur ou à côté

des brûleurs: ils pourraient prendre feu.

Securité Personnelle

AVERTISSEMENT

Aﬁn de réduire le risque de blessures à personne au

cas où la graisse de cuisson prendrait feu, veuillez

vous comporter de la sorte:

• Si l’huile de cuisson devait prendre feu, ÉTOUFFER LES

FLAMMES en bouchant le récipient avec un couvercle

bien hermétique, un moule à gâteaux ou un autre

plateau en métal, puis éteignez le brûleur à gaz.

• VEILLEZ À NE PAS VOUS BRÛLER.

• Si les ﬂammes ne s’éteignent pas, ÉVACUER

IMMÉDIATEMENT LE LOCAL ET APPELER LES

POMPIERS.

• N’utilisez ni eau ni torchons ou serviettes mouillés

pour éteindre un feu dû à la graisse de cuisson, vous

pourriez provoquer une violente explosion.

• NE JAMAIS PRENDRE DANS LES MAINS UNE POÊLE

EN FEU, vous pourriez vous brûler.

AVERTISSEMENT

• Ayez TOUJOURS un DÉTECTEUR DE FUMÉE EN ÉTAT

DE MARCHE à proximité de la cuisine.

• FAITES FONCTIONNER LE VENTILATEUR DE LA HOTTE

lorsque vous ﬂambez des aliments.

Pour réduire le risque de brûlures lorsque vous

cuisinez, veuillez observer les conseils suivants:

ATTENTION

N’utilisez JAMAIS cet appareil comme

poêle à gaz pour chauffer la pièce.

Sinon, vous risquez un em-poisonnement

au monoxyde de carbone et surchauffe

du four.

• Ne laisser pas les jeunes enfants ou les animaux seuls

ou sans surveillance dans une pièce où un appareil

électroménager est allumé.

• Ils ne devraient jamais avoir le droit de s’asseoir ou de

se tenir debout sur une quelconque partie de l’appareil.

ATTENTION

Ne pas conserver des objets qui pourraient intéresser les

enfants au-dessus ou à l’arrière de la table de cuisson.

• Ne pas stocker des matériaux inﬂammables sur la table

de cuisson ou à proximité.

• Lorsque vous cuisinez sur la table de cuisson: NE PAS

TOUCHER LES GRILLES DU BRÛLEUR NI LA ZONE

AUTOUR.

• Ne prendre les récipients qu’à l’aide de maniques sèches:

des maniques humides ou mouillées sur des surfaces

chaudes créent de la vapeur qui peut vous brûler.

• Une table de cuisson avec un brûleur allumé ne doit

jamais être laissée sans surveillance: un liquide qui

bout et déborde crée de la fumée ou s’il est huileux

peut prendre feu. Un débordement sur un brûleur peut

étouffer la ﬂamme partiellement ou totalement ou bloquer

l’étincelle d’allumage. Dans le cas d’un débordement,

éteindre le brûleur et vériﬁer son fonctionnement. S’il

fonctionne normalement, vous pouvez le rallumer.

• Lorsque vous cuisinez, choisissez la position du bouton

de commande de façon à ce que la ﬂamme ne chauffe

La page est en cours de chargement...

Fulgor Milano F4GK24S1 Manuel utilisateur

Fulgor Milano F4GK24S1 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents